Post Buy Requirement
AG
Dubai, United Arab Emirates
Add Review

Other Products / Services

Wooden Lathe Machine

Features :Turning machine for making wooden hand rails legs and support systems design. Motorized machine with manual / motorized tool slide

View Complete Details

Crankshaft Grinder

Features :Mech / Hydraulic driven machine with double 4 jaws independent chuck adjustable for main and big-end grinding. Available in various length from 1500 mm to 3500 mm, with coolant pumps & autofeed.

MODEL CRG 48 CRG 60 CRG 84 CRG 90 CRG 120
Max distance between center 1200 1500 2000 2250 3000
Max distance between chucks 1150 1450 2050 2235 2950
Swing over table 492 492 575 711 775
Max weight of shaft 60 kg 120 kg 210 kg 340 kg 1000 kg
Height from floor to spindle centre 1125 1125 1125 1220 1220
Work head spindle 30-45-68 27-41-61 27-42-65 27-41-61 22-35-50-60
Max offset of centres 88 115, 112 138 155 165
Grinding wheel speed 1050 RPM 900 RPM 800 RPM 800 RPM 600 RPM
Table travel rapid 22 22 22 22 22
Table travel slow 0.75 0.75 0.75 0.75 0.75
Grinding wheel dia x width x center hole 650 x 22 x 152.4 650 x 22 x 203.2 750 x 25.4 x 203 800 x 25.4 x 203 900 x 25.4 x 300
Work head spindle dia. 62 62 72 72 87.5
Tail stock spindle travel 75 75 75 75 75
Wheel head motor 3 HP 5 HP 7.5 HP 7.5 HP 10 HP
Work head motor 1 HP 1 HP 1 HP 1 HP 2 HP
Main slide auto motor 1 HP 1 HP 1 HP 1 HP 2 HP
Grinding wheel auto motor 1 HP 1 HP 1 HP 1 HP 2 HP
Coolant pump moter 0.1 Hp 0.1 HP 0.1 HP 0.1 HP 0.1 HP
View Complete Details

Line Boring

Features: Geared driven auto feed machine available from 1500 mm to 3500 mm with various boring bar and electric motor

Model LB 5 LB 8
Max length of block 1500 2500
Max distance between top of bed to boring bar center 750 815
Min distance between top of bed and boring bar center 450 515
Boring capacity with standard equipments 32-150 52-225
Spindle speed infitely variable 450 450
Drive motor (380 V Three phase) 3 HP 3 HP
Feed motor (220 V single phase) 0.25 HP 0.25 HP
     
View Complete Details

Surface Grinder

Features :Segmental cup wheel type surface grinder for cylinder heads/ cylinder block facing complete with clamping mechanism, coolant pump and auto feed.

Model SG 4 SG 5
Max Automatic table traverse 1300 1500
Head vertical traverse 600 700
Max grinding width 350 350
Min / Max distance between table and grinding wheel 0-600 0-600
Distance from column to table center 350 350
Segmental wheel dia 350 350
Grinding spindle rotating speed 1500 1500
Milling spindle rotating speed 750 750
Min / Max table feed speed (steplessly variable), p.m. 0-3000 mm/min 0-3000 mm/min
Grinding spindle shaft motor 5 HP 5 HP
Head quick feed motor 0.5 HP 1 HP
Hydraulic system motor 0.75 HP 1 Hp
Electric coolant pump motor 0.12 HP 0.12 HP
View Complete Details

Double Head Cutting Machine

Features :Adjustable length, adjustable angle of cut, high speed aluminium profile cut-off machine, mechanically/pneumatically driven.

View Complete Details

Lathe Machine

Features :NAG seriesall geared head SS & SC precision lathe machine with automatic threading in inches, mm, dp, etc., hardened bed, 4 jaw & 3 jaw chucks, taper turning attachments and all standard accessories

MODEL NAG 6 NAG 8 NAG 10 NAG 12 NAG 10 H NAG 12 H
Height of center 200 300 300 300 375 375
Width of bed 250 350 350 350 450 450
Admit between center 1000 1500 2000 2500 2000 2500
Swing dia in gap 580 800 800 800 1075 1075
Swing over bed 400 600 600 600 750 750
Hole through spindle 50 60 60 60 80 80
Swing over cross slide 215 325 325 325 525 525
No. of spindle speed 8 Speed ranging 28 to 1205 RPM 8 Speed ranging 45 to 1000 RPM 8 Speed ranging 32 to 720 RPM
Gross weight (kgs) 1450 2250 2600 2900 2900 3200
Net weight (kgs) 1150 1860 2050 2300 2600 2900
Power required 3HP x 1400 RPM 5HP x 1400 RPM 7.5HP x 1440 RPM
View Complete Details

Veneer Press Machine

Features :Hydraulic multi-cylinder Hot press machine for veneer over wood with multiple cylinders and choice of fitting more than one sheet at one time Available in various sizes from 45 Tons to 120 tons

View Complete Details

Milling Machine

Features :GUM series universal Milling machine with all geared head, single feed / 3 feed automatic with/without rapid drive with milling vice optional accessories like slotting, rack cutting, vertical attachments, dividing head, rotary table, collet set, etc. also available.

MODEL GUM 1100 GUM 1300 GUM 1500
Table Size 1100 x 256 mm 1300 x 300 mm 1450 x 350 mm
T. Slots number and size 3-12 3-17 3-17
Feeds  
Longitudinal 500 625 750
Cross 200 250 350
Vertical 400 450 500
Feeds with/without rapid 4(12-125) 4(12-125) 4(12-125)
Cross 4(12-125) 4(12-125) 4(12-125)
Verticle 4(12-125) 4(12-125) 4(12-125)
Taper of Spindle ISO-40 ISO-40 ISO-40
Spindle Speeds 45-480 45-480 45-480
Arbour Dia 25 25 25
Spindle Motor 2 HP 1440 RPM 3 HP 1440 RPM 5 HP 1440 RPM
Feed Motor 2 HP 960 RPM 2 HP 960 RPM 3 HP 960 RPM
Pumps Motor 0.1 HP 0.1 HP 0.1 HP
Net Weight 1480 kgs 2220 kgs 2675 kgs
Gross Weight 1680 kgs 2520 kgs 3075 kgs
View Complete Details

Cylinder Boring Machine

  • Model FB500
  • Boring capacity 32-250 mm
  • Boring depth max. 500
  • Spindle travel max (D) 600 mm
  • C.I. to Columns ways 450 mm
  • Useful table surgace 1250 x 420 mm
  • Table cross Transverse max. 50 mm
  • Table transverse max. 1400 mm
  • Spindle rotation 100, 150, 200, 300, 400, 600
  • Spindle head Feed/Revotation 0.02, 0.04, 0.06
  • Spindle feed Rapid up and down 750 mm
  • Motor spindle 2 HP double speed motor
  • Motor Rapid up and down 1 H.P

Features :Cylindrical block boring machine with various spindles for various sizes of bores. Mechanically driven machine with autofeeds for different material of block. Available with compound sliding table, auto feeds, coolant pump and degree table for V-shaped engine blocks

View Complete Details

BRAKE PAN FOLDING MACHINE

  • Width of sheet Thickness of sheet
  • 1250 1 mm
  • 1.5 mm 2 mm
  •   2500
  • 1 mm 1.5 mm
  • 2 mm 4 mm
  • 3000 1 mm

Features :Counter weight type folding machine for sheets 0.3 mm to 2.5 mm thickness and 600 mm to 2500 mm lengths. Various lengths of pressing blade facilitates brake pan folding.

View Complete Details

Press Brake

Features :Hydraulic/mechanically driven press brake machine available from 1 mm to 20 mm thickness and lengths from 1220 mm to 4000 mm.

MODEL NO. Tonnage MT Bending Capacity Clearing Passing RAM Stroke(mm)

Weight

Length Width Height Motor (kW) HP
HyPB4 80 2030 x 5 1500 150 4000 2225 1550 2200 5 (3.75)
    2540 x 4 2030 150 4500 2750 1550 2200 5 (3.75)
    3150 x 3 2540 150 5000 3350 1550 2200 5 (3.75)
HyPB5 100 2030 x 6 1500 150 4700 2225 1600 2200 10 (7.5)
    2540 x 5 2030 150 5200 2750 1600 2200 10 (7.5)
    3150 x 4 2540 150 6000 3350 1600 2200 10 (7.5)
HyPB6 140 2030 x 8 1500 150 5500 2225 1800 2350 15 (11.25)
    2540 x 6 2030 150 6200 2750 1800 2350 15 (11.25)
    3150 x 5 2540 150 7200 3350 1800 2350 15 (11.25)
HyPB7 160 2030 x 10 1500 150 6000 2225 1850 2450 20 (15)
    2540 x 8 2030 150 7000 2750 1850 2450 20 (15)
    3150 x 6 2540 150 8000 3350 1850 2450 20 (15)
HyPB8 200 2030 x 12 1500 200 7000 2250 1900 2550 20 (15)
    2540 x 10 2030 200 8200 2800 1900 2550 20 (15)
    3150 x 8 2540 200 9200 3400 1900 2550 20 (15)
HyPB9 250 2030 x 14 1500 200 8200 2250 1950 2675 25 (18.75)
    2540 x 12 2030 200 9500 2800 1950 2675 25 (18.75)
    3150 x 10 2540 200 10500 3400 1950 2675 25 (18.75)
HyPB10 300 2540 x 16 2030 200 11000 2800 2000 2825 25 (18.75)
    3150 x 12 2540 200 13000 2400 2000 2825 25 (18.75
View Complete Details

Rolling Machine

Features :3 roll/ 4 roll machine available in thicknesses 1 mm to 40 mm with lengths of 1000 mm to 4000 mm. Pyramid type/ Pre-bending type machines available in mechanical/ hydraulic drive. Cone rolling/ Section rolling optional.

Model Width Thickness Top roll Bottom roll Main motor HP Top roll adjustment
PR315 1500 3 115 100 3 Manual
PR320 2000 3 130 105 3 Manual
PR325 2500 3 150 125 5 Manual
             
PR615 1500 6 140 115 5 Manual
PR620 2000 6 160 135 5 Manual
PR625 2500 6 175 150 7.5 Manual
PR630 3000 6 200 170 10 Manual
             
PR815 1500 8 160 135 5 Manual
PR820 2000 8 170 145 5 Manual
PR825 2500 8 185 155 7.5 Manual
             
PR1215 1500 12 185 155 7.5 Manual
PR1220 2000 12 215 170 10 Manual
PR1225 2500 12 240 180 15 Manual
PR1230 3000 12 260 225 20 Manual
             
PR2020 2000 20 240 195 15 Manual
PR2025 2500 20 275 215 20 Manual
PR2030 3000 20 290 250 25 Manual
             
PR2520 2000 25 280 230 20 Manual
PR2525 2500 25 310 260 30 7.5 HP
PR2530 3000 25 330 280 40 7.5 HP
View Complete Details

HYDRAULIC HACKSAW (POWER SAW)

Features :Single / Double cylinder, reciprocating arm type, hydarulic power hacksaw with 1 fitted blade, with auto cutting auto lifting - auto stop system, adjustable vice and coolant pump providing high quality and accurate cutting

MODEL HH 8 HH 10 HH 12 HH 14 HH 16-H HH 18-H HH 24-H
Max cutting dia. 8" 10" 12" 14" 16" 18" 24"
Stroke (adjustable) 5.1/2" 5.1/2" 5.1/2" 5.1/2" 5.1/2" 5.1/2" 5.1/2"
Stroke per minute 100 to 120 85 to 100 85 to 100 75 to 85 75 to 85 60 to 85 60 to 85
Electric Motor required 2 HP 2 HP 2 HP 2 HP 3 HP 3 HP 5 HP
RPM of Motor 1440 1440 1440 1440 1440 1440 1440
Blade Size 14" or 16" 16" or 18" 18" or 20 " 20" or 22 " 22" or 24 " 24" or 26 " 30" or 32 "
Capacity of round bar 8" 10" 12" 14" 16" 18" 24"
Capacity of square bar 6" 8" 10" 11" 13" 14" 16"
Weight 300 KG 500 KG 600 KG 700 KG 800 KG 1000 KG 1200 KG
Length 3'-2" 3'-10" 4'-2" 4'-6" 4'-10" 4'-10" 5'-6"
Breath 1'-3" 2'-3" 2'-3" 2'-5" 2'-5" 2'-5" 2'-6"
Height 1'-8" 3'-6" 3'-8" 4'-6" 5'-0" 5'-6" 6'-0"
View Complete Details

Lock Former

Features :Multiple die set mounted step folding machine forming various types of locks on sheets for ducting purposes.

Motor (Kw) Capacity (mm) Motor (Kw) Capacity (mm)
1.5 0.3-1.0 2.2 0.3-1.0
1.5 0.3-0.5 1.5 0.5-1.2
2.2 0.7-1.5 2.2 0.5-1.5
2.2 0.5-1.2 2.2 0.2-1.2
View Complete Details

Aluminum Cutting Machine

Features :Hand lever operated high speed cut-off machine for various profiles. Machine with various blade sizes and cutting capacities, complete with vice, guide and electricals.

Description AC300 AC350
Motor HP 2 3
Blade Spindle 32 32
Blade disc dia. 300 350
View Complete Details

Mechanical Eccentric Press Machine

Features :Mechanical eccentric press machine with mechanical pedal operated clutch system, with motor & guards

View Complete Details

Slotting Machine

Features :S series all geared slotting machine with compound sliding table fitted with rotary table and 3 jaw self centring chuck. Motorised drive with adjustable stroke

MODEL S 200 S 250 S 300
Stroke Length 200 250 300
Rotary Table 275 340 500
Longitudinal Movement 200 280 280
Cross Movements 200 280 280
Cutting Speed of Ram / Stroke per minute 26-36 26-36 26-36
Ram Adjustments 150 225 230
Throat Depth 200 350 400
H.P. Required 1H.P. 2H.P. 3H.P.
Distance from the tool rest to the main column 325 340 400
Weight (Approx.) 700Kg 1000Kg 1500Kg
View Complete Details

PILLAR DRILL PRESS

  • MODEL PDL 13
  • Drilling capacity in steel 13
  • Number of spindle speeds (Direct) 4
  • Spindle center to column 150 mm
  • Maximum travel of spindle 127
  • Spindle bore MT2
  • Diameter of column 65 mm
  • H.P. of the motor fitted 1 HP 1440 RPM
  • Net weight 100 kgs

Features :Bench drill press machine simple type belt driven 4 speed with single/3 phase electric motor and drill chuck.

View Complete Details

Radial Drill

Features :RDL series radial drilling machine with back geared driven head with 8 speeds, manual feed, box table, drill chuck with arbour and sleeve.

odel RDL 32 RDL 40
Max. drilling dia 32 40
Drilling radius 750 mm 750 mm
Spindle taper MT3 MT4
Main motor 1 HP 2 HP
Elevating motor 1 HP 1 HP
View Complete Details

Portable Boring Machine

Features :Versatile in-situ boring machine with various capacities from 55 mm to 134 mm dia of bore with depth upto 350 mm.

MODEL 005 003 001
Boring capacity dia 66 to 134 mm 55 to 106 mm 38 to 70 mm
Boring capacity depth 350 275 150
Cutting speed R.P.M. 300 300 300
Electric motor R.P.M. 1440 1440 1440
Electric motor power 3/4 HP, AC/Single Phase, 220/240 V 3/4 HP, AC/Single Phase, 220/240 V 1/2 HP, AC/Single Phase, 220/240 V
Net Weight 68 KG 54 KG 45 KG
View Complete Details

Profile Gas Cutting

  • Speed range 125-400 mm/min
  • Cutting capacity 200 mm at 90 o cut, 100 mm at 45o cut.
  • 150 mm thick steel circle from 150 mm to 2000 mm dia by using circle cutting attachments Fuel Gas
  • Acetylene/LPG by selecting the appropriate nozzle Power Supply
  • 220 V A/C , 50 Hz Gas Hose connection

Features :Profile gas Oxy Acetylene flame cutting m/c as per required profile . Magnetic profile template chaser, provided with table

View Complete Details

Single Head Cutting Machine

Features :Adjustable angle of cut, high speed aluminium profile cut-off machine, with head tilting movement optional.

Description ASH300 ASH350 ASH400
Motor HP 3 3 3
Blade Spindle 32 32 32
Blade disc dia. 300 350 400
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Al Gouri Machinery Trading L.L.C. (Al Gouri Machinery Trading L.L.C.)
  • P O Box 25140, Dubai, United Arab Emirates
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/uae/company/al-gouri-machinery-trading-l-l-c/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0006457984{main}( ).../index.php:0
20.01542068392include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.02732790728include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.03653726440header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice