Ajman, United Arab Emirates
Our Products
flexible intermediate bulk containers (fibc) are widely used for storage, transportation and handling of powder, flake or granular materials. Typically they are constructed from woven polypropylene (pp) fabric in the form of cubic bags. The fabric used may be a single layer, with extra loose liner, or laminated. The uv treated pp is a good electrical insulator.
fibcs, also called big bags, bulk bags or jumbo bags, fibcs have a very low packaging weight and are safe to use and available in various different forms. In 90 percent of cases, we custom make the fibc for our customers. In doing so, we take into account the filling and discharging conditions, the hydroscopic properties and the density of the product being packaged.
different types of jumbo bags made by us.
When products are loaded or unloaded, an electric charge is created. If this happened in an explosive environment/atmosphere, it could represent a danger to life. That is why it is crucial that we take all possible measures to prevent this discharge. We offer FIBCs (big bags/jumbo bags) that are specially designed for anti-static applications and if these bags are used correctly and that the regulations are complied with, we can guarantee you a safe workplace. The anti-static classifications of our FIBCs are described below.
Type A:Type A FIBCs are made of a fabric that does not have any protective properties against the build-up of static electricity. You can use this type of FIBC for non-combustible materials in an environment where no flammable gases are present.
Type B:Type B FIBCs, like type A, have no protective properties against the build-up of static electricity. The difference is that the fabric material has a lower breakdown voltage (< 6 kV). You can use this type of FIBC for dry, combustible materials, but there must not be any flammable gasses in the area.
Type C:Type C FIBCs are made of a conductive fabric. The conductivity is obtained by interweaving several conductive yarns. The various threads of yarn are connected to each other and come together at an earthing point. You must therefore earth this FIBC at all times. You can use this type of FIBC for combustible materials and in environments where flammable gases are present.
Type D:Type D FIBCs are made of a special anti-static fabric with permanent discharge properties (corona discharge). They do not need to be earthed. However, it is crucial that the immediate vicinity (machinery, staff, etc.) is fully earthed. There are also restrictions on the relative humidity in order to safely use this type.
SPECIFICATIONS:Animal feed, Chemicals, Food Ingredients, Mining and minerals, Pharmaceuticals, Waste & recycling, Wheat & Grain, Tobacco.
The transport of dangerous goods is regulated in order to prevent injury to people, harm to the environment and material damages.
UN FIBCs according to international regulations for transport by sea, rail and road. Our technicians are well trained in the procedures and regulations regarding transportation of dangerous goods. UN FIBCs are tested with Safe Working Loads (SWL) ranging from 500 kg to 2000 kg.
UN CODE FOR TYPE OF FIBC| 13 | Flexible IBC for solids, filled or discharged by gravity (liquids and solids under pressure [>0.1 bar] are not permitted) |
| H | Woven PP fabric without coating or inner liner |
| H2 | Woven PP fabric, coated |
| H3 | Woven PP fabric with inner liner |
| H4 | Woven PP fabric, coated and with inner liner |
| Y | Flexible IBC approved for packaging groups II and III |
| Z | Flexible IBC approved for packaging groups III |
| IMDG Code | Chapter 6.5 | Transport by sea |
| ADR | Annex A 6 | Transport by road |
| RID | Annex A VI | Transport by rail |
We are offering our clients a quality range ofSling bag.These industrial sling bags are manufactured using high-grade material and are in line with international quality standards. Known for high load bearing strength, these industrial sling bags are considered as one of the best packaging solutions and enable transportation of heavy sacks. Moreover, our range of Sling Bags (FIBC) provides protection against adverse conditions during transit and decreases the overall cost of transportation of goods.
Bags are manufactured with superior quality Biaxially Oriented Polypropylene (BOPP) films. These bags have high tensile strength and impeccable physical properties like good dimensional stability, water proofing, transparency etc. These bags are available at highly competitive prices and customization is done as per the requirement of the client.
PRODUCT VARIANTS UNDER FIBCS
Vapor Corrosion Inhibitor VCI Paper provides anti-corrosion protection for increased life of your tools, metal components, machined parts and any item that is prone to oxidation.
Protection :protects metals for up to 5 years when properly packed and stored.
Shelf Life :2 years if stored at 85 degrees F (30 degrees C) or less and out of direct sunlight in original packaging.
TYPES
A tarpaulin or tarp, is a large sheet of strong, flexible, water-resistant or waterproof material, often cloth such as canvas or polyester coated with urethane, or made of plastics such as polyethylene.
PE Tarpaulins are made of High Quality PE Fabric. Water proof, stabilized against ultraviolet rays & excess heat for long outdoor exposure.
Laminated Woven cloth of polyethylene & P.V.C. coated woven fabric of Nylon.
SPECIFICATIONS
We are engaged in offering quality Vermi Beds to our honored customers. These vermi beds are highly durable, heat resistant and non-corrosive. We also make customized vermi beds as per specification and requirements given by customers. Available at most competitive price in the market, these vermined are being used in India and exported worldwide.
MAKKA PLASTIC Suppliying Plastic Polyethylene Sheet in Dubai, UAE which is mostly used for constructions slab, for flooring protection for shipment covering, pallet top covering etc. currenty we are supplying our Polyethylene Sheet to all emirates & GCC countries, Abu Dhabi, Dubai, Sharjah, Ajman, Fujairah, Ras Al khaimah.
THE USE OF POLYTHENE SHEET IN CONSTRUCTION PROJECTSPolythene or polyethylene sheet is commonly used as a damp-proof membrane with oversite concrete for all but severe conditions of dampness. It is recommended that the sheet should be at least 1000 gauge. The sheet is generally supplied in rolls 4 m wide by 25 m long with a weight of 1 kilo/metre. But, we will take custom orders and can manufacture polythene as per customer length, width and weight. When used under concrete oversite the sheet should be laid on a blinding layer of sand or compacted fuel ash spread over the hardcore. The sheets are spread over the blinding and lapped 150 mm at joints and continued across surrounding walls, under the dpc for the thickness of the wall. Where site conditions are reasonably dry and clean, the overlap joints between the sheets are sealed with mastic or mastic tape between the overlapping sheets and the joint completed with a polythene jointing tape.
Moreover, we offer the best and most competitive distribution of various range of Plastic and Packaging products to meet the requirements of our clients.
We ensure supply of excellent products of high quality at a very competitive price, prompt delivery and flexible services through our uncompromising commitment.
