Emirates Industrial Panel DUBAI

EIP HFW Hidden-Fix Wall (Architectural) The HFW is an architectural wall panel, with a hidden-fix joint system. This system conceals the fasteners used to install the panels, providing a smooth, aesthetic look to the building’s façade. It can be installed horizontally or vertically on any building with positive internal temperatures. The top choice of architects, HFW panels can easily be cut and modified to satisfy different needs without sacrificing the beauty of the façade. HFW panels minimum length is 2.00m and maximum length is 18.00m Care must be shown while selecting longer lengths for HFW panels. Mishandling during unloading and installation can cause damage. Consult EIP technical department for guidance.   Based on 0.50mm thick facers 2 Based on 0.70mm thick outer and 0.50mm thick inner facers 3 As per foam laboratory values * Consult factory for improved values with different foam systems   Insulation Core The core of EIP panels is an environmentally sustainable rigid PUR/PIR insulation foam. available in, FM Approved Fire-Resistant Polyisocyanurate (PIR) foam Flame retardant (PUR or PIR) B2 class Polyurethane (PUR) B3 class having properties as, Density : 40 ± 3 kg/m 3 Thermal Conductivity : λ PUR = 0.023 W/mK 1 & λ PIR =0.021 W/mK 1 > 90% Closed Cell content The blowing agent used in EIP panels is environmentally friendly pentane gas with Zero Ozone Depletion Potential (ODP) and Low Global Warming Potential (GWP). It does not contain CFC or HCFC. 1 As per foam supplier's laboratory values.

EIP CSP Cold Store Panels are composite prefabricated panels, consisting of two layers of metal facers and PUR/PIR insulation core between the facers. The CSP panel is a versatile product, allowing for use in : Walls Ceilings Partitions Heat Transmission Table The max heat gain by conduction in a cold store should be limited to 10 W/m 2 . This table shows the optimal insulation thickness to be selected for various temperature differentials(TD).   PRODUCT RANGE Panel thicknesses: 55, 80, 100, 120, 140, 150, 170 and 200mm System Width : 1110mm (effective coverage width) Panel lengths : 2000mm to 18000mm Thickness : 55mm to 200mm Joint System : Fire-Rated double tongue & groove slip joint Profile Options : Low Rib, Micro Lining, Micro Wave, Groove, Flat Suitable for wall, ceiling, partition and roof applications (with waterproofing)      

Different types of doors are offered by EIP to suite a wide variety of purposes demanded by cold store projects. EIP offers: Hinged doors Manual horizontal sliding doors Automatic horizontal sliding doors Automatic vertical sliding doors Rapid access doors for chiller & freezer applications Door are supplied in various thicknesses to suit the application and in off-white RAL9002 colour. Other colour options are available upon request. Doors incorporate internal safety release for added safety as well as door and floor heating for low temperature applications.

Different types of loading bay equipment are offered by EIP to suite a wide variety of purposes demanded by factories, warehouse and cold store projects. EIP offers: Manual sectional doors Automatic sectional doors Raised dock shelters Inflatable dock shelters Swing-Lip dock levellers Telescopic-Lip dock leveller Specialized sectional doors and dock leveller for negative temperature applications  

EIP Roof and Wall Panels are composite prefabricated panels, consisting of two layers of metal facers and PUR/PIR insulation core between the facers. EIP panels are versatile cladding products, allowing for use in: Roofs, External Walls and Partitions Panel thicknesses available range from 50 to 200mm, capable of meeting and exceeding local building regulation requirements.   Please contact EIP technical team for selecting the correct design for your slope 2 Based on 0.50mm thick facers 3 Based on 0.70mm thick outer and 0.50mm thick inner facers 4 As per foam laboratory values * Consult factory for improved values with different foam systems   Insulation Core The core of EIP panels is an environmentally sustainable rigid PUR/PIR insulation foam. available in, FM Approved Fire-Resistant Polyisocyanurate (PIR) foam Flame retardant (PUR or PIR) B2 class Polyurethane (PUR) B3 class having properties as, Density : 40 ± 3 kg/m 3 Thermal Conductivity : λ PUR = 0.023 W/mK 1 & λ PIR =0.021 W/mK 1 > 90% Closed Cell content The blowing agent used in EIP panels is environmentally friendly pentane gas with Zero Ozone Depletion Potential (ODP) and Low Global Warming Potential (GWP). It does not contain CFC or HCFC. 1 As per foam supplier's laboratory values.