Post Buy Requirement
CS
Dubai, United Arab Emirates
Add Review

Other Products / Services

Bulk Wire Rope

Carl Stahl TECHNOCABLES provides you with a broad range of wire ropes and strands with many different diameters and constructions. They are available with and without coating in materials like stainless steel, galvanised steel or special materials.
View Complete Details

Pulleys

If ropes run over over pulleys the working life can be extended by the right choice of pulley and suitable wire rope.
The working life of the rope depends on the following factors:
Groove geometry
Ratio between groove diameter and rope diameter
urface quality of the groove
Material of the pulley
Rope construction
The ratio between groove diameter and rope diameter should be chosen according to the rope construction:
View Complete Details

Lifting Clamp Type CGSM

Suitable for lifting and turning (180) of smooth, machined or polished parts
Coated jaws protect the transport goods
The clamp will lock when attached to the load
Easy handling
View Complete Details

Clamp Type CGSMVZ

Suitable for lifting, turning (180), and transport of steel sheets, steel constructions and standard profiles
Large grab range 1 100 mm (0.04 3.94 inches), adjustable in 20 mm (0.79 inches) steps
Adjustment allows use for various material thicknesses
Locks automatically when clamp is attached to the load
Required minimum load 10% of load capacity
For goods with a surface hardness up to 32 HRC
Open construction full view and easy cleaning
High-quality fine-grained steel for a safe use
View Complete Details

CondorGrip Safety Lifting

Suitable for lifting, turning and laying of sandwich panels
Due to coated jaws no traces or damages on the material
Adjustable grab range
Uncomplicated exchange of the jaw for different profiles
Form-locking transport provides additional safety
Max. allowable diagonal pull is 30
Easy handling thanks to the wide jaw opening
For longer panels we recommend use of two clamps on a spreader beam or on suitable slings.
View Complete Details

Crane Systems




Leading Supplier Of Crane Systems in dubai

Latest measuring technology and highly skilled staff provide tailor-made solutions optionally suited to the conditions at site.




The Carl Stahl crane systems range includes:



  • Overhead travelling cranes(working load from 1 to 100 t)

  • Pillar jib cranes(125 to 6300 kg)

  • Wall jib cranes(125 to 5000 kg)

  • Portal cranes(50 to 5000 kg)

  • Movable cranes(100 to 1000 kg)

  • HB Light crane systems(63 to 2000 kg)

  • Mobile workshop cranes(1000 to 3000 kg)

  • Portal crane systems(250 to 2000 kg)

  • Electric Wire Rope Winches(250 to 1000 kg)

  • Aluminium crane systems(up to 1500 kg)


Carl Stahl supports you right from the start with the installation and commissioning of your crane system. The construction department implements the data and information recorded into CAD drawings and the system is planned and implemented in precise accordance with your requirements. Unpleasant and costly surprises during production and assembly can therefore be prevented.


Once our experienced specialists have completed the final assembly, we work with our independent crane experts to conduct the initial acceptance tests on the crane system. As part of our inspection service, we also offer you the necessary regular accident prevention inspections required in line with the German Accident Prevention Regulations BGV D6 and D8 (Services available in Germany only).

View Complete Details

Stainless Steel Range

The Industrial Inox stainless steel range from Carl Stahl offers special stainless steel slings and load suspension equipment for demanding industrial applications. Their rust-proof surfaces make the products ideal for use in the food industry, chemical industry, dye works, pickling plants, hardening shops and shipping industry - or in other words, in all areasareas where corrosion is a problem and aggressive materials are used.

View Complete Details

Hydraulic Equipment



Lifting and moving heavy loads safely have always been key issues that we keep very close to our hearts. These lifting operations very much depend on absolute precision, reliability and safety for man and machine. In collaboration with our partner Hi-Force based in UK, we created an extensive product range of hydraulic equipment for the fields of industrial hydraulics, hydraulic tools, hydraulic systems and hydraulic accessories.




We will be happy to undertake themaintenance and repair of your hydraulic equipment. Carl Stahl is one of the service and repair centres in Germany authorised by Hi-Force.


As part of theCarl Stahl Integrated Services, we test your hydraulic equipment (all makes) based on a check-list regardless of the manufacturer.


The complete range of hydraulic devices can be found in our "2015 Hydraulics" catalogue.Downloador order free of chargehere.

View Complete Details

Hydraulic Lifting Devices



Hydraulic lifting devices and transport skates are indispensable helpers in in-house installation, inspection or repair of heavy machinery or machinery parts. In collaboration with our premium partner Jung Hebe- und Transporttechnik, Carl Stahl offers a comprehensive range of "Made in Germany" products for the heavy duty lifting and transporting segment. With an operating pressure of 520 bar, specially designed hydraulic jacks lift machinery and other loads that can be subsequently moved with the transport skates.




Loads up to 160 tonnes can be safely manoeuvred with the adjustable and steerable transport skates thanks to a number of different types of rollers made of steel, JUWAmid or JUWAthan for a variety of ground conditions.


As part of theCarl Stahl Integrated Serviceswe undertake tests of your hydraulic equipment (all makes) based on a check-list regardless of the manufacturer.

View Complete Details

Load Restraint




Proper load restraint saves lives and ensures that cargo is delivered undamaged to its destination.

The purpose of load restraints is to secure the cargo against any acceleration, retarding, centrifugal and vertical forces and thus prevent it from sliding, tipping over or falling down.


Carl Stahl offers a wide range of lashing straps, lashing chains grade 8, 10 and 12, lashing systems, anti-slip mats and an extensive program of lashing accessories such as protective sleeves, ratchet pads or edge protectors.




The Carl Stahl product range includes:

View Complete Details

Wire Ropes Crane And Industrial Ropes

Carl Stahl Crane and Industrial ropes
always the right choice

Whether on construction sites, in production halls, at offshore sites, in elevators or in the logging industry: Industrial ropes from Carl Stahl are used in many sectors and for countless applications. Tailor-made to the requirements of our customers we will always offer the best solution no matter if bulk or assembled. Ideal for everyone who puts emphasis on quality, price and performance.


With our long experience and excellent expertise we know exactly, which rope suits your requirements. Make your choice from a wide range of leading German and European manufacturers, as well as from our premium-product rangeCondorRope.


More than 600 reels of special- and stranded wire ropes in different diameters are stocked in our warehouse, available in OEM quality or as high gradeCondorRopealternatives. We offer a wide range of tower crane wire ropes for Liebherr, Wolffkran, Potain, Terex-Peiner, Cadillon, Knig Cranes, Pekazett, Condecta, Arcomet, Ferro, Terex-Comedil, Raimondi and others. With our international distribution network consisting of 60 subsidiaries all over the world and our exclusive express delivery service you will receive most of the products within 24 hours. This also includes items from our accessory programme like terminals, thimbles or the environmentally friendly lubricants and corrosion inhibitors of ourCondorLuberange.


Equipment and Services:
- Swaging up to Z 56 / XL 76
- Annealing and cutting machines for wire rope 3-60 mm
- Mobile rolling machines for wire rope 2, 5-28 mm
- Casting platform with a height of 3 m. Casting possible for rope diameters up to approx. 90 mm
- Winding machines for spooling of wire ropes up to a weight of 8 tons

View Complete Details

CondorGrip Universal Lifting

For lifting, turning (180) and transport of steel sheets, steel constructions and standard profiles
All-purpose grabs with a load capacity of up to 2.0 t are equipped with a round link chain; grabs with a higher load capacity are equipped with flyer chains.
Versatile use and easy handling
Automatic slip guard, even with slack in the traction mechanism
Return bearing can be independently adjusted, ensuring the retention force and safety for longer
Permissible minimum load 10% of the load capacityWLL
For transport goods with surface hardness up to 30 HRC
(965 Nmm)
View Complete Details

Lifting Clamp Type CGUK

The next generation of lifting clamps. The new lifting clamp made in Germany represents ultimate quality. The CondorGrip CGUK universal clamp is an innovative development for horizontal and vertical transportation. The lifting clamp impresses with its unique, patent-pending design, which enables optimum safety in all pull directions.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Carl Stahl (Carl Stahl)
  • Dubai, United Arab Emirates
  • Share us via