Post Buy Requirement
AF
UAE, United Arab Emirates
Add Review

Other Products / Services

DRAW BENCH MACHINE

Draw bench is a machine used to do cold work on a metal, such as changing the shape of the metal without applying heat and applying only pressure.

It consists of a chain drive, driven by a motor and a set of gears. The other end of the machine consists of a die mounted on a thick steel plate. The work piece is inserted through the die and clamped on a trolley which then is hooked onto the chain for pulling across.

The die is usually made of tungsten carbide with a steel housing. The die can be made to any desired shape(round, square, rectangle, triangle, half round, L shape, oval etc.)

AL Mahir providing the parts, Service, Programming, Repairing, Fault tracing & troubleshooting.
View Complete Details

Control Panel

Al Mahir. designs, fabricates, and installs a wide variety of control systems. We ensure the equipment we provide will be user-friendly, operate efficiently, and safely for the individuals who maintain and operate it.

Al Mahir has the ability to engineerdesign, and or designbuild a single panel or multiple panels to safety standards. With our attention to detail and our thorough point to point testing our panel builders produce a high quality product to meet each customers specific needs.
View Complete Details

Current Transformer

  • System Voltage 720V 50-60Hz
  • sizes 15 x 25mm, 21 x 25mm & 31 x 31mm
3 in 1 current transformer is designed for used at the top of MCCB, the current transformer save a lot space and time.

Three phases (M3N1) current transformer suitable for primary ranged from 100A to 1200A with 5A secondary. Allowing installation directly on top of moulded case circuit breakers for greater speed of installation and optimisation of space. Applicable MCCB: ABB Isomax series, Merlin Gerlin NS series, CM1 series.
View Complete Details

Three Phase Current Transformer

3 in 1 current transformer is designed for used at the top of MCCB, the current transformer save a lot space and time.

Three phases (M3N1) current transformer suitable for primary ranged from 100A to 1200A with 5A secondary. Allowing installation directly on top of moulded case circuit breakers for greater speed of installation and optimisation of space. Applicable MCCB: ABB Isomax series, Merlin Gerlin NS series, CM1 series.
View Complete Details

Electrical Repairing Services

n Electrical Control Designing, Machines Repairing, Our services, Plc Programming
We have Expert Delta Automation Engineers. All are 8 years + Experience in the field of Automation.

We Do have Following expertise in Delta Brand products.



PLC Repairing & Programming

HMI Repairing & programming

Servo Motor & Drive Repairing+Prograaming

VFD Repairig & Programming

Servo Motor Repairing
View Complete Details

Marble Bridge

The front-back, left-right, up-down of Tile Bridge Cutting Machine can locate and be controlled by the microcomputer to work automatically. The workstation can also rotate 90 degree automatically. It can turn up to an angle of 85 degree. The main electrical elements and components of the machine are all of imported good-quality materials so that is pledges the whole machines precision and long life. The imported elements such as PLC, Relay, Contactor etc. It is applicable to cutting the valuable and large stone board. It can rotation 45 degree. So roation can be 360 degree. The saw blade dia from 350-600.it can cut think board 15CM. It use double oil cylinders, so the machine with high stability.
View Complete Details

Siemens Motors

  • sizes 56 to 450 / Power range 0.06 to 1250 kW
IEC Squirrel-Cage Motors.

Frame sizes 56 to 450 Power range 0.06 to 1250 kW

New generation motors 1LE11PC1.

Energy-saving motors with improved efficiency (Improved Efficiency EFF2)



1LE1 0.75 18.5 kW IP55 Self ventilated Aluminium body.

Standard motors (up to frame size 315 L)

Non-standard motors (frame size 315 and above)

Explosion-proof motors

Pump motors

Fan motors

Compressor motors

Smoke extraction motors

Marine motors (motors for drives on ships below deck)

Motor frame sizes (shaft heights)

56 63 71 80 90 100 112 132 160 180 200 225 250 280 315 355 400 450 .
View Complete Details

Converter

  • serial RS232
  • temperature -20 ~ 70 ℃
  • Dimensions 85 × 55 × 25
FS-485C is RS232 to RS485 converter to realize communication conversion from RS232 to RS485 and RS422. The power of this product directly from RS232 serial port without additional power. Use the unique zero-delay automatic sending and receiving conversion technique and baud rate adaptive technique. Plug-and-play, suit for all software, the efficient circuit ensure that the communication range is up to 2km, and in the high resistance state when not sending data. Support multi-point communication, which is different from other similar cheap products in market. There is a built-in anti-static anti-lightning circuit in the product. Uniquely with power and sendingreceiving indicator lights, the shape is the industrial structure of standard rail installation.
View Complete Details

Cutting Machine

The front-back, left-right, up-down of Tile Bridge Cutting Machine can locate and be controlled by the microcomputer to work automatically. The workstation can also rotate 90 degree automatically. It can turn up to an angle of 85 degree. The main electrical elements and components of the machine are all of imported good-quality materials so that is pledges the whole machines precision and long life. The imported elements such as PLC, Relay, Contactor etc. It is applicable to cutting the valuable and large stone board. It can rotation 45 degree. So roation can be 360 degree. The saw blade dia from 350-600.it can cut think board 15CM. It use double oil cylinders, so the machine with high stability.
View Complete Details

Spring Assembly Machines

The semiautomatic spring assembly machines , clear concept to a compact unit and designed for the assembly of spring cores from Bonnell springs.

The springs are individually placed manually on the slides of the pre-loading device. The actuation of the foot pedal triggers the microprocessor-controlled operation. The lower and the upper spiral are formed by two independent wind machines and inserted into the end rings of the Bonnell springs. When all the springs are detected, the spiral is cut off and bent (geared). Subsequently, the mounted spring row is transported one step forward.

Al Mahir providing following services for spring assembly machine.

Refurbishing.

Repairing.

Providing new Parts.

Fault tracing & troubleshooting.

Programming & commissioning.
View Complete Details

Spring Assembly

The semiautomatic spring assembly machines , clear concept to a compact unit and designed for the assembly of spring cores from Bonnell springs.

The springs are individually placed manually on the slides of the pre-loading device. The actuation of the foot pedal triggers the microprocessor-controlled operation. The lower and the upper spiral are formed by two independent wind machines and inserted into the end rings of the Bonnell springs. When all the springs are detected, the spiral is cut off and bent (geared). Subsequently, the mounted spring row is transported one step forward.

Al Mahir providing following services for spring assembly machine.
View Complete Details

Ultrasonic Spot Welder

Another benefit is the time of glycerol separation.This is also faster and one of the reasons for it is that less methanol is been used, so glycerol separation is faster.

Hand held ultrasonic welding machines, also known as portable ultrasonic welding machines, hand held ultrasonic welding machines, handheld welding machine, portable welding machine, ultrasonic spot welding, riveting machines, ultrasonic point welder, can be used for the butt welding of thermoplastics, welding head can also be replaced according to customer demand for riveting, spot welding, embedding, removal process, compared to other traditional crafts (such as adhesive, scald together or screw fastening, etc.), with high production efficiency and welding quality good, environmentally friendly and energy-saving advantages.
View Complete Details

Planetary Gearboxes

RTA presents in exclusive the new range of planetary gearboxes SG series that combine high performance with optimal reliability
and represent a perfect PLUG AND GO solution with stepper and servo motors SANYO DENKI.

TECHNICAL SPECIFICATIONS:

A wide range always available in stock at RTA



Professional assembly and testing conducted in RTA to stepper and servo motors SANYO DENKI
Excellent radial and axial load carrying capacity
Low noise
High precision
High nominal and accelerants torque
IP64 protection degree
View Complete Details

Automatic Tracking Frequency

Intelligent automatic tracking frequency ultrasonic Generator,

It uses high-performance microprocessor anti-interference,

Realization of electronic manipulation,

All welding control parameters are managed by the microcomputer,

Intelligent frequency control system, eliminating the inconvenience of manual FM,

Sonic overload automatic detection,

Tracking real-optimal resonance point,

Vibration set temperature remains the lowest point,

Frequency welding head temperature changes ,

The machine automatically adjusts to run more stable.
View Complete Details

Ultrasonic Horns Sealer

on FOAM & MATTRESS INDUSTRY, ULTRASONIC SEALERS, Wearhouse
We are Dealing with

Ultrasonic Sealers , Horns , Generator , Boaster , Sealers , Converters and other Machines.

We have expert team of ultrasonic systems. We do repair and service it. We can Adjust Frequencies and other repairing where required.
View Complete Details

Industrial Sensors

on CONTROL & AUTOMATION, SENSORS, Wearhouse
We have a big stock of Industrial Sensors



Inductive all type of sensors
Capacities all type of sensors
High Speed sensors
photoelectric sensors
temperature sensors
length measuring sensors
Ultrasonic sensors
Brands :
View Complete Details

Telemecanique Limit Switch

on CONTROL & AUTOMATION, SENSORS, Wearhouse
Miniature Type
XCMD and XCMN series miniature limit switches.

Wired terminals
1 NO and 1 NC contact
Pre-cabled (1 metre)
Rated at: 240 Vac 1.5A

Schneider Electric Osiconcept

Protection to IP66IP67.
View Complete Details

Inverter

  • series N2
  • Model No. N2-402-M3
T-verter N2 series is a high performance general-purpose inverter that incorporates a high efficiency Pulse Width Modulated (PWM) design and advanced IGBT technology. The output closely approximates a sinusoidal current waveform to allow variable speed control of any conventional squirrel cage induction motor.

Model No. Identification: N2-402-M3

N2; series

2 or 4; Input voltage 2 200v, 4 400v

01; capacity 0.5hp 30hp

Specification; M. standard Type, H. Advanced Type.
View Complete Details

Panel Cooling Fans

The broad range of SANYO DENKI fans proposed exclusively in Italy by RTA, offers the ideal solution for all types of application that requires a system characterized by high reliability, low acoustic noise, high-average expected life (up to 200, 000 hours) and high efficiency.
All models are equipped with double ball bearing and are UL CSA, TUV, RoHS certified.
View Complete Details

Safety Air Blow Off Guns

Many low cost air guns are sold extensively throughout the world but do not necessarily last. In addition they are not all safe to use and may result in dangerous high dead end pressures.

Nex Flow Safety Air Blow Off Guns are durable, safe and comfortable to use incorporating our efficient air nozzles and air jets to produce high output air and laminar flow while minimizing compressed air use and noise levels.

The most important reason to use Nex Flow Safety Air Blow Off Guns with our air jets and air nozzles is safety. All Nex Flow Air Jets and Nozzles meet OSHA standard CFR 1910.242(b) for dead end pressure. Noise levels are dramatically lower with air nozzles and air jets in addition to lower energy use.

There are two types of Safety Air Blow Off Guns to choose from depending on an individuals personal taste and comfort. The Easy Grip Safety Gun or the Hand Comfort Button Gun.
View Complete Details

Pneumatic Accessories

Pneumatic Accessories for the Nex Flow compressed air product line featuring Magnetic Bases, Swivel Fittings, Reclassifying Mufflers, Rigid Flex Hose, Electronic Temperature Control.
View Complete Details

Industrial Housekeeping

Nex Flow offers specialty items to improve industrial housekeeping and specialty applications utilizing air amplification and vacuum technology. All these items utilize compressed air eliminating the problems of high maintenance and often short life span from electrical vacuum and blower systems in these applications
View Complete Details

Brand New Nex Flow

In the package are all the necessary items to attach the vortex tube along with a
separate venting unit (breather cap) to exhaust the hot air being displaced inside
the enclosure.
An optional hose distribution kit is available to distribute the cold air inside for
larger enclosures. Also available is an optional solenoid and thermostat for on-off
control.
Frigid-XTM Box Cooler Advantages
. No moving parts
. Maintenance Free Operation
. Compact & Easy to Install
. Cooling Capacities to 2900 BTUhr.
. No CFCs or HCFCs
. Stainless Steel Construction
. No Electricty
. Adjustable Cold Temperatures
Nex Flow has trained representatives around the world to assist
you in your applications and any cooling products you may have that
can utilize vortex tube technology. Contact Nex Flow or our
View Complete Details

Safety Relay

on CONTROL & AUTOMATION, RELAYS & CONTACTORS
XPS AF, Single Channel

Provides 3 NO safety outputs
Slim design (just 22.5mm width)
Terminals accept cable up to 2.5mm

Approvals

BG, UL, CSA

Standards

IEC 204-1; EN 292; EN 418; EN 60204-1; EN 1088
View Complete Details

T-verter Inverter

on CONTROL & AUTOMATION, FOAM & MATTRESS INDUSTRY, Machines Repairing, VARIABLE FREQUENCY DRIVES
T-verter N2 series is a high performance general-purpose inverter that incorporates a high efficiency Pulse Width Modulated (PWM) design and advanced IGBT technology. The output closely approximates a sinusoidal current waveform to allow variable speed control of any conventional squirrel cage induction motor.
View Complete Details

Power Supply

  • temperature -25 to +70 °C
SITOP smart is the high-performance standard power supply for automated machines and systems with 24 V or 12 V electronics. Despite its compactness, it offers outstanding overload characteristics. Its capacity of 1.5 times the rated current for 5 smin also enables trouble-free connection of consumers that demand high power. And with the permanent load capacity of 120% nominal output, these compact power supply units are among the most reliable of their kindTo further increase the availability, the SITOP smart power supply units can be combined with DC UPS, redundancy and selectivity modules.
View Complete Details

Industrial Control Panel

Al Mahir. designs, fabricates, and installs a wide variety of control systems. We ensure the equipment we provide will be user-friendly, operate efficiently, and safely for the individuals who maintain and operate it.With our ability to understand individual projects, and think outside the box, we are able to provide innovative solutions to address automation and system integration challenges.
View Complete Details

Tool Cooling System

ool Cooling System Frigid-X for dry machining applications replaces polluting and often toxic mist systems to improve dry machining operations. No mess, no residue and low in cost.

Tool Cooling System Frigid-X is efficient and can improve dry machining operations and assist in spot cooling applications for a variety of industrial machining processes but increasing matchining rates and extending tool life.

Produces cold air at approximately 75 below supply air temperature. The unit is muffled for quiet operation. No moving parts assures long life, maintenance free operation while extending tool life and improving production rates.

Tool Cooling System Frigid-X can often replace costly mist coolants and certainly improves the quality and output of all types of dry machining operations form metals to plastics. Unit is low cost, no electricity with no moving parts and is essentially maintenance free.
View Complete Details

Static Control

HAUG static control products from Nex Flow featuring Haug Static Bars, Haug Air-Blade Ionizers, Haug Power Supplies, Haug Haug power supplies come in several versions demanded by modern industrial standards. They have standard 2 outlet and 4-outlet systems, special NEMA 4 class versions, and explosion proof applications. Power Supplies are repairable and fully shielded unlike most competitive products
View Complete Details

Air Wipes

Standard Ring Blade Air WipeFor regular applications. Standard Ring Blade Air Wipe from Nex Flow is easy to mount and maintain and reduces both compressed air consumption and noise levels. It produces a laminar flow of air along its 360 angle using the Coanda effect which entrains a large volume of air from the surrounding area along with the small amount of compressed air from the Ring-Blade air-saver wiper-blade to produce an output flow up to 30 times.
Air Wipes, Nex Flow
X-Stream Ring Blade Air WipeDesigned for use up to 400F (204C) It produces a laminar flow of air along its 360 angle using the Coanda effect which entrains a large volume of air from the surrounding area along with the small amount of compressed air from the X-Stream Ring-Blade air-saver wiper-blade to produce an output flow up to 30 times.
View Complete Details

Ball Valve Actuator

We have Ball valves and Actuators in stock.

different brands & models are available.



TruTorq Spring Return Pneumatic Valve Actuator TSR-4-F04-44 Type C Metric NNB

TruTorq Spring Return Pneumatic Valve Actuator TSR-20 F07-44 Type C Metric NNB

TRUTORQ TSR 2 F03 44

Kitz Valve ss

Kitz Actuator

tork actuators

tork valves
View Complete Details

Fume Extraction System

The Model 40002FMS STREAM VAC is a versatile and affordable compact air cleaning system is ideal for the removal of fumes, dust and other air pollution from work stations without the need for heavy and bulky machinery. The Nex Flow Stream Vac is an in line air conveyor that when hooked up to a 2 hose up to 25 feet (8 meters) long and connected to a compressed air line, will remove up to several hundred cubic feet of air while using only a minimal amount of compressed air, taking with it welding fumes, soldering fumes, particulate from local grinding operations, smoke and particulate from almost any spot application.

Why Use: A safe and improved healthy condition in the workplace improves employee morale, increases worker productivity, decreases absenteeism and even reduces insurance costs in many cases. A cleaner environment can even enhance the performance of machinery and sometimes cut maintenance costs. The Nex Flow Stream Vac is low cost solution to enhance the environment.
Description and Operation: This low cost, compact and portable unit operates utilizing a minimal amount of compressed air. It comes with a magnetic stand to plug into position on any magnet accepting metal surface. Simply connect the snap-on collection attachments and clamp a 2 hose on the opposite side. Hook up your compressed air and you are set to go. Comes complete with shut-off valve and magnetic swivel base to position the unit any way you want. The air gap can be adjusted for a weak to strong vacuum.
This compact Air Cleaning, Dust and Fume Extraction unit is designed to handle small and spot area applications. Portable, low cost with zero maintenance!
View Complete Details

MGPM-20-50 Three Rod Guided Cylinder

The MGPM-HR is a compact body, end lock actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuators rod and seals. The end lock can be specified for either the head end (H) or rod end (R) of the stroke. The brake spring, end lock mechanism will engage when air pressure is lost for drop prevention applications and can be released by reintroducing air pressure or via a manual release bolt. The (M) carbon steel alloy slide bearing provides lateral stability protecting it from side load impacts, suitable for stopping applications.

Bore sizes: 20, 25, 32, 40, 50, 63, 80, 100 mm
Non-rotating accuracy ranges from +-0.04 (100 mm bore) to +- 0.07 (20 mm bore)
Rubber bumpers as standard
Auto-switch capable
View Complete Details

Rexroth Bearing

Excellent dynamic characteristics: Vmax 5 ms: Amax up to 500 ms2 to meet most application demands
Long term lubrication, up to several years for less maintenance
Unlimited interchangeability due to standardized guide rail for all runner block versions for reduced inventory
Comprehensive range of accessories for easy customization
Integral, all-round sealing for superior contamination protection
Multiple lubrication ports for auto lubrication design flexibility
Pre-lubricated for faster installation
View Complete Details

Automatic Tape Edge Machine

ALM-2000 Tape edge machine is advance technology tape edge machine, that able to provide the opportunity to fulfill the customers order within time, it has the capability to provide around 320 Mattress in 10 hour. it provides the product with Quality by minimum operator effort as compare to other models. With its advance Mechanism , Operator works easily up to 10 to 12 hours without feeling tired and less chance of mistakes due to operator tiredness.
View Complete Details

Ultrasonic Power Transudcers

High Efficiency: of high mechanical factor. High transfer efficiency is obtained when working in resonance frequency.

2.Big amplitude: designed and chosen by computer, high oscillation speed and big amplitude in front operculum.

3.Big Power: under the function of the prestressed force screw rod, the piezoelectricity ceramics can work freely in the highest level of power.

4.In good heat resistance: of small resonance impedance, less heat produced, can be used in a wide range of temperature with long life and

high reliability.
View Complete Details

Linear Bearing

The same rail profile may be used for every type of block (SBG, SBS, SPG and SPS). SBC uses only high strength and heat- treated special steels in all rails. Linear block SBG, SBS, SPG and SPS types are available. All blocks are dimension ally interchangeable. End seal New double lip structure which improves resistance to dust and particle contamination.
View Complete Details

Industrial Belt

Al mahir continuous improvements in materials, design and manufacturing methods make the classical cross section belt the workhorse of industry.

Bias cut, rubber impregnated fabric cover provides superior flexibility and friction resistance. Oil and heat resistant
Ultra high strength polyester cords assure fatigue resistance and length stability while providing the flexibility needed to attain long, trouble-free service
Specially compounded rubber body reduces heat build-up while giving firm support to the cords, maintaining uniform load distribution
Standards for oil and heat resistance and static conductivity
Origin country Germany
View Complete Details

Bench Machine

Draw bench is a machine used to do cold work on a metal, such as changing the shape of the metal without applying heat and applying only pressure.

It consists of a chain drive, driven by a motor and a set of gears. The other end of the machine consists of a die mounted on a thick steel plate. The work piece is inserted through the die and clamped on a trolley which then is hooked onto the chain for pulling across.

The die is usually made of tungsten carbide with a steel housing. The die can be made to any desired shape(round, square, rectangle, triangle, half round, L shape, oval etc.)

AL Mahir providing the parts, Service, Programming, Repairing, Fault tracing & troubleshootin
View Complete Details

Machines Belts

on FOAM & MATTRESS INDUSTRY, TAPE EDGE MACHINE, Wearhouse
Round Belts for the machines are available in stock.

V-Belt

Round belts (Rough , Smooth)

Conveyor Belts

are also available.
View Complete Details

Leak Detector

This device can be used to locate costly leaks in your compressed air system. Eliminating compressed air leaks can recover a tremendous amount of energy that can be used to operate all types of nozzles, amplifiers and vortex tubes with no added cost! Air savings means free energy. An Ultrasonic Leak Detector (UDC) is typically a hand-held device that is used to locate leaks by aiming it in the direction of a suspected source of an air leak. When a leak is present, then an audible tone can be heard via the use of appropriate head-phones. The proper head phone is very important as well as sensitivity in order to distinguish air leaks from other phenomena which can be miss-interpreted, and even made worse by potential false displays form and LED or other type of display.
View Complete Details

Variable Speed Drives

The Altivar Process drive ATV630 is an IP21 frequency inverter for wall mounting for 3-phase synchronous and asynchronous motors, specially designed for the following market segments: water & wastewater, oil & gas, mining, minerals & metals and food & beverage.
View Complete Details

Air Flow Meter

The X-STREAM FLOW METER represents a radical departure from conventional flow meter designs, providing easy installation, low cost, and accurate placement of the probes in the air stream. The meter clamps around a pipe with its probes projecting into the pipe through drilled holes. The low cost of the meter makes it ideal for installation at points throughout an air distribution system to track valuable compressed air and assess system operation.

The X-Stream Flow Meter clamps onto a pipe, with two flow sensing probes projecting into the pipe through 316- in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flow meter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment. The meter measures flow by maintaining one probe warmer than the other. It calculates the mass velocity from the amount of heat required, and then calculates the flow on the basis of pipe area. The flow rate, in SCFM, is shown on a large, four-digit display; a 4-20 mA output and a pulse output permit remote display, totalizing and data collection.Metric display is optional.
View Complete Details

Air Amplifiers

Air amplifiers are easy to mount and maintain reducing both compressed air consumption and noise levels. It takes energy from a small volume of compressed air to produce a high velocity, high volume, low pressure output air flow.
View Complete Details

Enclosure Coolers

Frigid-X Cabinet Enclosure (Panel) Coolers for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air.
Frigid-X Cabinet Enclosure (Panel) Coolers use a vortex tube that converts compressed air into cold air to cool NEMA 4, NEMA 4X and NEMA 12 electrical enclosures. They install on the panel through an electrical knockout. These air conditioners have no moving parts. Frigid-X Cabinet Enclosure (Panel) Coolers are a low cost, reliable way to cool and purge electronic control panels. Frigid-X Cabinet Enclosure (Panel) Coolers provide air conditioning for the electrical enclosures, eliminating electronic control downtime due to heat, dirt and moisture.
View Complete Details

Steel Roller Plunger

  • Types 1, 2, 13
Miniature enclosed pre wired switches for domestic and international standards

Plastic body non modular
Metal head and level arms
Positive opening 2-3-4 pole contacts
SPDT: NEMA B300standard snap-action contacts
SPDT: NEMA B300slow break before make contacts meet
IEC 947-5-1 for positive opening contacts
NEMA Types: 1, 2, 13
IEC Types: IP65
-13F to +158F (-25C to +70C)
View Complete Details

Limit Switch

  • Types 1, 4 (indoor), 12
XCKN 2139P20 Limit Switch Telemecanique Thermoplastic roller lever 50mm 1NC+1NO snap M20, 240VAC 10A

Compact Limit Switches
Compact switches for light-duty applications
IEC standard EN50047
Slim body has double insulated plastic non modular enclosure.
Metal head and level arms
SPDT: NEMA A300
Meets IEC 947-5-1 for positive opening contacts
NEMA Types: 1, 4 (indoor), 12
IEC Types: IP65
-13F to +158F (-25C to +70C)
View Complete Details

Cabinet Enclosure Coolers

Frigid-X Cabinet Enclosure (Panel) Coolers for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air.
Frigid-X Cabinet Enclosure (Panel) Coolers use a vortex tube that converts compressed air into cold air to cool NEMA 4, NEMA 4X and NEMA 12 electrical enclosures. They install on the panel through an electrical knockout. These air conditioners have no moving parts. Frigid-X Cabinet Enclosure (Panel) Coolers are a low cost, reliable way to cool and purge electronic control panels. Frigid-X Cabinet Enclosure (Panel) Coolers provide air conditioning for the electrical enclosures, eliminating electronic control downtime due to heat, dirt and moisture.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Syed Aamir (Almahir Factories Machinery Spatreparts Trding L.L.C)
  • UAE SHARJAH, UAE
  • Share us via