Post Buy Requirement
DK
United Arab Emirates
Add Review

Petrochemicals & Petroleum Products #2924892

Rubber Process Oil

rubber processing oil is formulated from high-quality base oils blended with a balanced mixture of additives. It is mainly used during the processing and production of rubber compounds.

the range of dkptc rubber process oil isclassified into three groups:-

aromatictypes

is fully rich aromatic by-product form solvent extracting process to modify physical properties of the vulcanization and to reduce the cost of the finished product.

paraffinictypes

paraffinic type comes into the class of hydrocarbons which constitutes of branched chain or straight linked hydrocarbons molecules of many viscosities.

naphthenic types

is a class of hydrocarbons also referred to as ( cycloparaffins) . Their unique colour stability, solubility and good thermal stability make them ideal for moulded articles, footwear, lpg tubes, hot water bags, floor tiles, moulded & extruded products.

in addition to the above three type, we also offer you a range of non-carcinogenic low pca (polycyclic aromatics) oils which meet the eu regulations. This range includes of treated distillate aromatic extract (tdae), distillate aromatic extract (dae), treated residual aromatic extract (trae), residual aromatic extract (rae) and mild extracted solvent (mes).

the blend of heavy paraffinic oils comes in (mes) category and the aromatic extract is in (rae) while both types contain polycyclic aromatics content and are less than 3% as required by eu regulations.

View Complete Details

Gilsonite

Gilsonite is a natural Asphaltum, resinous hydrocarbon. This natural asphalt is similar to a hard petroleum asphalt and is often called a natural asphalt, asphaltite, uintaite, or asphaltum. Gilsonite is soluble in aromatic and aliphatic solvents, as well as petroleum asphalt. Due to its unique compatibility, gilsonite is frequently used to harden softer petroleum products.

Lump Form:

1- Gilsonite with ash content up to 5%, moisture up to 2%2- Gilsonite with ash content up to 10%, moisture up to 2%3- Gilsonite with ash content up to 15%, moisture up to 2%

Powder form:

1- Gilsonite with ash content up to 5%, moisture up to 2% meshes 30, 40, 100, and 1502- Gilsonite with ash content up to 10%, moisture up to 2% meshes 30, 40, 100, and 1503- Gilsonite with ash content up to 15%, moisture up to 2% meshes 30, 40, 100, and 150

View Complete Details

Bitumen

Asphalt also known as bitumen is a sticky, black and highly viscous liquid or semi-solid form of petroleum. It may be found in natural deposits or may be a refined product; it is a substance classed as a pitch. The primary use (70%) of asphalt/bitumen is in road construction, where it is used as the glue or binder mixed with aggregate particles to create asphalt concrete. Its other main uses are for bituminous waterproofing products, including the production of roofing felt and for sealing flat roofs.

The terms asphalt and bitumen are often used interchangeably to mean both natural and manufactured forms of the substance., asphalt (or asphalt cement) is the carefully refined residue from the distillation process of selected crude oils. Outside the United States, the product is often called bitumen. Geological terminology often prefers the term bitumen. Common usage often refers to various forms of asphalt/bitumen as "tar", such as at the La Brea Tar Pits. Another term, mostly archaic, refers to asphalt/bitumen as "pitch".

Naturally occurring asphalt/bitumen is sometimes specified by the term "crude bitumen". Its viscosity is similar to that of cold molasses while the material obtained from the fractional distillation of crude oil [boiling at 525 C (977 F) is sometimes referred to as "refined bitumen".

View Complete Details

Foots Oil

Residue Wax is also popularly known as "Foot Oil " a residue of the finished product after the manufacturing of paraffin wax or its related products.

Foots Oil can be used as hydrophobia impregnation material, fuel brick component, raw material for the production of grease lubricants, conservation oils, and lubricants.

Uses/Applications

  • Textile Industry
  • Leather Industry
  • Rubber Industry
  • Petrochemical Industry
View Complete Details

Sepahan Rubber Process Oil

  • Flash Point 240
  • Supply Ability 20000 Metric Ton/Metric Tons per Month
  • Port Jebel Ali Port
  • Model Number RPO-SP145
  • Packaging Details Packing In New Steel Drums (205kg) In Flexi Tank (20mt per flexi ) Shipment In 20ft containers with 16.5 M/T IN 80 DRUMS
  • Pour Point +27
  • Aniline Point 30-40
  • Place of Origin United Arab Emirates
  • Color Green

CHARACTERISTIC RESULT TEST METHOD
Kinematic Viscosity @100 °C 30-40 ASTM-D445
Flashpoint °C min 240 ASTM-D92
Aniline Point °C 30-40 ASTM-D611
Pour Point °C max +27 ASTM-D97
Density @ 15.6 °C (g/cm³) typical) 1.02 ASTM-D4052
VGC typical 0.97 ASTM-D2501
View Complete Details

Oxidized Bitumen

  • Flash Point °C 225 min
  • Packaging Details In New Steel drums ( 180kg) (150kg) In 20ft container contains of 110 drums
  • Supply Ability 20000 Metric Ton/Metric Tons per Month
  • Softening Point °C 110-120
  • Place of Origin United Arab Emirates
  • Penetration 10-20

Index Standard                               Oxidized Bitumen Grade
115/15 105/35 95/25 85/40 85/25 75/30
Softening Point Temperature (̊C) ASTM D36 115±5 105±5 95±5 85±5 85±5 75±5
Penetration at 25 C (dmm) ASTM D5 15±5 35±5 25±5 40±5 25±5 30±5
Thermal Loss Percentage ASTM D1754 0.2 0.5 0.2 0.5 0.2 0.2
Solubility in trichloroethylene ASTM D2042 99.5 99.5 99.5 99.5 99.5 99.5
View Complete Details

Cutback Bitumen

  • Type Petroleum Asphalt
  • Flash point 66
  • Softening Point N/M
  • Model Number CB-MC250
  • Port JEBEL ALI PORT
  • Place of Origin United Arab Emirates
  • Grade Bitumen MC250
  • Supply Ability 20000 Metric Ton/Metric Tons per Month

PROPERTY MIN MAX TEST METHOD
Kinematic Viscosity at 60 ° C mm2/s 250 500 ASTM -D2170
Flash point {Tag open-cup),°C 66 - ASTM -D3143
Distillate Test: Distillate test, volume percent of total distillate to 360°C:
To 225 ° C - 10 ASTM -D402
To 260° C 15 55 ASTM -D402
To 316 ° C 60 87 ASTM -D402
Residue from distillation to 360 ° C:      
Percent volume by difference 67 - ASTM -D402
Test on residue from distillation: 67 - ASTM -D402
Viscosity at 60 °C 30 120 ASTM -D2170
Penetration at 25 °C 120 250 ASTM -D5
Ductility at 25 °C 100 - ASTM -D113
Solubility in trichloroethylene,% 99 - ASTM -D2042
Water ,% - 0.2 ASTM -D95
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us