ANBI GENERAL TRADING LLC

dubai, United Arab Emirates

AerofoamNBR Rubber Insulation Rolls and Sheetsare closed cell elastomeric foam structures with a non-porous composition that offers high thermal efficiency and protection from imminent condensation problems, and helps as sound absorber. Depending on the requirements of the market, this product can be coated with different types of foils and have a factory-applied self-adhesive backing. The installation time is reduced more than 40% due to the ease in cutting as well as quick adhesion of the material.

AerofoamNBR Rolls and Sheets come in handy where Aerofoam(NBR) Nitrile Tubes cannot be used on pipes with big diameter. Other applications include ventilation ducts, tanks, and reservoirs, engine rooms assound and thermal protection. Not only are they environmentally friendly, they pose no harm to human health, it has zero Ozone Depletion Potential (ODP), Global Warming Potential (GWP) of less than five, and a low Volatile Organic Compound (VOC) of less than 6 g/m2/hr in 24 hours. Aerofoam NBR Rolls and Sheets comply with LEED requirements.

• Big diameter pipes (where tubes cant be used)
• Ventilation ducts
• Tanks, reservoirs
• Engine rooms (as sound attenuates)
• Fittings (valves, flanges, bends)

• Fire rated CLASS O as per BS 476 Parts 6 & 7;
• Very low water vapor permeance (0 perms);
• High water vapor diffusion factor (> 17, 000);
• Very low water absorption rate (0.06% by volume);
• High thermal efficiency (24 C= 0.033 W/mK; 46 C= 0.035 W/mK);
• Wide temperature range (from -50 C to +105 C);
• Chemical resistance resistant to most chemicals (sodium, silica, fluoride, chloride, etc.);
• Antibacterial & antifungal;
• Environmental friendly ODP = 0 and GWP < 5;
• Very low VOC emission level ( < 6 g/m2/hr in 24 hours);
• Sound absorption properties;
• Easy and fast to install.

AerofoamNBR Rubber Insulation Rolls and Sheetsare closed cell elastomeric foam structures with a non-porous composition that offers high thermal efficiency and protection from imminent condensation problems, and helps as sound absorber. Depending on the requirements of the market, this product can be coated with different types of foils and have a factory-applied self-adhesive backing. The installation time is reduced more than 40% due to the ease in cutting as well as quick adhesion of the material.

AerofoamNBR Rolls and Sheets come in handy where Aerofoam(NBR) Nitrile Tubes cannot be used on pipes with big diameter. Other applications include ventilation ducts, tanks, and reservoirs, engine rooms assound and thermal protection. Not only are they environmentally friendly, they pose no harm to human health, it has zero Ozone Depletion Potential (ODP), Global Warming Potential (GWP) of less than five, and a low Volatile Organic Compound (VOC) of less than 6 g/m2/hr in 24 hours. Aerofoam NBR Rolls and Sheets comply with LEED requirements.

• Big diameter pipes (where tubes cant be used)
• Ventilation ducts
• Tanks, reservoirs
• Engine rooms (as sound attenuates)
• Fittings (valves, flanges, bends)

• Fire rated CLASS O as per BS 476 Parts 6 & 7;
• Very low water vapor permeance (0 perms);
• High water vapor diffusion factor (> 17, 000);
• Very low water absorption rate (0.06% by volume);
• High thermal efficiency (24 C= 0.033 W/mK; 46 C= 0.035 W/mK);
• Wide temperature range (from -50 C to +105 C);
• Chemical resistance resistant to most chemicals (sodium, silica, fluoride, chloride, etc.);
• Antibacterial & antifungal;
• Environmental friendly ODP = 0 and GWP < 5;
• Very low VOC emission level ( < 6 g/m2/hr in 24 hours);
• Sound absorption properties;
• Easy and fast to install.

• Semi-rigid and rigid slabs manufactured from stable glass fibres bonded with thermo-setting resins, and free from coarse fibres and shot. Easy to handle and cut to fit rectangular ducts and air handling equipment.

• External insulation of rectangular and circular air ducting and air handling equipment.KIMMCO Duct Insul (KDI) is in the form of flexible rolls.

• KIMMCO Duct Insul is available un-faced or with a glass reinforced aluminium foil/Kraft laminate facing (FSK) which combines a pleasing appearance with excellent vapour resistance.

• WORKING TEMPERATURE: Fibre 230 C; Foil Face 100 C.
• PERMANENCE: KIMMCO Duct Insul has a high resistance to accident damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot proof, odourless, non-hygroscopic and will not sustain vermin or fungus.
• COMBUSTIBILITY: Base fibers are non combustible when tested in accordance with BS 476 (part 4), ASTM El 36.