Post Buy Requirement
EF
Ajman, United Arab Emirates
Add Review

Other Products / Services

GRP CHEMICAL TANK

Eissa Fiber Glass water storage tanks are produced with the help of rotational molding technique. The material used for manufacturing the tank is H.D.P.E (High Density Polyethylene). EFG chemical are made from the latest plastic raw material H.D.P.E. This material provides superior stress cracking and chemical resistance, unmatched low temp, impact and good toughness properties. The present H.D.P.E. is 100% improved virgin material. The world looks forward to the latest technology & best quality. Our tanks are used for aboveground applications for storage of chemicals such as HCL, NaOCl, NaOH, Cl2, H2SO4, etc.



Material Properties

  • Density : 0.939

  • Tensile Strength, at yield, 2% min : 2900

  • Flexural Modulus : 121000

  • Low Temp : 70

  • ESCR (100% LGEPAL, F 50) HRS >1000) Elongation, at Break, % 600

  • Heat Distortion Temp : 64


View Complete Details

POLYETHYLENE TANKS, PLASTIC TANKS

Eissa Fiber Glass has an excellent wing of experienced personal for making the moulds. So that the quality of the end product is in no doubt.We use SS and MS sheets for it mould making. With our innovations in the designs and the ability of our staff, we are able challenge all the factors of the conventional moulds such as shape, size appearance, heat transfer etc.



Specialities

  • High Quality: Polyethylene used is approved by food and drug administration.

  • Clean and Hygienic: Smooth inner layer resists the existence and prevalence of bacteria algae, fungus and enhances the portability of water. It also ensures no smell, no color and no taste.

  • No Temperature Fluctuation: The black middle layer resists the heat and the water in the tank remains cool and the specially designed outer layer (U.V-stabilizer) off-sets the ultra-violet rays.

  • No rust No Corrosion: Raw material used in the manufacturing ensures corrosion free and rust free storage.

  • Leak Proof: Single piece molded body ensures, no joints, no leakage and 100% maintenance free water storage.

  • Strong and Secure: Special circular and vertical ribs ensure the resistance against the environmental stress and high liquid pressure, i.e. there will not be any cracks in the body, and ensures long life.

  • Easy to Install and Highly Adaptable: Lightweight tanks are designed for easy handling and Installation. It is not only convenient to handle but also adaptable to different application such as in Households, Irrigation, Institutions and Factories etc. and suitable for overhead and underground applications.

  • Available in many Sizes: Eissa Fiber Glass Tanks are available in the range of 100 gallons to 5000 gallons so that it can satisfy every ones needs.

  • Supply with Valves: Outlet, Inlet, and overflow and Drainage valves. (According to users requirements).


View Complete Details

GRP Handrail Systems

Combining corrosion resistance, long life and a low maintenance design, GRP handrail systems are superior to conventional metallic systems. Components are light weight and easy to fabricate. Eissa has the capability to design, manufacture, fabricate and install a wide range of handrail projects, from the smallest platform to massive, complex structures.A well versed in all phases of FRP handrail mounting conditions, end and special connections, provides the Eissa customer with accurate, concise drawings that meet both the specifications of the project.

View Complete Details

Fiberglass Reinforced Plastic Pipes

In EFG, different types of resins are used for the manufacturing of RTRP (Reinforced Thermosetting Resin Pipes), which are selected according to the required properties like chemical resistance, temperature resistance and mechanical properties. The properties of FRP (Fiberglass Reinforced Plastic Pipes) can be varied by changing the ratio of the raw materials. Glass fibers provide strength and stiffness to a composite material. According to the type of resin used, FRP pipes can be classified as; GRP - Glass Reinforced Polyester (Iso-phallic resin) GRV - Glass Reinforced Vinyl ester (Vinyl ester resin) GRE - Glass Reinforced Epoxy (Epoxy resin)

View Complete Details

Lamination Joint System

This is a restrained joint system used for joining plain end pipes which consists of overlapping layers of fiberglass reinforcement thoroughly impregnated with the resin to achieve the specified width and thickness. It provides continuity in both hoop and axial directions. It is generally preferred for field adjustments and repair work where no other joint systems can be used. This joint is also called butt and strap joint and it results in high strength and requires skilled labor. Once the core pipe is laminated and tested successfully, jacket pipe cut to exact length to fit in the joint area is installed. This jacket pipe piece is laminated with the main jacket pipe by the same procedure. A nozzle is made on the jacket pipe to carry out the air test and subsequent injection of poly urethane foam. This type of joint is applicable for all the available pipe sizes.

View Complete Details

GRP Fiber Glass Lining

Eissa Fiber glass lining is being recommended by Consultants for Godowns, Tanks, Mild Steel Containers, and Pipe Lines etc for the following reasons Weather Proofing Protection from humidity, moisture, fungi, insects & bacterial growth and biological degradation in the container. It does not rust, rot, corrode or swell. Extra Thermal and Electrical insulation and fire resistance can be incorporated, if required. Resins are also available to suit lining for storage of Food, Oils, Petroleum and Strong Chemicals. Fullest utilization of space and no chance of spillage, leakage or any sort of wastage of stored material. Longer life of lining and stored items is guaranteed by virtue of resin quality. Ease of Maintenance, Cleaning and Repair Normally the lining consists of two layers of chopped mat hardened with Polyester Resin followed by a thick layer of Gel coat giving a thickness of approx. 2.5mm. Thickness can be varied as per specifications subject to the quality and life of protection required. The materials used namely resin and fiberglass mat are the most advanced in todays technology and imported from only reputed manufactures all over the world.


Manufacturing GRP Lining Specifications

  • Rough the surface to remove all smut materials and prepare for the adhesion of lamination

  • All the corners to be covered by using GRP putty before applying the GRP Lining.

  • Apply primer resin Iso-phallic on the surface.

  • Resin content 60-70% by weight to assist reinforcement

  • E-glass surface mat (450gm/m2) or synthetic fabric reinforced layers are used consisting of approximately 90% resin by weight. Thickness of the reinforced layers is generally 0.5mm.This provides a protective barrier against corrosion.

  • Eissa Fiber Glass is one of approved GRP lining manufacturer in this field

  • All glass fiber used as fiberglass reinforcements shall be type E glass

  • Guaranty provided for any manufacturing defects

View Complete Details

VTH1510AH - 7inch Color IP Indoor Monitor

  • SKU: VTH1510AH
  • Brand: Dahua
  • Weight: 1, 500.00 Grams
> 7'TFT LCD, resistive touch screen resolution, resolution 800*480;
> 5 mechanical button
> 1 channel 10100Mbps self-adaptive Ethernet
> To communicate with other residents in the same community
> Info publish, leave message, emergency calling
> Support DND setting and multiple outdoor station connection
> Support video recording function
> Support outdoor station and IPC monitor;
> 24V power supply
> Support POE power supply
View Complete Details

GRP Handmade Ladder Systems

EFG had combining corrosion resistance, long life and a low maintenance design; Dynarail, handrail and ladder systems are superior to conventional metallic systems. Components are light weight and easy to fabricate. Savings on labor and equipment often make the total installed cost of Dynarail comparable to that of steel. Combining its low cost of installation with low maintenance and long life, Dynarail offers a life cycle cost that is significantly lower than that of its counter parts.


Features



  • Corrosion Resistance- The use of premium grade, Iso-phallic polyester or vinyl ester resin systems and synthetic surfacing veil maintains structural integrity.

  • Slip Resistance a ladder rungs include heavily serrated flutes for positive, slip -resistant footholds; also un-gritted rungs are easy on the hands, while still providing safety.

  • Lightweight Yet Durable - less than one-half the weight of steel allowing easy installation with no heavy equipment and less manpower required.

  • Fire Retardant a flame spread rating of 25 or less, when tested in accordance with ASTM E-84; meets the self-extinguishing requirements of ASTM D-635.

  • Low Maintenance a corrosion resistant and requires no scraping, sandblasting or painting.

  • U.V Protection - UV inhibitors included in the resin formulation, along with a surfacing veil for optimum protection from the effects of weathering (An optional UV coating is recommended for installations with intense UV exposure.)

View Complete Details

GRP Safety Cage Ladder System

  • Maximum length without splice. 24, -0”
  • Maximum ladder length with cage. 33, -6
  • Inside Diameter of rung 7/8”

Easily assembled on site, EFG had Safety Ladder Systems to meet or exceed OSHA requirements. Though less costly than prefabricated ladder systems, these safety ladders provide a custom fit to the supporting structure. Ladders are stocked in standard heights of 8, 10, 12, 14, 16, 20, and 24 are available in taller heights using splice kits. Ladders may be ordered with or without safety cage kits.



Special Features

  • Safety First: Safety features are built in from the ground up. Special clip angles have been developed to securely anchor the ladder. Intermediate stand-off brackets laterally stabilize the ladder to the supporting structure on 6 centers. Ladder rungs include heavily serrated flutes for slip-resistant footholds.

  • Durable GRP Construction: Standard handrail ladders and cages are manufactured with vinylester yellow structural shapes. This creates a light-weight ladder system offering long life and low maintenance service.




Technical Data













































Maximum length without splice. 24, -0
Maximum ladder length with cage. 33, -6
Clear inside width (inside rail to rail). 18
Outside width (outside rail to rail). 21-1/2
Rung Spacing (center to center). 12
Outside Diameter of rung. 1-1/4
Inside Diameter of rung. 7/8
Rail-outside width. 1-3/4
Rail-wall thickness. 1/4
Weight per foot (approximately).

2.7 Ibs




Advantages

  • In addition to handrails, standard ladder cage configurations, special details can be custom fabricated. These include single or double side dismounts to platforms, special stand-off distances, self-supporting returns and handrail connections for additional worker safety




View Complete Details

Fiber Glass Structural Shapes

Fiberglass structural shapes from Eissa Fiber Glass are used in wide range of applications, providing a unique combination of corrosion resistance, high strength, dimensional stability and light weight, along with thermal and electric non conductivity.
Durable shapes provide years of low maintenance service in areas where steel, aluminum or wood components were traditionally specified. Today, these shapes are often used in highly corrosive applications where stainless steel and other expensive components were once required. These structural shapes are produced from the highest quality materials, providing durability and years of low maintenance service.

View Complete Details

GRP Canopy

Specifications

  • Usage:Sunshade or Protecting Equipments from Sun rays.

  • Material used:GRP (Fiberglass).

  • Type:Rectangular with Curve in shaped.

  • Dimensions:Size: 1300 mm x 800 mm x 150 mm.

  • Drawing:As per approved and attached drawing.

  • Finish:Internal Surface Smooth gel coat mould finish.

  • External surface top coated wax added rough finish.

  • Color:Beige.

  • Thickness:For Curve shell: 7 mm thick.

  • Flanges:15 mm thick.

View Complete Details

Baffle Ceiling System


Specifications

GRP Multiflo Covers are meant to be used as reinforcement material in plastic industry, Glass fiber Reinforced Plastics etc.Often GRP is the ideal material to manufacture baffle walls in tanks. By careful design and incorporation of stiffeners as required GRP can be used very successfully to make strong, corrosion resistant baffles for easy installation in new or existing concrete tanks. The baffle wall utilizes the benefits of glass reinforced fiber. The walls consist of individual glass reinforced plastic (GRP) corrugated panels that span from wall to wall overlapping each other to create a wall of almost unlimited height with adjustable top and bottom levels. The baffle is fixed to the concrete wall using slotted and bushed fittings which accommodate movement due to differential deflections that occur on concrete walls during filling and temperature changes. The GRP baffle walls are suitable for tanks spanning up to 9m wide, are quick and easy to fit to a fully constructed tank and easy to remove and reposition.


View Complete Details

GRP CYLINDRICAL MOLDED WATER TANK

20, 000 U.S GALLON GRP CYLINDRICAL WATER TANK
EFG make fiberglass potable and industrial water tanks are high quality standards, which are manufactured. They are strong, durable and can resist any bacterial algae and fungus to provide clean drinking water. EFG tanks are made of best quality food grade polyester resin. These tanks are available from a wide range of capacity. The water tanks are manufactured under strictly hygienic conditions and are designed to ensure that there is no accumulation of dirt, dust and algae formation on the contact skin of the tank with water. EFG make tanks are not affected by ultra violet rays and have excellent weathering properties and easy maintenance.



Specifications
The following manufacturing specifications are generally followed by Eissa Fiber Glass LLC".

  • Gelocat of 0.5mm thickness to provides chemical resistance. Our general color of gel coat is white. Any other color if required, available on request.

  • Resin content 60-70% by weight to assist reinforcement for chopped strand mat.

  • Resin content 45-55% to provide strength and rigidity for woven roving.

  • E-glass surface mat (450gms/m2) or synthetic layers are used consisting of approximately 90% resin by weight. Thickness of the reinforced layers is generally 0.5mm. This protective barrier against corrosion.

  • Gelcoat finishing on outside the tank.

  • For joints provided GRP putty and chopped stand mat cover with Gelcoat.

  • Structure of the tank includes 1mm thick Gelcoat interior finishing, a surface mat is provided to protect inner coating. Adequate layers of fiber-mat and woven roving layers will be applied according to the thickness using required resin and chemicals to suit the usage of tank. The cover coat will be given with waxed coating to get clear look.

  • The external surface of tank is top coated with wax added UV top coat polyester resin. Tank body (Laminate) thickness is manufacture by using UV resistance polyester resin. These provided UV resistance to the tanks.

  • Tanks have special layer inside the tank wall using vinylister resin with fiber which provides protection as a chemical resistance.

  • After building up the tank wall layers of fiber glass chopped strand mat impregnated with polyester resin applied. Further laminations are built on this special layer to complete the tank wall thickness.

  • Tank includes inlet, outlet, overflow, grain, vent and manholes. All tanks will have provisions for fixing standard connectors .Connectors will be provided along with tank only on request.




Features

  • Smooth finish to prevent Algae Growth.

  • Fully cured to prevent styrene emission.

  • Low thermal Conductivity.

  • Sound Structural Properties.

  • Flexible in size, shape and capacity.

  • Preferable for local conditions.

  • Repairable.

  • Ultra Violet Ray Resistant.

View Complete Details

GRP SEWAGE TANK

In EFG, GRP Sewage tanks for sewage treatment are manufactured with two chambers, the first offering primary settlement of wastewater and sewage, and the second allowing further settlement before discharge of treated water, usually into a soak away.




Technical Specifications

  • Choice of inlet/outlet pipe work configurations.

  • Full specification and discharge consent advice, as well as information on environmental regulations available from the under team of technicians.


In City Lamination over concrete surface of Sewage Tanks will be done by adopting following methods.



View Complete Details

GRP DIESEL TANK

These tanks are specially made to withstand chemical resistance. Also available in various capacities from200 U.S Gallons to 20000U.S Gallons. These tanks are leak proof, corrosion and rust free.


Method of specifications

  • Usage: Storage of diesel.

  • Type: Circular Horizontal.

  • Capacity & Dimensions: As per our Drawings.

  • Finish: Internal Surface Smooth gel coat mould finish.

  • External surface top coated wax added rough finish.

  • Color: Black Pigmented.

  • Manhole & Cover: Built-in GRP Manhole Frame with GRP Manhole Cover. Size: 500mm Dia. The GRP Manhole Cover is heavy duty.

  • Top Hat Ribs: Tanks have built-in GRP top hat ribs. These ribs provide additional strength and resist deformation. No internal stiffeners are used.

  • Pedestals: GRP pedestals are externally laminated to the tank body. GRP pedestals are separately molded and are strong enough to support the weight of the tank. As the pedestals are externally laminated to the tank body, the tank can be completely drained out.

  • Fittings: Tanks have special strengthened areas for fittings as built-in shape as part of the tank. Tanks are provided with overflow, drain supply and delivery fittings. The fittings are of UPVC. The size of the fittings is specified in our drawing, as per the capacity of the tank. The tank shall have 2 Nos UPVC Air Vents for air ventilation.

View Complete Details

GRP CAR PARKING SHED

EFG had manufactured different types of Car sheds as per customers requirements.



Specifications

  • Design: As per drawing

  • Thickness: 4-5mm GRP

  • Finish: Smooth glass finishing inside & smooth gel-coat finish on outside

  • Color: White pigmented color or any other color as per your requirement

  • Materials of Construction: Iso-phthallic Polyester gel-coat two coats reinforced with fiberglass surface tissue C glass would form the surface of GRP roofs. This would provide good looks and smooth decorative finish. All raw materials used in purchased from leading companies of the world and they conform to the relevant specifications. Polyester resin- BS 3532, Fiberglass- BS 3496.

  • Roof: GRP Roof Thickness would be built up using layers of fiberglass chopped strand mat.300gm/m2 and 450 gm/m2 E-glass impregnated with ortho-phthallic polyester laminating resins

  • Pillars: 75mm diameter GI pipes are used as our standard pillars. But 100mm diameter pillars are available upon request. The height of the pillar depends upon the site conditions and location. All pillars would be primed and painted with alkyd based enamel paint. Epoxy pain is available upon request. GI nuts bolts & washer used for fixing shall be of M-10x40mm

  • Foundation: Cement Concrete footing of size-40x40x50mm provided for foundation

  • Base Plate: 200x200mm size mild steel plate of 8mm thick used as base plate


View Complete Details

GRP Corrugated Sheet

Eissa Fiber Glass GRP or Glass Fiber is a low cost, low maintenance, long lasting and versatile material capable of a wide variety of uses. Due to the fact that it is extremely light, fire resistant, and also extremely strong, it is ideal for use in vehicle conversions.


Technical Specifications



  • Usage: Roofing

  • Material used: GRP (Fiberglass)

  • Type: Rectangular with Corrugated in shaped

  • Dimensions: Size: 4 x 10

  • Thickness: 2.5MM

  • Finish: External /Top Surface Smooth gel coat mould finish

  • Internal surface top coated wax added rough finish.

  • Color: As per clients requirement

View Complete Details

Grp Kiosks

Eissa Fiber Glass had infinite range of GRP Kiosks offer a purpose built, economic solution to equipment or personnel housing requirements. Designed specifically to meet customer requirements, GRP kiosks provide a long term solution too many industrial and indeed commercial applications. Our unique manufacturing methods allow us to construct GRP kiosks up to 50m in length, 12m in width and approximately 6m high. For larger GRP Kiosks, multiple panel design configurations are utilized to overcome mould restrictions.



Structural Design

All GRP kiosks are designed in accordance with current legislation and European and British standards.


View Complete Details

Fiberglass Floor Plate

Floor Plates are manufactured by up multiple layers of fiberglass reinforcement and specially formulated resins. The result of this process is a composite panel offering both by directional strength and corrosion resistance. These designed products are non-porous and are easily cleaned by high pressure washer and can withstand cleaning solutions.

View Complete Details

5000 IGuard Super Master Server

  • Brand Name iGuard
  • SKU iG-SM-5K
  • Weight: 5, 000.00 Grams
Guard SuperMaster


Master unit for LM520-FOSC FSC SC
5000 users
True TCPIP based
Built-in Database Server
Unlimited Master Slave Data Synchronization
Built-in Web Server
View Complete Details

IGuard Super Master Server 10000

  • SKU iG-SM-10K
  • Brand: iGuard
  • Weight 5, 000.00 Grams
Guard SuperMaster


Master unit for LM520-FOSC FSC SC
10000 users
True TCPIP based
Built-in Database Server
Unlimited Master Slave Data Synchronization
Built-in Web Server
View Complete Details

IGuard Super Master Server 20000

  • Brand Name iGuard
  • SKU iG-SM-20K
  • Weight: 5, 000.00 Grams
iGuard SuperMaster


Master unit for LM520-FOSC FSC SC
20000 users
True TCPIP based
Built-in Database Server
Unlimited Master Slave Data Synchronization
Built-in Web Server
View Complete Details

GRP Cabinet & Enclosures

Comprehensive range of GRP Cabinets and Enclosures up to the customer requirement suitable for Indoor and outdoor installations. All enclosures are completely finished in plant prior to dispatch. The enclosures will have smooth mould finish externally and coated hand layup finish internally.








Standard Features



  • Stainless Steel / Brass hinges.

  • EPDM Gasket / PVC Foam seal.

  • High Impact Resistance.

  • Thickness : 6mm at stressed points and 4mm elsewhere.

  • Smoothing glossy finish externally.

  • UV resistant & opaque.

View Complete Details

Cladding Pannels & Columns

Eissa Fiber Glass GRP or Glass Fiber is a low cost, low maintenance, long lasting and versatile material capable of a wide variety of uses. Due to the fact that it is extremely light, fire resistant, and also extremely strong, it is ideal for use in vehicle conversions.

View Complete Details

VTH1510AS - 7inch Color IP Indoor Monitor

  • SKU VTH1510AS
  • Brand: Dahua
  • Weight 1, 500.00 Grams
Display :Color 3.5 inch TFT LCD screen , resolution 320*240
> 4 mechanical button
> Support 4 wire alarm input extension
> Support call among households
> Support multiple outdoor phone connection
> Support Do-not-disturb function
> 1 channel 10100Mbps self-adaptive Ethernet
> Dimensions for DH-VTH1110A : 205 mm * 135 mm * 23 mmW*H*T
> Dimensions for DH-VTH1110B: 189mm*115mm*19mmW*H*T
> Power: DC 1015V
> Power Consumption: Standby Support monitoring, video talk, unlock function
> Support Information Search, can receive Message from guard office
> Compatible to up to 4 security sensors( burglar, fire, gas leakage, etc)
> Directly notice to guard office for emergency
View Complete Details

GRP Handrails

Combining corrosion resistance, long life and a low maintenance design, GRP handrail systems are superior to conventional metallic systems. Components are light weight and easy to fabricate. Eissa has the capability to design, manufacture, fabricate and install a wide range of handrail projects, from the smallest platform to massive, complex structures.A well versed in all phases of FRP handrail mounting conditions, end and special connections, provides the Eissa customer with accurate, concise drawings that meet both the specifications of the project.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Eissa Fiber Glass LLC (Eissa Fiber Glass LLC)
  • Eissa Fiber Glass LLC (Head Office) P.O Box 1157, Ajman United Arab Emirates, United Arab Emirates
  • Share us via