Post Buy Requirement
AD

Abu Dhabi Industrial Supply
Abu Dhabi, United Arab Emirates

Write a Review

Our Products

  1. Valves & Valve Fittings 9 Products available
  2. Industrial Valves 8 Products available
  3. Pen, Pencil & Writing Instruments

    2 Products available
  4. Badges, Emblems & Lanyards

    2 Products available
  5. Iron & Metal Alloys

    2 Products available
  6. Flange Guards

    2 Products available
  7. Fishing Accessories

    1 Products available
  8. PVC, PP & Plastic Products

    1 Products available
  9. Metal Flanges

    1 Products available
  10. Welded Pipes

    1 Products available
  11. Others Products 24 Products available

Our Products

Our Complete range of products are Fittings(Copper Nickel), Machined Weld-Neck, spiral wound, Motorized flying seat and Safety Stations.

Fittings(Copper Nickel)

  • Copper nickel 90/10
9010 & 7030 Copper Nickel Fittings in sizes designed to complement the pipe stock. Butt weld elbows, equal & unequal saddles, Butt weld equal & reducing tees and crossesButt weld concentric and eccentric reducers & caps16 bar butt weld reinforced forged branch connections20 bar butt weld reinforced forged branch connectionsThreaded reinforced forged branch connectionsSocket weld reinforced forged branch connections3000lb screwed fittings3000lb socket weld fittings9010 copper nickel and aluminium brass capillarysocket weld fittings9010 aluminium bronze twin ferrule compression fittings
View Complete Details

Pipe & Tubes

  • Category Cupro-Nickel
Copper Nickel 9010 & 7030 Seamless & Welded Pipe from 16 mm OD up to 914 mm with Wall thickness suitable for 14 bar to 20 bar pressure rating from stock, larger sizes can be manufactured. Heat Exchanger & Boiler Tubes in Diameters from 0.5 mm to 80 up to 150 mm (depends on alloy) with Min Wall Average Wall Thickness in 7 Mtr lengths and longer.
View Complete Details

Copper Nickel Flanges

  • Category Cupro-Nickel
Copper Nickel Flanges, in sizes designed to complement the pipe stock. 150lb & 300lb class solid slip-on flanges150lb & 300lb composite slip-on flanges150lb & 300lb composite weld neck flangesWeld-neck short & long type inner flanges9010 cu-ni cs composite blind flanges 150lb & 300lb classSolid slip-on flanges EEMUA & 150lb and 300lb classSolid slip on flanges 150lb composite slip-on flangesCarbon steel composite weld neck outer flanges 150lb & 300lbComposite spectacle blinds, rings and blind spades150lb composite slip-on flanges (brazing) carbon steel outer
View Complete Details

Copper Nickel

  • Size 0.5 mm to 80
Copper Nickel 9010 & 7030 Seamless & Welded Pipe from 16 mm OD up to 914 mm with Wall thickness suitable for 14 bar to 20 bar pressure rating from stock, larger sizes can be manufactured. Heat Exchanger & Boiler Tubes in Diameters from 0.5 mm to 80 up to 150 mm (depends on alloy) with Min Wall Average Wall Thickness in 7 Mtr lengths and longer.
View Complete Details

Flanges

  • Dimensions 150lb
Copper Nickel Flanges, in sizes designed to complement the pipe stock. 150lb & 300lb class solid slip-on flanges150lb & 300lb composite slip-on flanges150lb & 300lb composite weld neck flangesWeld-neck short & long type inner flanges9010 cu-ni cs composite blind flanges 150lb & 300lb classSolid slip-on flanges EEMUA & 150lb and 300lb classSolid slip on flanges 150lb composite slip-on flangesCarbon steel composite weld neck outer flanges 150lb & 300lbComposite spectacle blinds, rings and blind spades150lb composite slip-on flanges (brazing) carbon steel outer
View Complete Details

Machined Weld-Neck

  • Category Nickel Alloys
Fully Forged & Machined Weld-Neck, Slip-On & Blind Flanges in sizes designed to complement the pipe stock. Spades & Spectacle Blinds are also manufactured. In Grades such as Alloy 200 Alloy 201 Alloy 400 Alloy K-500 Alloy 600 Alloy 601 Alloy 625 Alloy 800H Alloy 800HT Alloy 825 Alloy C276 Alloy 330 Alloy DS Alloy 75 Alloy 59 Alloy 20
View Complete Details

Spiral Wound

  • Category Gaskets
Spiral wound gaskets are particularly used in Refinery, Petrochemical, Chemical, Steam lines and process industries. We supply gaskets with Inner & Outer Ring Materials in Carbon Steel, Stainless Steel 304, 304L, 316, 316L, 316Ti, 321, 347, MONEL 400, Inconel 600, 625, 800, Incoloy 800, 825, Nickel 200, Titanium, Hastelloy, Copper etc With Fillers in Asbestos, Graphite Mica. Graphite, Non asbestos, PTFE, Ceramic, DJHE, etc Manufactured in according to API, ASME, BS, DIN, JIS, MSS-SP etc Specifications.
View Complete Details

Motorized Flying Seat

  • Category Height Access Systems
This seat equipped with the e-lift 500 can be utilized in a wide variety of applications. Thanks to the electric winch, it permits access to significant working heights. All of the winches in the e-lift 500 line can be adapted this seat. Can be used with e.lift 350 oo e.lift 500 electrical winches. Optional: Wire winders for safety and working wire rope.
View Complete Details

Safety Stations

  • Category Personal Protection Equipment
Safety Station with WideArea EyeFace Wash, Hand and Foot Control, All-Stainless Steel All-stainless steel combination WideArea eyeface wash and shower safety station. Stainless steel construction is ideal for highly corrosive environments and clean room applications. Eyeface wash is activated by flag handle or foot treadle. Four GS-Plus spray-type outlet heads deliver a flood of water over a wide area of coverage for complete rinsing of eyes and face.
View Complete Details

DRENCH HOSE UNITS

  • Category Personal Protection Equipment
Eye WashDrench Hose Unit, Deck Mounted Dual purpose eye washdrench hose for deck mounting. Unit meets the provisions of ANSI Z358.1-2004 as both an eye wash and a drench hose. Unit may be left in the deck flange for use as a fixed eye wash, leaving users hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of users eyes, face or body.
View Complete Details

Identification Bands

  • Category To BS 1710
You need to know the contents of each and every pipe that exist in any facility, this means marking the pipes at regular intervals, with instantly recognizable signs. Pipe Identification Bands are those signs. Colour Coded polythene and PVC Pipe I.D Bands are manufactured in the U.K in accordance with BS 1710: 1984 and BS 4800 colour references. They are supplied in 25 Meter long 400 mm wide rolls.
View Complete Details

HVAC Ductwork Triangles

  • Category To BS 1710
Ductwork Triangles Identify duct content by simple colour coding. This provides an instant method of recognition in both emergency & routine maintenance. Self-adhesive 6 inch Equilateral TrianglesHot Air Supply RedCold Air Supply BlueWarm Air YellowFresh Air GreenFoul Air BrownConditioned Air RedBlueExhaust Extract Air : Grey
View Complete Details

Seamless & Welded Pipe

  • Category Name Nickel Alloys
Seamless & Welded Pipe from 14 NB Sch 10S up to 8 Sch 80S from stock. Larger sizes can be manufactured. Tube from 14 OD x 16 SWG to 4 OD x 116 WT In Grades such as Alloy 200 Alloy 201 Alloy 400 Alloy K-500 Alloy 600 Alloy 601 Alloy 625 Alloy 800H Alloy 800HT Alloy 825 Alloy C276 Alloy 330 Alloy DS Alloy 75 Alloy 59 Alloy 20
View Complete Details

Socket-weld Pipe Fittings

  • Category Nickel Alloys
A Full range of Butt-weld, Screwed & Socket-weld pipe fittings including Tees, Reducers, Bends & Elbows, in sizes designed to complement the pipe stock. In Grades such as Alloy 200 Alloy 201 Alloy 400 Alloy K-500 Alloy 600 Alloy 601 Alloy 625 Alloy 800H Alloy 800HT Alloy 825 Alloy C276 Alloy 330 Alloy DS Alloy 75 Alloy 59 Alloy 20
View Complete Details

Ring Joint

  • Category Gaskets
Ring type Joint Gaskets are designed to seal by initial line contact or wedging action between the mating flange and the gasket. Ring type Joint Gaskets In Carbon Steel, Soft Iron, Stainless Steel 304 316 310, Nickel Aloys 400 200 600 625 800 825, Titanium etc Manufactured in according to API, ASME, BS, DIN, JIS, MSS-SP etc Specifications. Sizes A wide range of sizes in Oval, Octagonal, BX & RX shapes are available
View Complete Details

Jacketed Gaskets

  • Category Gaskets
Metal Jacketed Gaskets are specially designed and widely used on smooth flanges applications and are ideal for Heat Exchangers, boilers, gas mains, valve bonnets, pumps etc We supply Gasket in Cladding Metals such as Soft Iron, Low carbon steel, Monel, Aluminium, Copper, Brass, Cupro-nickel 9010, 7030, Inconel 600, 800 and in different Grades of Stainless steel. With Filler Materails like Asbestos mill board, Non asbestos, PTFE, Grafoil, etc Jacketed Gaskets are supplied in a wide range of Sizes and Shapes
View Complete Details

Manual Winches

  • Category Height Access Systems
  • capacities 300 kg to 400 kg
Manual Winches for Temporary Suspended Platforms (TSP) with unlimited working height, manual and automatic wire rope insertion, equipped with the Scurichute fall-arrest system, with load capacities from 300 kg to 400 kg.
View Complete Details

Electrical Winches

  • Category Height Access Systems
Electrical Winches with load capacities from 300 kg to 1000 kg, in single phase & three phase ratting, with automatic wire rope insertion and unlimited working height. These winches are perfectly safe and easy to maintain, they are robust, light and easy to use.
View Complete Details

Permanent Suspended Platforms

  • lengths 1.4m, 1.8m, 2m, 3m
  • Category Height Access Systems
The BMU (Building Maintenance Unit) suspended cradles and platforms are assumed to be installed in a manner permanent and dedicated to one building or one specific structure. Our range of cradles and BMU platforms correspond to the European standards NF EN 1808. Available in different lengths (1.4m, 1.8m, 2m, 3m etc)
View Complete Details

Eye/Face Wash

  • Category Personal Protection Equipment
WideArea EyeFace Wash, Pedestal Mounted, Stainless Steel Bowl and Cover Free standing, pedestal mounted WideArea eyeface wash. Unit has stainless steel cover to protect bowl from dust, dirt and other contaminants. Four GS-Plus spray-type outlet heads deliver a flood of water over a wide area of coverage for complete rinsing of eyes and face.
View Complete Details

Eye Wear Spectacles

  • Category Personal Protection Equipment
Classic and simple in appearance but highly sophisticated in design. Only Pulsafe offers you Sensitive Tension Design for a balanced fit plus Parallel Vision Control for greater visual comfort, as well as exceptional features. Balance and lightness of frameStylish quality metal frame designHardcoat for better abrasion resistanceAdjustable, break-away Flexicord retainerOption of unique indooroutdoor (IO) lens
View Complete Details

Eye Wear Goggles

  • Category Personal Protection Equipment
A comprehensive range of goggles suitable for most industrial applications Fits all and can be worn over prescription eyewear180 field of vision for distortion-free peripheral visionResistant to molten metal and hot solidsAvailable in Hardcoat & Fog-BanLens options in polycarbonate or acetateBox type goggles for welding, flip-up window
View Complete Details

Face Shields

  • Category Personal Protection Equipment
A robust, heavy-duty, helmet mounted faceshield range with hearing protection compatibility Compatible with wide range of helmet designsVisor fixing method is secure and allows easy replacementFull-face protectionCreased visor eliminates gaps and visor profile follows contours of the face for maximum protection, allowing full unrestricted head movementAllows the visor to be tilted whilst leaving the earmuffs in place covering the ears.Visor selection can be tailored to the specific hazardapplication: mechanical, chemical, heat etc.
View Complete Details

Woven Glove

  • Category Personal Protection Equipment
PERFECT FIT is the unquestioned leader in the US and European technical woven glove markets. PERFECT FITs range of gloves provides exceptional cut, slash, heat and flame resistance for the toughest industrial applications. High Performance Glove MaterialsDuPont KEVLAR, KEVLAR Armor, Dyneema, Carbtex, Spectra, Twaron, Stainless Steel, Stainless Steel Mesh, etc General Purpose Glove MaterialsCotton, Polyester, CottonPolyester, Nylon, Acrylic, Thermostat, Jersey, Canvas, Leather etc ChemicalLiquid Resistant Glove MaterialsLatexNatural Rubber, Nitrile, Neoprene, PVC, Butyl, Tri-Polymer, etc
View Complete Details

Drilling Equipment

  • Category Oil County Tubulars
Pup Joints, Drill PipeBit SubsKelly Saver Subs (wrubber protectors)Crossover SubsDrill Collar Lift Subs and Lift PlugsCirculatingPump-In SubsSwagesCirculating SubsSide-Outlet SubsThread Protectors (cast steel wlifting bale)Stabbing GuidesDriftsRiser Pipe Scrub BrushesRiser Pipe Jet Cleanout ToolsBOP Cup Tester
View Complete Details

Fishing Tools

  • Category Oil County Tubulars
BootJunk BasketsReverse Circulating Junk BasketCore-Type Junk BasketSafety JointsImpression BlocksTaper TapsDie CollarsSwaging Tool CasingTubingCasing RollersSpears Wire RopeWire LineJunk MillsTaper MillsRound Nose MillsDrill PipeCollar MillsEcono MillsReamerStringWatermelon MillsSkirted MillsCasing Scrapers
View Complete Details

Pipe Markers

  • Series MS 995
  • Category To ASME A-13.1
MS-995 Maxilar pipe markers are maximum performance markers that stand up to high heat, harsh chemicals and direct exposure to sunlight PolyesterMaxilarTM construction provides proven protection from sunlight and maximum resistance to acids and bases commonly found in process operations. Service temperature range from -40 to 250 F. Precoiled markers install easily by wrapping completely around pipe and affixing to themselves with a MS-1000 sealing strip. Markers for larger diameter pipe are secured in place using stainless steel straps. Complies with ANSI A13.1
View Complete Details

MS 970 Pipe Markers

  • Series MS 970
  • Category To ASME A-13.1
MS-970 Coiled plastic pipe markers are ideal for rusty, dirty or sweating pipes where adhesive markers cannot be used. Self-locking strip keeps marker in place even on vertical pipes. Service temperature range: -400 to 1600 F. Complies with ANSI A13.1 standard for pipe identification with regard to color, letter height and marker size.
View Complete Details

Arrow Tape

  • Sizes 1″, 2″ and 4″
  • Series MS-900
  • Category To ASME A-13.1
MS-900 Arrow Tape is designed to indicate direction of flow when used with MS-900 pipe markers. Satisfies ANSI A13.1 requirement to show flow direction. Designed for both indoor and outdoor applications. Available in the following color combinations:Black arrows on yellowWhite arrows on greenWhite arrows on redWhite arrows on blueBlack arrows on greenBlack arrows on orangeBlack arrows on white Standard roll sizes are 1, 2 and 4 wide by 30 yards long.
View Complete Details

MS-215 MAX-TEK Tags

  • Series MS-215
  • Category To ASME A-13.1
The Highest Quality Tag Available Anywhere, For marking valves, instrumentation and equipment in harsh chemical environments. Rigid, high-performance 18 thick tags protect the graphics between two layers of chemically resistant material. Minimum 5-year protection from chemicals and sunlight. Complete printing flexibility, each unique tag can include multiple lines of text, equipment numbers, operating and maintenance instructions, safety precautions, or other critical information. Service temperature range: -40 to 200 F Background colors: Yellow, Green, Red, Blue, White and Orange. Each tag comes with a stainless steel grommet. Custom sizes and colors are also available.
View Complete Details

MS-215 MAX-TEK Safety Signs

  • Series MS-215
  • Category To ASME A-13.1
  • colors White, Yellow, Blue, Red, Green and Black.
For the ultimate in outdoor durability, MS-215 MAX-TEKTM signs are designed to shield the printed legends between two layers of LexanTM plastic. The LexanTM sealed sign provides the maximum protection available against moisture, sunlight, and the effects of harsh chemicals.Highly visible printed legends will remain effective outdoors for years because of the UV protection inherent in the LexanTM construction. Stainless steel grommets in each corner are standard to insure maximum life. Standard background colors: White, Yellow, Blue, Red, Green and Black.
View Complete Details

Flow Direction Indicator Tape

  • Category To BS 1710
To Compliment the Pipeline & Duct Identification Products, Flow Direction Indicator Self Adhesive Laminated Tape is supplied along with Double Sided Adhesive Tape, Content Labels, Valve Tags, Underground Warning Tape, etc
View Complete Details

Pipe & Tubes(Nickel Alloys)

  • Dimension 1/4″ OD x 16 SWG to 4″ OD x 1/16″ WT
Seamless & Welded Pipe from 14 NB Sch 10S up to 8 Sch 80S from stock. Larger sizes can be manufactured. Tube from 14 OD x 16 SWG to 4 OD x 116 WT In Grades such as Alloy 200 Alloy 201 Alloy 400 Alloy K-500 Alloy 600 Alloy 601 Alloy 625 Alloy 800H Alloy 800HT Alloy 825 Alloy C276 Alloy 330 Alloy DS Alloy 75 Alloy 59 Alloy 20
View Complete Details

K-500 Alloy Flanges

  • Series C276
Fully Forged & Machined Weld-Neck, Slip-On & Blind Flanges in sizes designed to complement the pipe stock. Spades & Spectacle Blinds are also manufactured. Fully Forged & Machined Weld-Neck, Slip-On & Blind Flanges in sizes designed to complement the pipe stock. Spades & Spectacle Blinds are also manufactured. In Grades such as Alloy 200 Alloy 201 Alloy 400 Alloy K-500 Alloy 600 Alloy 601 Alloy 625 Alloy 800H Alloy 800HT Alloy 825 Alloy C276 Alloy 330 Alloy DS Alloy 75 Alloy 59 Alloy 20
View Complete Details

Non-Code Steam, Air, Gas, Liquid Valves

  • Size 1/2″ to 1.1/2″
  • Category Safety Relief Valves
SERIES 17 & 18 Size 12 to 1.12 Series 17 & 18 are non-coded valves servicing air, gas, liquid and steam applications (with the exception of steam boilers) and are used where higher pressure and capacity is needed. Pressure to 750 PSI (AirGas) up to 300 PSI (Steam) Temperature to 460 Deg F
View Complete Details

Liquid Relief

  • Size 1/4″ to 3″
  • Category Safety Relief Valves
SERIES 69, 51 & 55 Size 14 to 3 Series 69 is an industry standard used for liquid relief, liquid by-pass and over protection. Series 51 & 55 are generally used where size or spacing is a factor.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us