Post Buy Requirement
Al Garhoud Engineering & Marine Services LLC
Dubai, United Arab Emirates
Verified Add Review

Other Products / Services

Gate Valves

Types Of Valves:

Valve Gate
Valve Check Piston
Valve Ball Floating
Valve Check Swing
Valve Globe
Valve Ball Trunnion
Valve Check Dual Plate
Valve Check Ball Type
Valve Check Single Plate
Valve Butterfly Double Offset/High Perfm
Valve Butterfly Concentric
Valve Needle
Valve Butterfly Triple Offset
Valve Plug
Actuators

 

PRODUCTMATERIALCONSTRUCTIONNORMSGRADERANGE

Valves Carbon Steel Forged A105N A350 LF2 1/2”- 2” Gate, Globe Check Valves 1/2”- 60”Ball Valves Class 150-2500
Valves Carbon Steel Cast A216 A352 WCB, WCC, WC5, WC6, WC9, WC12(A) LCB, LCC 2”- 60” Class 150-2500
Valves Stainless Steel Forged A182 F304, F304L, F316, F316L. F321, F347, F5, F9, F11, F12, F22, F91, F92 F51, F53, F55 ALLOY 20, B148 1/2”- 2” Gate, Globe Check Valves 1/2”- 60”Ball Valves Class 150 -2500
Valves Stainless Steel Cast A351 CF3, CF3M, CF8, CF8C, CF8M, CD4MCU, CW12MW, Al Bronze 2”- 60” Class 150 -2500

 

View Complete Details

Stud Bolts/Nuts



CATEGORYPRODUCTS













Stud Bolts/Nuts Stud Bolt
Nut

Stud Bar






PRODUCTMATERIALCONSTRUCTIONNORMSGRADERANGE



















Stud Bolts A193 A320 B7, B7M, B8, B8M L7, L7M 1/4- 3 1/4- 2
Nuts A194 2H, 2HM, Gr4, Gr8, Gr8M 5/8- 3
View Complete Details

Bleed/Drip Ring

There is no difference between a Bleed Ring and a Drip Ring. They both are the same The vast majority of companies call them bleed rings because they allow bleeding pressure or mount pressure gauges or other sensors into a piping system.

A bleed ring is a ring section with one or more radial pipe connections designed to fit between standard flanges within the bolt circle, using conventional gasket material. The ring normally comes with a 1/2 inch socket weld or 3/4 inch tapped for connecting with valves and instruments. The face of the ring can also be made to match with any flange type, and has different sizes based on the ASME flange rating of the process piping.we are one of the reliable Bleed Ring and a Drip Ring Suppliers in UAE.

Bleed Rings can provide a beneficial way of draining piping, taking samples, attaching instruments or even bleeding of a valve. They can also be used with a valve and/or blind flange, this allows you to reduce and dispose of the pressure for your valve before you remove the flange. This is usually done with a replacement for a leaky valve.

AGEMS manufactures bleed rings in any material or size, and is designed for connecting valves and instruments. The face of the bleed ring can be manufactured to match with any flange type. The standard sizes for a bleed ring are NPS 1 to NPS 24 and ASME Pressure Classes 150 through 1500. It comes in many different materials such as carbon steel, stainless steel etc.

Highlights
  • Tensile strength
  • Long functional life
  • Corrosion resistance
  • Precisely designed
View Complete Details

Bleed Rings

Counted amongst the best Manufacturers and Suppliers of Bleed Rings in the market, we have gained immense reputation in India. These Bleed Rings are manufactured by using the latest technology and equipment. High quality Bleed Rings are available with us at the most affordable prices. Besides this, we take care of the international quality standards by using CAD & CAM techniques in manufacturing these Bleed Rings.

Highlights
  • Tensile strength
  • Long functional life
  • Corrosion resistance
  • Precisely designed
View Complete Details

Pipe Cutting Services

We are a trusted name for providing hassle-free Pipe Cutting Services In UAE. The Pipe Cutting Services, offered by us, are highly appreciated for their timely completion and high success rate. Besides this, we owe our success in the market to our highly skilled team which ensures that the Pipe Cutting Services, offered by us, fully satisfy the clients. Under our Precision Pipe Cutting Services, we use the latest technical equipment and proper safety gear to avoid any mishap. With us you can avail these Pipe Cutting Services at the most reasonable charges.
View Complete Details

Gaskets



CATEGORYPRODUCTS































Gaskets Spiral Wound Gasket
Ring Joint Gasket
Compressed Naf (cnaf) Gasket
Synthetic Fiber Gasket
Rubber Gasket
Compressed Asbestos Fiber (caf) Gasket
Ptfe Gasket
Flexible Graphite Gasket

Gasket






PRODUCTMATERIALCONSTRUCTIONNORMSGRADERANGE



























Gaskets Carbon Steel/Stainless Steel with Outer, Inner Ring & Winding Spiral Wound Gaskets 1/4- 48
Gaskets Compressed Fibre Jointing Material - Neoprene, Epdm, Viton, NBR & Silicon Non-Asbestos Soft cut Gaskets 1/4- 48
Gaskets Soft Iron, Stainless Steel- 304, 316/316l in R, RX, BX, API 16.20 & API 6A Ring Joint Gaskets

1/2- 24


View Complete Details

Pipe Spool

The key to the success of a whole project!
Industrial construction includes a wide range of projects, such as petroleum refineries and chemical and power plants. This type of construction involves intensive piping, which connects a variety of equipments and conveys process fluid and gas. Due to compressed schedule and limited space on site, industrial construction projects rely heavily on the offsite fabrication and assembly. As such, piping work is divided into two stages: pipe spool fabrication and site installation.

Pipe spool fabrication
Pipe spools are fabricated from a number of raw pipes and pipe fittings (e.g. elbows, flanges, tees, etc.) in fabrication shops. Raw pipes are cut to the required sizes and moved with pipe fittings to a fitting table, where some of the components are fitted together (i.e. temporarily connected). The resulting sub-assembly (part of the final pipe spool) continues with welding operations (i.e. permanent connected) before it comes back to the fitting table and gets fitted with other spool components.we are one of the trustable Pipe Spools, Fabrication Manufacturers In UAE.

Why our pipe spools are pre-fabricated?
Shop Pre-Fabrication of pipe spools is a proven means for reducing field installation costs while providing the highest of quality in the products fabricated.Pipe spools are often flanged to facilitate the connection to other spools. The fabrication of these spools is normally performed by specialist fabrication companies which are equipped with the required infrastructure.The specialist fabricators work under defined set of quality management criteria to ensure the accuracy of fabrication in order to achieve the roper fit at site and to maintain the required technical parameters defined by the client.

Cost Savings in Pre-Fabrication, Inspection & Testing:
Quality of the work is easier to manage & maintain in a controlled environment. High accuracies on specified tolerances will avoid rework at site.
Weather independent fabrication will minimize production delays.
Prefabricated Spools are the perfect answer to severe skill & labor shortage. Users do not have to mobilize significant work force for fabrication of spools on site.
Manufacturing in mass production, will result in lower manufacturing costs compared with site fabrication.
Prefabricated Spools will take lesser fabrication / assembly time, thereby avoiding time & cost overruns.
Prefabricated Spools will entail no or little investments in fabrication & testing equipment by users. Radiography, PMI, MPI, Ultrasonic tests, Hydro-tests etc. can be performed better & effectively in controlled environments.
Prefabricated Spools will be serviced under the strict vigilance of Third Party Inspection Agencies, ensuring 100% adherence to required quality standards.
Better control on welding parameters in controlled environments resulting in lesser probability of rework at site.
Weld less Induction Bends (as permitted by the client) would entail complete avoiding of welding pipe sections using SR elbows, thereby bringing in significant cost savings in welding, radiography of welding joints & material requirements.
Lesser dependency on power availability, avoiding unnecessary time delays.
Improved safety in better manufacturing conditions than on site.

Fabricating spools off site means less slag, abrasive dust, smoke & other contaminants that are unacceptable for example in highly hygienic food processing & other industries.

At AGEMS, we manufacture pipe spools with all major sizes and from different types and grades of steel. Our certified technicians with latest tools and calibrated equipment perform the welding and fabrication procedures. In addition to this, the pipe spools can be blasted and coated as per client requirements.

Contact our friendly staff for further information.
View Complete Details

Sandblasting Services

We are one of the reputed Sandblasting Services Providers In UAE. These Sandblasting Services are in high demand in various industrial processes. Our company caters to different needs of the clients and provides these Sandblasting Services at the most affordable charges. While providing impeccable Sandblasting Services to the clients, we make sure that we follow the current industrial norms and adhere strictly to the international standards for quality. We ensure that we provide these services at the most reasonable charges.We are relibale Sandblasting Contractors in United Arab Emirates.
View Complete Details

Water Jet Cutting Services

Water Jet Cutting Services, Dubai that we provide are highly appreciated by the clients for many reasons such as timely completion, flexible approach and personalized touch. These Water Jet Cutting Services are provided by us while adhering to the latest technology and international standards. For providing these Precision Water Jet Cutting Services, we have fully dedicated workforce which is able to undertake any challenging task. Besides this, we take full safety measures to avoid any kind of accident, while executing these Water Jet Cutting Services.
View Complete Details

Spectacle Blinds

Our company is one of the foremost Manufacturers and Suppliers of Spectacle Blinds in the market. Spectacle Blinds are important equipment as they are used to absolutely make sure that an item of particular equipment is properly blanked off. This is done to make sure that there is no leakage through the valve during maintenance. We provide optimum quality Spectacle Blinds at the most competitive prices. These Spectacle Blinds are made from the best quality raw materials and are highly in demand due to their flawless design and long life.

Highlights
  • Flawless design
  • Leak proof nature
  • Corrosion resistant
  • Durable
View Complete Details

Spectacle Blind Flange

Sizes: From 1/4" up to 64". Bigger than 64" can also be made available upon request.

Pressure rating: From #150lbs to #2500lbs

Steel grades: Carbon Steel (A516 Gr 60/65/70), Mild Steel (A36/S275 JR/ A285 Gr C), Stainless Steel (SS304, SS316). NACE Sour Service is available as well.

Flange faces: Facing for these flanges come in flat faced (FF), raised face (RF) and Ring-type-joints (RTJ)

Specifications: ASME B16.48

Dimensional Accordance: API 590 and ASTM 16.48 or custom requirements.

Paint finish: Standard paint for Carbon & Mild Steel flanges are black matt. Any other requirements are also catered to.

Other related products: Spade flanges, Spacers flanges, Paddle blank flanges, Paddle Spacer flanges, Orifice plate flanges & Bleed Ring flanges.

Some of the popular plate brands we use:

  • Dillinger Hutte, Germany/France
  • Corus, UK
  • Nippon Steel, Japan
  • Tata Steel, UK
  • Dan Steel, Denmark
  • Rukki, Finland
  • Columbus, South Africa
  • Aperam, Belgium
  • Outokumpu, Brazil
  • Nlmk Clabecq, Belgium

Highlights:

  • Flawless design
  • High-quality material
  • Technical support
  • Leak-proof nature
  • Corrosion resistant
  • Blasting & coating available if required
View Complete Details

Swage Nipples

Our company is counted among the most trusted Manufacturers and Suppliers of Sewage Nipples in the market. The Sewage Nipples, that we provide, are made from the optimum quality raw materials. These Sewage Nipples are concentric as well as eccentric. These Sewage Nipples are available in various ends and shapes. With us, you can avail high quality Sewage Nipples at the most affordable prices. Highlights



  • Seamless

  • Reasonably priced

  • Durable

  • Corrosion resistant

View Complete Details

Orifice Plates

Orifice plates are one of the most popular devices for the measurement and control of fluid flow. The shape and manufacturing tolerances of plates used in measurement applications are defined in the international standardization publications of ISO, AGA, ASME and others. From the formulas and data within these publications, the relationships and values of flow, differential pressure, and plate bore are determined.

In flow control applications, orifice plates are used as restriction devices to regulate fluid flow or reduce the flowing pressure downstream of the orifice plate. The use of a fixed restriction orifice can be beneficial and economic by reducing the demands on other flow system components.

Unlike measurement orifices, the sizing and design of restriction orifices are not defined by standardization organizations. Additionally, restriction orifices, abbreviated "RO", are often exposed to severe flow conditions associated with large pressure reductions and the related fluid conditions caused by liquids flashing to a gas, cavitation, and sonic (choked) flow. In torturous applications, mimicking the design of measurement orifices is not sufficient.

Orifice Plates are normally mounted between a set of Orifice Flanges and are installed in a straight run of smooth pipe to avoid disturbance of flow patterns from fittings and Valves.we are one of the famous Orifice Plates Manufacturers, Suppliers In UAE.

Paddle Type Orifice Plates
Paddle Orifice Plates are used with raised-face orifice flanges for measurement applications and installed between standard ASME flanges for restriction applications.
The plate and handle are a one-piece seamless design on 1/8-in. thick orifice plates for line sizes 2-inch though 6 inch and ASME classes less than 900. On all other plates, the handle is welded to the plate as standard; one-piece construction is available as an option. The flange ASME class and other standard information is stamped on the handle.

Types of Orifice Plates
Square Edge (Standard) Bore
For the common square edge concentric bore orifice, the bore and bevel is the standard method of limiting the plate edge thickness. Unless otherwise specified, plates will be beveled to the current accepted standards.

Quadrant Edge Bore
The quadrant edge bore is an orifice with the inlet edge rounded. Instead of beveling, the plate is counterbored to the desired edge thickness. The radius of the quartercircle bore is a function of the orifice-to-pipe ratio (d/D). Thickness at the throat is equal to the radius. This bore is specifically designed for viscous fluids such as heavy crudes, syrups, and slurries with Reynolds Numbers below 100, 000.

Eccentric Bore
Eccentrically bored orifice plates are plates with the orifice off-center, or eccentric, as opposed to concentric. The bore of the eccentric orifice normally is inscribed in a circle which is 98% of the pipe diameter, so that solids or slurries may pass through. Eccentric orifice plates are used in many industries including heavy and light chemicals, steel, paper, nuclear and petrochemicals.

Segmental Bore
Segmentally bored orifice plates are provided for measurement where solids are entrained in a gas or liquid flow stream. The circular portion of the bore is inscribed within a circle which is normally 98% of the pipe diameter. The segmental opening may be placed either at the top or bottom of the pipe. Industries using these bores include sewage treatment, steel, chemical, water conditioning, paper and petrochemical.

RTJ Type Orifice Plates

General Description
The RTJ type orifice plate incorporates an integral gasket, either oval or octagonal ring, for mounting between ring type joint flanges. It is based on proven technology, has no moving parts and is suitable for high temperature and pressure applications. Orifice plates are recommended for clean liquids, gases and low velocity steam flows.
Plate thicknesses depend on line size and differential pressure, and should be sufficient to prevent the plate from bending under operating conditions. Orifice plates can be made in accordance with customer drawings as required.
RTJ type orifice plates can be supplied complete with ANSI B16.36 orifice flanges.

Materials
RTJ type orifice plates are machined in one piece, or alternatively from two pieces, with an orifice plate screwed onto a carrier ring/gasket.
Standard material grades we offer for orifice plates include 316 Stainless Steel, 304 Stainless Steel, 310 Stainless Steel, Hastelloy C276, Hastelloy B3, Duplex Stainless Steel, Super Duplex Stainless Steel, Monel 400, Carbon Steel, Titanium, Incoloy 800, Incoloy 825, Inconel 600 and Inconel 625.
Common carrier ring/gasket materials include Stainless Steel and soft iron. To ensure correct sealing when installed between flanges, the hardness of the carrier ring/gasket material is limited to a maximum value, typically 120 for soft iron rings and 160 for Stainless Steel Rings
View Complete Details

Blind Spacers

Our company is one of the eminent Manufacturers and Suppliers of Blind Spacers in the market. The Blind Spacers, available with us, are made from high grade raw materials under the strict supervision of experts. We use modern technical equipment and manufacturing process to produce impeccable Blind Spacers. Besides this, to ensure flawless design and smooth functioning of these Blind Spacers, we also have CAD & CAM techniques with us.

Highlights
  • Dimensional accuracy
  • High strength
  • Durability
  • Corrosion resistant
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Rameez Arif / Mr. Faraaz Arif (Al Garhoud Engineering & Marine Services LLC)
  • Jebel Ali Industrial Area 1, Dubai - 76735, United Arab Emirates
  • Share us via