Post Buy Requirement
DC
FUJAIRAH, UAE, United Arab Emirates
Add Review

Our Products

  1. Testing Equipments 9 Products available
  2. Cleaning Chemicals 15 Products available
  3. Air Cleaner Parts 3 Products available
  4. Floor Cleaner 3 Products available
  5. Others 65 Products available

Other Products / Services

Carbon Remover

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Clear liquid
  • DENSITY In g/cm3 at 15°C: 1.06
  • Metal No known effect
  • Rubber May Swell
  • Synthetic rubber May Swell
We offer carbon remover
product description:
rxsol-16-1003 is a unique formulation of wetting emulsifying agent along with powerful surfactants and organic solvents. It does not contain any chlorinated solvents of phenols & has less than 10% aromatics & surfactants in the product do not contain any alkyl phenol ethoxylates.

product uses:
1.rxsol-16-1003 is a fully active cleaner specially formulated for the removal of carbon& tuff oily stains residues.
2.carbon cleaning is active without the need for scrubbing or brushing which can cause mechanical damages to discs and result in poor performance. 3.field test have shown that rxsol-16-1003 is very gentle with personnel and on metallic color surface.
rxsol-16-1003 should always be used at full strength to obtain maximum benefits.

product-application:
directions for use and dose rates

soak method:
the apparatusparts for cleaning are dipped through the rxsol-16-1003.immersion time will depend up on the nature of the deposited particle. The components should be rinsed thoroughly before handling.

dose:
either concentrate or dilute 1 part concentrate to 2-5 part water to yield a very effective end product then components and machine parts are dipped into the solvent solution for 30 min. To 1-hour while for heavy deposition may need 12-24 hour.

note :
low evaporation prevents loss of chemical cleaning of heat exchangers(oil part)
1. Drain the system off any remaining oil.
2. Arrange the system for re circulation with active rxsol-16-1003 heat the soln. Up to 50.if heating is not available, the cleaning time will need to be extended.
3. Circulate for 12-15 hours. When the cleaning is complete drain the system.
4. Connect high pressure fresh water supply to the upper heat exchanger connection. Rinse until water runs clear
5. Disconnect, drain and dry the system.

Additional Information:

Packaging Details : 25 Ltr, 210 Ltr

Delivery Time : Any Time

View Complete Details

Carbon Remover Lt

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • APPEARANCE Pale yellow liquid
  • DENSITY, in g/cm3 at 15°C 1.0
  • pH, in conc. N/A
  • Metal No known effect
  • Rubber May swell
  • Synthetic rubber May swell
We are offering carbon remover lt.
Product description
carbon remover lt is a non-corrosive, powerful solvent for removal of carbonaceous deposits. Carbon remover lt contains no chlorinated solvents or phenolic compounds and has low toxicity to the environment and to persons handling it.
directions for use and dose rates

submerged method
this is an effective way of cleaning deposits from machine parts. The items to be cleaned are dipped into the solvent. A wire basket can be used for small components. For removal of light deposits or oil, a dilution of up to 1:2 in fresh water can be used. Light deposits will be removed in 1 hour, whereas heavily oxidized deposits may need overnight soaking. After the components have been removed from the soaking bath, remaining solvent is easily flushed off with water. Due to a very low evaporation rate, no precautions are necessary to prevent loss of liquid, but adequate ventilation is recommended. Cleaning the oil side of heat exchangers where in-situ cleaning is required, carbon remover lt can be used neat and circulated through the unit in question. Time required for this process will again depend on extent of fouling and may take up to 24 hours. Recommended to be used .
1. Disconnect the heat exchanger's oil inlet and outlet, drain off any remaining oil.
2. Connect the discharge side of the chemical cleaning unit (ccu) to the lower heat exchanger connection and fit the return to the ccu.
3. Add carbon remover lt to the drum and heat, maintaining the temperature (max 60c), throughout the cleaning operation. If heat is not available the cleaning time will need to be extended.
4. Circulate for 12 hours. When the cleaning is complete, disconnect the lower heat exchange connection.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Degreaser Hd

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Clear brown liquid
  • Density In g/cm3 at 15°C
  • Brand Name RXSOL
  • FLASH POINT °C Above 65
  • Metal No known effect
  • Rubber May swell
  • Synthetic rubber May swell
We are offering degreaser hd.
Heavy duty degreaser (oil- grease- remover)

introduction:
rxsol-10-1005 is a unique formulation blended from inorganic, organic compound and solvent with powerful dispersing agent .readily soluble in water in all proportions.rxsol-10-1005 is non- corrosive to metal like copper, aluminum, mild steel, and plastic. It is non toxic which makes handling easy. Functions complete removal of dirt, oil, carbonized grease, heavy oil, gum , vegetable oil , lube oil, soot , asphalt , carbon stains etc. Gives clear finish to the surface.

procedure of use:
1st method : mix 1 part of rxsol-10-1005 with 2 -10 parts of water gas-oil , for heavy oil, greasy surface use directly)spray directly on the entire surface to be cleaned. This can be achieved by hand spraymechanical spray pump.
Immediately after 2 -5 minute of spray the rxsol-10-1005 starts its function. The dirt, oil grease etc will loosen. 5 to 6 minutes after spraying start rinsing the system with water (high pressure recommended). Dirt and mud starts vanishing with cleaning media and water.

2nd method: application in immersion process with or without ultrasonic support, manual wiping. 3rd method: rxsol-10-1005 is also used in conjunction with alkaline degreasing bath at 3-5% (vv) concentration for better and quick degreasing action. Eithers the bath is heated to be 70c or the solution can be stirred or air agitated.
Advantages: rxsol-10-1005 is easily soluble in water action is quite fast even at low temperature which gives advantages of cleaning under operation and avoid shut down and down time. Non corrosive to most of the metals plastics. Gives clear finish to the surface. Lower cost due to high concentration fields of.

Additional Information:

Packaging Details : 25 Ltr, 210 Ltr

Delivery Time : Any Time

View Complete Details

Degreaser Sb

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Compatible with oily water separators.
  • Density Eliminates the need to buy & stock duplicate products because of its effectiveness.
  • Brand Name RXSOL
  • Metal Rubber Also used for gas and hydrocarbon freeing of tanks. Free from caustic & hydrocarbon , Non flammable Water based , Biodegradable .Safe to metal
  • pH Neat 12
We are offering degreaser sb.
Water-based degreaser for general purpose rxsol-10-1006

product introduction: rxsol-10-1006 mixture of emulsifier, new technology surfactants (with high solvency and emulsification effect), corrosion inhibitors, rust preventive. Due to free from caustic and hydrocarbon very gentle on hands & ideal for cleaning walls wood works, metals and all areas .
Acts as superior quality cleaner degreaser.bio degradable

fields: rxsol-10-1006 containing corrosion inhibitors to prevents the corrosion of metals such as aluminum, copper, brass and tin.rxsol-10-1006 is designed to clean animal vegetables oils, fats, hydrocarbon removes dirt, link, carbonized grease, oil, heavy oils etc. Specialized for all types of cleaning and degreasing. May be applied by brush , hand spray or used in ultrasonic cleaning tanks, immersion soak tanks and high and low pressure spray appliances. May be used neat or diluted by up to 50 parts of water according to the amount and type of soil to be removed.
Tank cleaning (cargo tank cleaning after mineral, animal, vegetable and fish oil.)
method of application and doses: 1st of all by stripping suction removes all possible oil (greasy materials)to prevents evaporation of lighter fraction oil flush the system with cold water. May be brushed on, sprayed (hand spray direct injection) recalculate the system with rxsol-10-1006 solution.

1. Cleaning with washing machines. Dose rate: 0.3 - 5 ltr per ton wash water (0.03-0.5%)
2. Cleaning with recirculation method.
3. Dose rate: 0.5-10 ltr per ton wash water, (0.05-1%).
4. Spot cleaning. Hand sprayed neat or diluted up to1-10 parts water and left for about 15-20 minutes before washing.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr, 210 Ltr

Delivery Time : Any Time

View Complete Details

Disc Cleaner

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Brand Name RXSOL
We are offering disc cleaner.
Disc cleaner-i (rxsol-16-1007)

introduction:-
rxsol-16-1007 is a liquid blend of organic solvent with heavy duty & concentrated emulsifying agents. An extremely effective for removal of burnt grease, carbon deposit, oily residues and lacquers found in fuel oil and lube oil purifiers and filters

fields:-
a very fast & effectively removes without the need of scrubbing and brushing of centrifugal separators, disc & all types of heavy tenacious deposits which collect in fuel & lube oils centrifugal separators disc stacks.

note:- mechanical cleaning (scrubbing and brushing ) damage to discs which results in poor performance.
Procedure:- should be diluted, at the rate of 1-parts rxsol-16-1007 to 5-parts water, ( or 1:1 ratio of any solvent like diesel ) before use or depend on nature of dirt contamination rxsol-16-1007 may be used directly. At 50 to 60c for best result apply higher concentration for 15 min. To 3 hours. After the unit or parts have been satisfactorily cleaned, they should be rinsed thoroughly with fresh water. It is recommended that this product is not used on soft metal, zinc, tin, galvanized surfaces or anodized aluminum.

note: -
recirculation and heating will improves the cleaning action.

characteristics:-
1. Formulated to remove heavy tenacious deposits.
2. Allows cleaning of discs without dismantling of disc stacks.
3. Reduces downtime.
4. Improves efficiency of centrifuge installation.
5. Cleans down to metal surfaces.
6. Cleans all types of separator discs.

Additional Information:

Packaging Details : 25 Ltr, 210 Ltr

Delivery Time : Any Time

View Complete Details

Descaling Liquid

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Clear liquid
  • Density In g/cm3 at 15°C: 1.2
  • Brand Name RXSOL
  • pH (Neat) <1.5
  • Metal Contains corrosion inhibitor
  • Rubber No known effect
  • Synthetic Rubber May swell
We are offering ultersonic cleaner.
Liquid acid for removal of scale and rust deposit product description: special grade cleaner also compatible on aluminum, zinc, tin, or any galvanized surfaces rxsol-11-1008 is a liquid superior, heavy duty, concentrated acid solution containing accelerators, corrosion-inhibitors & wetting agents. Specifically formulated to remove rust and water scale build-up from boilers, evaporators, heat exchangers, cooling systems, pipeline collection systems etc. Very effective results when is applied.
Fields: boilers , clarifiers , heat exchangers , diesel engine cooling system , condensers , evaporators , & other types of equipment where rust & scale forms and very compatible with soft metals.
Directions for use and dose rates: the most effective method is circulation for large systems or components like boilers, evaporators, condensers, heat exchangers and generally closed systems that have the capability to circulate at a temperature of approximately 40-60c, for 6-12 hours and solutions of 10-40% of rxsol-11-1008 in water. Keep in mind that the strength of the solution is analogous to the degree of deposition of scale. In case of small components, the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease, sludge or carbonized oil, then first of all clean the system with degreaser rxsol ob 1005.rxsol-11-1008 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling. After using rxsol-11-1008 it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of alkalinity control in fresh water.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Electrosol Plus

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Clear Colorless Liquid
  • Brand Name RXSOL
  • Flash Point 63°C (Closed Cup)
  • Metal No known effect
  • Plastic No Known effect
  • Rubber May swell
We are offering Electrosol Plus.
Excellent Cleaner for Electric Parts

ELECTROSOL Plus Kgs(RXSOL-16-1009)

Introduction :
A well balanced blend of non-chlorinated degreaser ( Having super Degreasing power ) with surfactants which eliminates Quick evaporation rate and resulting for Cleaning and Degreasing of electrical equipment. It provides immediate and efficient removal with a high evaporation rate.

Procedure of Use:
RXSOL-16-1009 must be used in open or sufficiently ventilated areas. RXSOL-16-1009-Kshould always be used concentrate (without mixing with other solvent.) For best results apply with either by brush, swab, or as a fine spray using suitable hand held spray equipment. Small components may be cleaned by brief immersion in a bath of RXSOL-16-1009-K. Never use RXSOL-16-1009-K on a running generator or motor. RXSOL-16-1009-K can be used to clean virtually all electrical equipment & components although is it possible it may affect some types of rubber & plastic . Either remove rubber & plastic parts from component or test on small area for any reaction before cleaning.

Characteristics:
1. High dissolving and penetration action.
2. Excellent degreasing and emulsification power.
3. Safe on applied electrical insulation.
4. Non-corrosive .It is safe to use on painted or varnished metal surfaces.
5. Without chlorinated solvents.
6. To be used as an alternative to conventional electric cleaners.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Electrosol Qd

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Brand Name RXSOL
  • Appearance Clear Colorless Liquid
  • Flash Point 63°C (Closed Cup)
  • Metal No known effect
  • Plastic No known effect
  • Rubber May Swell
We are offering electrosol qd.
Introduction:-
a well balanced blend of non-chlorinated degreaser ( having super degreasing power ) with surfactants which eliminates quick evaporation rate and resulting for cleaning and degreasing of electrical equipment. It provides immediate and efficient removal with a high evaporation rate.

procedure of use:-
rxsol-16-1009 must be used in open or sufficiently ventilated areas.rxsol-16-1009 should always be used concentrate (without mixing with other solvent.) for best results apply with either by brush, swab, or as a fine spray using suitable hand held spray equipment. Small components may be cleaned by brief immersion in a bath of rxsol-16-1009. Never use rxsol-16-1009 on a running generator or motor.rxsol-16-1009 can be used to clean virtually all electrical equipment & components although is it possible it may affect some types of rubber & plastic. Either remove rubber & plastic parts from component or test on small area for any reaction before cleaning.

characteristics
1. High dissolving and penetration action.
2. Excellent degreasing and emulsification power .
3. Safe on applied electrical insulation.
4. Non-corrosive .it is safe to use on painted or varnished metal surfaces.
5. Without chlorinated solvents.
6. To be used as an alternative to conventional electric cleaners.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Metal Brite

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Colorless liquid
  • Density g/cm3 at 15°C: 1.2
  • Brand Name RXSOL
  • pH 10% solution 1.5-2.5
  • Compatibility Metal Concentrate and long touch may corrode.
  • Rubber No known effect
We are offering metal brite.
Procedure for use:-rxsol-16-1011 is highly concentratedilute in water (always use plastic jar and rxsol-16-1011-210 should be added to water never add water to rxsol-16-1011.) surface should be sound clean and free from oil, grease, dirt etc. Diluted materials apply on rusted area for 15 to 20 minutes then wash off with water repeat if necessary. (for stubborn rusted stains.)
note:- for steel surfaces; remove oil, grease and old paint. Wet down entire surface with neat metal bright- rx and allow to dry.second wash may be necessary. Surface should have a greywhite appearance when the metal bright- rx is dry. Steel surfaces will have a resistance to rust and will render a good base for paint. For removal of rust stains on painted surfaces and wood, metal bright rx should be applied at full concentration for heavy stains, or diluted to 20-50% for light stains. Allow to soak for 15 to 30 minutes and wash off with water. A second application may be necessary to remove the stubborn stains.
Spraying direction: using an empty clean 210 liter drum, fill with 190 liter of fresh water and add 20 liters of metal bright rx this makes a 10% solution, which can be sprayed onto areas in coated tanks where rust stains are showing and over actual rusted areas. Once spraying is completed, wait 20-30 minutes and fresh water rinse with lots of water, if possible use butterworth machines for a more efficient result. This method can be used in stainless tanks to freshen up the look of the stainless materials. Make sure to rinse the tank very well, as residual detergent within the metal bright rx will show up in a wall wash.
Injection not suitable.

Additional Information:

Packaging Details : 25 Ltr, 210 Ltr

Delivery Time : Any Time

View Complete Details

Penetrosol

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Brand Name Rxsol
We are offering penetrosol.
Description: a very strong cleaner, which can be used to soften up remove baked on drying oils and hard coke asphaltic deposition etc. It is low toxic product with an exceptional solvency power on soil & oily matter . It is minimizes the extreme hazards to personnel in handling materials.

using procedure :-
the most economical method of using rxsol penetrosol is by direct injection followed by recirculation washing, using tank cleaning machines.

spraying method :-
using penetrososl as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), and warm water 60oc for at least 3 hours **make sure to take all safety precautions are followed when handling spraying penetrososl **
injection method: not applicable.

re-circulation method :
if there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material. use a strainer at the pump stack when circulating any solution.
Surface lining stainless epoxy phenolic

characteristics:- 1. Removes grease, oil, carbon deposits, soil and grime.
2. Keeps loosened deposits in suspension preventing re-deposition.
3. Low toxic., non-flammable.
4. Free from hydrocarbon solvents.
5. Effective and economical in use, water-based cleaner.
Rxsol penetrososl has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits and general dirt and grime.
1. Non-corrosive to ferrous metals. Suitable for all tank-coatings.
2. Can be used for gas and hydrocarbon freeing of tanks.
3. Can be used for deodorizing
4. Contains wetting agents.

note: acts as an acid-neutralizing agent.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Rig Wash

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Pale yellow clear liquid
  • Density In g/cm3 at 15°C: 1.0 +/- 0.05
  • Brand Name RXSOL
  • Metal May attack Zinc at concentrated solutions
  • Rubber No known effect
  • pH Neat 7.5 to 8.5
We are offering rig wash.
Product introduction:rxsol-16-1042 mixture of emulsifier, new technology surfactants (with high solvency and emulsification effect), corrosion inhibitors, rust preventive. Due to free from caustic and hydrocarbon very gentle on hands & ideal for cleaning walls wood works, metals and all areas . Acts as superior quality cleaner degreaser. Bio degradable
fields:rxsol-16-1042 containing corrosion inhibitors to prevents the corrosion of metals such as aluminum, copper, brass and tin. Rxsol-16-1042 is designed to clean animal vegetables oils, fats, hydrocarbon removes dirt, link, carbonized grease, oil, heavy oils etc. Specialized for all types of cleaning and degreasing. May be applied by brush, hand spray or used in ultrasonic cleaning tanks, immersion soak tanks and high and low pressure spray appliances. May be used neat or diluted by up to 50 parts of water according to the amount and type of soil to be removed.tank cleaning(cargo tank cleaning after mineral, animal, vegetable and fish oil.)
method of application and doses :
1st of all by stripping suction removes all possible oil (greasy materials). To prevents evaporation of lighter fraction oil flush the system with cold water. May be brushed on, sprayed (hand spraydirect injection) recalculate the system with rxsol-16-1042 solution. Cleaning with washing machines. Dose rate: 0.3-5 liters per ton wash water (0.03-0.5%).
1. Cleaning with recirculation method. Dose rate: 0.5-10 liters per ton wash water (0.05-1%).
2. Spot cleaning. Hand sprayed neat or diluted up to 1-10 parts water and left for about 15-20 minutes before .washing. Off
rxsol-16-1042 has numerous general cleaning applications including the removal of greases, oil, sludge, carbon deposits, general dirt and grime. Can be used as engine room cleaner. Suitable for cargo tank cleaning. Can be used as accommodation cleaner for bulkheads, decks, toilets. Suitable for cleaning of soiled textiles as rugs, covers, mats, overalls, etc.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

T Pol

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Pale yellow liquid
  • Density In g/cm3 at 15°C: 1.01
  • Brand Name RXSOL
  • Metal No known effect
  • Rubber No known effect
  • pH Alkaline
We are offering t pol.
Product description:
rxsol-12-t-300 is a superior & powerful alkaline cleaner containing corrosion inhibitors to prevents the corrosion of metals . It is low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from hydrocarbon solvents , biodegradable and minimizes the extreme hazards to personnel in handling materials

applications:
rxsol-12-t-300 suitable for cleaning engine components like fuel and lube oil filters, injection nozzles, pump components, inlet and exhaust valves & primarily refers to cleaning of hard surfaces, such as decks, tanks, engine rooms, etc. Can be used for all types of cleaning and degreasing and may be applied by brush, hand spray, high and low pres -sure washing machines etc.
And stirring. Each grease globule thus separated in pin cushioned by hydrocarbon tails with (-ve) heads out wards in water. The (-ve) head globules keep apart by mutual repulsions & are said to have emulsified. The emulsified grease globules bearing dirt can be readily washed with water. Characteristic: ( why rxsol-12-t-300, is better than soap) 1. The rxsol-12-t-300 are superior to soaps because they do not form insoluble salts ca+, mg+, & fe+, ions as soaps do. For e.g :- 2rcoona+ +mgso4 (rcoo)2 mg+ + na2so4 soaps insoluble 2r so3na+ + mgso4[ r so3]2mg+ +na2so4 organic syndet soluble hence rxsol-12-t-300 , can be used in either soft water or hard water, while ordinary soaps are precipitated in hard water and go waste.
2. Rxsol-12-t-300, have a long non-polar hydrocarbon chain and a highly polar group at the end of the molecule. Thus they have cleaning power , as better than ordinary soap.
3. Ordinary soaps were not readily bio-degradable, in other words, they
4. Were not broken down by bacteria in the sewage treatment plants. They caused water pollution while rxsol-12-t-300, are biodegradable , so there is no question of water pollution.

Additional Information:

Packaging Details : 10 Ltr, 20 Ltr, 25 Ltr, 210 Ltr

Delivery Time : Any Time

View Complete Details

Rxsol Turbo Cleaner Dry

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Brand Name RXSOL
We are offering rxsol turbo cleaner dry.
Rxsol turbo cleaner dry is blown by compressed air into the exhaust pipes before the turbocharger. This method of cleaning should be employed every 24 -48 hours of full-load operation. The interval between cleaning operations depends on the degree of contamination and on the increase in exhaust gas temperature after the turbine. Cleaning must be repeated if the gas temperature after the turbine on full load rises to 20c (20 k) above the mean temperature. For a turbocharger with several gas inlets, the inlets should be cleaned one after the other. On engines with several turbochargers, these should be cleaned one after the other. The gas inlet temperature before the turbine must not exceed 580-590c (853-863 k) in order to prevent severe burning of the rxsol turbo cleaner dry before the turbine. Since it is not possible to remove thick coatings with relatively small quantities of rxsol turbo cleaner dry, this method must be used more frequently. Injection of the rxsol turbo cleaner dry into the turbine is best performed at high turbocharger speed, to ensure efficient mechanical cleaning.

applications
instead of water, dry solid bodies in the form of granules like rxsol turbo cleaner dry are used for cleaning. A certain quantity of them, depending on the turbocharger size, is blown by compressed air into the exhaust gas lines before the gas inlet casing on account of their hardness and composition (natural solid granules, size 1.3-1.7 mm.) rxsol turbo cleaner dry have an excellent mechanical cleaning effect (soft blast). As a rule, a turbine should be cleaned every 24 to 48 hours of operation.

Additional Information:

Packaging Details : 25 Kg

Delivery Time : Any time

View Complete Details

Tank Clean Hd

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Color Clear light brown liquid
  • Density In g/cm3 at 15°C: 0.99
  • Brand Name RXSOL
  • Flash Point (PMCC)°C: Above 62
  • Metal No known effect
  • Rubber May Swell
  • Synthetic Rubber May Swell
We are offering tank clean hd.
Tank cleaner and degreaser

rxsol-20-2001 (heavy duty - plus)
introduction (solvent based oil and grease remover ) highly concentrated solvent emulsifier, with powerful penetrating agent corrosion inhibitor and surfactants, rxsol-20-2001 is used as a tank cleaner or for general degreasing , cleaning and gas freeing for double bottom tanks, wing tanks, tank lines, fuel oil tanks, etc . Tank lining stainlesszincepoxyphenolic.
Using-procedure: this can be beneficial as part of the initial cleaning process after the carriage of lube oils and lube oil additives. As soon as the tank in question has been checked empty by the attending surveyor, rxsol-20-2001 plus should be sprayed over all surfaces which are safely reachable.

re-circulation: possibly the best result are achieved by re-circulating a solution of rxsol-20-2001 plus after the initial rough washing of the tank. A sufficient amount of fresh water to maintain good suction should be heated to 60 o c and approximately 420 liters of rxsol-20-2001 plus (2 drums) added for each 500 liters of fresh water. The temperature of the mixture can be increased depending upon the melting point if the product being cleaned. The solution should be circulated for at least 4 hours and the butterworth machines operated at maximum pressure in all areas of the tank throughout this process. If a number of tanks are to be circulated, then a substantial quantity of solution can be made so that transfers can be made without delay and any small amounts lost will not affect the operation. Normally following transfer to another tank, 100 liters rxsol-20-2001 plus is added for each 5000 liters of solution. This is called spiking
following the re-circulation process, the tank must be hot butter worsted 80-85o c for at least 6 hours.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Sea Cleaner

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Color Light brown liquid
  • Density In g/cm3 at 15°C: 0.9
  • Brand Name RXOSL
  • Flash Point Above 70 °C
We are offering sea cleaner.
Product description: it is a liquid blend of concentrated emulsifier . Specially formulated for cleaning of oily greasy surface of tanks
directions for use and dose rates: rxsol-20-2002 is specially formulated for cleaning double bottom, deep and wing tanks etc, used for fuel oils. It can also be used for local cleaning and degreasing of engine rooms and on deck.
Soak method: for heavy soil put parts into undiluted rxsol-20-2002, for general soiling use a solution of 10-30% rxsol-20-2002 in water. Parts should be soaked for at least 30 minutes before washing off with water.
Spraying method: use neat rxsol-20-2002 over all soiled areas. Allow 10-20 minutes for reaction, then rinse with high pressure water hose. Scrubbing will assist the cleaning operation for stubborn deposits.
1. First of all heat the remaining oil in tanks .
2. By stripping constantly. Flush the tank with sea water, close all suction and discharge valves.
3. 1st dose fill the tanks by to 1 liter rxsol-20-2002 per ton of water through pipe or manhole, for 75-80% of capacity of tank to be cleaned.
4. Then fill tank to 25% capacity with sea water, raise the temperature up to 60c maximum, and maintain this temperature for 24 hours.
5. Top up tank to 75-80% capacity with sea water, continue to heat for 48 to 72 hours.
6. Discharge and strip tank. Fill to 50-60% capacity with sea water and allow 2 hours rinsing time.
7. Discharge tank and strip, flushing tank with sea water for 2 hours, stripping continuously. When completed, inspect tank to ascertain if second cleaning is required. If so:
8. For completion add second dose of rxsol-20-2002, fill tank with sea water 75-80% capacity and raise the temperature to 60c maximum. Maintain this for 48 to 72 hours. And recalculate the solution.
9. Discharge and strip tank, flush with sea water, stripping continuously for 2 hours.
10. To gas-free, fill tank with sea water to overflow through vents and sounding pipes, discharge and strip completely.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Cold Wash Cleaner

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Brand Name RXSOL
  • Appearance Clear amber brown liquid
  • Density In g/cm3 at 15°C: 0.95
  • Flash Point Above 70°C ( on dilution with water more than 90°C )
  • Metal No known effect
  • Rubber May Swell
  • Synthetic rubber May Swell
We are offering cold wash cleaner.cold wash general(rxsol-10-2003) introduction: rxsol-10-2003-cw is a unique formulation blended with oxidized fatty compound and high flash point solvents( due to that can be used undiluted up to 70c) with powerful dispersing agent along with ionic and non ionic surfactant . Ob1005 is readily soluble in water in all proportions.rxsol-10-2003 is non- corrosive to metal like copper, aluminum, mild steel, and plastic. It is non toxic which makes handling easy.
Functions: complete removal of dirt, oil, carbonized grease, heavy oil, gum , vegetable oil , lube oil, soot , asphalt , paraffin, carbon stains etc. Gives clear finish to the surface. Highly effective for the removal of crude and other high melting point stains
proedure of use : 1st method ( spray method ):- mix 1 part of rxsol-10-2003-cw with 2 -10 parts of water gas-oil ( for heavy oil, greasy surface use directly)spray directly on the entire surface to be cleaned. This can be achieved by hand spray mechanical spray pump. Immediately after 2 -5 minted of spray the rxsol-10-2003-cw starts its function. The dirt, oil grease etc will loosen. 5 to 6 minutes after spraying start rinsing the system with water (high pressure recommended). Dirt and mud starts vanishing with cleaning media and water.
2nd method (immersion process ):-application in immersion process with or without ultrasonic support, manual wiping.
3rd method (re-circulation method ):-rxsol-10-2003-cw is also used in conjunction with alkaline degreasing bath at 2-10% (vv) concentration for better and quick degreasing action. Eithers the bath is heated
to be 70cor the solution can be stirred or air agitated. Finally rinse the system with fresh water.
Advantages : rxsol-10-2003 is easily soluble in water action is quite fast even at low temperature which gives advantages of cleaning under operation and avoid shut down and down time. On corrosive to most of the metals plastics.gives clear finish to the surface.lower cost due to high concentration

Additional Information:

Packaging Details : 20 Ltr , 25 Ltr

Delivery Time : Any Time

View Complete Details

Dye Remover (org Dichlor), Cleaning Chemicals

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
Description:
rxsol org dichlor mixture of emulsifier, new technology oxidizer, corrosion inhibitors, rust preventive. Due to free from caustic and hydrocarbon very gentle on hands & ideal for cleaning walls wood works, metals and all areas . Acts as superior quality cleaner degreaser.
**these products become more aggressive with temperature increase, and should not be allowed to dry on tank walls or stored in cargo tanks as cleaning solution or slops.
Bleach will . Remove odors. Remove color. Improve permanganate time.
Spraying following rough washing to a good water white or better, apply dilute rxsol org dichlor to 1 3% strength. First wet the tank surface (spray with di water), then spray all over with bleach, wait 30 minute (but do not allow to dry) and then rinse very well with di water, including the tank top towards the sump. To ensure that you have covered all areas properly, this process should be carried out at least twice with good di water. Injection no.
Re-circulation following rough washing to a good water white standard or better, apply dilute rxsol org dichlor to 1-3% strength. Mix sufficient rxsolorg-dichlor with fresh water in the tank and heat this mixture to 40 50 0 c, circulate through the drop line if fitted and than circulate through butterworth machine for 3 hours. After re-circulation immediately warm butterworth to (500 c) the tank for 3 hours at maximum pressure, increase the water temperature to 80-85 o c after 45 minutes.check (by smell) that there is no rxsolorg-dichlor remaining, then fresh water rinse and dry.
1.when there are a number of tanks requiring re-circulation, it may be significantly more efficient to
2.make up a large batch or number of batches that can be transferred on between tanks as required.
3.use a strainer at the pump stack when circulating any solution
4.tank lining stainless zinc epoxy phenolic (extreme care must be taken if product other than bleach substitute is to be used inany coated space.

Additional Information:

Packaging Details : 20 ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Edgesol

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Pale yellow liquid
  • Density In g/cm3 at 15°C: 1.21
  • Solubility Infinite in water
  • Brand Name RXSOL
  • Metal No known effect
  • Rubber No known effect
  • pH Alkaline
We are offering edgesol.
Product description:-
rxsol-16-3014 is a superior heavy duty and highly concentrated water based alkaline cleaner, containing specially selected detergents and powerful long chain organic syndet , specific salts with surfactants & wetting agents. It is low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from hydrocarbon solvents , biodegradable and minimizes the extreme hazards to personnel in handling materials . Also suitable for tank cleaning .it can be used as a general purpose cleaner to remove oil and grease deposits.

using procedure:-
first of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using rxsol-16-3014 is by direct injection followed by recirculation washing, using tank cleaning machines. Spraying method: directly spray on the contaminated area and let it act for 5-10 minutes. Then clean the system under high pressure. A solution of 5-10% in fresh water can be used for this purpose also , and may be sprayed on and hosed off using high pressure.
Circulation method :-cleaning the oil side of tank can be cleaned by circulating through with rxsol-16-3014.
Rock and roll method: - fill the tank with water (fresh or sea) up to 25 - 30% of its volume then 520% (depend on contamination) rxsol-16-3014 will add , let it stand for approximately 12-24 hours. Then fill with more water to 90% of the tank's capacity. This way the tank will be cleaned by natural agitation due to wave motion. Let for a few days, then drain the tank and ballast-de-ballast 2-3 times in order to achieve complete and thorough rinse off.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Inviro Cleaner

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Brand Name RXSOL
  • Appearance Orange liquid Orange liquid
  • Flash Point (PMCC)°C: None
  • Density: Compatibility In g/cm3 at 15°C: 1.0
  • Metal: Rubber No known effect
We are offering inviro cleaner.
Product description : a unique blend of emulsifier , penetrating agents , mild abrasives and wetting agent make this an excellent liquid scouring cleansers. Very effective for the control of cleaning and degreasing . All ingredients are bio-degradable and safe to the persons handling it. Pleasant citrus odor .scientifically advanced versatile cleaner can be used for tank or general cleaning
product uses: rxsol-20-300 may be used in all types of cleaning and degreasing operations and is very effective against oil , grease and many other difficult soils.
Application manual degreasing : may be applied neat or diluted with water up to 1 part to 15 20 parts by using a cloth , brush or spray. After use as an engine room cleaner, bilge slops must be allowed to separate for at least 3 hrs before passing through an oily water separator.
Tank & bilge cleaning: rxsol-20-300 is recommended for any of the standard tank cleaning methods including ship motion , pressure spray washing and recirculation method after mineral, animal, fish and vegetable oils.
Note : for hydrocarbon freeing after cleaning with hydrocarbon solvent cleaners like sea clean (rxsol -20-2002), tank clean (rxsol-20- 2001 ) and osd (rxsol od 1012) etc.
Versatile can be used for tank cleaning or general cleaning, rxsol-20-300 has numerous general marine cleaningreasing applications including the removal of greases, oil, sludge, polymer
compounds, carbon deposits, general dirt and grime .phase separation after cleaning, releasing the oil phase for reclamation.

Additional Information:

Packaging Details : 20 Lt, 25 Ltr,

Delivery Time : Any Time

View Complete Details

Rx Tuff Cleaner

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Orange liquid
  • Density In g/cm3 at 20°C: 1.06
  • Brand Name RXSOIL
  • Metal The conc. product may react with Aluminum, Zinc, Tin & their Alloys
  • Rubber No known effect
  • pH 13
We are offering rx tuff cleaner.product description:-
rxsol-20-3002 is a highly concentrate surfactant based cleaner for use as a tank cleaner or general degreasing. It contains wetting agents , penetrating agents & alkaline materials with heavy molecular surfactants.
Procedure-of-use: general-cleaning:- rxsol-20-3002 is suitable for tank and general cleaning and can be used for all types of cleaning & degreasing & may be applied by brush, hand spray, high & low pressure washing machines etc.

Tank cleaning: for removal of residues of minerals , animals , vegetable or fish oil,

waxes coal & soot from systems. Methods-of-application-and-dose rates:-
injection method for tank washing machines .dose rate 1-10 ltr. Per ton wash water 0.11%
circulation method. Dose rate 1-10 liters per ton wash water (0.1-1%).
Direct spot cleaning .hand spray concentrate or diluted with up to 5 parts water & leave for several minutes before rinsing off with clean water.

For cargo tanks to remove soot from systems:
1. Spray rxsol-20-3002 on with a high pressure cleaning machine and use1:6 with water. If used with hand sprayer, spray the product concentrate onto the surface, allowing 1 lit. For every 10-12 m2.use a 5-8% solution in a tank washing machine.
2. Leave for about 30-60 minutes. The surface should be kept wet.
3. Wash down with hot water (80c) and check the cargo tank.
4. Repeat the procedure if necessary.
Note: rx tuff is not suitable for use with aluminum, magnesium & zinc silicate coatings.

Characteristics:-
water-based cleaner. Biodegradable. Non-flammable. Free from hydrocarbon solvents. Effective & economical in use.rxsol-20-3002 has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits & general dirt and grime. Suitable for cargo tank cleaning, particularly applicable for removing soot deposits from systems.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Universal Wash

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Pale yellow liquid
  • Density In g/cm3 at 15°C: 1.0
  • Brand Name RXSOL
  • Metal No known effect
  • Rubber No known effect
  • pH Neat 8
We arew offering universal wash.
Product description:-
universal-wash-rx is a superior versatile multipurpose cleaning liquid detergent with good foaming qualities .it contains wetting agents that allow rapid penetration to remove light oil or dirt from any surface. Powerful for the toughest task and very economical dilute for most cleaning needs.
Directions for use and dose rates:-
for hard surfaces like floor woodwork walls appliances worktops, use 30 ml in 5 liters of hot water. Depending on degree of contamination universal-wash-rx should be mixed with warm water at a rate of 30-250 ml per 10 to 15 liters. I.e. to full cup of universal-wash-rx to a bucket of water. Universal-wash-rx solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into the universal-wash-rx solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, universal-wash-rx is not recommended for washing machines.
Stain removal:-
apply full strength before washing to remove stain from washable materials . Rinse well .

characteristics:-
1. Suitable for accommodation cleaning of woodwork, leather, desks, etc.
2. Suitable for cleaning of toilets and showers.
3. Suitable for cleaning of refer boxes.
4. Can be used for cleaning of windows and portholes.
5. Can be used for cleaning of paint brushes.
6. Can be used for cleaning of dishes.
7. Can be used for cleaning of hospitals.
8. Can be used for hand laundry cleaning.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Ultersonic Cleaner

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Green.
  • Brand Name RXSOL
  • Metal May attack zinc, aluminium and magnesium at concentrated solutions
  • Rubber No known effect
  • pH neat 12
  • Synthetic Rubber May swell
We are offering ultersonic cleaner.
Product description:-rxsol-16-3006 is a superior & powerful alkaline cleaner containing corrosion inhibitors to prevents the corrosion of metals . It is low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from hydrocarbon solvents, biodegradable and minimizes the extreme hazards to personnel in handling materials
applications:-rxsol-16-3006 suitable for cleaning engine components like fuel and lube oil filters, injection nozzles, pump components, inlet and exhaust valves & primarily refers to cleaning of hard surfaces, such as decks, tanks, engine-rooms, etc. Can be used for all types of cleaning and degreasing and may be applied by brush, hand spray, high and low pressure washing machines etc.
Directions for use and dose rates:-
general cleaning:-rxsol-16-3006 can be used for all types of cleaning & degreasing & may be applied by brush, hand spray, high and low pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. Will suffice for most applications. Hardened, carbonized or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on degree of contamination rxsol-16-3006 should be mixed with warm water at a rate of 50-200 ml per 10 liters. I.e. 1 cup of rxsol-16-3006 to a bucket of water. Rxsol-16-3006 solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into the rxsol-16-3006 solution. After cleaning, rinse off with cold or warm water.
Procedure for use with ultrasonic equip:-fill the ultrasonic unit chamber with approx. 30-35 liters of clean fresh water. During cleaning process, the ultrasonic bath must be de-gassed. Allow the bath to run for 1-2 minutes without any objects or cleaning agent until the evolution of gas bubbles ceases.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Hp Wash, Cleaner

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Greenish liquid
  • Density In g/cm3 : 1.1 at 15°C
  • Brand Name RXSOL
  • Metal Avoid contact with aluminum, zinc, Tin and their alloys. In concentrated stage
  • Rubber May swell
  • pH Neat 13 - 14
We are offering hp wash, cleaner.
Product description:-
this type of cleaner specifically formulated for use with high pressure advanced technology cleaning machines. Rxsol-22-3005 is concentrated liquid formulation of a non-caustic alkaline cleaner with emulsifier, detergents, surfactants, corrosion inhibitors, rust preventive. Due to free from caustic very gentle on hands. Rxsol-22-3005 quickly dissolves and removes grease and dirt deposits after emulsification. Compatible with most painted surfaces and dries leaving a good shine.
Procedure of use with dose rates:-

economical usage:-
dilute the concentrate rxsol-22-3005 with fresh water between 0.3 to 5 % ratios, and then spray the solution on surface to be clean, for heavily soiled areas, a preliminary cleaning is required. Allow solution to penetrate soil for complete emulsification about 3-5 minutes before washing off thoroughly with high pressure water.

general wash:-
dilute 1 part concentrate to 5 parts water or up to 20 parts water depends on contamination of deposit rxsol-22-3005can be used for conventional cleaning using brush, rag or spray. Allow solution 3-5 minutes for emulsification, and then rinse off with water.

note:-
after cleaning affects shining property. Can be used for cleaning of outside paintwork and decks.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Rxsol Hold Wash

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Brand Name RXSOL
Rxsol hold wash is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for oily stains and reduces or in combination with rxsol hold wash as a barrier remover

features & benefit:-
1. Heavy duty hydrocarbon remover
2. Can be diluted to suit cleaning needs
3. Environmentally friendly
4. Safe to use onto the occupied areas covered areas
5. Reduces the turnaround times
6. Cam be easily applied by ships crew

rxsol has the wide range of chemicals for cleaning chemicals for any type of vessel including those carrying coal petcock & related to get the cargo hold clean for the next cargo choice of suitable cleaning chemical is essential & very important when applied the chemical resident type apply as important role as a surface active agent need time to penetrate & to take outside particular from the hold surface

Additional Information:

Packaging Details : 20 Ltr , 25 Ltr

Delivery Time : Any Time

View Complete Details

Aqua Clean Hd

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Pale yellow clear liquid
  • Density In g/cm3 at 15°C: 1.0 +/- 0.05
  • Brand Name RXSOL
  • Metal Rubber May attack Zinc at concentrated solutions No known effect
  • pH Neat 12
we are offering aqua clean hd.
product introduction:-
rxsol-20-3018 mixture of emulsifier, new technology surfactants ( with high solvency and emulsification effect ) , corrosion inhibitors, rust preventive. due to free from caustic and hydrocarbon very gentle on hands & ideal for cleaning walls wood works, metals and all areas . acts as superior quality cleaner degreaser .

tank cleaning :-
(cargo tank cleaning after mineral, animal, vegetable and fish oil.)
method of application and doses :- 1st of all by stripping suction removes all possible oil (greasy materials). to prevents evaporation of lighter fraction oil flush the system with cold water. may be brushed on, sprayed (hand spraydirect injection) recalculate the system with rxsol-20-3018 solution.
1. 1 cleaning with washing machines. dose rate: 0.3-5 liter per ton wash water (0.03-0.5%).
2. cleaning with recirculation method. dose rate: 0.5-10 liter per ton wash water, (0.05-1%).
3. spot cleaning. hand sprayed neat or diluted up to 1-10 parts water and left for about 15-20 minutes before washing off.
rxsol-20-3018 has numerous general cleaning applications including the removal of greases, oil, sludge, carbon deposits, general dirt and grime. can be used as engine room cleaner. suitable for cargo tank cleaning. can be used as accommodation cleaner for bulkheads, decks, toilets. suitable for cleaning of soiled textiles as rugs, covers, mats, overalls, etc. effectively cleans glass fiber boats, hulls and painted surfaces.

Additional Information:

Packaging Details : 20 Ltr , 25 Ltr

Delivery Time : Any Time

View Complete Details

High Foam Liquid

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Pale yellow liquid
  • Density In g/cm3 at 15°C: 1.01
  • Brand Name RXSOL
  • Metal No known effect
  • Rubber No known effect
  • pH Alkaline
We are offering high foam liquid.
high foam liquid (rxsol-22-3002)

the importance of rx tuff by high-pressure cleaning
the job of high pressure cleaning can be done easier & quicker by simply using high foam liquid in correct dosages. Using a high pressure cleaner alone, without any cleaner, will not achieve optimal cleaning results high-pressure cleaning primarily refers to cleaning of hard surfaces, such as decks, tanks, engine-rooms, etc. And in the majority of cases the cleaning is done according to the so-called two-step method:

step 1: spraying the high foam liquidover the area to be cleaned. Step 2: washing down the area using a high-pressure water jet.

after the high foam liquidhas been sprayed on the surface and before the wash down begins, the chemicals penetrate & thoroughly moistens dirt & other grime. During wash down, the high foam liquidthoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results. In addition to being more effective, the use of high foam liquidsubstantially reduces the time required for the cleaning operation, as well as preventing dirt from reforming on the surface. The use of high foam liquidin correct dosages is half the job done.

3 pieces of good advice:
apply high foam liquidon dry surface where possible! a dry surface will absorb far better than a wet surface. When applying high foam liquidon vertical surfaces: start application from the bottom and work upwards! if beginning from the top and going downwards, the high foam liquidmay produce "channels" down the surface,
thereby running too fast off the surface. During high pressure cleaning: it is important that the rinsing water does not run over non-cleaned surfaces! the rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with optimum concentration of high foam liquidwill give the best effect.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Unipol

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Light yellow liquid
  • Brand Name RXSOL
  • DENSITY, in g/cm3 at 15°C: 1.1
  • FLASH POINT, (PMCC) in °C: N/A
  • pH, in 1% at 20°C 7–8
  • Metal: The product is compatible with all normally used metals and their alloys.
  • Rubber No known effect
  • Synthetic rubber: No known effect
We are offering unipol.
Product description
unipol is a ph-neutral, liquid concentrated detergent with good cleaning qualities. It contains effective but mild and environmentally safe wetting agents and surfactants that allow rapid penetration to remove fats and oils. Unipol is especially suitable for hydrocarbon freeing of tanks, and is safe on all tank coatings including zinc silicate
.
Applications
for the removal of traces of hydrocarbons to a hydrocarbon free wall wash test specification prior to loading of sensitive cargoes. Unipol may also be used as a general purpose economical tank cleaning detergent.

directions for use and dose rates
the most economical method of using unipol is by recirculation washing, using tank cleaning machines. Make up a solution of 15% in preferably fresh water in the tank and recirculate. Whenever possible, the cleaning solution should be heated to 5080c. Rinse off with hot fresh water. Alternatively, hand spray the tank with a 2050% solution of unipol and allow to stay for 3060 minutes before a final rinse with hot water. When the tank is cleaned to a water white standard, remove any free water and ventilate until the tank is dry.

features, benefits and applications
1. Non-caustic, ph neutral.
2. Solvent free
3. Non-flammable.
4. Does not contain nonyl phenol ethoxylates or otherestrogenic compounds.
5. Non-corrosive to metals.
6. Suitable for all tank-coatings.
7. Can be used for gas and hydrocarbon-freeing of tanks.
8. Can be used for deodorizing.
9. Complies with all environmental regulations and the eu detergent regulation
10. Imo approved and listed in annex 10 of the mepc.2 circular.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Diesel Guard

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Color Off white powder
  • Brand Name Any Indian Port
  • pH Alkaline ( 9 )
We are offering diesel guard.
Diesel guard nb pwd (rxsol-40-4002-025)cooling
water treat corrosion inhibitor ( high nitrite
content)rxsol-40-4002 powder (for radiators, dg -
sets, closed cooling system)
introduction:-rxsol-40-4002 is a dry powder,
nitriteborate based compound with unique
formulation with organic corrosion inhibitors , anti-
scalant for use in closed cooling water systems , for
preventing corrosion and scale formation in internal
combustion engines, compressor cooling system, dg -
set at high or low temperature. It is also acts as a
corrosion inhibitor ( protects all the metals including
cast iron , mild steel , copper .)
note:-the stable oxide film that is formed by rxsol-
40-4002 prevents corrosion caused by electrolytic
action between dissimilar metals used in the system .
Rxsol-40-4002 has been field tested and found to have
no detrimental effects on non metallic substances such
as seals, glands, packing, hoses, gaskets etc., normally
used in these systems
application-dg*sets:-internal combustion engines
closed circuit cooling system compressor cooling
system. Rxsol-40-4002 incorporates superior corrosion
inhibitors to prevent corrosion works by free of scale
deposits.
Advantages:-1.prolong the life of equipment by keeping
scale and corrosion free. Since rxsol-40-4002 is
alkaline and so will suppress acid corrosion, which
would otherwise result in corrosion damage such as
pitting. However, the alkalinity control is such that even
if the product is accidentally overdosed, the ph of the
water will remain within limits. The metals which would
be affected by extremes of alkalinity or acidity are
protected.
2.improves generating cooling efficiency by maintaining
a clean heat transfer
3.corrosion protection by using superior corrosion
inhibitor.
4.reduced maintenance and down time
5.compatible with coolants antifreeze solution
glycol
6.friendly with metals (like steel, copper, aluminum,
all alloys) & non-metal (rubber, hoses, gasket etc.)

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Biological Guard

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Clear yellow liquid
  • Density In g/cm3 at 1 5°C: 1.17
  • Brand Name RXSOL
  • Flash Point Above 75°C
  • Rubber No known effect
We are offering biological guard.
Introduction:-
rxsol-40-4003 is a very effective, amine based
dispersing cleaner for the control of fouling by marine
growth such as algae, shellfish , mussels, barnacles and
micro-organisms and fungal growth in marine sea
water cooling systems. Because of its molecular film
forming properties, rxsol-40-4003 is also acts as a
corrosion inhibitor
procedure of use:-
rxsol-40-4003 can be used in both static and flowing
systems. It should be preferably be started on a clean
system from beginning stage since it is formulated to
prevent growth rather than remove existing growth . (
existing growth can be clean by using rxsol -16- 1008
) note:- rxsol bg 4003 should only be diluted with
fresh water.
Dosage for sea water cooling systems:-
dose 150 500 ml of rxsol-40-4003 for every 100
tons of sea water flowing through the system per hour.
The treatment should be applied daily when the vessel
is on coastal waters. Normally the treatment is not
required when sailing deep sea .
For ballast tanks dose 1 liter of rxsol-40-4003 per 10
tons of water prior to ballasting, followed by a monthly
dose of 2 liters per 100 tons. For trim tanks, oil rig sea
legs and similar systems dose 25 liters of rxsol-40-
4003 per 100 tons of water. General testing for bacteria
can be done with our rxsol dip slide methods(
designed to check and see anytime anywhere invisible
danger bacteria fungus grow from cooling drinking
water ) which indicate the extent of the bacteriological
contamination.

Additional Information:

Packaging Details : 20 Ltr , 25 Ltr

Delivery Time : Any Tme

View Complete Details

Cooltreat

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Colorless liquid
  • Brand Name RXSOL
  • Density, g/cm3 at 20°C: 1.055
  • pH 8.2
  • Metal All commonly used
  • Rubber No known effect
We are offering Cooltreat.
Product Description
Cooltreat is an organic liquid corrosion inhibitor with
extended life for use in closed cooling water systems.
This product offers protection for all commonly used
materials in engine cooling water systems, including
aluminum. Unlike other coolants, Cooltreat does not
contain components subject to rapid depletion i.e.
Nitrite and Silicate. Based on aliphatic acid technology
Cooltreat is stable and hence the test frequency can be
reduced. Cooltreat is fully organic and biodegradable.

Directions for Use
Cooltreat is a highly effective corrosion inhibitor for all
common metals in cooling water systems. Testing has
shown no detrimental effects on non metallic
substances such as seals, glands, packing, hoses, gaskets
etc., normally used in these systems. Where most
traditional inhibitors react with the metal surface and
form oxides that prevent further corrosion, Cooltreat
applies a thin and durable layer of protective molecules
to the metal surfaces. This technology prevents the
continuous build-up of insulating layers on heat transfer
surfaces. For new builds, RXSOL Ships Service
recommends cleaning of the water system before
commencing service. The system will always contain
small amounts of oil and iron oxides, and this can be
removed in one operation. If the system is corroded or
is more heavily contaminated, degreasing scale is
recommended. For systems previously treated with
other products, RXSOL Ships Service recommend to
drain and flush the system before refilling with distilled
water and Cooltreat . The system should be clean and
free from scale and corrosion products when starting
the treatment. The use of antifreeze is sometimes
required if the vessel is to be laid up in cold areas,
Cooltreat can be used in conjunction with glycols for
frost protection. If used in conjunction with glycols, It is
recommended to increase the product concentration to
8%.

Additional Information:

Packaging Details : 25 Ltr, 210 Ltr

Delivery Time : Any time

View Complete Details

Rxsol Elc

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Brand Name RXSOL
We are offering rxsol elc.
Product description
rxsol elc meets or exceeds the requirements of the
following speacifications and guidelines: rxsol elc
1. Factory-fillused as standard factory-fill for all
cat machine cooling systems.
2. Lower maintenance costsreduces engine
coolant and additive costs by as much as 500%
compared to conventional coolants. It
eliminates the need for supplemental coolant
3. Additives, extends coolant change-out intervals
and reduces disposal requirements.
4. Advanced metal protectionincorporates an
advanced formula technology with organic
5. Acid additive corrosion inhibitors, such as a
combination of mono and dicarboxylates for
maximum protection of copper, solder, brass,
steel, cast iron and aluminum.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

RXSOL 2000

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Brand Name RXSOL
Introduction:-
RXSOL-40-2000 a unique formulation with organic
Corrosion Inhibitors , Anti-Scalant for use in closed
cooling water systems , for preventing corrosion and
scale Formation in Internal combustion engines,
compressor cooling system, DG -set at high or low
temperature. It is a concentrated liquid , also used as a
corrosion inhibitor ( Protects all the metals including
cast iron , mild steel , copper.

Note:-
The stable oxide film that is formed by RXSOL-40-2000
prevents corrosion caused by electrolytic action
between dissimilar metals used in the system . RXSOL-
40-2000 has been field tested and found to have no
detrimental effects on non metallic substances such as
seals, glands, packing, hoses, gaskets etc., normally
used in these systems.

Applications-DG*Sets:-
Internal combustion engines closed circuit cooling
system compressor cooling system. RXSOL-40-2000
incorporates superior corrosion inhibitors to prevent
corrosion works by free of scale deposits.
Advantages: -

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Shot Universal Bwt

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Clear liquid
  • Density n g/cm3 at 15°C: 1.1±0.02
  • Brand Name RXSOL
  • pH (1 Vol %) >13
  • Metal Corrosive to aluminum, magnesium, zinc and tin.
  • Rubber No known effect.
We are offering shot universal bwt.
Boiler water treatment
universalone shot (rxsol-50-5001)

product description:-rxsol-50-5001 is a well-balanced blend for boiler water treatment, resulting in a scale and corrosion control by one simple operation.

function mechanism:
alkalinity control:-this components of rxsol-50-5001-020 chemically precipitate the hardness of salts like calcium & magnesium & neutralizes the acidic conditions. Hardness control:-rxsol-50-5001provides phosphate reserve to effectively react with and precipitate the hardness salts introduces with the feed water. Sludge conditioner:-rxsol-50-5001 component will preventing the sludge from adhering to metals surfaces. Boiler sludge can only be removed by blow down.
Oxygen scanvangers:-catalyzed liquid of rxsol-50-5001 controls the formation of oxygen to protects boiler & steam line corrosion protection. As an additional benefits it will assist to neutralize dissolved carbon dioxide. In this way rxsol-50-5001 preventing oxygen pitting corrosion.

application , dosage:- rxsol-50-5001 is strongly alkaline. Rxsol-50-5001 is best applied neat or diluted with any con lenient strength on a continuous basis using a suitable chemicals pump . The product should be applied to the boiler feed tank or feed line to ensure adequate mixing. The dosage rate of rxsol-50-5001 is dependent on boiler operating condition, feed 2-3 ltrs of rxsol-50-5001 solution for per 1000 ltr of boilers water then control the system by periodic alkalinity test procedure. If p-alkalinity is below 200 ppm increase the ratio of rxsol-50-5001solution. If p-alkalinity is above 400 ppm reduce the concentration of rxsol-50-5001solution by dilution with water.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Boiler Cogulant

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance LIQUID
  • Color AMBER
  • Density 1.2
  • Brand Name RXSOL
  • AMBER 9
We are offering boiler cogulant, directions for use
boiler coagulant prevents the formation of deposits on boiler internal surfaces. Sludge is kept dispersed in small particles and conditioned to be removed by normal blow down. In this way tube overheating due to deposits is avoided. The treatment is primarily used in conjunction with hardness control, but also with other rxsol chemical treatments. Boiler coagulant can also be used where minor oil contamination has been experienced, the oil being required to be coagulated for removal by blow down. However, it must be noted that if oil contamination is continuous and excessive, off-line cleaning will be required. The source of oil contamination must be stopped immediately.

dosing method
for optimum results dose boiler coagulant directly to the boiler via the bypass pot-feeder. Boiler coagulant is compatible with any rxsol boiler water treatment and dosing can be combined. Dosage and control the initial dosage is 20 ml of treatment daily for every ton of boiler capacity. Daily bottom blow down is required when using boiler coagulant.

features
. Liquid product, easy to feed.
. Prevents the formation of adherent deposits and sledges in boilers.
. Keeps sludge dispersed for efficient removal by blow down.
. Keeps boilers clean and extends boiler operational time between cleaning.
. Used in conjunction with any products in rxsol range of boiler water treatments.
. Used to coagulate small amounts of oil which have contaminated the boiler water.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Alkalinity Control

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Brand Name RXSOL
We are offering alkalinity control.
Description:- rxsol-50-500 is a concentrated liquid alkaline product for corrosion and calcium scale control in boilers. Suitable for low-pressure boiler systems (0-32 bar) , medium-pressure steam propulsion vessels

application:- rxsol-50-500 provides the alkaline condition for hardness control to function correctly. Without the correct precipitation and subsequent blow down of hardness salt, scale would form. This would result in restriction in water flow, ineffective heat transfer and local corrosion. The end effect would be an inefficient boiler and ultimately component failure. Rxsol-50-500 also provides the alkaline condition required for corrosion control, by neutralization of acidic gases
dose:- for optimum results dose rxsol-50-500 direct to the boiler with a rxsol boiler water treatment dosing unit, or via the bypass pot- feeder installed in the boiler feed line. Required dosage can be controlled by ph & alkalinity test dosage chart . One (1) milliliter of rxsol-50-500 concentrated alkaline liquid per ton of distilled water provides 0.5 ppm of alkalinity hydrate.

note:- it can also be used as a neutralizing agent following acid cleaning with descaling materials ( rxsol-11-1008--dc descaling liq. rxsol-54-1008-sa safe acid pwd )

(32-60 bar). And also suitable to used for high pressure steam generating systems (60-84 bar). Mechanism it converts calcium hardness into soft, non-adherent sludge that is easily removed by blow down.

Additional Information:

Packaging Details : 20 Ltr , 25 Ltr

Delivery Time : Any Time

View Complete Details

Combotreat Pwd-i

134.10 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Clear liquid
  • Brand Name RXSOL
  • pH (1 Vol %) -13
  • Metal Corrosive to aluminum, magnesium, zinc and tin.
  • Rubber No known effect.
We are offering combotreat pwd-i.
Boiler water treatment

product description:-rxsol-50-5004 is a well-balanced blend of several powder for boiler water treatment, resulting in a scale and corrosion control by one simple operation.

alkalinity control:-this components of rxsol-50-5004 chemically precipitate the hardness of salts like calcium & magnesium & neutralizes the acidic conditions. Hardness control:-rxsol-50-5004 provides phosphate reserve to effectively react with and precipitate the hardness salts introduces with the feed water. Sludge conditioner:-rxsol-50-5004component will preventing the sludge from adhering to metals surfaces. Boiler sludge can only be removed by blow down. Oxygen scavenger :- catalyzed of rxsol-50-5004 controls the formation of oxygen to protects boiler & steam line corrosion protection. As additional benefits it will assist to neutralize dissolved carbon dioxide. In this way rxsol-50-5004 preventing oxygen pitting corrosion.

applications, dosage:-rxsol-50-5004 is strongly alkaline. Rxsol-50-5004 is best applied diluted with water , any convenient strength on a continuous basis using a suitable chemicals pump . The product should be applied to the boiler feed tank or feed line to ensure adequate mixing. The dosage rate of rxsol-50-5004 is dependent on boiler operating condition, feed 1 kg of rxsol-50-5004solution for per thousand ltr of boilers water then control the system by periodic alkalinity test procedure. If p-alkalinity is below 200 ppm increase the ratio of rxsol-50-5004 solution. If p-alkalinity is above 400 ppm reduce the concentration of rxsol-50-5004 solution by dilution with water.

control procedure:-control is by simple boiler water tests or rx cleansers can provide a suitable test kits for this purpose.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any time

View Complete Details

Hardness Control Liquid

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Brand Name RXSOL
  • Metal No Known Effect Inhalation Remove to fresh air
  • Rubber No known effect Eye Contact Flush with water at least for 15 min.
  • pH Alkaline Note Acts as an acid-neutralizing agent.
We are offering hardness control liquid.
product - description:- rxsol-50-5006 is a superior heavy duty and highly concentrated water based alkaline cleaner, containing specially selected detergents and powerful long chain organic syndet , specific salts with surfactants & wetting agents . It is low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from hydrocarbon solvents , biodegradable and minimizes the extreme hazards to personnel in handling materials . Also suitable for tank cleaning . It can be used as a general purpose cleaner to remove oil and grease deposits. Using procedure:-first of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using rxsol-50-5006 is by direct injection followed by recirculation washing, using tank cleaning machines. Spraying method: directly spray on the contaminated area and let it act for 5-10 minutes. Then clean the system under high pressure. A solution of 5-10% in fresh water can be used for this purpose also , and may be sprayed on and hosed off using high pressure. Circulation method :cleaning the oil side of tank can be cleaned by circulating through with rxsol-50-5006rock and roll method: fill the tank with water (fresh or sea) up to 25 - 30% of its volume then 520% (depend on contamination) rxsol-50-5006 will add , let it stand for approximately 12-24 hours. Then fill with more water to 90% of the tank's capacity. This way the tank will be cleaned by natural agitation due to wave motion. Let for a few days, then drain the tank and ballast-deballast 2-3 times in order to achieve complete and thorough rinse off.
product properties:- appearance pale yellow liquid handling although this product is not dangerous but avoid contact with eye, naked skin, (wounded) incase contact wash with copious amount of water immediately. Not for internal use.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Cat Sulphite

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance LIQUID
  • Color PALE PINK
  • Brand Name RXSOL
  • pH 4
We are offering cat sulphite.
Cat. Sulphite liquid (rxsol cat sulphite liquid) is a sodium sulphite based product in ready to use liquid form. The catalyst ensures rapid elimination of oxygen in the boiler system. Rxsol cat sulphite liquid should be used in conjunction with the other rxsol boiler water treatment products. Oxygen is highly corrosive in the boiler system, even in small amounts. Elevated temperature operation of the hot well is a good practice to remove gases like oxygen. Even so, the feed water contains oxygen which can create severe corrosion, shown as deep and local pitting. This will quickly cause failure of the boiler metal. Rxsol cat sulphite liquid reacts with oxygen to form inert sodium sulphate, thus preventing oxygen attack.
Directions for use
rxsol cat sulphite liquid is a fast acting oxygen scavenger for use in ships boiler system in conjunction with other rxsol boiler water treatment products. High feed water temperature should be maintained for optimum product performance, reduced product consumption and optimum system protection.
Dosing method
for optional results rxsol cat sulphite liquid should be dosed continuously by means of a metering pump into the feed line, after the recirculation valve. Rxsol cat sulphite liquid can be fed using rxsol bwt dosing system. Slug dosing into the hot well as well as low hot well temperatures will strongly reduce the efficiency of this treatment.
Rxsol cat sulphite liquid should be dosed separately from other boiler water treatments.
Dosage and control
the quantity of rxsol cat sulphite liquid required depends on the operation of the boiler system. As a guide 10 ppm sulphite is required to react with 1 ppm oxygen.
A reserve of 20 to 50 ppm sulphite is to be maintained in the boiler water, determined by regular testing. A normal dosage is approximately 1 ltr per day, depending on system layout.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any time

View Complete Details

Rxsol Autotreat

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Brand Name RXSOL
We are offering rxsol autotreat. Directions for use
autotreat is a boiler water conditioner designed for optimum protection of ships boiler systems when used in conjunction with oxygen scavenger plus. The product combines well known phosphate treatment with new polymer technology. This ensures that precipitates are kept soft and no adherent for easy removal by blow down. The product should always be used in conjunction with an oxygen scavenger, preferably rxsol oxygen scavenger plus. Note that this product is formulated for use in conjunction with good quality feed water.
Directions for use
autotreat is a boiler water conditioner designed for optimum protection of ships boiler systems when used in conjunction with oxygen scavenger plus. The product combines well known phosphate treatment with new polymer technology. This ensures that precipitates are kept soft and no adherent for easy removal by blow down.
The product should always be used in conjunction with an oxygen scavenger, preferably rxsol oxygen scavenger plus. Note that this product is formulated for use in conjunction with good quality feed water.
Dosing method
the product should preferably be dosed continuously with a rxsol boiler water treatment dosing unit. Alternatively the product can be fed into the feed line by means of a by-pass pot feeder.
Dosage and control
minimum dosage is 1.2 liters of autotreatton of boiler capacity to reach a p-alkalinity level of 100 ppm. For an untreated system it is recommended to initially bring
the treatment up to a suitable level of 200 ppm p-alkalinity. The dosage chart given below is for convenience to determine the amount of product required to elevate p-alkalinity. Note that the table is based on reaching 200 ppm. P-alkalinity.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Vapour Treat Sol

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Density In g/cm3 at 15°C: 1.1
  • Brand Name RXSOL
  • Appearance Thermal Firmness Clear yellow liquid 250° C
  • pH (1 Vol%) 9
  • Metal No known effect
  • Rubber No known effect
We are offering vapour treat sol.
Introduction: rxsol-51-6001 is a concentrated solution of a polyelectrolyte polymer and antifoaming agents for use in sea water evaporator as a controller of scale and foam in side the evaporators. It can be used as a scale inhibitor in the feed water to evaporators producing fresh water .
Procedure of use and dose rates: polyelectrolyte polymer of rxsol-51-6001 reacts with the potential scale forming salts in the water to prevent them from adhering to heat transfer surfaces. These solids are held in suspension and easily removed from the evaporator line .finally rxsol-51-6001 also have deforming properties by which will stop foaming in evaporator. And by that way distilled water quality is maintained inside the evaporator.

setting the flow rate: the treatment is added to the dosage tank and mixed with water. Example: with the 0.5 liters of vaptreat add sufficient water to make up 50 liters of liquid. The standard flow meter is adjustable-rate=0-l00mlminute. Flow rate calculation: flow rate = 50 liters24 x 60= 35 mlmin setting i.e. This will last 24 hours.

note: we can remover existing mineral scale deposits by using a 5-10% solution of rxsol-51-6001.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Rxsol Potable Water Treatment Liquid

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Brand Name RXSOL
We are offering rxsol potable water treatment liquid.
Directions for use
potable water stabilizer effectively and economically provides scale and corrosion control in potable water systems and other shipboard once-through water systems. Dosage varies between 4 8 mgltr for ordinary water treatment. For drinking water, dosage should always be kept at or below 9 mgltr (9 gton).the powder product should not be dosed directly into the water system. A water solution should be made prior to dosing.

dosing method
potable water stabilizer should be dosed to a suitable point in the system. If the expansion tank is used, adequate circulation must be assured.

dosage and control
make a 5% solution in fresh water by adding the powder slowly to the water while stirring. The solution should preferably ne portioned to maintain desired dosage, either by means of a simple bypass feeder, or with rxsol dosage system for water treatment. The product can be injected into the discharge line of the fresh water generator or directly into the fresh water pumps suction manifold. If a high percentage of shore water is used the solution must be slug dosed into the tanks prior to taking water. Inject a 5% solution at a rate of 0.12 liters per m3 of water to obtain a 6 mgltr concentration.

features
prevents red water in potable water systems. Provides scale and corrosion control in hot water heaters, coolers and water tanks. Controls corrosion in pipelines and other equipment handling softened or evaporated water. Effective at temperatures up to 60c (140f). Increases system life and reduces maintenance costs. Approved by norwegian national institute of public health as an additive to drinking water. Approved by nsf according to standard 60. No restrictions on use of the treated water as feed water to boilers or engine cooling systems.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Soot Remover (liquid)

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Brand Name RXSOL
  • APPEARANCE: Clear blue liquid
  • pH: 3
  • DENSITY, g/cm3 at 15°C: 1.12
  • FLASH POINT (PMCC) °C: Not applicable
Product Description
Soot Remover Liquid is formulated for effective prevention of soot and fire scale deposits from boilers and diesel engine exhaust systems.

Product Properties
If fire scale is allowed to form on heat exchangers, the loss of efficiency can be directly related to extra fuel consumption. A 1 mm deposit is approximately equivalent to a 10% efficiency loss, a 3 mm deposit can reduce efficiency by up to 50%. The normal ignition temperature of soot is around 600C. This means that it is burned only in the hottest parts of the boiler or diesel exhaust systems. Due to the catalytic action of Soot Remover Liquid, the ignition temperature of the sootfire scale is reduced to less than 250C. The carbon deposits are thus ignited, leaving an easily removable ash. The use of Soot Remover Liquid not only provides greater fuel efficiency, but also prevents acid formation in areas where severe corrosion could result in expensive damage, i.e. heat exchangers, super heaters, economizers, exhaust pathsstacks.

Directions of Use and Dosage Rates
Soot Remover Liquid should be introduced to the boiler through a suitable port, preferably with an injector, ensuring that the liquid is spread through the flame path toward the back of the combustion chamber. For Diesel engines, inject Soot Remover Liquid directly into the exhaust system upstream of the area to be treated. Soot Remover Liquid should be injected with the following dosing equipment:

Features, Benefits and Applications
1. For the prevention of soot and fire scale deposits in
2. diesel engine and boiler exhaust systems
3. For reduction of cold-end corrosion where surface
4. temperatures are lower than the dew point of the exhaust gases
5. Reduce soot and slag deposit
6. Reduces cold-end corrosion
7. Improves heat transfer
8. Increases boiler efficiency
9. Aids soot blowing

Additional Information:

Packaging Details : 25 Ltr

Delivery Time : Any Time

View Complete Details

Soft Hand Shampoo

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Brand Name RXSOL
  • Appearance Green liquid
  • pH 5-7
We offer soft hand shampoo. Hygiene and hand washing

soft hand shampoo is scarcely necessary to extol the virtues of good hygiene. There are many bacteria that may be found on the skin of a particularly healthy person. These are spread either through direct contact or via equipment and surfaces. Disinfecting
the hands is a requirement within many professions - health care and the catering trade are prime examples.softcare plus is an antimicrobial skin cleanser which contains :
2, 4, 4, trichloro-2-hydroxy diphenylether - 0.5% (ww). This compound is skin substantive hence it gives residual sanitatisation for longer period. This helps reduce the risk of food contamination or cross-infection at your establishment.

usage softcare plus gentle hand cleanser is ready-to-use. It can be easily dispensed through any refill top-fill dispensers. Softcare plus disinfectant cleanser is so formulated that, about 3 - 5 ml. Is sufficient for a good hand wash. This makes it extremely cost-effective.

Additional Information:

Packaging Details : 1400 ml, 5 Ltr

Delivery Time : Any Time

View Complete Details

Rxsol Zyme Btc

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Green liquid
  • Brand Name RXSOL
  • DENSITY, in g/cm3 at 15°C 1.0
  • Metal No known effect
  • Rubber No known effect
  • Synthetic Rubber No known effect
Rxsol zyme btc is a unique biological active liquid formulation containing specialized bacterial strains, biodegradable low foaming chemical cleaners and anti foam agents.
How it works
rxsol zyme is specifically formulated to replace aggressive, toxic toilet cleaners that can disable the sewage treatment plant by killing the naturally occurring bacteria that are essential to its operation. Conventional toilet cleaners may also cause foaming in the vacuum inductor which destroys the vacuum in the sanitary flushing system. Rxsol zyme btc effectively cleans the toilets and doses millions of selected safe bacteria into the sanitary system. These powerful specialized bacteria colonies the organic waste lining the pipe system and remove the organic deposit. On draining to the sewage treatment plant, the bacteria will enhance the biological activity, reducing solids and odors. Grease, fats, starch and other organic compounds are digested by rxsol zyme btc. The degradation of paper, protein, waste product residuals and other odorous materials is also enhanced. Rxsol zyme btc cleans more thoroughly and deeply compared to conventional cleaning products. The use of cleaning products containing hazardous chemicals such as acids, caustics, bleaches, disinfectants, etc., can be reduced.

Additional Information:

Packaging Details : 10 Ltr, 25 Ltr

Delivery Time : Any Time

View Complete Details

Rxsol Zyme Dpc

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Tan, saw dust like powder in sealed solupacs
  • Brand Name RXSOL
  • pH, in conc N/A
  • Metal No known effect
  • Rubber No known effect
  • Synthetic Rubber No known effect
Product description
rxsol zyme dpc is a concentrated biologically active powder formulation containing a blend of patented bacterial strains, specifically developed to deal with sewage wastes. It is packed as water soluble sachets (solupac).

how it works
rxsol zyme dpc is formulated to degrade excess residual organic waste products causing blockage, or slow draining in sinks, showers, scuppers, drains, etc. The specialized bacterial strains and enzymes in rxsol zyme dpc will digest grease, fats, starch and other organic compounds. The bacteria in rxsol zyme dpc will colonies the waste soil, which lines the pipe work system, and degrade the waste all the way down to carbon dioxide and water, until the system is clean. On draining to the holding tank or sewage treatment plant, rxsol zyme dpc will greatly enhance the biological activity breaking down solids and removing obnoxious odors which can vent back through the systems.

directions of use and dosage rates

pipe cleaning
maintenance dosing will keep sinks, scuppers and waste food disposal units clean, clear and odor free. A liquid solution should be prepared by adding one solupac to 10 liters of hand hot (35c) fresh water and left for 15 minutes (stirring periodically) for the bacteria to activate. Initial doses of 0.5 liters of this solution should be applied into sinks, scuppers, drains, waste food disposal units, etc. A maintenance dose once or twice a week can then be applied to keep the pipes in clean condition. Harsh toxic cleaners (acids, caustics, disinfectants) should not be used as these will kill off the bacterial action in the pipes. Before plumbing work
for pipe modification or retrofits, pipes can be cleaned by isolating the system and filling pipes with the solution for up to 48 hours before draining. If necessary, further applications should be made until drains run clean.

Additional Information:

Packaging Details : 5 Kg, 10 Kg

Delivery Time : Any time

View Complete Details

Rxsol Zyme 700 Fn

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Appearance Tan, saw dust like powder in sealed solupacs
  • Brand Name RXSOL
  • pH, in conc. N/A
  • Metal No known effect
  • Rubber No known effect
  • Synthetic Rubber No known effect
Product description:-rxsol zyme dpc is a concentrated biologically active powder formulation containing a blend of patented bacterial strains, specifically developed to deal with sewage wastes. It is packed as water soluble sachets (solupac).

how it works
rxsol zyme dpc is formulated to degrade excess residual organic waste products causing blockage, or slow draining in sinks, showers, scuppers, drains, etc. The specialized bacterial strains and enzymes in rxsol zyme dpc will digest grease, fats, starch and other organic compounds. The bacteria in rxsol zyme dpc will colonise the waste soil, which lines the pipe work system, and degrade the waste all the way down to carbon dioxide and water, until the system is clean. On draining to the holding tank or sewage treatment plant, rxsol zyme dpc will greatly enhance the biological activity breaking down solids and removing obnoxious odors which can vent back through the systems.

directions of use and dosage rates

pipe cleaning
maintenance dosing will keep sinks, scuppers and waste food disposal units clean, clear and odor free. A liquid solution should be prepared by adding one solupac to 10 liters of hand hot (35c) fresh water and left for 15 minutes (stirring periodically) for the bacteria to activate. Initial doses of 0.5 liters of this solution should be applied into sinks, scuppers, drains, waste food disposal units, etc. A maintenance dose once or twice a week can then be applied to keep the pipes in clean condition. Harsh toxic cleaners (acids, caustics, disinfectants) should not be used as these will kill off the bacterial action in the pipes. Before plumbing work for pipe modification or retrofits, pipes can be cleaned by isolating the system and filling pipes with the solution for up to 48 hours before draining. If necessary, further applications should be made until drains run clean.

Additional Information:

Packaging Details : 5 Ltr, 10 Ltr

Delivery Time : Any time

View Complete Details

Bleaching Liquid

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Brand Name Rxsol
Description :
bleach, which is also referred to as clorox or dixichlor, is the trade name for sodium hypochlorite solution (11-13%) and is a strong oxidizer. Bleach substitute is also an oxidizer.

*these products become more aggressive with temperature increase, and should not be allowed to dry on tank walls or stored in cargo tanks as cleaning solution or slops.
1) bleach will
2) remove odors.
3) remove color.
4) improve permanganate time.

spraying:
following rough washing to a good water white or better, apply dilute bleach to 1 3% strength. First wet the tank surface (spray with di water), then spray all over with bleach, wait 30 minute (but do not allow to dry) and then rinse very well with di water, including the tank top towards the sump. To ensure that you have covered all areas properly, this process should be carried out at least twice with good di water.

re-circulation :
following rough washing to a good water white standard or better, apply dilute bleach to 1-3% strength. Mix sufficient bleach with fresh water in the tank and heat this mixture to 40 50 0 c, circulate through the drop line if fitted and then circulate through butterworth machine for 3 hours. After re-circulation immediately warm butterworth to (500 c) the tank for 3 hours at maximum pressure, increase the water temperature to 80-85 o c after 45 minutes. Check (by smell) that there is no bleach remaining, then fresh water rinse and dry.

* when there are a number of tanks requiring re-circulation, it may be significantly more efficient to make up a large batch or number of batches that can be transferred on between tanks as required.

* use a strainer at the pump stack when circulating any solution. Tank lining stainless zinc epoxy phenolic (extreme care must be taken if product other than bleach. Substitute is to be used in any coated space).

Additional Information:

Packaging Details : 1 Ltr, 5 Ltr, 10 Ltr, 20 Ltr, 25 Ltr

Delivery Time : Any time

View Complete Details

Oil Spills Dispersant (type-i)

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Brand Name RXSOL
  • Appearance Amber liquid / Low viscous
  • Odor Aromatic
  • Density In g/cm3 at 15°C: 1.00
  • Flash Point MATERIALS BOILS AT 68°C
  • Metal No known effect
  • Rubber AVOID
  • Synthetic rubber May Swell
  • pH 7 +0.5
We are offering oil spills dispersant (type-i).
Product description:-
rxsol-17-1012-020 emulsifier based product with excellence efficiency and low toxicity with superior penetrating & surface active agents. This product is specially designed for complete emulsification of oil by which dispersion takes place .area: at sea, at shore either in port or off board, for
oil spills-at-sea:-
rxsol-17-1012 is used concentrated by direct spraying to clean up oil spills at sea it can be applied by hand spray, work boats with mounted spray booms , or fire hoses with injectors. Allow some time for the oil to absorb the rxsol-17-1012 & then disperse mixture by vigorous agitation using fire hoses , ship's propeller, breaker boards towed behind work boats, etc
oil-on-beaches-and-shore-line:-
rxsol-17-1012-020 should be applied neat by spraying over oiled areas. Allow time for the oil to absorb the dispersant then follow by washing down the beach or rocks, etc. The treatment rate depends on the nature and thickness of the oil spill, also on the age and condition. Under conditions where it is a thin slick of oil, 1 liter of rxsol-17-1012 wb is enough to treat approximately 20-30 sq. M of oil. In many cases, several applications may be necessary. (depends on the size of contamination in the affected area)
oil-spill-on-deck :-
remove as much of the oil as possible, then spray rxsol-17-1012-020 over area covered by the oil & allow sometimefor it to be absorbed. Disperse the mixture with water by means of a fire hose depending on type of oil it may be necessary to use several applications.
Characteristics:-
biodegradable and having low toxicity. Self life 5 years (from manufacturing date ) high emulsification rate converts hydrocarbons particle in to very fine emulsions. Ready to use product. Suitable for crude bitumen residual diesel kerosene, white spirit & lube oils etc .effective on oil spills at platform , during loading or discharging of cargo or bunkers. For cleaning of spills on deck, ships side, piers, wharfs, etc.

Additional Information:

Packaging Details : 20 Ltr, 25 Ltr, 210 Ltr

Delivery Time : Any Time

View Complete Details

Oil Spills Dispersant (type-iii)

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Brand Name Rxosl
  • Appearance Amber liquid / Low viscous
  • Density In g/cm3 at 15°C: 1.00
  • Flash Point MATERIALS BOILS AT 68°C
  • Metal No known effect
  • Rubber AVOID
  • Synthetic rubber May swell
  • pH 7 +0.5
We are offering oil spills dispersant (type-iii).
Product description:-rxsol-17-1047 emulsifier based product with excellence efficiency and low toxicity with superior penetrating & surface active agents . This product is specially designed for complete emulsification of oil by which dispersion takes place . Area: at sea, at shore either in port or off board , for industrial purpose.
Procedure of use:rxsol-17-1047 is used concentrated by direct spraying to clean up oil spills at sea . It can be applied by hand spray, work boats with mounted spray booms , or fire hoses with injectors. Allow some time for the oil to absorb the rxsol-17-1047 & then disperse mixture by vigorous agitation using fire hoses , ship's propeller, breaker boards towed behind work boats, etc
oil - on - beaches - and - shore - line:-
rxsol-17-1047 should be applied neat by spraying over oiled areas. Allow time for the oil to absorb the dispersant then follow by washing down the beach or rocks, etc. The treatment rate depends on the nature and thickness of the oil spill, also on the age and condition. Under conditions where it is a thin slick of oil, 1 liter of rxsol-17-1047 is enough to treat approximately 20-30 sq.m of oil. In many cases, several applications may be necessary.(depends on the size of contamination in the affected area )
oil spill on deck:-remove as much of the oil as possible, then spray rxsol-17-1047 over area covered by the oil & allow some time for it to be absorbed. Disperse the mixture with water by means of a fire hose depending on type of oil it may be necessary to use several applications.
Characteristics:- bio-degradable and having low toxicity. Self life 5 years (from mfr. Date) .high emulsification rate converts hydrocarbons particle in to very fine emulsions. Ready to use product. Suitable for crude bitumen residual diesel kerosene, white spirit & lube oils etc .effective on oil spills at platform , during loading or discharging of cargo or bunkers .for cleaning of spills on deck, ships side, piers, wharfs etc.

Additional Information:

Packaging Details : 25 Ltr, 210 Ltr

Delivery Time : Any Time

View Complete Details

Slip Coat (hold Block)

133.60 /2 Gallon Get Latest Price
  • Min. Order (MOQ) 1 Gallon
  • Brand Name RXSOL
We are offering slip coat (hold block).
Emulsion based non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of rxsol thin barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results. Slip coat rxsol hold block is a heavy duty protective solution for hold of vessels which carrying corrosive and or messy cargos such as sulphur, salt, petcoke, coal and concentrates. It can be easily removed after discharging of cargo .

features:-
1. Protects metal against corrosive cargo.
2. Safe on all coatings, and to the personnel handling it.
3. Protects paint against cargo penetration.
4. Environmentally friendly.
5. Safe to use in occupied covered areas.
6. Reduces turnaround times.
7. Easy to direct spray.

application
rxsol hold block is a heavy duty protective solution for hold of vessels , which carrying corrosive and or messy cargos such as sulphur salt petcock coal and concentrates. It can be easily removed with it recommendation dose for smooth surface:

this materials can be use directly with low pressure machine or manually by garden spray pump. In general practice on smooth & clean surface each drums of 210 ltrs covers 2000 to 2500 sq meter while on rough and rusted surface require more quantities of materials.

Additional Information:

Packaging Details : 25 Ltr, 20 Ltr

Delivery Time : Any Time

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Kiran (Dubi Chem Marine International Est)
  • Al Hale , Fujairah, UAE
  • Share us via