Easy World Technology LLC DUBAI

1-channel H.264 Industrial Video Encoder for IP surveillance Features and Benefits  3 simultaneous video streams for H.264 and MJPEG  Video latency under 200 ms  2 Ethernet ports for cascade and Ethernet port redundancy Moxa DynaStream™ function supported for network efficiency OnVIF supported for standardization and interoperability Local storage capability with SD card slot Industrial design with -40 to 75°C operating temperature Free VPort SDK PLUS supported Introduction The VPort 461 1-channel industrial video encoder with H.264 video compression algorithm provides the best video quality on the market, but with a smaller bandwidth requirement than other video compression standards. In addition, to meet various video stream requirements, the VPort 461 can provide up to 3 video streams simultaneously with H.264 and MJPEG compression format. Video streams can be used for different purposes, such as viewing, recording, and analyzing, and the industrial rugged design, which includes a -40 to 75°C operating temperature, IP30 form factor protection, and industrial certifications, make the VPort 461 suitable for harsh environments. The VPort 461 is equipped with Moxa’s innovative DynaStream™ function for decreasing the bandwidth consumption of your video transmissions. DynaStream™ can reduce or increase the video frame  rate automatically to make the video stream controllable by the system and system adminstrator. Rugged Design for Mission-critical Industrial Environments   -40 to 75°C wide operating temperature 2 Ethernet ports for cascade and port redundancy 1  RS-232/422/485 COM port for controlling external serial devices over Ethernet Redundant 12/24 VDC and 24 VAC power inputs for greater reliability Metal housing with IP30 protection against dust DIN-Rail mounting installation for industrial environments UL508 (Pending) and Class I, Div. 2 (Pending) certified for hazardous locations Meets NEMA TS2, Section 2 requirements Advanced Network Protocols Support Efficient Network Transmission and Integration Modbus/TCP for easy communication with SCADA software Standard RTSP (real-time streaming protocol) video streaming for easy integration Multicast (IGMP) protocols for efficient network transmission SNMPv1/v2c/v3 MIB-II for easy network management QoS (ToS) for configuring the transmission priority of video streams UPnP, DDNS, and IP filtering supported Two Ethernet Ports for Cascading and Port Redundancy The VPort 461 has two built-in 10/100 Mbps Ethernet ports for cascading multiple VPort 461 units. With the cascade feature, you'll need fewer switch ports, and also reduce your cable layout effort. Port redundancy can be used to build a backup path for video transmission in case the primary path is broken. SD Card for Storing Video Locally when the Network is Down The VPort 461 is equipped with an SD card socket (V2.0) for local storage purposes. Enable local storage to record events that occur when the network is down and the video stream cannot be transmitted. Transparent PTZ Control for Easy Control of PTZ Cameras The VPort 461 uses Moxa's Real COM technology to implement transparent communication for RS-232/422/485 PTZ control. The benefit of the Transparent PTZ Control function is that it eliminates the need to build the PTZ control driver into the VPort product, allowing the use of a legacy PTZ control panel or keyboard to control a PTZ camera directly.

8+2G all-in-one firewall/NAT/VPN/router/switch Build up secure remote access tunnel with VPN Protect critical assets by stateful firewall Inspect industrial protocol with PacketGuard technology Easy network setup with network address translation (NAT) RSTP/Turbo Ring redundant protocol enhances network redundancy -40 to 75°C operating temperature range (T model) ISA99 / IEC 62443 / NERC CIP compliance Check firewall settings with intelligent SettingCheck feature   Introduction The EDR-810 is a highly integrated industrial multiport secure router with firewall/NAT/VPN and managed Layer 2 switch functions. It is designed for Ethernet-based security applications in sensitive remote control or monitoring networks, and it provides an electronic security perimeter for the protection of critical cyber assets such as pumping/ treatment systems in water stations, DCS systems in oil and gas applications, and PLC/SCADA systems in factory automation. The EDS-810 series includes the following cybersecurity features: Firewall/NAT: Firewall policies control network traffic between different trust zones, and Network Address Translation (NAT) shields the internal LAN from unauthorized activity by outside hosts. VPN: Virtual Private Networking (VPN) is designed to provide users with secure communication tunnels when accessing a private network from the public Internet. VPNs use IPSec (IP Security) server or client mode for encryption and authentication of all IP packets at the network layer to ensure confidentiality and sender authentication. The EDR-810’s “WAN Routing Quick Setting” provides an easy way for users to set up WAN and LAN ports to create a routing function in four steps. In addition, the EDR-810’s “Quick Automation Profile” gives engineers a simple way to configure the firewall filtering function with general automation protocols, including EtherNet/IP, Modbus TCP, EtherCAT, FOUNDATION Fieldbus, and PROFINET. Users can easily create a secure Ethernet network from a user-friendly web UI with a single click, and the EDR-810 is capable of performing deep Modbus TCP packet inspection. Wide temperature range models that operate reliably in hazardous, -40 to 75°C environments are also available.

The VPort 66-2MP is a vandal-proof, IP66-rated, PTZ speed dome IP camera for use in harsh, outdoor environments. With a 360° endless PAN, -6 to 96° TILT and 22X, 30X, optical/20X digital zoom, H.264/MJPEG triple video streams, and day-and-night camera lens, the VPort 66-2MP is especially well-suited for outdoor video surveillance applications. In addition, the VPort 66-2MP supports NTCIP 1205, which is an ITS (intelligent transportation system) communication protocol standard. NTCIP support allows the user to control PTZ operation directly via the NTCIP-compliant control panel. Product Features -40 to 65°C operating temperature Maximum 1920x1080 resolution at 60 FPS (single stream) Supports 360° endless PAN and - 6° to + 96° TILT 22X, 30X optical zoom, and 20X digital zoom DNR, BLC, and image stabilizer for superb image quality Built-in 4.3 to 94.6 mm (22X) or 4.3 to 129 mm (30X) focal length lens with ICR (IR-cut filter removable) Triple video streams with H.264 and MJPEG IP66 rain and dust protection and NEMA Type 4X form factor NTCIP 1205 support for ITS system Calibrate PTZ movement manually or by schedule Smart PTZ tracking (Pending)

Smart remote I/O with Click&Go Plus Logic The ioLogik 2500 is a smart remote I/O product with unique hardware and software designs, making it an ideal solution for a variety of industrial data acquisition applications. The ioLogik 2500’s hardware design includes a 4-port unmanaged Ethernet switch and 2 serial ports, enabling the ioLogik 2500 to seamlessly connect to a variety of field devices. One of the Ethernet ports can be used to link to 8 daisy-chained ioLogik E1200 expansion modules to provide more than 100 channels. The ioLogik 2500 acts as the “head” unit, with Click&Go Plus logic used to control the entire I/O array. Most importantly, the ioLogik 2500’s single IP is all that’s required to connect the entire I/O array to your network, providing the perfect solution for industrial field sites that have an insufficient number of IP addresses. Product Features: New Click&Go Plus logic provides powerful front-end intelligence 4-port unmanaged switch built in for linking to Ethernet devices Optimized I/O expansion port for daisy chaining up to 8 ioLogik E1200 units 2 serial ports (RS-232/422/485) for connecting field devices Built-in datalogger supports an FTP server and microSD™ card with up to a 32 GB Transforms Modbus RTU into Modbus TCP or Active Tags Active communication with patented MX-AOPC UA Server Smart alarm management: Email, SNMP traps, TCP, UDP Wide operating temperature: -40 to 75°C (-40 to 167°F)

ExtendAir eMIMO Quad-Band Sub-6 GHz wireless bridge delivering double the throughput over longer distances at the industry's lowest cost With the ability to support quad-band operation and utilizing 2x2 MIMO and OFDM technologies, ExtendAir eMIMO (enhanced Multiple Input, Multiple Output) brings a new level of performance and reliability level to value priced wireless backhaul products that exceeds other carrier class license-exempt radio systems. All-outdoor ExtendAir eMIMO wireless bridges provide high throughput at extended ranges while OFDM allows for operation in Line of Sight (LOS), near Line of Sight (nLOS) and Non-Line of Sight (NLOS) modes. Standard 128-AES Encryption yields exceptional link security for data transmission. ExtendAir eMIMO utilizes Dynamic Frequency Selection (DFS) to automatically choose frequencies with minimal interference while providing radar detection and avoidance per FCC and European regulations. ExtendAir eMIMO delivers the lowest cost per Mbps, with the durability and ease of use that users have come to expect from Exalt.