Other Products / Services #6250206

Housing: aesthetic aluminum frame, no change of color over time- Diffuser: even distribution of lights, without formation of lighter or darker spots- Installation: built-in / pendant kit available- Long life: 15000 hours

Application areas:

- Residential buildings- Commercial buildings- Administrative buildings- Banks- Hospitals- Schools

Benefits:

- Completely replace traditional fluorescent lighting- Safety, low voltage operation- Installation options: suspended ceilings, artificial walls, pendant mounting- Emit a very pleasant and even light with very low glare factor due to the diffusion lens- Low power consumption- Repeated switch-on/off does not affect the lifespan of the LED panel- Instant light with maximum luminous flux- Environmentally friendly - do not emit mercury and lead (RoHS Directive)- No ultraviolet and infrared rays- Resistant to shock and vibration

Housing: aluminum body- Colour of the housing: grey- Resistance: -40C +65C- Long life: 30000 hours

Application area:- Sports halls- Commercial areas- Warehouses- Production facilities- Squares- Fleets- Parking lots

Benefits:- Efficient replacement of traditional halogen and metal-halide floodlights- Wide distribution of even and stable light- Economic- low power consumption- Repeated switch on/off does not effect the fixture lifespan- Instant light at maximum luminous flux- Environmentally friendly - no mercury and lead- No ultraviolet and infrared rays- Resistant to shock and vibration stable body- Voltage supply fluctuations do not affect the normal operation of the floodlights

Direct mounting to the load- IP code: IP 00- Porcelain/dielectric alloy- Ambient temperature: - 5 to +55

Mounting:

- Via bolts to the mounting plate

Standards:

EN 60269-2EN 60269-1IEC269-2

Standard:EN 60269-2;IEC269-2EN 60269-1

Mounting: to a flat surface using bolts

Advantages:- Resistant to high voltages- Option for moving the handle on the front panel of the board- High mechanical endurance and wear resistance- Not affected by the frequency variations- Reliable and secure control- Long life

Functions:- For mounting in main electrical boards for breaking of the circuits- Manual switching between two power supplies- Switching ON of generators- Used as main switch

Applications:- Industry- Administrative and public buildings- Building construction

Standards:N 60947- 1EN 60947-3

Mounting: vertically on a flat surface using bolts

Advantages:- Selection between device with integrated and separated controller- Option for setting the change-over time between the two sources min 3s- Option for automatic switch-over to the main power supply source after restoring its parameters- High reliability, safety and long life

Functions:

- Provide continuous power supply and two electrical sources automatic switch in case of failure or deviation from the set parameters- Control the status of the circuit parameters:presence of the three phaseslimits of the phase voltageoverloadshort circuit at the output- Switching to dual power change-over at power supply phase lack- Breaking of electrical circuits and control of powerful consumers- Main breaker in housing or industrial distributing installations supplied with a generator or with a second power supply source

Applications:

- Administrative and public buildings-hospitals, military sites, control rooms- Industry-productions requiring continuity of the process- Generators

Standards:EN 60947-1 EN 60947-2 EN 60947-6-1

Technical characteristics:

- Rated current: from 9A up to 225- Rated operating voltage of the controlling coil: 12V DC to 230V DC- Rated operating voltage of the power circuit: up to 690V - Insulation voltage: 690V - Surge voltage wear resistance : 8000V- Electrical wear resistance (number of cycles): 1 000 000- Mechanical wear resistance (number of cycles): 10 000 000- Number of cycles per hour: 1200pcs up to 32; 600pcs for 40-95- Ambient temperature: -1060- Maximum altitude: 2000

Mounting:on a DIN rail or using screws to flat surface in a vertical position with maximum incline of 5

Advantages:- Material: resistant to UV rays, self-extinguishing- High reliability of the current parameters- Suitable for using in highly contaminated operating environment- Secure separation of the power contacts- Easy mounting- Long life- Suitable for frequently switching ON/OFF consumers

Functions:- Switching ON/OFF of alternating current consumers in direct current controlling schemes- Implementation of consumer control management

Applications:- Industry- Transport- Telecommunications

Standards:EN 60947-1EN 60947-4-1LVDEMC

Technical Characteristics:

- Model: CJ19-43

- Rated current: 32A/40A/65A/95A/115A/150A/170A- Operation class: AC6- Insulation voltage: 690V- Rated operating voltage of the coil: 230/400V C;50/60Hz- Surge voltage wear resistance:8 000V- Electrical wear resistance 300 000 cycles- Mechanical wear resistance 1 000 000 cycles- Number of cycles per hour: up to 600 switchings- Number of contacts :3NO power contacts+1NO operative- Leking Power: up to 13W- Operating temperature: -10C+60C- Maximum altitude: 2000

Mounting: DIN rail or using screws to a flat surface in a vertical position with maximum incline of 5

Advantages:- Material: resistant to UV rays, self-extinguishing- High reliability of the current parameters- Secure separation of the power contacts- Secure part of the contactor against contact with the consumer- Manual switching on is not available

Functions:- Switching on/off of capacitors for reactive energy compensation - Developing of systems for compensation of reactive energy- Lowering of peak transitional currents at switching on and switching off the capacitors

Applications:

- Industry- Administrative and public buildings

Standards:EN60947-1EN60947-4-1LVDEMC

Mounting:on a DIN rail/vertical position with maximum incline of 5

Advantages:

High reliability of the current parametersSecure switching on or separation of the power contactsCompact sizesLow levels of operational noiseOptions for selection ot the type of power contactsResistant to UV rays

Functions:

Switching ON/OFF of electrical circuits under loadDeveloping of systems for control of consumersOperational element in control boards

Applications:

IndustryAdministrative and public buildings

Standards:EN 61095EMCLVD

Number of contacts: 3 NO power contacts +1NO operating(for contactors over 40 there is also auxiliary 1NC contact)- Electrical wear resistance (number of cycles):1 000 000- Mechanical wear resistance (number of cycles):10 000 000- Number of cycles per hour: up to 600 switchings- Ambient temperature : -1060- Maximum altitude: 2000m

Mounting:on a DIN rail or using screws to flat surface in a vertical position with maximum incline of 5

Advantages:

- Material: resistant to UV rays, self-extinguishing- Switching ON of electrical motors in one direction of rotation and turning (reversing) of the rotation direction at outside command.- No option for simultaneous switching ON of the two contactors in the group due to mechanical interlock- High reliability of the current parameters- Secure separation of the power contacts- Easy mounting- Long life

Functions:- The contactor is used for reverse control of inductive motor with short circuited rotor.- Developing of control systems

Applications:

- Industry- Services

Standards:EN 60947-1EN 60947-4-1EMCLVD

Output discrete control signal 24V

- Output analogue control signal: 0-10V

- Sliding compensation: from 0 to 20%

- Ambient temperature : -1060

- Maximum altitude: 2000m

Mounting:

- to a flat surface using screws

- mounting position vertical with maximum incline up to 5. When more than one inverter is mounted in a board it is recommendable to mount them next to each other, and when this is not possible, proper cooling of devices should be provided.
Advantages:- DC - brake in static mode

- Dynamic breaking with external breaking resistor used in inert electric motor load

- Output voltage setting option

- Option for activation of output safety functions

- Rotation speed increase automatic and manual

- Adjustment of the V/F control curve linear or quadratic

- Omission of resonance frequencies

- JOG function

- counter function

- Automatic restart option in case of power supply failure

- 15- speed degrees control option

- Selection of control from the control panel; external or COM terminal

- Frequency control from the control panel, external potentiometer by current or by voltage

- Input signals on clockwise or counter-clockwise rotation, multi-step control, restart, etc.

- Function extending option: by including of additional modules
Functions:

Control of three phase inductive motors with a short circuited rotor Applications:

Industry-conveyors, packing and lifting machines, mixers, pumps, compressors
Standards:

- EN 60898-1

- EN 60947-2

- LVD

- EMC

Mounting:via screws with sizes M12 and 16 to flat horizontal surface

Advantages:

- Used for correction of the power factor- Compensation of reactive energy- Reliable work- High overload resistance- Long life

Functions:

- Systems with high levels of harmonic distortion- Compensation of the reactive energy
Applications:

- Public buildings- Industry- Wind turbines

Standard:EN 60831-1EN 60831-2

Mounting:on the front panel of a board after an opening is cut

Advantages:

- Indication and setting parameters like power factor- Real time showing of many system parameters- Options for selection of manual and automatic operating mode - Indication of overvoltage or lack of voltage- LED indication of displayed parameters and outputs in operation- High level of security of data- Easy programming- Secure control of the outputs

Functions:- Control of capacitors systems with 12/16 controlling outputs

Applications:- Industry- Administrative and public buildings

Battery for programme storing: up to 10 years- Power consumption: < 3VA- Mechanical wear resistance: 10⁷cycles- Operating temperature: -5 - +40- Humidity: 35 - 85%RH- Commutation capacity: relay output with active load: up to 3A- Weight: 120g

Mounting:- on the front panel- size of the opening 4545

Standard:EN 61010-1

Technical characteristics:- Direct power consumption measurement: up to 5(45), 50/60Hz- Automatic temperature compensation- LED indicator for phase voltage- Indication for wrong cable connection- Indication for wrong measurement- Precision class: 1- Number of tariffs: 1- Meter constant: 1000 (imp/kWh)

Adjusted to measure:direct current (AD, DV) valuesalternating current (AA, VA) values- Input signal:Operating as voltmeter : 2-700V (the range is adjusted from inside)Operatind as amperemeter: 5-2000 (the range is adjusted from inside)

Note: At current range over 5A a current measurement transformer should be used

Mounting:- DIN rail

Standard:EN 61010-1

Power indicator

Control of pumps with power up to 1 W

Mounting:- To a flat metal or plastic surface with thickness: max 4m- Size of the opening: 22.5mm

Standards:EN 60947-1EN 60947-5-1

Resistant to UV rays plastic

Mounting:- DIN rail

Standard:EN 60947-1EN 60 947-5-1

Type of buttons:one-speed and two-speed- Number of contacts: according to the number of the buttons- Commutation capacity: up to 6- Resistant to UV rays plastic- IP code: IP65- Weight: according to the number of contacts

Mounting:- Directly to the control cable of the crane

Warning lights are offered individually in yellow, green and red colours, and thewarning towers in a combination of up to 5 colours: green, yellow, red, blue andwhite.

The distribution boxes are designed for mounting in newly built buildings or buildings in reconstruction.They are a module box with mounted protective devices of the given flats electrical current circuitcircles. They are supplied with transparent door for each row opening upwards to 90. They are made ofwhite self-extinguishing plastic, resistant to heat and high temperature with IP code: IP 40. The mounteddevice in the box is protected from direct contact to the current leading parts. They are offered withDIN-rail for device mounting and terminal strips for the neutral and earthing conductor joining. Mounteddirectly on the walls with screws.

Double rows for 16; 24 and 36 modulesMaterial: ABS for body and PC for doorFire resistance: 360C/30s

Documents corresponding to the product:Standard EN 60670-24

Plastic distribution boards of various sizes. Intended for extension or distribution of cable lines. They can also be
used as meter boxes. They are resistant to chemical agents, thermal and UV rays.

Recyclableadjustable mounting plate position

MOUNTING:Vertically on flat surface

(short circuit duration up to 5 sec.)

Nominal voltage Uo/U- 0.6/1 kV

Test voltage: AC-4 kV/50 Hz

Construction:

Solid or stranded Cu wires cl. 1 or cl. 2 acc. to DIN VDE 0295

Insulation: PVC compound

Inner sheath: filling compound

Outer sheath: PVC compound

Outer sheath colour: black

re - round solid

rm - round multi-core

sm - sector multi-core

se - sector solid conductor

Applications:

Power cable for construction of underground distribution grids and installations of industrial and public projects, where mechanical damages are not to be expected. Suitable for transmission and distribution of electric power at nominal voltage u0/u 0, 6/1 kV.

Standarts:

DIN VDE 0293-308 - Colour coded acc

DIN VDE 0276 part 603 or HD 186

DIN VDE 0295 - Wire class acc

Construction:

• Flexible Cu-wires, cl. 6 acc. to IEC 60228
• Flat conductor acc. to BDS IEC 60227-5
• Insulation: PVC compound
• Insulation colour: white or black-red

Applications:

Designed for connection of electrical appliances to the electrical grid, for connection of mobile users, devices and appliances.

Standarts:

Flat conductor acc. to BDS IEC 60227-5

Flexible Cu-wires, cl. 6 acc. to IEC 60228

Construction:

Solid Cu wires cl. 1 acc. to DIN VDE 0295, IEC 60228

Insulation: PVC compound

Insulation colour:

- yellow-green: available cross sections from 0.5 to 10 (mm)

- white: available cross sections from 0.5 to 4 (mm)

- black: available cross sections from 0.5 to 10 (mm)

- blue: available cross sections from 0.5 to 10 (mm)

- brown: available cross sections from 0.5 to 10 (mm)

- red: available cross sections from 0.5 to 10 (mm)

Applications:

For fixed installation in lighting networks, electric power installations, wiring of electrical switchboards, machines and equipment.

Standarts:

Conductor acc. to HD 21.3 S3, DIN VDE 0281 part 3

Solid Cu wires cl. 1 acc. to DIN VDE 0295, IEC 60228

Applications:

For connection of electrical appliances and consumers with low and middle mechanical stress to Alternating Current (AC). It has wide use in household, office, for cable reels, for connecting of mobile consumers and etc.

Standarts:

DIN VDE 0295; IEC 60228- according to construction

DIN VDE 0293-308 and HD 186- according to colour coating

DIN VDE 0482-332-1-2; IEC60332-1- according to flame retardant

Construction:

SolidCCA-wires - 24 AWG; 0, 51 mm, acc. to IEC 60228Insulation: PE compoundCable bundle: 4 stranded pairsOuter sheath: PVC compound or LSOH compoundOuter sheath colour: for PVC-grey

Applications:Cable, stranded by pairs, used for transmission of digital signals with high speed of transmission, with spectrumof the frequency being used up to 100 MHz for cat. 5 and up to 125 MHz for cat. 5e. Suitable for setting computer systems for data transmission, measuring and control systems with proper resistance to electromagnetic influences

Standarts:

LAN cable acc. to ISO/IEC-11801/1995, IEC-1156/1995

ANSI/TIA/EIA - 568-A-5 SolidCCA-wires - 24 AWG; 0, 51 mm, acc. to IEC 60228

Technical characteristics:- Material: non-flammable plastic- Length of the cable trunking: 2 m

- Sizes of the cable trunkings:width: from 12mm to 100mmheight: from 10mm to 60mm

- Sizes of floor type cable trunkings:5012 / 7520 / 9020mm

- Sizes of step type cable trunkings:width: from 25mm to 100mmheight: from 25mm to 60mm

Technical data:

Material- shock resistant technopolymer on PVC baseSelf-extinguishing V0 degree to UL94Glow wire test: up to 960C

Standard- EN 61386-1; EN61386-21RAL- 7035

Length of the metal grate: 2, 5 m

Mounting:

- horizontally or vertically to a flat surface

- hanging installation

Technical characteristics:

- Console boxes: 65mm

- Junction boxes: SQUARE88 / 1010 mm

- Junction boxes: ROUND 65 / 70 / 80

Mounting:wall/plasterboard built-in mounting

Model:Round: 50 / 80 Square:width: from 85mm to 400mmheight: from 85mm to 350mmdepth: from 50mm to 120mm

Standard:- EN 60670-1

Technical Specifications:

- brass elements

- plastic insulation material

- color: grey/blue

- ambient temperature: -40C+85C

Technical Characteristics:

- electroplated brass alloy

- pre- cut slotted holes

- lenght: 1m

Technical Characteristics:

- electroplated brass alloy

- plastic insulation cover

Advantages:

- High temperature resistance- UV rays wear resistance- Easy to use- Reliable insulation- Protects conductors from moisture, water and corrosion

Applications:

- Insulation of cable connection- Industrial and home electronics- Equipment of electrical boards- Repairs of household appliances

Standard:

- European Union safety regulations and CE marking- Standard: EN 60684