Post Buy Requirement
AT
Dubai, United Arab Emirates
Add Review

Other Products / Services

Portable Breaching Torch Kits

The Broco MINI-TAC tactical torch kit is used by the U.S. Army, the FBI and other special units including the London Fire Brigade and Australian Navy. It is the smallest, most portable exothermic torch kit on the market today. The MINI-TAC is used in situations when the operator must make a small number of strategic cuts to enable him to complete his objective.


The Broco MINI-TAC is available with all-metal aluminum oxygen cylinders or filament wound aluminum composite cylinders.


The aluminum cylinders (torch set model no. PC/MTMODAL) are certified for North America only (DOT & TC) and recommended for all U.S. law enforcement & military customers who do not have their own oxygen booster pump. These cylinders are 15 cubic foot capacity at 2, 000psi (135 BAR).


The composite cylinders (torch set model no. PC/MTMOD1) are certified for North America and Europe (DOT, TC, EN). They have a capacity of 15 cubic feet at 3, 000psi (200 BAR) and so should only be purchased by North American customers with access to an oxygen booster pump. Commercial welding gas suppliers will not fill these cylinders. The export version ( model no. PC/MTMOD2) has BS 341-3 valve and regulator connection & 230V input battery charger.


The MINI-TAC contains two oxygen cylinders, submersible oxygen regulator, torch, oxygen hose, 2-pole striker plate with cover, battery assembly with charger, 18" rod extender, Molle carry pouch, leather shield, protective gloves, safety glasses, sample packets of 3/8" and 1/4" diameter cutting rods, collets to fit 3/16", 1/4" and 3/8" cutting rods, oxygen transfill hose assembly and a padded storage bag.

View Complete Details

ROV Cutting And Weld Automation

Broco is pleased to announce a new technology partnership with BluHaptics, Inc. of Seattle, Washington, to deliver an advanced Remotely Operated Vehicle (ROV) solution that will revolutionize the safety and performance of underwater cutting and welding.


This new ROV can be used in exothermic cutting, cold cutting and wet welding, and offers



  • feature

  • SAFETY AND SAFEGUARDING OF OPERATOR AND EQUIPMENT

  • FORCE FEEDBACK AND 3D SENSOR INTEGRATION

  • MAN-LIKE DEXTERITY

  • PROJECT COST REDUCTION

View Complete Details

Oxygen Regulator & Knife Switch


  • CONSTANT FLOW AND HIGH-VOLUME

  • EASE OF OPERATION

  • DESIGNED FOR YEARS OF RUGGED USE


  • The Broco Oxygen Regulator is a two-stage unit delivering the constant flow and high volume required for underwater burning. Broco's research demonstrates cutting efficiency depends more on oxygen flow than oxygen pressure. Broco's high volume regulator is offered to meet this basic requirement. Designed and manufactured for ease of operation, maximum efficiency, and years of rugged use, the Broco Underwater High-Volume Oxygen Regulator is Underwriters Laboratories Listed.


    Diver safety and operational performance both depend on the use of a high quality in-line knife switch. Broco offers the UW/KS, a single pole, single throw 400 amp switch built to the same high standards of all Broco products.



View Complete Details

BR-22 PLUS Cutting Torch

Broco, Inc., the world leader in underwater cutting and welding systems, introduces the next generation underwater cutting torch. This new torch features 21 design improvements, including the removal of all rubber from direct oxygen pathway, a PTFE lined fiberglass reinforced coupler hose, improved flash arrestor with higher oxygen flow rate and better flash back protection, non-return valve to prevent back flow, and improved collet and collet washer design.

View Complete Details

WATER LOAD TEST BAG

Innovative Design
SUBSALVE USA'sWater Load Test Bags are constructed using the same technology used in our world class lift bags. These bags makes it easier to load test structures due to their very low handling weight and make it possible to test in areas with insufficient access for conventional solid weights.

Equipped with all the necessary hardware and ready for immediate use.
Fabric

  • URETHANE-COATED NYLON-HIGH-STRENGTH AND HEAVY-DUTY

  • SUPERIOR ABRASION RESISTANCE

  • RESISTANT TO MOST PETRO-CHEMICALS

  • UV-RESISTANT

  • LOW MAINTENANCE REQUIREMENTS AND EASY TO CLEAN

  • RF WELDED SEAMS


Easy to use

  • PF-WLTB-1000 - PF-WLTB-6000 1 1/4 IN NPT PORT ACCEPTS A 1 1/4IN DISCHARGE HOSE FOR FAST DEFLATION.

  • PF-WLTB-10000 - PF-WLTB-20000 2IN NPT STAINLESS STEEL FLANGE ACCEPTS A 2IN DISCHARGE HOSE FOR FAST DEFLATION.

  • PF-WLTB-40000 - PF-WLTB-70000 3IN NPT STAINLESS STEEL FLANGE ACCEPTS A 3IN DISCHARGE HOSE FOR FAST DEFLATION OF THE LARGER WATER LOAD TEST BAGS.

  • PF-WLTB-100000 4IN NPT STAINLESS STEEL FLANGE ACCEPTS A 4IN DISCHARGE HOSE FOR FAST DEFLATION OF THE LARGER WATER LOAD TEST BAGS.


Lift Straps
Below PF-WLTB-4000

Multiple nylon lift straps sewn directly to bottom of lift bag, which bears load and provides safe working ratio of 6:1.


PF-WLTB-4000 and above

Designed with a replaceable heavy-duty nylon webbing lift harness fabricated into the skin of the bag, which bears the load and provides a safe working ratio of 6:1.



  • EACH SUBSALVE USA LIFT BAG IS TESTED PRIOR TO SHIPPING.

  • CUSTOM SIZES AVAILABLE.

  • ALL SUBSALVE USA PRODUCTS ARE COMPLIANT WITH IMCA D-016-AIRBAGS, ABS, U.S. DEPARTMENT OF DEFENSE STANDARDS.


View Complete Details

Door Blower

The Broco Door Blower, a powerful forced entry system for first responders and tactical teams. This new hydraulic/pneumatic door opener features 10 tons of push. The Broco Door Blower is a hydraulic jamb spreader supporting a steel-reinforced high pressure bag. Compressed air from a small cylinder powers the dynamic component. The Broco Door Blower packs the power of explosives without the liability.


Advantages of the Broco Door Blower include:




  • 10 tons of force implode door -- defeats most types of inward opening doors

  • ease of use -- takes only seconds to install and execute

  • quiet -- operation is virtually silent until the door/lock/jamb breaks

  • versatile--may be used on lock or hinge side

  • less worry -- reduced liability and approval issues compared to explosive entries

  • eliminates overpressure concerns -- ideal for apartment hallways and confined spaces




To execute the Broco Door Blower Forced Entry System, one operator holds the device against the door on the lock side while another operates the manual hydraulic pump to secure the device in place. The jamb spreader expands to support itself. The first operator steps back while the second works the pump until the tool is secured in the door frame. The entire system sets in just a few seconds.


With the entry team in position, the second operator cracks open the air cylinder valve (1/4 turn) causing the high pressure bag to inflate putting pressure against the door until it bursts inward. The operator clears the Blower from the entry point. The only noise is from the door/lock/jamb giving way when the breach is made.


The Broco Door Blower is for inward opening doors only.












The Broco Door Blower System includes:



  • welded steel Blower hydraulic frame/jamb spreader

  • steel-reinforced high pressure bag

  • lightweight aluminum hydraulic pump

  • compact compressed air cylinder

  • regulator, hoses and accessories


View Complete Details

Underwater BR-20 Welding Stinger

The Broco BR-20 Welding Stinger is designed to hold the electrode at the optimum angle to the work piece delivering quality welds while reducing operator fatigue. The movable jaw design accepts a wide range of electrode diameters. The BR-20 Welding Stinger meets Mil-H-865D and is Approved for Navy Use (ANU). All brass parts last longer under extreme conditions.

Item Part No. Description
1 242 Stinger head Assembly
2 240 Handle, Orange
3 158 Screw, Handle, Nylon, Slotted (2 required)
4 234 Pressure Pin
5 243. Body/Cable Assembly
View Complete Details

JIMMY' Tactical Pry Bar

The Broco 'Jimmy' is a personal tactical pry bar, 10-1/2 inches long with a 5/8 inch wide angled tip. The 'Jimmy' is strong, made from heat-treated hardened steel, and can withstand more than 400 lbs force without the handle bending or breaking. The cord-wrapped grip has a high density foam underlayment for comfort and dexterity.


The 'Jimmy' is ideal for creating that first gap in a security door or gate to make way for a Halligan or other entry tool, and maintain the gap when other tools need to be reset. It can also be used to pry interior doors, force windows and transoms, lift flanges, break glass and punch holes. The 'Jimmy' weighs less than half a pound and slides into the Molle on an operator's vest for easy stowage.


Broco's 'Jimmy' is easy to carry and easy to use. It's not just for breachers, everyone should carry a Broco 'Jimmy.'

View Complete Details

CF-3 Hydraulic Spreader

The Broco CF-3 (Crow's Foot) Hydraulic Spreader assists in opening all types inward and outward opening doors and is ideal for distorting/destroying security gates and window bars. Machined from hardened billet steel, the CF-3 has unbelievable strength and maximum reliability making it tougher than forged alternatives. The unique 90 degree hose swivel enables it to be easily utilized in all positions.


The CF-3's fast opening spreader ram has 5 inches of travel and delivers up to 5 tons of hydraulic power. It features a lightweight aluminum hydraulic pump body, and two sets of hose quick disconnects make for easier carrying and more compact storage.



  • Constructed from high strength steel

  • Rotating swivel prevents hose binding

  • Coupler at spreader assembly prevents hose kinking

  • Couplers on both pump and spreader make for easier carrying and storage

  • 10' long hose for extra reach standoff

  • Uses standard lightweight hydraulic fluid

  • Uses common size/type no-spill connectors

  • Replacement claw parts available for increased tool life

  • User serviceable


The Broco CF-3 Hydraulic Spreader Entry Tool Set includes: spreader assembly with 5 ton ram, hose swivel and quick connect, 10' hose with quick connects both ends, and lightweight manual pump with quick connect.

View Complete Details

Military And Tactical Breaching Torch Kit

The PC/TACMOD1 is the basis for the U.S. Marine Corps' Assault Breachers' Torch Kit and also is in use with Army Special Forces, the FBI, and other federal and local special response teams. It was created to meet the specialized requirements of the military's tactical cutting operations. This lightweight rescue and recovery torch system is engineered to provide the greatest cutting capability in a man-carried torch system. The PC/TACMOD1 provides the capability of cutting linear feet of 1" thick steel in less than 10 minutes.

View Complete Details

Door Rams

Broco ENFORCER series one-man door rams are engineered for rapid forced entry by tactical teams and first responders.


ENFORCER rams feature unique design ergonomics to maximize striking impact while maintaining a neutral wrist position throughout the arc of the Breacher's swing. Enforcer rams can be thrown overhand, underhand or from the side using a natural motion that derives energy from the hips and shoulders as well as the arms. Users find it's like swinging a baseball bat or throwing a punch.



Broco ENFORCER Door Rams feature:



  • Weight forward design is thrown in front of the Breacher to maximize impact from hips and shoulders. Hits like larger traditional rams.

  • Reach-through handle for easy one arm carry. Keeps the Breacher's weapon hand free.

  • Chrome carbide hardfaced impact edge prevents wear.

  • Fixed rear handle prevents rear wrist from rolling upon impact.

  • Rotating front handle maintains proper front wrist alignment throughout arc of the swing.

  • Knurled rubber non-slip grips.

  • Balanced sling point. Sling has quick release snap shackle.

  • Comfortable shoulder carry.

  • Welded 1" steel knuckle guard protects hand from door jambs.


The Broco ENFORCER breaches most residential doors within one to two seconds, and forces open doors with as many as seven different bolts, locking systems, and chains.




  • 24" length

  • 36 lbs.


The BABY ENFORCER is a compact version of the ENFORCER door ram designed for operations with space and weight constraints. It is easy to conceal and easy to carry, and its high mass provides effective operations in tight, difficult breaching conditions. Ideal for plainclothes work including Narcotics, Gangs, and Vice.



  • 16" length

  • 25 lbs.

View Complete Details

SAS' Door Breacher

Developed in England as the ultimate high-tech door breaching device, the 'SAS Tool' is an electric/hydraulic jamb spreader and door opener. It exerts almost 7 tons of force automatically switching between spreading and breaking. Can be used on either lock side or hinge side, operating silently until lock breaks.


The Broco SAS Door Breacher exerts hydraulic pressure through the frame cylinder between opposing faces of a door jamb in order to provide necessary support and resistance for pressure applied through the door piston to force the door open.


A hydraulic diverter valve within the tool automatically ensures the unit reaches correct pressure to hold it firmly before the door cylinder begins to pressurize.


The SAS Breacher consists of a rechargeable 24v hydraulic power pack, ten foot hydraulic lines with no-spill quick connects and dual piston door opener.


The SAS Breacher is for inward opening doors only.

View Complete Details

Molyslip Copaslip Molykote Specialty Lubricants

COPASLIP is an anti-seize compound specially formulated to protect against seizure even in extreme conditions of temperature and pressure. It also protects against rust, oxidation and other corrosion. COPASLIP consists of micro-sized particles of copper in a semi-synthetic base. To these basic anti-seize ingredients are added highly effective oxidation and corrosion inhibitors. The unique combination of properties in COPASLIP ensures rapid and easy assembly of threaded parts. It allows correct torque to be applied by eliminating thread interference.


COPASLIP prevents seizing and galling and gives quick and easy breakout of threads, gaskets and packings even after long exposure to high temperature, corrosive conditions or extreme surface pressures. It also reduces wear in areas of high friction. By protecting against seizure, maintenance work requiring routine or infrequent assembly and dismantling is made much easier and less costly.



Molykote Specialty Lubricants
Lubricants for a wide range of applications

You can count on Molykote brand specialty lubricants from Dow Corning to help get the job done right in industrial assembly and maintenance lubrication. These Smart Lubricationsolutions can help control friction and wear to save energy, extend lubrication intervals to reduce maintenance, and enhance equipment reliability to maintain productivity.


Choose the right lubricant based on load, environment, temperature and speed

Our extensive line of high-performance Molykote specialty lubricants gives you options for meeting your industrial lubrication needs for load, environment, temperature and speed.

View Complete Details

Norton Cutting Grinding Disc

Norton Metal Cutting-off & grinding wheels

Norton Metal provides a complete offer for all metal work applications from cutting and heavy duty grinding to light weld removal, offering a good price vs. performance ratio.


Benefits

  • Fast cutting

  • Optimal material removal rate

  • Comfortable working

  • Low vibration levels

  • Consistent performance for improved part quality



  • APPLICATIONS


  • Cutting

  • Grinding

  • Stock removal

  • Weld removal

MATERIAL DIM x TH x HOLE (mm) SPECIFICATION M/S PK QTY ART NO.
Metal 100 x 6 x 16 A24R-BF 80 25 66253370409
Metal 115 x 6 x 22.23 A24R-BF 80 25 66253370410
Metal 125 x 6 x 22.23 A24R-BF 80 25 66253370411
Metal 180 x 6 x 22.23 A24R-BF 80 20 66253370413
Metal 230 x 6 x 22.23 A24R-BF 80 20 66253370414
View Complete Details

Diamond Ripper Breaching & Rescue Saw Blades

The Diamond Ripper rescue blade cuts concrete and rebar in the same pass. It passes tough tests on plate armor, ceramics and high strength metal-fiber reinforced concrete and sets the standard for forced entry and rescue operations from Broco, Inc.


The Diamond Ripper is a proven high performance blade for breaching and rescue operations. It offers industry-leading features including a thin double-layer diamond cutting edge that yields quick cut times, an aggressive texture to shred materials typically cut with carbide-tipped blades, and a nickel alloy matrix that secures the diamonds to resist erosion and provide superior wear resistance. Diamond Ripper 12" and 14" blades are solid core - not laser welded - for maximum durability. And Diamond RipperTM rescue blades are economically priced for the most cost-effective performance.


With the Diamond Ripper there is no need to:



  • change blades between cutting metal and other materials

  • choose between long blade life and fast cutting speed

  • compromise high inertial force vs. blade flex and binding

  • pay high prices to get top quality



  • The Diamond Ripper cuts steel, aluminum, concrete, poly-carbonate and more for forced entry. Diamond Ripper combines the best elements of the quick wearing abrasive discs and expensive, heavy tungsten carbide edged blades. The double-layer brazed cutting edge assures aggressive cutting on tough materials, long blade life, and smooth performance to reduce fatigue. The blade's light weight means less gyroscopic effect and more control. The diamond electroplated facing protects the core, reduces heat, and prevents binding.


    Diamond Ripper rescue saw blades are intended for use on gasoline engine powered saws that have 1" or 20mm diameter arbors. Standard blade diameters are 14" (5460 RPM rating), 12" (6300 RPM rating), and 16" (4725 RPM rating).


    The Mini Ripper 4.5" and 7" diameter diamond rescue blades are designed for use with electric grinders to attack chains, locks, door bolts and more. Mini Ripper has the same type vacuum brazed diamond edge as the Diamond Ripper. Maximum RPM is 13, 300. It will fit tools with 5/8" and 7/8" (22mm) arbors.



View Complete Details

Industrial Ultrathermic Rods

Broco Industrial Prime-Cut and Prime-Cut PLUS Ultrathermic rods contain core wires which burn in excess of 10, 000 F at the tip. Broco rods cut, melt or liquefy virtually any known substance.


These internal rods are recessed at the torch end to prevent burn back into the torch. This safety feature is unique to Broco Industrial. Circular crimps secure the internal wires. Broco Industrial Ultrathermic rods can be bent without restricting oxygen flow or splitting enabling the operator to reach difficult or otherwise inaccessible places and ensure even burn.


Prime-Cut rods are available in 3/16", 1/4", 3/8" and 1/2" diameters and varying lengths. Size choice makes them efficient and adaptable to specific applications. Rods sized 3/8" x 18" and 3/8" x 36" are Broco's new Prime-Cut PLUS cutting rods, producing 20% longer burn time and 25% more cutting per rod.

3818/PC-10 3/8" x 18" Rods 10 lb. box (27 rods/box)
3818/PC-25 3/8" x 18" Rods 25 lb. box (68 rods/box)
3836/PC-10 3/8" x 36" Rods 10 lb. box (13 rods/box)
3836/PC-25 3/8" x 36" Rods 25 lb. box (33 rods/box)
3860/PC-25 3/8" x 60" Rods 25 piece bundle
1418/PC-10 1/4" x 18" Rods 10 lb. box (56 rods/box)
1418/PC-25 1/4" x 18" Rods 25 lb. box (137 rods/box)
1436/PC-50 1/4" x 36" Rods 50 piece box
1248/PC-40 1/2" x 48" Rods 40 lb. box (24 rods/box)
31618/PC-20 3/16"x 18" Rods Package of 20
     
PC/XT Rod Extender Increase reach by 36"
BOC-LO45N O2 Cylinder, Aluminum 45 cubic feet @ 2216 psig
View Complete Details

SALVAGE PONTOONS

Totally-enclosed, cylindrical bags are ideal for shallow water salvage, reducing the draft of a vessel or raising an object closer to the surface. They are invaluable in cable and pipeline operations and where long tows are planned.


Fabric

  • URETHANE-COATED NYLON-HIGH-STRENGTH AND HEAVY-DUTY

  • SUPERIOR ABRASION RESISTANCE

  • RESISTANT TO MOST PETRO-CHEMICALS

  • UV-RESISTANT

  • LOW MAINTENANCE REQUIREMENTS AND EASY TO CLEAN

  • RF WELDED SEAMS


Fittings

  • REPLACEABLE, HEAVY-DUTY NYLON WEBBING LIFT HARNESS IS BUILT INTO THE BODY OF THE LIFT BAG, WITH A SAFE WORKING RATIO OF 6:1

  • THE HARNESS MAINTAINS THE LIFT BAG IN A HORIZONTAL POSITION WHILE INSURING MAXIMUM STABILITY

  • EQUIPPED WITH SHACKLES, VALVES AND ALL NECESSARY HARDWARE FOR IMMEDIATE USE

  • 3/4" NPT INFLATION PORT WITH 3/4" STAINLESS STEEL BALL VALVES FOR INFLATION AND DEFLATING

  • STAINLESS STEEL QUICK DISCONNECT FOR INFLATION

  • PRESSURE RELIEF VALVES SET TO RELEASE AT 2.5PSI ABOVE AMBIENT PRESSURE

View Complete Details

SALVAGE PONTOONS - VERTICAL

Fabric

  • URETHANE-COATED NYLON-HIGH-STRENGTH AND HEAVY-DUTY

  • SUPERIOR ABRASION RESISTANCE

  • RESISTANT TO MOST PETRO-CHEMICALS

  • UV-RESISTANT

  • LOW MAINTENANCE REQUIREMENTS AND EASY TO CLEAN

  • RF WELDED SEAMS


Fittings

  • REPLACEABLE, HEAVY-DUTY NYLON WEBBING LIFT HARNESS IS BUILT INTO THE BODY OF THE LIFT BAG, WITH A SAFE WORKING RATIO OF 6:1

  • THE HARNESS MAINTAINS THE LIFT BAG IN A VERTICAL POSITION WHILE INSURING MAXIMUM STABILITY

  • EQUIPPED WITH SHACKLES, VALVES AND ALL NECESSARY HARDWARE FOR IMMEDIATE USE

  • TWO 3/4" NPT INFLATION PORTS WITH 3/4" STAINLESS STEEL BALL VALVES FOR INFLATION AND DEFLATION

  • PRESSURE RELIEF VALVES SET TO RELEASE AT 2.5PSI ABOVE AMBIENT PRESSURE

View Complete Details

RAPID RECOVERY SYSTEM

The Rapid Recovery System is a self-contained system including an enclosed commercial or professional lift bag with a pocket to hold the necessary air cylinder to fully inflate the lift bag at 100ft of depth.


RRS Includes:



  • TANK POCKET

  • INFLATION YOKE WITH CHECK VALVE AND HOSE

  • VELCRO VALISE TO CONTAIN THE BAG

  • OPTIONAL REMOTE ACTUATION VALVE

  • AIR CYLINDER OPTIONAL-NOT INCLUDED

View Complete Details

CABLE/PIPELINE FLOATS

Cable/Pipeline Float - Salvage Float Balloon



  • INCLUDES 3 STAINLESS STEEL LIFT RINGS AND INFLATION PORT.

  • USED FOR LIGHT SALVAGE AS WELL AS CABLE FLOTATION AND SUSPENSION

  • PART NO. SFB-300 - MANUFACTURED TO US MILITARY SPECIFICATION NSN 2050-00-574-7963 AND IN ACCORDANCE TO DWG. NO. 4563094.

View Complete Details

PIPE PLUGGERS

Nothing temporarily closes a cavity or seals an opening better than an inflatable plug. PIPE PLUGGERS are heavy duty, inflatable pipe plugs especially designed for use during the construction, maintenance, and repair of pipeline, ducts, and tunnels. PIPE PLUGGERS are constructed of high tenacity, urethane coated nylon fabric for high strength of over 1000lbs. per inch, and the urethane coating is resistant to fuel and most other petro-chemicals. Each PIPE PLUGGER is equipped with rigging hardware, 1/4" to 3/4" inflation ports, and pressure relief valves to prevent blow ups. PIPE PLUGGERS are also available with a by-pass design. Stock sizes are available from 12" to 96" diameter. Custom sizes, shapes, and configurations can be designed and manufactured to meet special needs.

View Complete Details

INFLAT-A-TANK

INFLAT-A-TANKmanufactures rugged, flexible storage containers for water, fuel, sanitary discharge, and other liquids. Every tank is manufactured of heavy duty urethane coated nylon fabric. The nylon fabric has a breaking strength of over 1000 lbs. per inch, and the urethane coating is resistant to fuels and most petro-chemicals. Each tank is equipped with inlet and discharge ports and are available with optional vents and tie downs. Stock sizes are available for boats, campers, mobile homes, and industrial applications. Tanks are affordable, easy to install, and require minimal maintenance.



  • EACH SUBSALVE USA LIFT BAG IS TESTED PRIOR TO SHIPPING.

  • CUSTOM SIZES AVAILABLE.

  • ALL SUBSALVE USA PRODUCTS ARE COMPLIANT WITH IMCA D-016-AIRBAGS, ABS, U.S. DEPARTMENT OF DEFENSE STANDARDS.

View Complete Details

Underwater EasyTouch Electrodes

For many non-structural repairs the resultant weld is allowed more leeway in terms of porosity, inclusions, integrity and appearance. To fill the void between to-code work and economy, Broco applied its significant experience and knowledge to design a quality electrode specifically for the economy market. The result is EasyTouch , a moderately priced electrode yielding excellent results. It is easy to light, easy to run (a controllable puddle with rippled bead appearance) and easy to clean. Like SofTouch, EasyTouch is a high deposition all-position electrode.


EasyTouch offers users advantages over other economy priced rods that are more difficult to run, harder to clean, and often need to be grounded and rewelded - all adding to bottom time and increased operating costs.

View Complete Details

DEVCON METAL REPAIR PUTTIES

Metal-filled epoxy putties allow fast, economical, permanent repairs to plant and equipment; cure quickly; and resist corrosion and harsh chemicals.


Devcon Plastic Steel Putty(A)

The original metal-filled epoxy putty, it is ideal for repairing areas where welding or brazing would be impractical. Can be drilled, tapped and machined. Conforms to the requirements of MIL-PRF-24176C, Type I.

Item Container Size
10110 1 lb
10120 4 lb
10130 25 lb
View Complete Details

Forced Entry Kit

The PC/TACMOD1 forced entry kit setup is fast and easy. The use of hand-tight fittings and quick connects means no tools are required for assembly or disassembly. The PC/TACMOD1 torch kit uses Broco cutting rods and RapidFire cutting rod igniters (optional). RapidFire's fuel element reacts with oxygen to produce a preheat source facilitating near-instantaneous non-electric ignition of the cutting rods. For economical operations, the included battery ignition components allow easy lighting of the cutting rods.


The PC/TACMOD1 comes complete with torch, high pressure oxygen cylinder, regulator, hoses, Breachers A.R.C. Molle backpack assembly, battery ignition accessories, rod extender, rod quivers, leather shield, gloves, safety goggles and custom foamed storage case.


The PC/TACMOD2 export version has BS 341-3 valve and regulator fittings and 230V input battery charger. The aluminum oxygen cylinder is EN compliant.

View Complete Details

Portable MIG Welder



  • Broco's GOWELDUSMC is currently in use with the U.S. Army, U.S. Navy, U.S. Marine Corps, U.K. MOD, combat engineering, force protection and vehicle repair specialists. GOWELD enables in-field welding capability by using a vehicle's own batteries as the power source. Fast, temporary repairs allow for movement of military vehicles under their own power, reducing time and exposure to both personnel and hardware.


    GOWELDUSMC is a 'spool gun' using wire electrode from a 4" spool housed within the welder body. It can connect to the vehicle by way of a NATO Slave plug or conventional battery clamps. GOWELD uses self-shielding flux-cored mild steel welding wire, gas-shielded steel welding wire, and gas-shielded aluminum welding wire.


    The GOWELD USMC Kit includes



  • GOWELD portale welder with 20' cable

  • 20' ground cable with clamp

  • Slave connector and adapter cable assembly

  • Battery clamp harness assembly

  • Spare parts set with contact tips, nozzle and insulator, and gas diffuser

  • Welding wire

  • Accessories and case

View Complete Details

Depth-compensating Oxygen Regulator

The PC/TACMOD1 contains a depth-compensating oxygen regulator to facilitate limited underwater cutting operations to 90 fsw. In addition to breaching/forced entry the PC/TACMOD1 can be used for amphibious special ops and maritime damage control operations. RapidFire cutting rod igniters are required for underwater ignition of cutting rods.

View Complete Details

MARK V/ORCA


  • THIS SELF-CONTAINED SYSTEM IS SPECIFICALLY DESIGNED FOR THE REMOVAL OF UNDERWATER MINES, WEAPONS OR EXPLOSIVES.

  • THE SYSTEM CAN BE DEPLOYED BY A SINGLE DIVER FROM A REMOTE LOCATION, SUCH AS AN INFLATABLE BOAT.

  • DESIGNED TO OPERATE TO FULL LIFT CAPACITY TO A DEPTH OF 175FT WITH THE STANDARD TWO CYLINDER KIT, AND THE 330FT WITH THE QUAD CYLINDER KIT.

  • EQUIPPED WITH ALL NECESSARY HARDWARE - READY FOR IMMEDIATE USE.

  • EACH SUBSALVE USA LIFT BAG IS TESTED PRIOR TO SHIPPING.

  • AVAILABLE IN MAGNETIC OR NON-MAGNETIC MIL SPECIFICATION MIL-M-19595

  • ROV DEPLOYABLE THE MARK V/ORCA BASE SYSTEM IS AVAILABLE IN 2, 500LB (1, 200KG) AND 4, 400LB (2000KG) VERSIONS AND INCLUDES:

  • ONE ENCLOSED LIFT BAG MANUFACTURED OF HEAVY-DUTY YELLOW 40 OZ. URETHANE-COATED NYLON FABRIC FOR HIGH ABRASION RESISTANCE AND FUEL RESISTANCE.

  • TWO 80 FT3 ALUMINUM OR 100 FT3 ALUMINUM OR 87 FT3 FIBER-WRAPPED CYLINDERS.

  • PRESSURE RELIEF VALVES

  • INFLATION MANIFOLD WITH HOSES

  • TANK HARNESS

  • ACTUATION VALVE

  • SURFACE COMMAND UNIT

  • MANUAL AND ELECTRICAL ACTUATION


Optional Items

  • CARRY BAG

  • RIGID STORAGE/SHIPPING BOX WITH CARRYING HANDLES

  • TIME DELAY ACTUATOR

  • PNEUMATIC ACTUATION

  • ACOUSTIC ACTUATION

  • SPARE PARTS KIT

  • TOOL KIT

  • REPAIR KIT

  • QUAD CYLINDER KIT (ALLOWS FOR DEEPER OPERATIONAL DEPTH)

View Complete Details

Ni-Touch Nickel Electrodes

Broco's Ni-Touch nickel wet welding electrode was developed to allow underwater wet welding of carbon and high tensile steels which would normally require the use of more expensive dry chamber welding. Nickel wet welding electrodes have been used by the U.S. Navy since the early 1980s for selective ship repairs. Now Broco brings customers an improved industry-leading nickel electrode which produces welds with less porosity and allows deeper welding in the overhead position. Ni-Touch electrode is appropriate for all position groove and fillet welds.


High tensile steels generally have carbon contents and carbon equivalents such that welding using carbon steel wet welding electrodes would result in cracking in the heat-affected-zone due to hydrogen embrittlement within a quench-hardened microstructure. With Ni-Touchthe nickel electrode mitigates the effect of hydrogen and results in successful underwater wet welds involving a broad range of high carbon equivalent steels, including HY-80 quenched, and tempered steel used in Naval ships with carbon equivalents exceeding 0.50 percent.



  • PRESENTLY QUALIFIED TO A WATER DEPTH OF 33 FEET.

  • TEST RESULTS EXCEED THE REQUIREMENTS OF THE AMERICAN WELDING SOCIETY SPECIFICATION D3.6 FOR CLASS B UNDERWATER WET WELDS.

  • MEETS THE MORE STRINGENT REQUIREMENTS OF THE NAVY'S NAVAL SHIP TECHNICAL MANUAL NSTM 074; AND

  • TYPICALLY, YIELD STRENGTHS EXCEEDING 70 KSI AND TENSILE STRENGTHS EXCEEDING 80 KSI CAN BE EXPECTED FROM THE NICKEL WELD METAL IN THE AS-WELDED CONDITION.

View Complete Details

RAPIDFIRE Cutting Rod Igniters

RapidFire cutting rod igniters are an expedient means of igniting an exothermic torch without the requirement for an auxiliary 12 volt battery. The RapidFire cartridge is unique to Broco and the key to the lightweight portability of our tools.

View Complete Details

Underwater Ultrathermic Cutting Rods

Burning in excess of 10, 000 F at the tip, Broco Underwater Ultrathermic Cutting Rods cut or melt virtually any known material. Broco's patented rod design features alloy core wires retained by circular crimps. The special design prevents burnback into the torch. Ultrathermic Cutting Rods can be bent 90 degrees or more to access hard to reach places without restricting oxygen flow or causing insulation to split or flake off.


Ultrathermic Cutting Rods may be used with a maximum of 150 amps to assist in the burning process and have no electrical requirement. Once ignited, they continue to burn as long as oxygen is supplied or until the rod is consumed. Broco Underwater Ultrathermic Cutting Rods are available in 1/4 inch and 3/8 inch diameters. Standard length is 18 inches. Broco offers 36 inch Ultrathermic Cutting Rods for heavier jobs allowing more burn time between rod changes.

View Complete Details

Underwater QuiverPak

The Broco Underwater QuiverPak is made of sturdy polyethylene and has a reclosable cap that can be tied to the main container to prevent loss. An indentation just below the cap allows for a carabiner to be easily attached to a dive harness and used as a quiver. It can also be used to lower a box of rods from the surface to a diver below.


At customer request, the Broco QuiverPak holds 50 Broco 3/8"x18" Ultrathermic Cutting Rods. The polyethylene quiver reduces the risk of rod corrosion while in storage.

View Complete Details

Underwater SofTouch Stainless Steel Wet Welding Electrodes


Proprietary formula key to reliability, ease of use


ertifiable welds with less labor costs



Broco's flux enhancing proprietary formulation, BroCote, is the secret behind the reliability and ease of operation of the SofTouch electrode. BroCote makes this electrode particularly impervious to water penetration and denigration and ensures certifiable underwater weld quality with less labor cost and time consumption.


SofTouch electrodes are used for on-site repairs in many applications where steel must be joined underwater according to code specifications. SofTouch welds consistently meet or exceed AWS D3.6-98 specifications for Type B welds, the American Welding Society's standard for certifying underwater welds. SofTouch is designed to pass all AWS test requirements, including radiograph, bends and hardness and is the wet welding electrode welding engineers and divers prefer.


Since 1989, SofTouch electrodes have been specified in the U.S. Navy's Ships Husbandry Manual Chapter 11, "Underwater Wet and Dry Chamber Welding." U.S. and Navy diving commands, shipyards, and contractors use SofTouch for repairs and maintenance on Naval vessels worldwide.


SofTouch electrodes are available in various sizes and alloys for both mild steel and stainless. SofTouch mild steel electrodes are available in 1/8 inch, 5/32 inch and 3/16 inch diameters. Stainless electrodes are sold in 1/8 inch and 5/32 inch sizes.


SofTouch wet welding electrodes are sealed in a Mil-Spec foil pouch to prevent contamination. The electrodes are then packaged in a rigid resealable plastic tube which provides maximum protection. The color-coded end cap denotes mild or stainless steel electrodes. Operating guidelines are printed on the label.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Hatim Badri (Akbar Traders Llc.)
  • 118 / 36 Al Burj Street., Nasser Al Manna Building. Shop no. 4, Al Sabkha Area, Deira, Dubai, U.A.E. P.O.Box: 13589, United Arab Emirates
  • Share us via