Elji International LLC Sharjah

Rubber Sheets   Application: Rubber sheets are available in different materials that are capable of serving different applications. Types: EPDM Sheets: It has outstanding resistance to aging, weathering, ozone, oxygen and many chemicals. It’s high and low temperature stability as well as steam and water resistance is excellent. Neoprene Sheets: It is the world’s first synthetic elastomer with oil resistance and is still the primary choice in a number of applications, including automotive and construction. In the automotive world, Neoprene remains the choice for many under hood and underbody parts that require a reasonably priced, mid-performance polymer. NBR Sheets: It provides excellent resistance to petroleum oils and gasoline as well as mineral and vegetable oils. However, NBR has poor resistance to the swelling action of oxygenated solvents such as acetone and ketones. It has good resistance to acids and bases except those having strong oxidizing effects. Butyl rubber Sheets: These has exceptionally low gas and moisture permeability and outstanding resistance to heat aging, weather, ozone, chemical attack, flexing, abrasion and tearing. Silicone rubber Sheets: It offers stability over a wide temperature range, resistance to harsh environments, and long lasting performance exceeding many organic elastomers. Silicone rubber offers incredible resistance to extreme temperatures, being able to operate normally from minus 100°C to plus 250°C. Electrical Insulation rubber Sheets: This is used in power rooms, control rooms where people work with high voltage electric line. Available in one side rib design and other side rough finish. Can also be supplied in both side rough finish. Every M2 of this mat is tested for specified voltage for working and test certificate issued accordingly. Dimension: Thickness                     :           1.0mm to 50 mm Standard width            :           1000mm to 1400mm Length                         :           5mtrs to 15 meters (Depending on Roll Thickness)

Fenders are used to prevent damages by absorbing the kinetic energy at the time of impact. Fenders find major application in marine industry to protect yachts, boats and ships like marine vessels and piers, pilings and docks like berthing structures. They are made to withstand harsh operating conditions in automobile and marine industry. Fenders have applications in marinas, harbors, shipbuilding and maritime transportation. Types: Arch fender (V, W – shape) Floating Buoy Cylindrical fender Square Fender Triangle shape fender D – shape fender Fender face rubber Corner rubber fender Materials:   High Impact Resistance SBR+NR, EPDM & Neoprene Dimension: In addition to the standard dimensions, fenders are available in custom sizes.       TECHNICAL SPECIFICATION SHEET

Elji’s coloured EPDM granules are made from a compound of EPDM rubber, specialist pigment and UV stabilizers. Blocks of the rubber compound are produced under carefully controlled factory conditions which are then granulated at high speed. Dust is removed at every stage to ensure the finished granules are as clean as possible. Throughout the process, thorough testing ensure that the chemical and physical properties are of consistently high quality. Elji’s coloured EPDM granules are produced from selected scrap EPDM rubber, derived mainly from the automotive industry such as rubber window seals, linings, tubing etc. The scrap is then recycled by means of ambient grinding, the process being designed to remove any contamination and dust to ensure clean high quality finished granulate. Regular sieve analysis ensures consistent material sizing. Key Benefits: Through coloured epdm granules maintain surface colour during wear. Angular granules provide excellent drainage (EPDM Graded to 1.0-4.0mm) High elasticity and wear resistance (Elongation at Break ≥ 650 %, Tensile Strength > 6.0 Mpa) UV resistant properties (Grey Scale 3-5 dependent on colour) Low density for excellent coverage (1.60 ± 0.05 g/cm³) Minimum EPDM content > 20% Non toxic Packing: Supplied in 25kg polythene bags shrink wrapped on pallets. Main Applications include: Wearing layer for children’s playgrounds, onto an engineered sub-base or onto Elji. Top layer for athletics tracks and multi-use games areas. Swimming pool surrounds. Walkways and landscape areas. Driveways Raw material for moulded products.

Application: Corner Guards are designed to protect the edges of columns in structures, corners and entrances by providing superior impact protection to both vehicles and buildings. These are available in black color as well as with color strips on both sides of the wings. Types: GI Clip Back up Type Glue Type Materials: High Impact Resistance SBR+NR, EPDM & Neoprene and Vinyl Dimension: Size 50mm X 50mm 50mm X 50mm 65mm X 65mm 75mm X 75mm 90mm X 90mm 100mm X 100mm 120mm X 120mm   Length 1.00 m and 1.20 m Length can be customized as required by the customer.  

These protective wall guards are used throughout healthcare facilities, schools & universities, elder care & child care facilities, in offices to protect walls, to protect doors, to protect cabinetry or to protect walls and backsplashes in back of house areas in the hospitality industry.