Atlas Power Solutions Dubai

Line interactive UPS systems monitor the incoming power, if it detects a fluctuation or a failure, it either boosts or decreases power using automatic voltage regulator or runs on batteries. Having the system bypassing the utility directly to load, during power outages or failures, there would be a short interruption of up to 4 milliseconds, which is fast enough to keep most of the equipment operating without interruption.

Online UPS also known as double conversion, provides the highest level of protection by isolating load from utility. The system works by continuously converting AC to DC and then inverts it back to AC. Having the system continuously operation, there is a zero interruption period between power outage and operation on batteries.

Natural gas-fueled engines emit fewer nitrogen oxides and particulate matter than comparable diesel-fueled engines, and they avoid the fuel containment, spillage, and environmental concerns associated with storing diesel fuel. A key benefit to natural gas fuel is long running time. Because natural gas is supplied by a utility, refueling is not an issue. The conditions that lead to widespread power outages—severe storms, equipment failures, etc.—do not typically affect the natural gas infrastructure. This means you can enjoy long running times in your application from  Generac  gaseous-fueled standby generators without needing to refuel. We have a wide range of commercial and industrial Generac gaseous-fueled generators, 8 KW up to 500 kW. That means you can choose the right single generator you need for your application, or get megawatt-level power from several generators connected in parallel as part of a  Generac  Modular Power System (MPS).

The SLI15 1.5kVA Inverter Series provides an ideal solution for telecom, IT, and industrial applications. Due to innovative technology solutions like the patent-pending “Compact Coil”, the SLI15 inverters packs the 1500 watts of power into a light (5.6 kg) and compact package that is mountable in 19” racks and is only one rack unit high. The SLI15 1.5kVA Inverter Series offers four models for different input (24 and 48 VDC) and output (115 and 230 VAC) voltage combinations. An integrated controller, along with an optional internal Static Transfer Switch (STS) enable flexible and scalable systems which are truly “plug and play”, and require no external subsystems. The inverters can be stacked up to the power level needed by each application up to a maximum of 6 units and also have the capability to be configured for generating a 3-phase voltage source. Electrical performance of the SLI15 1.5kVA Inverter is exemplary of a top-of-the-market product with efficiency that peaks at 93% and a patent-pending control algorithm that compensates current harmonics on the DC side without using bulky and expensive filters. The SLI15 1.5kVA Inverter includes a powerful on-board Digital Signal Processor (DSP) that allows easy programming of main parameters through use of its front-panel keypad and LCD display. In addition, the SLI 15 can be interfaced with an RS-485 serial communications link. Features & Options 24V or 48VDC Input 115VAC or 230VAC Output New, compact design: 1U height x 19” width x 14.94” depth; 19” rack-mountable High efficiency: up to 93% True sine wave output Parallelable output with current share and synchronization of up to 6 inverters working in parallel Front panel LCD display to monitor and set the main parameters RS-485 serial link Constant input current sink from battery for extended life Optional hot-swappable configuration Optional internal Static Transfer Switch In the -STS version, ON line (primary source to the load) or OFF line mode (UPS like) Configurable for being used as Three Phase source, 3 units Safety Standards EN60950-1, IEC60950-1, UL/CSA 60950-1

THE POWER YOU NEED. WHERE AND WHEN YOU NEED IT. Many get their first introduction to portable generators when they need emergency power. But portable generators have many uses around the home and on the job site.

We have the best choice of commercial /Industrial manual or automatic operation diesel generator sets in the market using  MTU ,   Perkins  and  Generac  engines which ranges from 12 kW to 2.6 MW , all of them are water-cooled, four-stroke engines, which ensure low fuel consumption. Diesel generators could be assembled with 4-6 cylinders in line or 8-20 in V angle, naturally aspirated and turbo-charged engines with post-cooling system. The electric system operates at 12 or 24 volts, including starter and battery-charging alternator. The Synchronous Alternator are coupled directly to the engine with flexible steel discs, brushless, with an internal voltage regulator, transistorized, keeping the voltage from empty to full load + 5%, designed to work properly at 1500 RPM, or 1800 RPM 50 Hz, 60 Hz, 0.8 power factor, NEMA insulation, CLASE H with varnish. These generators are leak-proof and provided with a cooling fan. Engine and alternator are directly coupled into a single body assembling unit, ensuring so a proper alignment, and could be mounted on an open skid base frame or an integral base fuel tank.