Post Buy Requirement
AM
United Arab Emirates
Add Review

Our Products

  1. Primer Paint 3 Products available
  2. Filters & Filtration Systems 9 Products available
  3. Sealants 3 Products available
  4. Others 39 Products available

Other Products / Services

ACRYLIC BASED MASTIC

Fire cracks in plaster, cement , concrete, timber and filling joints in roof tiles.

View Complete Details

COLD APPLIED RUBBERIZED BITUMEN MASTIC

COLD APPLIED RUBBERIZED BITUMEN MASTIC FOR LOW MOVEMENT JOINTS AND GAP FILLING


For sealing joints in roof tiles and screeds , roof flashing . For chase of waterproofing membranes and felts.

View Complete Details

WATER BASED BITUMEN PRIMER

OXIPRIME WB is an emulsified bitumen based primer designed for applications as a primer and sealer coat.

Uses:Used as primer coat prior to the application of torch applied bituminous waterproofing membranes and other waterproofing applications.


Advantages



  • Waterproof & Weather proof.

  • Anti corrosive

  • Can be applied in closed or confined spaces

  • Environment friendly

  • Non-flammable

View Complete Details

BITUMINOUS PROTECTIVE PRIMER

OXIPRIME SB-G is a blend of bitumen, solvents and adhesion promoter designed for application on concrete or cement-bond structures as a vapour and damp-proofing barrier. Oxiprime SB-G is a low viscosity liquid easily applied by brush, roller, or airless spray. It is particularly recommended for very rough uneven surface where the use of trowelling grade bitumen mastic would be difficult. Oxiprime SB-G can be applied on damp surface and equally effective as a concrete curing compound.

Uses :Used as vapor barrier and damp-proofing protective coat for below grade concrete structures as retaining walls, foundation walls, ramps, copings, footings, tie-beams, 2-cours floor slabs, vaults. Anticorrosion protection for metal surfaces.

Advantages



  • Economical damp-proofing and vapor barrier.

  • Ready to apply.

  • Resistant to alkalis, acids and organic matter in soils.

  • Concrete curing compound

  • Excellent adhesion to dry or damp surfaces


Chemical Resistances



  • Potable waters : Excellent

  • Sea Water : Excellent


Complies BS6949:1991 and ASTM C 309, BS 3416

View Complete Details

SBS MODIFIED RUBBERIZED BITUMEN EMULSION

OXICOAT RBE is a ready to use cold applied bitumen emulsion modified with SBS (Styrene Butadiene Rubber), to provide a tough durable and elastic coating. The cured film is weatherproof and resistant to aggressive ground salts.


Uses



  • Tanking and waterproofing concrete and brick foundation, retaining wall, bridge abutments, basements, columns, wet areas etc.

  • Damp proof membrane in sandwich construction, vapor seal.

  • Adhesive for bonding wooden flooring, insulation board, expanded polystyrene PVC and cork tiles, etc

  • Curing membrane cum protective coating for sub structures.


Advantages



  • Single component, non flammable and easy to apply tough impermeable film with good resistance to rupture during back filling.

  • Resist attack from chloride and sulphate ions, excellent resistance to extreme of temperature, avoiding risk of flow or embrittlement.

  • Sufficient elasticity to accommodate small movements and hairline cracks.

View Complete Details

2 K POLYURETHANE WATERPROOFING COATING

OXIPROOF PU 2K is two component polyurethane based, high solids, waterproof membrane coating to form a tough rubber membrane, once cured allows expansion and contraction over a broad temperature.


Uses


Use as a waterproofing membrane to most types of building facades, parking decks, roof decks, waterproofing on exterior walls or foundations.


It is recommended for waterproofing and damp proofing applications in basements, bathrooms, kitchens, swimming pools, refrigeration storage, roofs and other wet areas maintains flexibility and waterproofing
properties under exposure to water.


Advantages



  • Horizontal and Vertical applications

  • Excellent long term durability.

  • Used in coastal environment

  • High bond strength

  • Chemical cure, does not need the presence moisture

  • Corrosion resistant, mildew proof and frost resistant

  • Excellent build properties. Enable application to both horizontal and vertical

  • High tensile strength and elongation

  • High solid content


Standards Compliances
ASTM C 836-95

View Complete Details

CEMENTITIOUS POLYMER MODIFIED WATERPROOFING COATING

OXIPROOF CET is two component polymer modified cement based waterproofing coating, which can be easily mixed at the site using drill, fitted with paddle and can be applied using brush, roller or spray . The waterproofing coating cures to forms a breathable protective coating. OXIPROOF CET protects exposed reinforced concrete structures attack from acid gases and chloride ions.


Uses :Used in areas of coastal and marine environments and can be used in all types of structures, for existing and new concrete. It exhibits high wear resistance, weather resistance. The coating provides seamless resilient and flexible waterproofing which is suitable for reservoirs roofs and water tanks.


Advantages



  • Excellent wear resistance.

  • Excellent resistance against Tropical environment.

  • Suitable for waterproofing water retaining structures.

  • User friendly, non-toxic coating.

  • Ease application system reduces labour cost and save time.


Standard compliances:BS 6920 PART-1 Suitable for use in contact with potable water.

View Complete Details

ACRYLIC WATERPROOFING SYSTEM

OXIPROOF AR is a single component liquid applied, high resilient waterproofing system based on modified Acrylic Resin. It cures on exposure to atmosphere and forms an Elastomeric Seamless Membrane.


OXIPROOF AR is applied in a thixotropic consistency and may be used on vertical as well as horizontal surfaces. It will follow the contour of any irregular surfaces maintaining uniform thickness. The superior flexibility and elongation properties of OXIPROOF AR allow expansion and contraction of the substrate without cracking or becoming brittle.
Service temperature is from -29oC to +90oC.


Uses



  • OXIPROOF AR is a single component compound and ready to use from the container without mixing.

  • No catalysts are necessary to cure the system because self cures when exposed.

  • Cold applied by spray, brush, roller or squeegee.

  • Odour less coating system.

  • Provides a seamless waterproofing.

  • Non-flammable, non-toxic and environment friendly.

  • Available in White and Grey colour.

  • OXIPROOF AR reduces the cost of application by eliminating mixing, splicing sealing tapes, adhesives other labour consuming methods required when installing other conventional types of waterproofing system.


Advantages



  • Roof deck and walls, mortars, wood and metal.

  • Over the asbestos roofs.

  • Over terrazzo tiles

  • Can be applied over spray applied polyurethane foam and other materials that are ultra

  • violet degradable.

  • Under tiled areas like bathroom, toilets and kitchens.


View Complete Details

ANTI-CORROSIVE PIPE WRAPPING TAPE

Oxiwrap PVC is a high performance anti-corrosive pipe wrapping tape designed for use on buried pipeline, pipe joints, fittings and tie bards where impact or stress is high.


Advantages



  • Ease to apply

  • Excellent adhesion

  • High Strength

  • Flexibility

  • Resistance to Acid & Alkali

  • Excellent impact resistance

View Complete Details

Bituminous Protection Board

Waterproofing and protection of substructures below ground

View Complete Details

APP MODIFIED BITUMINOUS WATERPROOFING MEMBRANE

OXIPLUS APP bitumen water proofing membrane is manufactured from a rich mixture of bitumen and selected polymers (Atactic Poly Propylene and other proprietary polymers) blended together to obtain excellent heat resistance, UV resistance and water proofing properties polymerized bitumen then coated onto dimensionally stable reinforcement core of non woven spun bond polyester fabric to obtain excellent tensile & tear strengths and has high fatigue and puncture resistance.
OXIPLUS APP is available in Mineral/ Slated Version for exposed conditions and sanded version also.


Uses


OXIPLUS APP is used as water proofing / damp proofing membrane for protection of various substrates in wide range of application.



  • Inverted Roofs

  • Terraces & Balconies

  • Sunken slabs

  • Patios

  • Concrete Foundations & Footings

  • Basements

  • Pile Heads

  • Swimming Pools & Water retaining structures

  • Bridges & Tunnels

  • Airport aprons & ramp areas


Advantages



  • High resistance to positive water & vapor pressure.

  • Good dimensional Stability Under tension

  • Good flexibility

  • Can accommodate structural movements

  • High Puncture and fatigue resistance

  • High tensile and tear strengths

  • Resists water borne chemicals

  • Accommodates structural movements.

View Complete Details

FOAMING AGENT FOR LIGHT WEIGHT CONCRETE

Oxifoam is synthetic anionic surfactants based air entraining agent used in concrete or mortar mixes. The product is recommended for use whenever air entrained concrete is desired. Aerated concrete produced by the usage of oxifoam will be used for insulating roofings, light weight in-fills, non-structural in-fills for bridge decking applications. This product can be used in all concrete or mortar mixes and can able to produce a dry weight aerated concrete within the range of 300 kg/m3 to 1400 kg/m3.


Advantages



  • Compatible with natural and synthetic light weight aggregates

  • Prevent concrete damage caused by repetitive Freeze-thaw cycles.

  • Improved workability and reduced bleeding.
    Compatible with Portland cement including SRC and other cement replacement materials.

View Complete Details

ALUMINIUM FLASHING SELF ADHESIVE TAPES

OXITAPE FLASHING a black bituminous compound covered by a reinforce aluminium film. It is a versatile self-adhesive tape for instant flashing applications. It is ready to apply, weatherproof, with outstanding durability and is economical.


FEATURES AND BENEFITS:



  • Asphalt, brickwork, concrete, fiber cement sheet, metal and plastic materials, roofs and covering etc.

  • Sealing & Waterproofing :Glass & plastic windows frames, parapets, skylight structures etc.

  • Repair Work :Metal and fiber cement sheet roofing, shingles, gutters and metal tube etc.

  • Highly flexible

  • Anti-corrosion properties

  • Bridges minor cracks

  • Seamless and adaptable to irregular surface.

  • Compatible with other bituminous products

  • Excellent bonding and adhesion properties

  • Cold applied; easy application

View Complete Details

POLYTHENE JOINT/ COMPRESSIBLE FILLER

OXICELL PE is non-extruding, non-absorbent, UV resistant, semi-rigid, highly resilient, bitumen free, cross linked closed cell polyethylene joint filler for expansion joints in concrete, brickwork and block work. It is ideal for cushion packaging and is used in many applications, including computer, automotive, construction and recreation.


Uses:Expansion joints in all types of concrete works, Base slabs, Deck slabs, Subway structures, water retaining structures, culverts, bridge work masonry, potable water tanks etc. It is ideally suited as a component material in products requiring a shock absorbing, vibration dampening, insulating and/or buoyancy component, and as a material for dunnage and cushioning components in packaging applications


Advantages



  • Non-absorbent and non-tainting. Hence makes it suitable for use in both water excluding and water retaining structures.

  • Cross linked closed cell, UV resistant and semi-rigid.

  • Chemically resistant petroleum solvents, acids, alkalis and oil.

  • Highly resilient the heat welded laminated structure combines greater rigidity and load support, therefore low load transfer.

  • Bitumen-free and rot-proof. Ideal for structures

  • Designed to store potable water.


Specification compliance



  • Pertinent clauses of BS 4443.

  • BS 5628 Part 3 Use of Masonry Para 20, 4.

  • DoT Specification of High way Works, 1986 Part 3 Clause 1015 (Bridges).

  • Pertinent clauses of ASTM D 1751, ASTM D 1752, ASTM D 545, ASTM D3575

  • Drinking Water Test Passed

  • BS 6920: 2000 as per WRAS, UK WRAS Approval Number: 1201545

View Complete Details

NEOPRENE BASED COMPRESSIBLE JOINT FILLER

OXICELL NEO (Closed Cell Neoprene) is highly resilient and flexible black closed cell neoprene expansion joint filler.It is resistant to oils and most solvents and has excellent weathering and ozone characteristics. Also available with Pressure Sensitive Adhesive.


Uses :Neo Closed Cell Neoprene is ideal for use as an expansion joint in highways, bridge approaches, industrial and warehouse flooring, sidewalks, and curbs, and in all concrete or block structures.


Advantages



  • Oxicell Neo Closed Cell Neoprene Expansion Joint Filler should be installed against the forms or other adjacent abutting structures, as detailed on the plans, before placing concrete.

  • It can be easily cut to size on the job with a utility knife. On site cutting enables the contractor to always have on hand the exact size required, eliminating overbuying of various sizes.

View Complete Details

BITUMEN IMPREGNATED JOINT FILLER/ PROTECTION BOARD

OXIBOARD FLEXILE SHEET is compressible bitumen impregnated soft board expansion joint filler. The impregnated soft board is made from wood chips and wood waste, mechanically reduced to fibers which are then pressed to form a continuous sheet which is then cut to size. Bitumen is incorporated into the board during manufacture to improve its moisture resistance, damp resistance and durability.


Uses :
Ideal to form movement joints in insitu concrete, construction joints in precast concrete construction. Structural expansion joints in concrete slabs, basements, retaining walls and other concrete wall construction. Protection of waterproofing membrane from mechanical abuse and against backfill.
Concrete pavements and floors
Roads, ramps and runways
Pedestrian areas
Concrete retaining walls and bridges
Concrete basement structures


Advantages



  • Resilient

  • Will not extrude under compression

  • High recovery

  • Low distortion

  • Easy to handle, cut and tamp

View Complete Details

SINGLE COMPONENT ACRYLIC CO-POLYMER MASTIC SEALER

Polysulphide sealants are usually formulated as one- or two-component products which are based on sulfur-containing liquid polymers.
Because of their excellent resistance to fuel and chemicals, Polysulphide Sealants are widely used for any kind of construction and expansion
joints on usual construction sites, for airport construction, various aerospace applications, sewage plants and areas where high chemical
properties and UV resistance are required.


For sealing movements joints in concrete paving & hard standing areas, car parks, chemical industries, Workshops & Warehouses.

View Complete Details

HIGH BUILD SOLVENT FREE EPOXY FLOORING SYSTEM

HIGH BUILD SOLVENT FREE EPOXY FLOORING SYSTEM FOR TRAFFIC DECK PROTECTION


Solvent-free, epoxy resin self smoothening chemical resistant flooring system. It has excellent adhesion qualities, chemical resistant and glossy finish and easily cleaned.



View Complete Details

COAL TAR BASED EPOXY PROTECTIVE COATING

334 - 584.50 /Ltr Get Latest Price
  • Color Black
  • Grade Standard Industrial Grade
  • Brand Name OXICHEMICALS
  • Material Polymer
  • Certification ISO 9001:2008
  • Surface Finishing Coating
  • Shelf Life 2Year
  • Purity 99%
  • Texture Soft
  • Form Liquid
  • Pattern Plain
  • Waterproof Yes
  • Packaging Type Steel drums
  • Packaging Size 25-50Kg
  • Speciality Chemical Resistant, Waterproof, Solvent Resistant
  • Dry Film Thickness Range 1.5-2mm
  • Usage Industrial Use

coal tar based epoxy protective coating for steel and concrete


solvent-free, epoxy resin self smoothening chemicalresistant flooring system. it has excellent adhesion qualities, chemical resistant and glossy finish and easily cleaned.



oxiprotect cte 66

View Complete Details

ASTM C-881 Liquid Components

THE LIQUID COMPONENT COMPLY WITH ASTM C-881. TYPE III, GRADE 1 CLASS B&C.



Impact and resilient properties and ideal for floor repairs , resurfacing or whenever permanent repairs to cracked / spelled concrete are needed. The liquid components comply with ASTM C-881. Type III, Grade 1 Class B&C.

View Complete Details

AQUA BASED EPOXY SYSTEM

AQUA BASED EPOXY SYSTEM-VOC IN LOW



General Flooring appplications


View Complete Details

PVC Waterstops

OXISTOP PVC Water stops are manufactured from a high quality virgin PVC compound which has been formulated to give excellent flexibility and durability to offer long life performance in concrete structures against water leakages.


FEATURES AND BENEFITS:



  • Proven design with multiple ribs.

  • 4 diamond bulbs act in compression and extrusion.

  • Deep rib tortuous path provides better bond to concrete and water tightness.

  • Wide expansion bulb enables joint fillers to be fully supported.

  • Flexible to accommodate movement.

  • Reinforced eyelet edge flanges for positive fixing.

  • Simple job site splicing

  • Full range of intersection pieces.

  • Suitable for use in potable water structures and has no effect on the quality of potable water.


USES:



  • Reservoirs, Water towers and sewage tanks.

  • Swimming pools

  • Dams, Culverts, Canals and spillways

  • Bundled areas surrounding liquid retaining tanks

  • Basements and underground car parks

  • Tunnels and subways.

  • Abutments and retaining walls.

  • Roof decks and podium areas

View Complete Details

Hydrophilic Rubber Water Stop

OXISTOP HP HYDROPHILIC is made of high performance modified rubber strips. The swelling action is the result of the interaction between water and hydrophilic groups which are part of the HYDROPHILIC molecular structure. Expansion of the water stop creates a positive seal against the face of the concrete joint and prevents the water entry into the structure through the protected joint.


FEATURES AND BENEFITS:



  • Active protection OXISTOP HP hydrophilic water stop swell in contact with water to form an effective compression joint.

  • Simple application and jointing techniques.

  • Slow expansion rate to prevent damage to freshly placed concrete during curing.

  • Retains original shape after repeated swelling and contraction.

  • Swelling properties are unaffected by long term wet / dry cycling. Made of synthetic rubber Does not degrade during repeated wet / dry cycling.

  • Sustains effective seal in wet conditions.


USES:



  • OXISTOP HP Hydrophilic water stop can be applied against existing concrete and are simply installed by nailing or using a hydrophilic adhesive. In contact with water, hydrophilic strips react and swell by up to 300% of their original dimensions to form a compression seal.

  • Hydrophilic strips are suitable for installation in low movement construction joints.

  • OXISTOP HP HYDROPHILIC is used primarily for foundation wall slabs, slabs-on-grade, precast wall panels, manholes, pipe connections, box culverts, utility and wet wells, and potable water tanks.

View Complete Details

CEMENTITIOUS WATER PLUG

Cement based to stop immediate leakage of water in water tanks and other concrete surfaces.

View Complete Details

Oxyguard 600

We are offering oxyguard 600.sbs based liquid applied bitumen membrane
wet areas, bath room & kitchen 900% elongation guaranteed.
View Complete Details

Polyethylene Joint Fillers , Compressible Filler Board

We are offering Polyethylene Joint Fillers Board
PE Joint Fillers board
Compressible filler boards
Expansion joint filler
View Complete Details

Oxiproof Ar - Acrylic Based Water Proofing Products

We are offering oxiproof ar - acrylic based water proofing products.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Jahir Husain (Al Majara Polychem Ind. Llc)
  • P.O.BOX 66507 | Sharjah UAE
  • Share us via