Our Products
Specification of Expanded Metal Mesh |
||||||
Sheet Thickness |
Opening in Width |
Opening in Length |
Stem |
Roll Width |
Roll Length |
Weight |
0.5 |
2.5 |
4.5 |
0.5 |
0.5 |
1 |
1.8 |
0.5 |
10 |
25 |
0.5 |
0.6 |
2 |
0.73 |
0.6 |
10 |
25 |
1 |
0.6 |
2 |
1 |
0.8 |
10 |
25 |
1 |
0.6 |
2 |
1.25 |
1 |
10 |
25 |
1.1 |
0.6 |
2 |
1.77 |
1 |
15 |
40 |
1.5 |
2 |
4 |
1.85 |
|
||||||
|
The following list contains specification references for products we can offer. DANA Steel UAE is one of the largest stockiest & supplier of Aluzinc coils/sheets.With its dedicated coil service centres in Dubai & Ajman, we are able to supply in coils/sheets/slits and perforated patterns.
Other Reference Standards are also included for your reference.
Applications :
Aluminium-zinc coating :
The composition of the coating is 55% aluminum, 43.4 % zinc and 1.6 % silicon. The coating is also applied by means of a continuous hot dip galvanizing process. Aluzinc-zinc coating offer an excellent corrosion resistance resultant from the barrier effect of the aluminum on the surface and the sacrificial protection of zinc.
Applications :
Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot-dip Process.
Type | Applicable Standards | Other Reference Standards |
---|---|---|
Quality Designations | ASTM A792 | |
Coating Designations | ASTM A792 | EN10215 |
Base Metal
Chemical composition |
ASTM A792 | |
Mechanical Properties | ASTM A792 | EN10215 |
Dimensional Tolerances | ASTM A792 | EN10215 |
Surface Quality &
Treatment |
ASTM A792 | EN10215 |
Coating Bend Test | ASTM A792 | EN10215 |
Suggested Minimum Inside Radii for Cold Bending |
ASTM A792 | |
Other Tolerances | ASTM A792 | EN10215 |
Conversion Factor b/w Coating Weight and Thickness |
ASTM A792 |
Alloy No.:1100
1050 1060 1070 1230 3003 3004 3005 3104 3105 5005 5052 5754 5083
Hot dipped galvanized steel is produced by passing cold rolled steel through a molten bath of Zinc at temperatures around 460 C. The Zinc acts as a physical barrier between the atmosphere and the surface of the metal. Further, due to its lower chemical potential than iron, it is attacked and dissolved first, thereby offering superior corrosion resistance ( cathodic protection ).
DANA Steel UAE with its headquarters in Dubai, Manufacturing Facility(CRM Complex) at Dubai Industrial City . Our Continuous Galvanizing Line ( CGL) has the state-of-art Dual-Pot System which is capable of manufacturing Galvanized(GI) and Aluzinc(AZ) coils .It is also having online NOF technology along with Online SKIN PASS MILL ( SPM) and Tension Leveller(TL) to produce the highest quality of galvanized and aluzinc coils in various spangles(regular, minmized, zero) and zinc coatings(90gsm -350 gsm).
With its 4 coil service centers cum distribution centres in Dubai & Ajman is one of the most prominent manufacturer for galvanized coils(GI coils) in the middle east.Our service centers are equipped to handle coil weights upto 20 MT and can cut/slit sheets upto tolerances of +/- 0.50mm .In Addition to Cutting & Slitting facilities we also provide custom fabrication jobs ( profiling/cutting/bending/perforation) for our valuable customers.
Hot Dip Glavanized (GI ) Steel Coil / Sheet/ SlitsSpecifications of HD GI Coils / sheets/slits Manufactured by DANA STEEL
Galvanized steel can be identified by the crystallization pattern on the surface ( often referred to as spangle ). Regular, Minimal and Zero Spangle are the three types of surface finishes that are available.
GI has a wide variety of applications which include Roofing, Sidewall Partitions, False Ceilings, Decking, Steel Buildings, Automobile Components, Water Heater and Coolers, Furniture, Rolling Shutters, Sign Boards, HVAC Ducting and many more.
The following list contains specification references for products we can offer. Applicable Standards describe specification requirements our suppliers can meet. Other Reference Standards are included for your reference.
Type |
Applicable Standards |
Other Reference Standards |
Chemical composition |
ASTM A526 A527 A528 A642 A446(See Note 1) ASTM A653 |
BS2989 |
Mechanical Property |
ASTM A526 A527 A528 A642 A446(See Note 1) ASTM A653 EN10142/10147 JISG3302 |
BS2989 DIN17162 |
Coating weights |
ASTM A653 |
|
Coating bend tests |
ASTM A653 EN10142/10147 |
|
Thickness tolerances |
ASTM A653 JIS G3302 |
BS2989 DIN17162 |
Width tolerances |
ASTM A653 JIS G3302 |
BS2989 DIN17162 |
Length tolerances |
ASTM A653 JIS G3302 |
BS2989 DIN17162 |
Flatness tolerances |
ASTM A653 JIS G3302 |
|
Camber tolerances |
ASTM A653 JIS G3302 |
|
Out-of-square tolerances |
ASTM A653 |
|
Resquared tolerances |
ASTM A653 |
Type of
Coating |
Coating Designation (Both Sides) | Minimum
Coating
Weight(g/m²) |
ASTM BS2989 DIN 17162 JIS G 3302 |
||
Zinc |
G235 720 | |
G210 640 | ||
G600 600 Z60 600 | ||
G185 560 | ||
G165 500 | ||
G450 450 Z45 450 | ||
G140 430 | ||
G115 G350 350 Z35 350 | ||
300 | ||
G90 G275 275 Z27 275 | ||
Z25 250 | ||
Z22 220 | ||
G200 200 Z20 200 | ||
G60 Z18 180 | ||
150 | ||
G40 Z12 120 | ||
G100 100 Z10 100 | ||
90 | ||
Z08 80 | ||
(Z06) 60 | ||
40 | ||
G01 001 |
Hot rolling is a metal working process where large pieces of metal, such as slabs or billets, are heated above their temperature and thendeformed between rollers to form thinner cross sections. Hot rolled products (commonly known as black steel) generally weld, bend, drill and form very easily and are the least expensive of steels.
Rail tracks, storage tanks, storage bins, tubes
& pipes, high-pressure gas cylinders, oil well
pipes, pipelines, bearing plates for buildings,
boilers, ship construction and other structural
applications.
EN 10025 – 90 + A1- 93 | ITALIA UNI 7070 | GERMANIA G.B. 4360 SPAGNA UNE 36080
DIN 17100 |
FRANCIA AFNOR NF
A 35.501 |
S 185 | Fe 320 | St 33 | A 33 |
S 235 JR | Fe 360 B | St 37 – 2 | E 24 – 2 |
S 235 JO | Fe 360 C | St 37 – 3U | E 24 – 3 |
S 235 J2 G4 | |||
S 275 JR | Fe 430 B | St 44 – 2 | E 28 – 2 |
S 275 J0 | Fe 430 C | St 44 – 3U | E 28 – 3 |
S 275 J2 G3 | Fe 430 D | St 44 – 3N | E 28 – 4 |
S 275 J2 G4 | |||
S 355 JR | Fe 510 B | E 36 – 2 | |
S 355 JO | Fe 510 C | St 52 – 3U | E 36 – 3 |
S 355 J2 G3 | Fe 510 D | St 52 – 3N | |
S 355 J2 G4 | |||
S 355 K2 G3 | Fe 510 DD | E 36 – 4 | |
S 355 K2 G4 |
G.B. 4360 | SPAGNA UNE 36080 | CHINESE
STANDARDS |
USA ASTM |
A 310 – 0 | Q 195 | ||
40 A | Q 235 A C | A 283 Gr C / B | |
40 C | AE 235 C | Q 235 C | |
43 B | AE 275 B | Q 255 A | A 36 / A 283 D |
43 C | AE 275 C | ||
43 D | AE 275 D | Q 275 | A 633 Gr A |
50 B | AE 355 B | A 572 Gr 50 / A 678 Gr A | |
50 C | AE 355 C | ||
50 D | AE 355 D | ||
50 DD |
Appearence | Visual | B& C |
Color | ASTM D 1500 | 1.5 |
Specific Density @ 15 C | ASTM D 4052 | 0.8733 |
Kinematic Viscosity @ 40 C | ASTM D 445 | 21.28 |
Kinematic Viscosity @ 100 C | ASTM D 445 | 4.26 |
Viscosity Index | ASTM D 2270 | 103 |
Flash Point Pour Point |
ASTM D 92 ASTM D 97 |
202 -3 |