Post Your Requirement Menu

Welcome User

Other Products / Services

We offer the best product range of Scan Keyless Access Control Solution, Reader Modules, Access Portal cluster controller, access control tags and S-Series Access Portal controller.

Scan Keyless Access Control Solution

Impro Uniscan and Flexiscan Range Cost Effective Keyless Access Control Solution - The system is completely configured on the Controller. No need for a PC or software. Features: • Supports 99 Tag holders  • Up to 150m from Controller to Reader  • Simple to configure using buttons on the controller  • Support configuration lock using button pattern code  • Support 125 kHz Passive Tags or Pin-code & 4 button RF Transmitter  • Each Relay can be set to Toggled or Pulse mode  • Hardware uses Impro’s proprietary S-bus protocol which comes standard with AES 128 bit encryption with key exchange  UniScan  • Offers 1 door control through the single relay on the Controller  • Supports a single RF or Proximity reader  • System is supplied as a kit with the UniScan Controller + the selected reader  FlexiScan  • Offers up to 4 door control using either the relays located on the Controller or using remote relay units  • Supports up to 8 RF and/or Proximity readers to control the 4 doors  • The system is supplied as individual units

View Complete Details

Reader Modules

Access Portal reader modules simply clip into the cluster controller for one of the most rapid installation procedures ever seen.  With just one click, your power and communication cabling is done.  Alternatively, the reader module can be installed up to 150m* from the cluster controller. Mix and match Up to eight modules, of any variant, can be installed with a single cluster controller. This provides a huge amount of flexibility to meet different installation needs, with off-the-shelf hardware, as well as significant cost savings. Features of the modules: Hot swappable Up to eight modules per cluster controller LED diagnostic indicators Onsite firmware upgrades End-of-line sensing Variants Wiegand: most common communication method for access control devices. Enables the use of third party products such as biometrics, ANPR and long-range readers. Two readers per module. Antenna: the older 125KHz communication protocol, ideal for cost sensitive markets not requiring high functionality. Two readers per module. S-Series: highly cost-effective solution with anti-cloning protection and secure proprietary encryption, using three-core cabling. Four readers per module. IO8: comprises eight digital inputs and eight relay outputs, for multiple connect/disconnect options such as elevators, intrusion systems and lighting control. Portal READERS - WIEGAND & ANTENNA Impro offers a diverse array of access control readers, to meet a variety of installation requirements. We offer interior and exterior readers, one of the smallest reader footprints, to traditional junction box mountings. Most readers are available as multi-discipline versions, ensuring that legacy 125kHz proximity tags and the new 13.56MHz ranges are able to be read. You can also choose between fingerprint biometric readers, keypads and non-keypad variants. •  Multi-discipline readers (MDR/MDK) •  Multi-discipline junction box readers (MJR/MJK) •  Wiegand metal harsh environment readers •  Antenna readers •  LCD biometric time & attendance readers (MDTA/BMTA) •  Multi-discipline tag retention readers (DBv) •  Mobile Portal Handheld Reader •  UHF  Receiver

View Complete Details

Access Portal cluster controller

The Access Portal cluster controller offers unrivalled simplicity and cost-effectiveness.  True plug-and-play modular hardware means you simply plug units together and all the power and communication cabling is done for you, with just one click.  Need to expand your installation? Simply plug more units together – it’s that quick. The power of cluster   The ability to plug a number of reader modules into one Access Portal controller is termed ‘clustering’.  This is a highly cost-effective solution as one cluster controller can manage up to eight reader modules and 16 readers – no longer are you constrained to one controller per door.   However, not everyone may want to cluster, so a controller can also be installed in one location and the reader module up to 150 metres away (that’s the length of one and a half football fields).   A world of choice   The cluster controller is available with a touchscreen LCD, which is specifically designed for smaller installations to operate as a stand-alone system (no computer necessary); or without the LCD for sites using a computer or server.   The controller is also available in either a plastic housing, or in a secure metal enclosure for additional security.   Controller features include:   Full offline functionality Ability to store up to 100, 000 transactions Built-in anti-tamper switch Optional touchscreen LCD Compatible with all Access Portal modules Compatible with all Access Portal software The Access Portal cluster controller offers unrivalled simplicity and cost-effectiveness.  True plug-and-play modular hardware means you simply plug units together and all the power and communication cabling is done for you, with just one click.  Need to expand your installation? Simply plug more units together – it’s that quick. The power of cluster The ability to plug a number of reader modules into one Access Portal controller is termed ‘clustering’.  This is a highly cost-effective solution as one cluster controller can manage up to eight reader modules and 16 readers – no longer are you constrained to one controller per door. However, not everyone may want to cluster, so a controller can also be installed in one location and the reader module up to 150 metres away (that’s the length of one and a half football fields). A world of choice The cluster controller is available with a touchscreen LCD, which is specifically designed for smaller installations to operate as a stand-alone system (no computer necessary); or without the LCD for sites using a computer or server. The controller is also available in either a plastic housing, or in a secure metal enclosure for additional security. Controller features include: Full offline functionality Ability to store up to 100, 000 transactions Built-in anti-tamper switch Optional touchscreen LCD Compatible with all Access Portal modules Compatible with all Access Portal software The Access Portal cluster controller offers unrivalled simplicity and cost-effectiveness.  True plug-and-play modular hardware means you simply plug units together and all the power and communication cabling is done for you, with just one click.  Need to expand your installation? Simply plug more units together – it’s that quick. The power of cluster The ability to plug a number of reader modules into one Access Portal controller is termed ‘clustering’.  This is a highly cost-effective solution as one cluster controller can manage up to eight reader modules and 16 readers – no longer are you constrained to one controller per door. However, not everyone may want to cluster, so a controller can also be installed in one location and the reader module up to 150 metres away (that’s the length of one and a half football fields). A world of choice The cluster controller is available with a touchscreen LCD, which is specifically designed for smaller installations to operate as a stand-alone system (no computer necessary); or without the LCD for sites using a computer or server. The controller is also available in either a plastic housing, or in a secure metal enclosure for additional security. Controller features include: Full offline functionality Ability to store up to 100, 000 transactions Built-in anti-tamper switch Optional touchscreen LCD Compatible with all Access Portal modules Compatible with all Access Portal software

View Complete Details

access control tags

We offer a variety of access control tags to meet your specific requirements. Our tags include both 13.56MHz Mifare tags and legacy 125kHz tags, as well as units that operate on dual frequency of both Mifare and Omega (125kHz). We also have the anti-cloning S-Series credit card tag, which incorporates a proprietary encryption for additional security, as well as SEOS cards. A range of styles is also available, from the ever popular credit card tag, to rectangular key rings, round button tags and slim long range tags. We also offer a four button transmitter tag, for those wanting to drive relays, such as for a gate.

View Complete Details

S-Series Access Portal controller

  The Access Portal S-SERIES comprises cost-effective hardware that seamlessly operates on Impro Technologies’ Access Portal management software, to provide a holistic access control system. A key feature of the S-Series is the ability to operate up to eight SIR readers or four APB doors from a single module. The clustering concept also ensures zero downtime, as modules are plug and-play – simply unplug and replace. Expansion of a system is just as easy, whereby additional controllers and modules are quickly and effortlessly added as needed. The system caters for redundancy as transactions reside in the controller, as well as the server. Should a connection to the server be lost, or compromised, there is no catastrophic failure or security breach, as the controller continues to interdependently operate and, once back online, seamlessly uploads transactions to the server. Installation time and cost is improved through the use of three-core cable, and the system supports a variety of installation topologies such as star, tree, daisy-chain and multi-drop for unrivalled flexibility. Another installation benefit is the ability for the reader to be installed up to 150m from the module. The S-Series uses 125kHz RFID secure technology that protects against tag cloning to prevent unauthorised users from accessing the premises, as well as encrypted communication between the controller and module for added security. The solution is ideal for small to large installations, due to the option of a touchscreen LCD controller with embedded software which doesn’t require a PC, or server-based system. The S-Series operates seamlessly with the full range of Access Portal software. Features: • Cost effective: one of the most price competitive systems • Secure: uses trusted anti-cloning tag technology • Scalable: simple plug-and-play for seamless expansion • Flexible: increased cable distance and ability to multi-drop WHO SHOULD USE THE S-SERIES? All installations, big or small, looking for: • Improved security • Reduced costs • Low-maintenance • Controlled access • Remote management • Reliability and convenience PRODUCT BENEFITS: • Up to eight SIR readers or four APB doors per module • Reduced cabling and installation costs • Enhanced security with anti-cloning tags • Available in plastic housing or metal enclosure

View Complete Details

Card Printer, card printing solution

The ideal card printing solution for small businesses, schools, and local governments, the HID® FARGO® DTC1250e ID card printer and encoder is the fastest printer in its class, allowing you to produce 50% more visually-rich, full-color credentials in the same amount of time. Its small, compact footprint makes it easy to use in a variety of office environments and can be easily upgraded to include an embedded iCLASS SE® encoder (part of the iCLASS SE platform), enabling you to produce secure, personalized membership and loyalty photo ID cards in one single, seamless step. An optional Wi-Fi® accessory is also available to help you print anytime, anywhere. Using the included Swift ID® badging software, you can design custom ID cards on the spot, and the FARGO Workbench™ diagnostic utility software can help you easily maintain your card printer over time. The DTC1250e ID direct-to-card printer and encoder also features an intuitive, user-focused SmartScreen™ graphical display, enabling efficient set-up, operation and maintenance of your technology investment. Backed by a global three-year warranty, each of our seventh generation HID FARGO card printers can be seamlessly integrated to work with other HID products, ensuring that you receive and retain the maximum value from the most trusted name in secure identity solutions.

View Complete Details

MorphoAccess SIGMA Lite

Engineered with the same attention to detail and performance as all SIGMA Family readers, the MorphoAccess SIGMA Lite terminals are specifically designed to equip narrow mounting surfaces, such as glass/aluminum door mullions, turnstiles, or server rack doors. With two designs and multiple card reader options, there are a variety of models to address the widest range of deployment scenarios, both indoors and outdoors. World's #1 fingerprint technology inside: 1:10, 000 user identification in 1 second High capacity: 30, 000 templates, 250, 000 IDs in authorized user list, 1 Million logs Anti-fraud features: fake finger detection, duress finger, timed anti-pass back Flexibility: Prox®, iClass® or MIFARE®/DESFire®/NFC contactless card reader as an option Embedded web server Tough design: IP65 rated and vandal resistant (IK08) Compatible with Morpho and Bioscrypt existing installations

View Complete Details

ID Card Printer And Encoder

Built on 20 years of proven direct-to-card printing expertise, the HID® FARGO® DTC1500 card printer and encoder offers the convenience and lower cost of high-capacity consumables along with a comprehensive feature set – enabling organizations to routinely issue highly secure cards and IDs at a fraction of the cost without sacrificing quality. Designed for government ID projects, universities and colleges, K-12 schools, healthcare facilities, and small-to-medium businesses, the DTC1500 boasts of distinctive security features ideal for these organizations. Innovative, built-in security features – Easy-to-implement security features such as resin scramble data protection and custom overlay watermark come standard on every unit. Low-cost, high-capacity consumables – High-capacity, full and half-panel color ribbons significantly lower cost-per-card and reduce total cost of ownership. Highly versatile – Powerful printing in a modular, scalable design that simplifies in-field equipment upgrades and migration to higher levels of security. Earth friendly – GreenCircle® Certified for efficient energy consumption and eco-friendly (ECO) refill ribbons. Security, lower cost, innovation, and versatility – it all comes standard with the DTC1500.

View Complete Details

Nitgen ENROLLMENT DEVICE

FINGKEY Hamster II has a fingerprint sensing function and is a cutting-edge fingerprint sensor that prevents use of fake fingerprints. It can be connected to PC along with a nomal mouse and used for all the areas involving passwords and will be a competent security gadget without having to use a password, which is often hard to remember and misused by unauthorized persons.  USB Connection    - USB 2.0 compatible interface, plug and play device    - Supports multiple devices handling  Superior Matching Engine    - 1st in FVC(Fingerprint Verification Competition)    - Auto-on™ Function   Advanced Optical Technology    - Sensor resistant to scratches, impact, vibration and electrostatic shock  International Standard Image Format and Interfaces    - WSQ compression    - ISO 19794-2/4, ANSI 378, NFIQ  High Quality Image Capturing  Strong Performance for Wet / Dry Finger

View Complete Details

Resettable Call Points

DOUBLE POLE RESETTABLE CALL POINT - MODEL: CP-32 - Resettable call point, with double pole change over contacts from N/C to N/O. The main function is to override the electrical locking/release devices in case of emergency. With Key to reset the switch.Dimensions: 87x91x53 mm, LED indicator (Optional),  Switch rating: 5A/125/250 VAC, Switch: Double pole, 1-year Warranty against defects in material and workmanship

View Complete Details

IXP20 Access Control system

Be it the home or office, the IXP20 Access Control system with its modern and sleek design, will complement the aesthetic appeal of any building while offering world-class security and control. The IXP20 provides Impro Technologies’ tried and tested Access Control proficiency, taking you into the future with complete peace of mind.  With the IXP20 system, access control is no longer reserved for the industrial or enterprise market. The IXP20 access control range consists of two products and meets the requirements of one to eight door applications, incorporating full stand alone and independent functionality. SPECIFICATIONS: 1 000 tagholders 5 000 buffered transactions 1 – 8 doors Up to 16 readers (8 APB doors) Up to 3 tags per person Up to 8 tagholder access groups

View Complete Details

door contacts

SURFACE MOUNT MAGNETIC DOOR CONTACTS - MODEL: DC101 - The surface mount magnetic contacts are designed for use in installations where a small, sealed unit is required. The reed switch is encapsulated in an exclusive polyurethane potting compound preventing moisture from entering the switch and causing false alarms. Contact Type: Closed Loop, Contact Rating: Breakdown Voltage 100v / Max. Switch Current 0.5A,  Opera. Gap:1.25 Inch, Lead Wire: Spacers, Cover and Screws Included, Housing: White, Brown , Grey ABS,  Dimension: 64*19*13mm, Listings: UL, CE, CUL RECESSED MOUNT MAGNETIC DOOR CONTACTS - MODEL: DCB036 - The recessed mount magnetic contacts are designed for use in installations where a small, sealed unit is required. The reed switch is encapsulated in an exclusive polyurethane potting compound preventing moisture from entering the switch and causing false alarms. Contact Type: Closed Loop, Contact Rating: Breakdown Voltage 100v / Max. Switch Current 0.5A, Opera. Gap: 20-30mm, Lead Wire: Spacers, Cover and Screws Included, Housing: White, Brown,  Grey ABS, Listings: UL, CE, CUL

View Complete Details

Door Closers

BRITON 1120B SPRING ADJUSTABLE OVERHEAD DOOR CLOSER - MODEL: BR1120B - The Briton 1120B is an overhead door closer with all the features of the Briton 1110 plus additional adjustable back check and wind through power adjustment. It is fully tested to EN 1154 and EN 1634, is CE marked and Certifire approved. This door closer is designed for medium usage applications such as internal office doors etc. Suitable for doors up to 1100mm wide. 2 hour fire tested. Maximum door weight 80kg, 10 Year Warranty,  Certifire approved - CF388 certificate, Non-handed - can be used on both left and right hand opening doors,  Supplied with fixings for all standard fitting applications, Adjustable closing speed, latching action and back check - ideal for doors that may be opened too quickly or caught by the wind, High quality silicon chrome alloy steel coil springs, Superior quality hydraulic fluid providing excellent performance and longevity. Aluminum Medium-Duty Door Closer 80KG - MODEL: DCL80 - The Aluminum Medium-Duty Door Closer is designed for many different commercial door applications. This Door Closer is suitable for interior commercial doors ranging from 60-80KG. The closer is packaged with a parallel arm bracket to allow for Tri-Pack installation. Max Door Weight: 60-80 KG, Max door width: 1100 mm, Spring Power: EN3-4, Max Opening Angle: 180 °, Closing speed adjustment: Yes, Hold Open: Yes, Passed durability test: 1, 000, 000 cycles,  Applicability: -20'C -55”C, Selective Color: Silver/Black/Milky/Gold.

View Complete Details

Magnetic Locks And Brackets

600LBS (280KG) Single Door Electromagnetic Lock - Door Status Monitoring - MODEL: 600MDSM - 5-year Warranty against defects in material and workmanship. Collinear Load Test 600Lbs(280KG). Dual Voltage - 12 or 24 VDC(optional).Built-in reverse current protection device (MOV). Anti-residual magnetism design, antiwear manufacturing materials. Shell is made of high-strength aluminum aIIoy, Anodized. DuaI Insulative Hosing to increase holding force, CE certification for EU. Complete electromagnetic suction with no mechanical failure. 600LBS (280KG) Double Door Electromagnetic Lock - Door Status Monitoring - MODEL: 602MDSM - 5-year Warranty against defects in material and workmanship. Collinear Load Test 600Lbs(280KG). Dual Voltage - 12 or 24 VDC(optional).Built-in reverse current protection device (MOV). Anti-residual magnetism design, antiwear manufacturing materials. Shell is made of high-strength aluminum aIIoy, Anodized. DuaI Insulative Hosing to increase holding force, CE certification for EU. Complete electromagnetic suction with no mechanical failure. Mounting Bracket – ZL Type for 600LBS Electromagnetic Lock - MODEL: 600ZL - Dimensions: L:250x47x28.5(mm) Z:180x50x50(mm), Material: High Strength Aluminum, Sandblast Finished Opening Mode: 90 Degree Door, Finished for Shell: Anodized aluminum, Door Type Applicable: Wooden, Glass,  Metal and Fireproof doors, Weight: 0.75kg Mounting Bracket – U Type for 600LBS Electromagnetic Lock - MODEL: 600U - Dimensions: 180Lx28Wx41H(mm), Material: High Strength Aluminum, Sandblast Finished, Opening Mode: 90 Degree Door,  Finished for Shell: Anodized aluminum, Door Type Applicable: Frameless Glass Door, Weight: 0.32kg Mounting Bracket – F Type for 600LBS Electromagnetic Lock - MODEL: 600FB - Material: High Strength Aluminum, Sandblast Finished, Opening Mode: 90 Degree Door, Finished for Shell: Anodized aluminum, Door Type Applicable: Frameless Glass Door, Weight: 0.85kg Wireless Remote Control for 600lbs MDSM Electromagnetic Lock - MODEL: RCEPB - Our remote control is designed for access control applications with the 600lbs MDSM Electromagnetic Lock. The signal can easily penetrate walls and uses Rolling code chip technology. Dimensions: 62Lx43.5Wx30H(mm), Material: High Strength Aluminum, Sandblast Finished, Input: 12VDC (24VDC by Optional), Current: 8mA, Contact Output: NO/NC/COM, Transmitting Frequency: 433.92MHZ, Capable of controlling: Up to 30 Transmitter, Finished for Shell: Plastic, Abrasion Resistant, Weight: 0.09kg

View Complete Details

Power Supplies

Power Supply Unit 12V 2A - MODEL: PS12 - Simply & Professional appearance for power cabling. Easier installation, saving time and providing a more secure cable connection. It provides stable DC 12V current. Output: DC12V+-15%, Input Voltage: 110~240V, Output Current: 2A, Material: Plastic aluminum alloy,  Power adapter (105cm cable / 3-flat-pin plug), Weight: 105 g, 1-year Warranty against defects in material and workmanship, EU CE certification. Power Supply Unit with Cabinet 12V 3A without battery - MODEL: PS3A - The PSU is self-protected against overload, over charge and wrong polarity, etc. If the load short-circuits, the power supply will halt output, and continue to work automatically when the short-circuit is settled. Input: AC190-265V 50-60Hz,  Output: DC12V+-15%, Output current: Max 3A, Storage battery: 12V/7AH, 1-year Warranty against defects in material and workmanship. EU CE certification. Power Supply Unit with Cabinet 12V 5A without battery - MODEL: PS5A - The PSU is self-protected against overload, over charge and wrong polarity, etc. If the load short-circuits, the power supply will halt output, and continue to work automatically when the short-circuit is settled. Input: AC190-265V 50-60Hz,  Output: DC12V+-15%, Output current: Max 5A, Storage battery: 12V/7AH, 1-year Warranty against defects in material and workmanship. EU CE certification.

View Complete Details

backup batteries

Backup Battery 7A 12V Sealed Lead Acid Battery: 12Volts - Capacity: 7 AH - Non-Spillable Sealed Construction, Absorptive Glass Mat System (AGM System), ABS container and cover, Maintenance-Free Operation, Low Pressure Venting System, Heavy - Duty Grids, Low Self-Discharge - Long Shelf Life, Wide Operating Temperature Range.

View Complete Details

Exit Push Buttons

Square Door Release Exit Button (Night Luminous) - MODEL: PBT-91S - Dimensions: 86Lx86Wx20H(mm),  Standard Structure: Aluminum Panel, Stainless Steel Button, Input Voltage: DC12V±10%, Current Rating: 3A@36VDC Max, Output Contact: NO/COM, Door Type Applicable: Hollow Door and embedded electric case,  Mechanical Life: 500, 000 tested, Weight: 0.5kg Narrow Door Release Exit Button (Night Luminous) - MODEL: PBT-92T - Dimensions: 86Lx50Wx20H(mm),  Standard Structure: Aluminum Panel, Stainless Steel Button, Input Voltage: DC12V±10%, Current Rating: 3A@36VDC Max, Output Contact: NO/COM, Door Type Applicable: Hollow Door and embedded electric case,  Mechanical Life: 500, 000 tested, Weight: 0.25kg SQUARE STAINLESS-STEEL EXIT PUSH BUTTON - MODEL: PBT94S - Dimensions: 86Lx86Wx20H(mm),  Standard Structure: Aluminum Panel, Steel Button, Input Voltage: DC12V±10%, Contact Rating: 3A@36VDC Max, Output Contact: NO/COM, Mechanical Life: 500, 000 tested, Door Type Applicable: Hollow Door and embedded electric case, Weight: 0.15kg NARROW STAINLESS-STEEL EXIT PUSH BUTTON - MODEL: PBT93S - Dimensions: 86Lx28Wx20H(mm) Standard Structure: Aluminum Panel, Steel Button, Input Voltage: DC12V±10%, Contact Rating: 3A@36VDC Max, Output Contact: NO/COM, Mechanical Life: 500, 000 tested, Door Type Applicable: Hollow Door and embedded electric case, Weight: 0.1kg Square Exit Door Key Switch Button (Plastic) - MODEL: PBKS-93 - Dimensions: 86Lx86Wx20H(mm),  Standard Structure: Stainless Steel Plate, Steel Button, Input Voltage: DC12V±10%, Current Rating: 3A@36VDC Max, Output Contact: NO/COM, Door Type Applicable: Embedded electric case, Mechanical Life: 500, 000 tested, Weight: 0.064kg SQUARE INFRARED HANDSFREE SENSOR EXIT BUTTON - MODEL: PBT98IR - Dimensions: 86Lx86Wx29H(mm), Standard Structure: Aluminum Panel, Steel Button, Input Voltage: DC12V±10%,  Contact Rating: 3A@36VDC Max, Output Contact: NO/NC/COM, Mechanical Life: 500, 000 tested,  Door Type Applicable: Hollow Door, Suitable Humidity: 0-95% (relative humidity), Detection Range: 0.1 – 10cm, Weight: 0.2kg NARROW INFRARED HANDSFREE SENSOR EXIT BUTTON - MODEL: PBT97IR - Dimensions: 115Lx70Wx29H(mm), Standard Structure: Aluminum Panel, Steel Button, Input Voltage: DC12V±10%,  Contact Rating: 3A@36VDC Max, Output Contact: NO/NC/COM, Mechanical Life: 500, 000 tested, Door Type Applicable: Hollow Door, Suitable Humidity: 0-95% (relative humidity), Detection Range: 0.1 – 10cm, Weight: 0.16kg

View Complete Details

Emergency Break Glass

DOUBLE POLE EMERGENCY BREAK GLASS - GREEN - MODEL: DP21G - Dimensions: 86Lx86Wx50H(mm),  Standard Structure: Fireproof Material, Easy to install, Input Voltage: DC12V±10%,  Contact Rating: 3A@36VDC Max, Output Contact: NO/NC/COM, Mechanical Life: 500, 000 tested, Door Type Applicable: Exit Door, Emergency Door, Weight: 0.2kg DOUBLE POLE EMERGENCY BREAK GLASS - RED - MODEL: DP21R - Dimensions: 86Lx86Wx50H(mm),  Standard Structure: Fireproof Material, Easy to install, Input Voltage: DC12V±10%,  Contact Rating: 3A@36VDC Max, Output Contact: NO/NC/COM, Mechanical Life: 500, 000 tested, Door Type Applicable: Exit Door, Emergency Door, Weight: 0.2kg DOUBLE POLE EMERGENCY BREAK GLASS - RED - MODEL: DP21R - Dimensions: 86Lx86Wx50H(mm),  Standard Structure: Fireproof Material, Easy to install, Input Voltage: DC12V±10%,  Contact Rating: 3A@36VDC Max, Output Contact: NO/NC/COM, Mechanical Life: 500, 000 tested, Door Type Applicable: Exit Door, Emergency Door, Weight: 0.2kg DOUBLE POLE EMERGENCY BREAK GLASS - YELLOW - MODEL: DP21Y - Dimensions: 86Lx86Wx50H(mm),  Standard Structure: Fireproof Material, Easy to install, Input Voltage: DC12V±10%, Contact Rating: 3A@36VDC Max, Output Contact: NO/NC/COM, Mechanical Life: 500, 000 tested, Door Type Applicable: Exit Door, Emergency Door, Weight: 0.2kg

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • ASME DWC-LLC
  • Office 142, 1st Floor, Building A3, Dubai World Central Business Park, Dubai South, United Arab Emirates, Dubai, United Arab Emirates