Post Buy Requirement
BL
AL JADAF, United Arab Emirates
Add Review

Other Products / Services

After Coolers


AIR-COOLED AFTER COOLER WITH MOISTURE SEPARATOR


OMI ITALY


BLASTLINE UK


Atmospheric air entering a compressor contains water vapor. The compression process concentrates these water vapors. Once the air travels downstream, the vapor cools and condenses into liquid. If not removed, it contaminates the entire compressed air system and causes corrosion. This corrosion in turn leads to air leaks, pressure drop and scale formation. Products and processes are ruined, resulting in lost production time.


Air-Cooled After Coolersprovide economical cooling by utilizing ambient air to cool the hot compressed air from an air compressor. Discharge air from an air compressor is generally 180F 350F, depending on the type of compressor. With a properly sized after cooler, as much as 60% of the water in compressed air can be removed.



Categories:Blasting, Speciality Equipments
View Complete Details

AIR DRYER SYSTEM


WITH AIR COOLER

SCHMIDT USA


This System effectively provide cooler, cleaner and drier air to your blasting system while maintaining negligible drop in pressure. Wet air causes flash rusting, clogs blast pots with damp abrasives, damages control systems and reduces productivity. Drier air reduces wear, downtime and maintenance, saving time and money.



  • Compact, vertical air flow design for improved efficiency.

  • Skid mounted with forklift pockets and full-load lifting eyes for portability; Stationary, Portable and custom systems available

  • Protective bar grating over radiator

  • Pneumatic fan motor standard; Electric fan motor available

  • Choice of system type to meet your specific application requirements: After cooler (ACS) or Air Dryer (ADS)

  • Air Dryer Systems units use deliquescent; therefore the vessels are hot dipped galvanized to protect your investment.



Categories:Blasting, Speciality Equipments
View Complete Details

Air Purifier


ACF FRANCE


The air purifier provides the ideal solution for humidity problems encountered during blasting. It protects the pneumatic tools from oxidation, formation of ice and breakdowns.


Compressed air contains water causing oxidation, formation of ice and clogs that cause breakdowns, losses in yield and premature wear. These inconvenience could be eliminated with the type Z Purifier (sandblasting). The Purifier can be connected to the air hose linking the air compressor to the pneumatic tool. For optimal output, it is recommended to install the device as close as possible to the tool and as far away as possible from the compressor.



Categories:Blasting, Speciality Equipments
View Complete Details

Air Receivers


AIR RECEIVER CUM HIGH VOLUME MOISTURE SEPARATOR


BLASTLINE


Air receiver tanks not only serve as temporary storage, but they also allow your system to perform more efficiently. Rated to handle up to 800 / 1600 / 3000 CFM with less than 1% pressure drop through the separator.


Because of the immense pressure they contain and their importance to the system, they must be built to be exceptionally durable and strong.


Precision engineered stainless steel coalescing element traps moisture as the compressed air expands inside ASME coded pressure vessel. Moisture separators help reduce the amount of moisture in the blasting system, resulting in a smoother, more even flow of abrasive and reduced contamination of controls.


There are many types of applications requiring air receiver tanks, including improving speed or torque, storage to protect from pressure fluctuations, storage to meter a high flow-rate application into a system, and more.


No matter the use, its important to size it to your needs. We can size a tank based on the compressor output, system size and air demand cycles.



Categories:Blasting, Speciality Equipments
View Complete Details

Automatic Shot Blasting Machines


ROLLER TYPE AUTOMATIC SHOT BLASTING MACHINE


Roller Conveyor shot blasting machine is built to clean steel plates and profiles. They are mostly used for descaling, derusting, paint removal, paint preparation, deburring and general surface preparation prior welding, cutting, machining and burning operations.


Treated objects move through the shot blasting machine on a roller conveyor. Blasting wheels are made from wear resistant materials with sufficient power to provide efficient shot blasting.


Roller conveyor shot blasting machines robust housing is protected by wear resistant shields made from manganese steel liners.


Series of rubber screens keep the abrasive inside the shot blasting machine in entry chamber and the exit cleaning chamber. Rotating brush and high-pressure fan remove the abrasive from the treated object before it exits the blasting machine. Screw conveyors and elevator provide returning and continuous automatic cleaning of the abrasive.



Categories:Blasting, Capital Equipments
View Complete Details

Blast Room


Blastline range of high quality, innovative, reliable blast rooms satisfies your requirement providing a fully enclosed blast chamber to perform abrasive blasting, grit blasting, bead blasting and surface preparation & finishing operations.


Indoor blasting is extremely beneficial as it allows you to continue production regardless of the weather, time or surrounding activities. A blast facility is an extremely useful investment that pays off in a relatively short period of time.


Often making use of clients existing buildings can offer significant cost savings. In addition, Blastline provides an upgrade service to existing plant which can help reduce down time, increase productivity and lower running costs.



Categories:Blasting, Capital Equipments
View Complete Details

Blasting Cabinet


MHG GERMANY


Blastline deals with an extensive line of standard and custom built blast cabinets according to your needs. The models are tailored for different media types and applications including specialized dust handling for cleanliness, outstanding visibility and enhanced media recycling.



  • Industrially proven, typical workshop blasting system

  • Suitable for all common blasting applications

  • With its installation height, it also enables precise and convenient processing of medium-sized components

  • Designed for non-stop blasting

  • Economic consumption of grit


AREAS OF APPLICATION



  • Processing of laser-cut & torch-cut parts

  • Heavy-duty steel construction

  • Aviation technology

  • Turbine technology

  • Pharmaceutical industry

  • Chemical industry



Categories:Blasting, Capital Equipments
View Complete Details

BLASTING CONTAINERS


2 fully equipped units for sand blasting/shot blasting work.


Mobile and easy to use, BL 200 (6m) and BL 400 (12m) containers enable sand blasting / shot blasting / shot peening in a closed and secured environment meeting existing standards. Safe and waterproof, the containers can be installed inside and outside as well.



Categories:Blasting, Capital Equipments
View Complete Details

BLASTING GUNS


Designed for dry abrasive blasting where the air supply is limited or the job is small. It can be used with all common media to clean or etch metal clean masonry, etch glass and other durable surfaces.



Categories:Blasting, BLASTING TOOLS
View Complete Details

CYCLONE V-AREN


The cyclone V-Aren is used as a preventive treatment for the partial demolition of polluting elements in the air. It is suitable for the separation of potentially explosive dusts (ATEX) from coating operations.


Benefits
The cyclone V-Aren is able to recover over 96% of the input powder using the centrifugal force. The direction of the air outlet is adjustable thanks to a nut installed in the upper part. The V-AREN cyclone dust collector allows the recovery and reuse of the powder by means of a system of automatic sieve located on the discharge of the cone. It is convenient and fast to clean during the color change, easy to carry in a horizontal position and easy to install.



Categories:Blasting, Capital Equipments
View Complete Details

Professional Dehumidifier


WILMS GERMANY

This professional dehumidifier is best suited to avoid and eliminate damage in rooms, on inventory and humidity sensible materials. This dehumidifier is like all other units easily portable with large wheels and it is easily handled and operated with just one switch.



Categories:Blasting, Speciality Equipments
View Complete Details

Dust Collectors


TRANSPORTABLE DUST COLLECTOR


Block ventilator mounted on frame for extraction of dust and paint fumes on site. This system is constructed for extraction of light concentrations of dust up to 0.1 g/Nm3. The suction inlet is provided with an adapter for connection of a 300-mm dia. extraction hose. This is also available in exe-execution for usage of extraction of paint spray and flame spray dust, to be connected to an extraction box, which is provided with either a paint spray filter or metal labyrinth.



Categories:Blasting, Capital Equipments
View Complete Details

DUST FREE BLASTING EQUIPMENT


BLASTLINE EDUCT-O-MATIC


Clemcos closed-circuit suction blast tool for spot cleaning, removing weld spatter, and deburring cut metal edges. Special attachments let you blast inside and outside corners, and on rough surfaces.



Categories:Blasting, BLASTING TOOLS
View Complete Details

Fume Extractors


AIR SYSTEMS USA


LARGE PORTABLE FUME EXTRACTOR

This fume extractor provides 750 CFM flow through a 13 hood and is deal for welding and soldering applications where large flow volume is required. With 270 degree movement and 10 foot arm it is easy to positions the hood next to the work piece. The pleated pre-filter and HEPA filter remove 99.97% at 0.3 micron and meets the OSHA permissible Exposure Limit (PEL for hexavalent chromium of 5 g/m3



  • 115 VAC motor, 12.5 amps

  • 13 inch fume capture hood with adjustable flow damper-optional hood light

  • HEPA Filter, 99.97%, UL-586 approved, DOP Tested 1000 cfm flow rate

  • 6 inch diameter, 10 ft. ducted arm with 270 degree movement

  • 750 cfm flow with 10 ft.arm with 270 degree movement

  • Filter change indicator

  • Steel Cabinet

  • 24 x 24 x 1 pleated pre-filter holder

  • Lift-up filter door for easy access filter change 5 Heavy Duty Casters

  • 5 Heavy Duty Casters


SMALL PORTABLE FUME EXTRACTOR

Designed for light Duty and Short Duration Welding, the small HEPA filtered portable fume extractor provides 230 CFM flow through a 5 hood and magnetic base stand. Ideal for many small welding and soldering applications where large cabinet style fume extractor are not practical, such as, spot or bench top welding. The features removable slag tray, spark screen 3 pleated pre-filters and a final HEPA filter (99.97% at 0.3 micron).



  • 2 each, 115 VAC, 800 watt vacuum motors with 15 amp overload protector

  • Final stage HEPA filter, 99.97% at 0.3 micron

  • 70 dbA noise level at 3 feet w/ built-in noise suppressor

  • 230 cfm flow rate variable speed

  • Fire retardant, 10ft, flexible

  • Dual handle assembly

  • Three pleated inter mediate filters 2.5 ID hose supplied with 2.5 hose coupler for adding additional hose

  • 5 fume capture hood with magnetic base stand supplied



Categories:Blasting, Speciality Equipments
View Complete Details

GARNET RECYCLING MACHINE


SPECIALLY DESIGNED COMPACT RECYCLING SYSTEM FOR THE EFFICIENT CLEANING AND REPROCESSING OF USED GARNET


Garnet Recycling Systems give you the ability to use your Garnet Abrasive over and over again for maximum cost savings. Abrasive consumption as low as 1.6kg Garnet per m2, recycling allows for greatly reduced abrasive purchases and reduced transport, handling and disposal costs.


The Garnet Recycling System can be accurately adjusted to achieve the optimum particle size balance for any particular blasting requirement. Recycling is done in a dry process. Wet or damp Garnet must be dried prior to reprocessing. Compact designed custom built recycling system to suit your needs.


STANDARD SPECIFICATION



  • 230/460 volt

  • Require 20 CFM @100 psi

  • Output/hr 2000 kg

  • Includes bucket elevator, rotary screen, air wash

  • Separator and vibratory screen

  • External ducting

  • Fully adjustable suction capacity and extraction



Categories:Blasting, Capital Equipments
View Complete Details

GRIT RECOVERY UNIT WITH PRE-SEPARATOR


SIBILIA ITALY


Vacuum cleaners ideal for use in difficult conditions, equipped with a cooling lobe pump which allows for a substantial vacuum level. This system is a suction unit to be combined with a pre-separator for material collection. The filter unit is composed of a main filter made of fabric which is electro-mechanically shaken and pocket shaped to reach a suitable surface. The safety filter is a class M air filter cartridge.



Categories:Blasting, Capital Equipments
View Complete Details

Heatless Adsorption Dryers


OMI ITALY


New series of adsorption dryers characterized by extremely reduced size and weight, ease of assembly thanks to the new aluminum design additionally guarantees excellent resistance to corrosion. The control system has been simplified while guaranteeing the programmability of the working times.


Various industrial applications, such as for example chemical, pharmaceutical and laboratory facilities required high-quality compressed air; with adsorption desiccant dryer supplying a dew point air of -40C, essential for these and other applications.



  • Working pressure: 7 bar

  • Inlet air temperature: 35C (40 max)

  • Dew point at 7 bar pressure: -40C

  • Work/Purge cycle: 5/5 min.

  • Regeneration air consumption: 10/15% of nominal flow rate

  • Standard Voltage: 230V/1ph/50Hz



Categories:Blasting, Speciality Equipments
View Complete Details

Industrial Dust Collector


SIBILIA ITALY


Utilizing the leading edge technology in filter cartridge media and clean down systems, these units perform reliably and consistently ensuring your workplace, blast room or cabinet are kept dust free.


FEATURES



  • Heavy Duty Steel Frame and Construction

  • Automatic reverse pulse filter cartridge cleaning with high efficiency clean down technology

  • Large access door(s) to maintain filter media cartridges

  • Multiple extraction spigots (Subject to model)

  • High vacuum extraction fans available

  • Acoustic paneling available to reduce noise and increase operator / workshop comfort

  • HEPA filter after filters available

  • Pressure differential gauge to monitor filter media condition



Categories:Blasting, Capital Equipments
View Complete Details

INTERNAL PIPE BLASTING


HOLLO BLAST


In the factory or on site, now you can clean the insides of pipes upto 36 ID



  • Easy to set up

  • All use standard pressure blast machine

  • No need to rotate pipe or tubing

  • Fast, economical, efficient pipe cleaning


The Hollo-Blast cleans the full 360 degree inside diameter of pipe to white metal finish. The Hollo-Blast will accommodate pipes from 2 inch to 12 inch I.D and length up to 40 feet. Any abrasive (except aluminum oxide or silicon carbide) 20 mesh or finer may be used. In operation, the proper model is attached to a pipe lance and connected to blast hose. Hollo-Blast tools feature tungsten carbide nozzles with tungsten carbide deflector tips to distribute a uniform blast inside small diameter pipe.


ROTO BLAST / SPIN BLAST


The Spin-Blast cleans pipe at rates unobtainable by any other means. The Spin-Blast comes in different sizes: for pipes 8-inch ID to 36-inch ID, with the standard nozzle head.


Adjustable carriage are used to fit the tool to the pipe diameter size. These Spin-Blast models are productivity tools, best used in a controlled environment, where they can be maintained as needed for the production schedule. Spin-Blast mounts two venturi blast nozzles in a spinning head to blast large diameter pipe. Centering carriages help ensure uniform coverage.



Categories:Blasting, BLASTING TOOLS
View Complete Details

MJT CARTRIDGE DUST COLLECTOR


The cartridge dust collector MJT is a filtration system to purify the air used to dry the solid particles in suspension. Its suitable for the extraction of potentially explosive dusts (ATEX) from painting operations. The input of the dust collector has been studied to have an optimum distribution of the fluid. The recovered material recovered discharged in a special bin installed under the hopper. The cartridge filter MJT is especially suitable for the intake of dust arising from powder coating of polyester, epoxy which may potentially cause explosive atmospheres (ATEX).


Benefits
The cartridges are run by reading the pressure drop of the filter elements for a more efficient cleaning with a lower compressed air consumption and longer life of filter elements. Maintenance can be easily carried out thanks to special cartridge access door. The cartridge dust collector MJT has a modular design, it is easy to be handled with a fork lift and carry. Thanks to the preparation of all electrical connections, tires and quick assembly of the three components (hopper, the filter body and box) the MJT is quick to set up both inside and outside. This model also ensures a low noise level thanks to the inclusion of the fan inside the soundproof box.



Categories:Blasting, Capital Equipments
View Complete Details

PORTABLE BLOWER FANS



  • Dynamically designed fan housing optimizes airflow efficiency.

  • Protective guards meets safety standards.

  • Air ducting can be connected at inlet or outlet ends.

  • All component are coated for wear resistant.

  • Impeller is designed for high static pressure providing higher airflow rate.

  • Diameter is equipped with heavy duty locking caster wheels and adjustable angle for easy mobility and setup.



Categories:Blasting, Speciality Equipments
View Complete Details

Portable Cooler


When the temperature rises, keep workers cool and working at their best with our evaporative coolers. Using the process of evaporation, the single speed portable evaporative cooler can easily reduce the temperature in all your hard-to-cool areas. A comfortable work site is a productive work site.


Large airflow, auto pump shut-off and easy roll casters make this cooling monster seems like gliding on air. It cools a huge 4000 sq. ft. area using just tap water and 115V.



Categories:Blasting, Speciality Equipments
View Complete Details

PRECISION BLASTING EQUIPMENTS


BRISTLE BLASTER ELECTRIC & PNEUMATIC

The MBX Bristle Blaster offers distinct advantages over the conventional surface preparation methods and will yield superior results with far less time and effort.
Bristle Blasting is a new, simple maintenance solution that removes corrosion and generates an anchor profile in a single step. It is suitable for spot repairs as well as larger areas where other processes are prohibitive does not use/produce environmentally unsafe or hazardous material.


ADVANTAGES AND PERFORMANCE OF THE BRISTLE BLASTER TECHNOLOGY

  • Removes corrosion, mill scale and protective coatings


Surface cleanliness with Near White/White Metal appearance no grinding or polishing during operation



  • Creates a 2.5 3.3 mil surface texture/anchor profile


Benchmark steel is API 5L pipeline steel profile will vary with hardness of substrate.



  • Improves integrity of treated surfaces


Generates compressive residual stress along treated surfaces providing crack growth resistance, improved fatigue live and improved corrosion resistance



  • Negligible heat generation


Treated surfaces free of thermal damage and/or heat markings



  • Cleans and profiles quickly and economically


Using long lasting, safe Bristle Blaster Belts eliminates the need for costly abrasive blast equipment



Categories:Blasting, BLASTING TOOLS
View Complete Details

REACTION FANS


Rugged, cast aluminum housing and fan blades make these fans ideal for hazardous locations and demanding ventilation projects. The RF design utilizes action-reaction principles; compressed air is discharged through nozzles located at the tip of the fan blades providing extremely efficient, high-volume, low maintenance air movers.



  • For 20 inch (50.8 cm) to 24 inch (60.96 cm) tank man ways

  • 11, 000 to 16, 900 cfm (18, 689 to 28, 713 m3/h) at 80 psig

  • Use for fresh air supply or fume exhaust

  • Can be carried or rolled to job site

  • Spark resistant cast aluminum housing and fan blade

  • Permanently lubricated bearings

  • Flanges mate with 20-inch (508mm) and 24-inch (610mm) API tank opening



Categories:Blasting, Speciality Equipments
View Complete Details

REFRIGERANT DEHUMIDIFIERS


MUNTERS SWEDEN
XR SERIES LIGHT WEIGHT SUITABLE FOR COMMERCIAL USE

  • Highly efficient dehumidification coil

  • Low noise ventilation fan

  • Hygrostat automatically stops the machine when not needed (accessories)

  • Electronic defrost system

  • Environmental friendly refrigerant R134A

  • Handle and wheels for easy movement

  • Nonstop water discharge option

  • Additional heating coil 1, 000 W

  • Compact polymer casing


XRC LT SERIES HIGH PERFORMANCE REFRIGERANT DEHUMIDIFIER

  • 3 sizes available, 30, 50, 75 liters per 24h, for wide range of applications

  • Low temperature operation capability

  • Operating range +5 to 30 degree C

  • High efficient dehumidification coil

  • Rigid stainless steel casing for professional use

  • Low noise ventilation fan

  • Hygrostat automatically stops the machine when not needed (accessory)

  • By-pass valve defrost system

  • Environmental and ozone friendly refrigerant R407C

  • Handles and wheels for easy movement

  • Nonstop water discharge option by pump

  • Antibacterial air filter as standard


XRC SERIES SUITABLE FOR PROFESSIONAL USE

  • 4 sizes available, 25, 40 , 55 & 90 liters per 24h, for wide range of applications

  • Operating range +12 to 30 degree C

  • Rigid stainless steel casing

  • High efficient dehumidification coil

  • Low noise ventilation fan

  • Hygrostat automatically stops the machine when not needed (accessories)

  • Electronic defrost system

  • Environmental and ozone friendly refrigerant R407C

  • Handle and wheels for easy movement

  • Nonstop water discharge option by pump

  • Antibacterial air filter as standard



Categories:Blasting, Speciality Equipments
View Complete Details

SODA BLASTING MACHINES


ACF FRANCE


The ACF COLIBRI is the ideal system for all small air blasting jobs on furniture, doors, bronze, moulds


It is compact, cost-effective and easy to operate on surfaces such as, wrought iron, metal, wood, stone, brick



Categories:Blasting, Blasting Machines
View Complete Details

SPOT BLASTING MACHINES


JAFE SANDBLASTER SPAIN


Special sandblasting machine for small precision works in decoration, wood or metal industry.



  • Portable : Equipped with wheels and adjustable handle for comfortable safe use.

  • Safe : Automatic depressurization when releasing the trigger of the gun.

  • Ergonomic Spray Gun : Equipped with sand dosing valve.



Categories:Blasting, Blasting Machines
View Complete Details

TYPHOON BLOWER


Ideal for pneumatic machine a Typhoon system consists of a blower with one or several air knives and tubes. Each system will be tailored specifically for a customers application, when the customer can determine the air pressure (blow of force) needed to eliminate static charges and/or removing impurities. Dependent from the required air pressure, the capacity of the blower can be determined, to offer the right blower.



  • Low noise level

  • Minimal maintenance

  • Cooler running bearings

  • Small dimensions

  • No vibration, and therefore complete dynamic stability

  • Easy installation

  • Pulsation-free discharge

  • Higher pressure ratio

  • Longer grease life

  • 0% oil-free air

  • Continuous duty



Categories:Blasting, Speciality Equipments
View Complete Details

WATER OIL SEPARATOR


OMI ITALY


The patented 2-stage filtering system adsorbs the residual amount of contaminants, without any need of complicated formula to dimension the unit. Such system, thanks to an electronic indicator, advises the operator when the filter element must be replaced.



  • It is suitable for every type of drain: manual, electronic and timed.

  • The oil is kept in the separator, and only the depurated water is let out.

  • There is no need to dispose of the oil, but only of the filtering elements.

  • It is suitable for every type of oil and emulsion, whereas for poly-glycol oil, contact our technical department.



Categories:Blasting, Speciality Equipments
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Blastline LLC (Blastline LLC)
  • Blastline LLC P.O. Box 30295 W.H.No. 103, Al Jadaf, United Arab Emirates
  • Share us via