SHARJAH, United Arab Emirates
Write a Review
Our Products
Our Complete range of products are Gerber Taurus II Leather Cutter, Gerber Cutter, Gerber Cutter DCS 1600 with Pivex Technology, Gerber Cutter DCS 2600 with Pivex Technology and Eastman Blue Streak II 629 Straight Knife Manuall Cutter.
Automated leather cutting system maximizes hide yield and throughput to give you the fastest return on your investment.The Taurus II static leather cutting system captures the hide shape and up to four flaw grades in seconds using a digital camera. It then analyzes the image and automatically nests parts to maximize hide yield. Cutting is fast and extremely accurate with Precision Knife Technology.When compared to manual or die cutting, field tests have shown as much as 10 percent yield improvements.
FEATURES
Advanced Nesting = Maximum Yield
At the core of Taurus II is an extremely powerful computerized nesting engine, developed and refined by Gerber, that is 250 times more powerful than previous offerings. The most advanced nesting system yet means more parts from every hide.
Rapid Hide Imaging = Improved Throughput
In a matter of seconds, the entire hide and its flaw markings are mapped and recorded using RapidScan software technology embedded in a state-of-the-art digital camera mounted above the cutting table.
Valuable Metrics = Business Improvement
Taurus II leather cutting system compiles comprehensive data that enables managers to track work in progress and identify opportunities to improve processes. Taurus II also digitally records the details of every hide, including usable area and defect area. Users can then compare these figures with those stamped on the back of hides to enable users to negotiate more effectively with hide suppliers.
Efficient Design and Engineering = More Uptime
Taurus II is a static leather cutting system with fewer moving parts, simplified motor assemblies and uncomplicated cabling all of which translate to maximum uptime and lower maintenance costs.
As a result, system reliability and uptime improves significantly while cost of ownership decreases.
A Choice of Systems = Optimized Floor Space
Taurus II is available in one- or two-station configurations that enable you to maximize your existing floor space. The single-station Taurus II offers the smallest footprint for flexible facility planning. The Taurus II dual-station system enables users to cut on one station while preparing a hide or offloading cut parts on the other to maximize productivity of the system.
Precision Knife Technology = Precisely Cut Parts
To cut large parts, like furniture, Taurus IIs rotary blade offers the fastest cut speeds. When cutting smaller, more complex parts, like transportation interiors, footwear and leather accessories, the patented reciprocating Pivex knife ensures parts are always cut precisely.
Advanced Automation = Lower Labor and Production Costs
Because Taurus II nests parts automatically and is easy to learn and use, companies not only reduce labor costs significantly by hiring fewer skilled workers, they also get consistent results that are not dependent on the performance of one or two individuals.
In addition, dies are time-consuming and expensive to manufacture, deteriorate with daily use, require periodic sharpening and consume valuable floor space to store. Each time there is a design change, templates must be modified and re-qualified. With Taurus, all of these issues become a distant memory.
The XLc7000 cuts a variety of materials up to two meters (79 in) wide at compressed fabric heights up to 7.2 cm (2.83 in).The GERBERcutter XLc7000 automated cutting system cuts up to 7.2 cm of compressed material accommodating a variety of fabric types and material widths up to two meters.With its low initial capital investment, low cost of ownership and superb accuracy and throughput, the GERBERcutter XLc7000 system delivers the best price-performance in its class.
FEATURES
Get accurately cut parts consistently
Gerbers Knife Intelligence senses deflection of the knife caused by cutting difficult materials or high-ply spreads and compensates for this deflection. This results in more accurately cut parts and makes it possible to nest parts closer together to achieve outstanding material utilization.
Save energy
An intelligent, high-efficiency variable vacuum control regulates vacuum power as needed to save energy.
Realize a fast return on your investment
Automated cutting enables you to cut more parts with less labor. An optional lateral travel kit enables the cutter to move among multiple spreading tables to optimize cutter usage.
The ideal cutting system for samples, prototypes and small production runs.The GERBERcutter DCS 1600 with patented Pivex technology is a high-speed, single- or low-ply static table cutting system that delivers uncompromising accuracy and throughput.The system has a small footprint so it occupies minimal floor space and is typically installed in only one day.
FEATURES
UnsurpassedCut Part QualityCuts challenging materials quickly and accurately. Minimizes or eliminates overcuts and hangers for ultimate edge quality.
Impressive Throughput
Patented Pivex cutting technology enables the knife to change direction in the material without lifting up even at high rates of speed resulting in faster throughput.
Rapid ReturnOn Investment
Single-ply cutting enables you to cut to order so you reduce work in process and shorten lead times.
Patented technology enables fast and extremely accurate cutting of even the most challenging materials.The GERBERcutter DCS 2600 with patented Pivex technology is a high-speed, low-ply cutting system that delivers uncompromising accuracy and throughput.
FEATURES
Unsurpassed Cut Part Quality
Cuts challenging materials quickly and accurately. Minimizes or eliminates overcuts and hangers for ultimate edge quality.
Impressive Throughput
Patented Pivex cutting technology enables the knife to change direction in the material without lifting the knife even at high rates of speed to cut the most challenging materials ultra fast.
Flexible Configurations
The cutting head of the GERBERcutter DCS 2600 comes standard with a pen and two punch tools. The system is available in standard 12- and 24-foot lengths and extendable up to 120 feet.
With versatility unmatched by any other straight knife, the Blue Streak II is the obvious choice when one cloth cutting machine is required to perform many tasks.The machine features a low profile, polished, streamlined baseplate is designed to reduce friction and distortion in the lay, regardless of the number of plies.Constructed of superior quality materials to ensure durability and longevity.The Eastman 629X Blue Streak II is available in eight sizes, four strokes, and a multitude of electrical specifications.
FEATURES
Accuracy
Cutting of intricate patterns and tight turns due to the low-profile baseplate and narrow silhouette standard
Continuous, Smooth Running
Perfect fit and continuous running with cross heads, crank and knife slides that are machined to a tolerance within .0005"(0.0013cm)
Simple handling of the machine due to its low center of gravity and the best power-to-gravity weight ratio in the industry
Low maintenance requiring only daily lubricating with the easy-to-use One Shot single-reservoir oiling system
The BBS32 is Eastman's largest shear, featuring a premium quality high torque universal motor, to cut both lightweight material and heavy-duty fabrics with ease.This machine is an economical alternative for cutting through fine fabrics (such as low ply delicate synthetics) without pulls or damage to the material. The Gentle Giant, like all Eastman round knives, is perfect for cutting large radius curves and straight lines.
FEATURES
Delicate and Woven Material Control
Eliminates fraying and material damage provided by the hexagonal blade that shears through fine fabrics and heavy wovens with ease
Consistent Speed
Maintained blade speed under heavy loads via the premium quality high torque universal motor
Accuracy
Eliminates cutting distortion due to the narrow silhouette standard and extremely low base plate
Stability
Vibration-free cutting with smooth and easy maneuverability
| Specification EC 6 Semi Automatic End Cutter | |
| Model Name | EC 6 Semi Automatic End Cutter |
| Cutting Head | Motorized Cutting Head |
| Cutting | Stepping Motor Driver |
| Cutting Length | Max 90" Present Length Control |
| Track Lifter | Long Bar |
| Standard Accessories | |
| Track & Lifter | Standard (With 96" Track) |
| Counter | Standard |
| Fabric Holders | Pairs of Fabric Holder |
| Fabric Holder Bar | Standard |
| Cord Hanger | Standard |
| Emergency Stop | Standard |
| Option Equipment | |
| Cloth Press Track | Option |
The Cardinal Carpet Cutter is designed to cut cleanly through most pile types and backings. The 548CC allows for cutting along and against the grain in curves, or along straight edges with minimal effort thus reducing operator fatigue.The blade is grooved to reduce heat and allow the blade to shed carpet backing. The blades can also be coated for maximum heat reduction and the ability to eliminate build up of cut material.
FEATURES
Heavy-duty Cutting Without Fusing
Heat reduction cutting with a narrow profile, grooved blade and an optional Teflon-coated blade
Ability to reduce speed to eliminate fusing, provided by the dual speed option
Accuracy
Eliminates cutting distortion due to the narrow silhouette standard - an extremely low base plate
Stability
Vibration-free cutting with smooth and easy maneuverability
Reduced operator fatigue provided by the optional long handle that allows the operator to cut in a standing position
Efficiency
Reduced operator fatigue with the option of a long handle, where cutting can be done while seated
Simple handling of the machine due to its low center of gravity
Single-hand engaging of power supply via the Patented Uni-Safe Terminal Block and Attachment Plug
Arslan Ul Islam (Al Borj Machinery Llc)Ground Floor,Gibca Building,Al Wadha Street, P.O.Box: 28551, Sharjah, United Arab Emirates, United Arab Emirates
Share us via
