canadian energy equipment manufacturing co Ras al khaima

The A60 Office Cabin of CEEM FZE is the first of its kind to be manufactured in its facility. CEEM ensures that the equipment meets various manufacturing international design codes and regulatory requirements. Considered as an oilfield services equipment, A60 Cabin was manufactured to the highest industry standards DNV 2.7-1, DNV 2.7-2 and ATEX, including compliance with SOLAS/IMO regulatory requirements for A60 fire protection to withstand hostile offshore and marine environments. The equipment is designed for optimum work efficiency, satisfying environmental, acoustic, safety, and security requirements for your peace of mind. Standard Technical Specification Dimension: 6058mm (L) x 2438mm (W) x 2592mm (H) Electrical Input: 380-690V 3 Phase 50/60Hz Electrical Supply Electrical Cabling: As per DNV 2.7-2 Transformer: 23KVA 6 Tap Transformer (1nos) Power Outlet Supply: 220v, 110v HVAC: Packaged AC (2 Ton working and 2 Ton on standby) Total Cooling Capacity: 24000BTU/h Total Heating Capacity: 6KW Operational Temp Range: -20°C to +55°C Output Voltage: 380v/3P/50/60Hz CPFG panel: ATEX Approved Exd IIB rated 4 Point Wall mounted Fully Automatic Fire and Gas Detection & Shutdown System Automatic Fire Dampers with local indication (fail safe), IS Sounder Pressurization Fan, Manual Call Point & Pressure Switch Gas Detectors H2S (1nos) and HC (2nos) Optical Smoke Detector, Heat Detector and Fire Break Glass HSE: Fire Extinguishers, First Aid Kit A60 Fire rated Insulation: wall, roof & floor Flooring: Floating Floor ( Marine Elastic Self-Leveling underlayment & Vinyl Floor Sheet A60 Window standard fitted (2nos) External Doors: A60 weather tight doors (3nos) Internal Door: B15 rated door from Airlock with A60 rated sight glass A60 Emergency Escape Hatch Furniture: Robust Custom Design of Work Desk, Over Head Cabinets and Chairs Painting: 240DFT three coat of marine painting system Slings and Shackles: DNV Certified Slings and Shackles with appropriate rating for lifting CAT 6 Data/Telephone points Certified PA Speaker Design and Standards DNV Approved ATEX Compliant Structural Design: DNV 2.7-1 Electrical  Design: DNV 2.7-2 CPFG panel: ATEX Approved Exd IIB rated SOLAS Compliant Zone 1 and Zone 2 Area Classification Zone 1

In line with CEEM’s ‘at a glance’ inventory philosophy, our Tool Houses and Workshops offer simplified tool and asset storage. Fully insulated and outfitted with slide out carrier air conditioning units, the CEEM Tool House is the perfect choice for remote locations. Shipping is made easy as the standard ISO footprint is used for its robust 2.7mm corrugated design. Standard Design Features Recessed power cable box Full length forklift pockets Lockable doors and drawers Removable rubber flooring Flush mounted stainless steel light fixtures Also available is an optional two Axis Chain Block with extension arms allowing outside access. Manufactured in models ranging from 10’-40’, CEEM offers a wide variety of configurations for your specific needs. Slide out generators and air compressors allow you to open the doors and go straight to work. Offering these as turnkey workshops or fully customized to your required specifications, our design team is at your disposal to create your purpose-built container today.

Mechanical Diesel Engine with no electronic control systems Mechanical shutdowns for high oil temperatures Sound attenuated housing Designed with maintenance and service access as a key factor with removable panelscoversdoors Oversized cooling system with direct drive hydraulic fans allowing radiators to be side mounted for easy cleaning Full fluid containment to prevent spillage DHPU system is connected to the HWU by way of quick couplers and hoses Filtration of hydraulic oil is provided by return line filtration The footprint and height of the DHPU container is sized fit into a standard 20ftr ISO shipping containers

Mitsubishi S6A3 marine engine 600 bhp Allison Transmission Model CLT (B) 6061-4 AXON/Demay HD 500 triplex Mud pump Rated 10 bbl/min 11, 200 psi max pressure rating with 4 1/2” plungers Light compact design Easy access engine and transmission for maintenance and removal Auxiliary power end cooling system of mud pump Can be lifted as 1 unit or separate Oversized cooling system Remote mud pump control up to 3meter from skid giving operator view of wellhead or pumping location Exhaust wrap on complete exhaust system

• Minimum water temperatureN/A
• Maximum water temperatureN/A
• Ambient extreme maximum(+)50º C

Zone 2 Power Pack Key Features Complete Zone 2 ATEX rated DHPU complete with DNV 2.7-1 certified framework. Engine Specification Detroit Diesel 12V92TA 750bhp Engine sub-frame complete with anti-vibration dampeners PYROBAN exhaust gas cooling system Hydraulic Fans, Air Compressor, Air Start Radiator sized and DNV design approved airflow calculation to 50°c ambient AMOTChalwyn Over Speed shutdown, Low Oil Pressure shutdown, Exhaust Gas Temperature shutdown, Coolant Temperature shutdown, Emergency Air shutdown