Dubai, United Arab Emirates
Our Products
The 2VG series, utilises metal to metal seat and body to bonnet connection for superior, bubble tight sealing capabilities at both extreme pressures and temperatures.
MAXIMATOR valves of the 36V series have a cold-machined stainless steel body.
Valve bodies are available in six different designs and can be equipped with regulating stem.
A special feature is the non-rotating stem which ensures a long life and thus a high reliability of the valve.
These MAXIMATOR high pressure valves with metal sealing have a high level of safety and reliability under adverse operating conditions
These valves may be employed both with gases and all fluids.
Their traceability is ensured through extensively documented data (batch number, max. pressure, material number, type designation).
Each high pressure valve of the MAXIMATOR series is completely equipped with gland and collar.
Sour Gas Valves are designed for oil and gas service where H2S is present.
All pressure containing components are made from annealed 316 stainless steel material in compliance with NACE MR0175.
These needle valves with metal to metal seats have a high level of safety and reliability under harsh operating conditions.
These valves may be used both with gases and liquids.
Traceability is ensured through extensively documented data (batch number, maximum pressure, material number, type designation).
All Sour Gas components are supplied with collars and glands unless otherwise specied.
MAXIMATOR fittings and bolted unions of the 10, 500 bar series are designed for simple and safe connection of HP pipes up to a max. pressure of 10, 500 bar.
All bolted unions are fit for multiple use. Fittings are supplied complete with collars and glands.
Anti-vibration bolted unions may be used to attain permanent connections even under extreme mechanical loads.
MAXIMATOR fittings and bolted unions are compatible with HP systems made by other manufacturers.
End Connetion : NPT / BSPP / BSPT
Maximum Working Pressure : 413 bar / 6000 PSI at 100 C
Sizes: 1/8" to 1"
The 90 angle pattern needle valve offers high pressure bubble tight sealing in a compact body allowing pipe work origination to change by 90 at the valve
MAXIMATOR valves of the 21V series have a cold-machined stainless steel body.
Valve bodies are available in six different designs and can be equipped with regulating stem.
A special feature is the non-rotating stem which ensures a long life and thus a high reliability of the valve.
Their traceability is ensured through extensively documented data (batch number, max. pressure, material number, type designation).
Each high pressure valve of the MAXIMATOR series is completely equipped with gland and collar.
End Connection: 1/2" NPT / G 1/2"/ 1/2" BSPT
Maximum working pressure : 413 bar / 6000 PSI at 100 C
The G 1/2" Instrument Connection provides Swivel Female Outlet for suitable positioning of Pressure gauge.
Maximum Working Pressure : 413 bar / 6000 PSI at 100 C
Check Valves is of 2 types
O-ring check valves provide high quality directional flow control and tight shutoff for liquids and gases.
All check valves are supplied with glands and collars.
These check valves are not to be used as a relief device. The opening pressure of the O-Ring Check Valves is approx. 10 psi (1.5 bar)
Ball check valves prevent reverse flow where bubble tight shutoff is not mandatory.
These check valves are designed with a ball cradled fl oating poppet to assure positive inline seating.
This poppet design allows full flow around the ball to minimize pressure drop.
Check valves are rated to 660F (350C).
All check valves are supplied with glands and collars.
These check valves are not to be used as a relief device.
The opening pressure of the Ball Check Valves is approx.10 psi (1.5 bar).
Form A version of the shut-off valves is supplied with LH/ RH union, and Form B version with shaft for the mounting bracket, with nipple and union nut. Shut-off valves with a test connection are intended for the simultaneous connection of operating pressure measuring instruments and test connection pressure gauges to the pressure pipeline.
