Euroasian Ventures FZE

United Arab Emirates

Taint Tabor, Tense, Talon, Tann, Taldon, Taldork, Telic, Twitch and Shredded / Copper /  based extrusion scraps. Taint Tabor Clean Mixed Old Alloy Sheet Aluminum  Shall consist of clean old alloy aluminium sheet and sheet utensil scrap of two or more alloys free of 7000 alloy series, foil, Venetian blinds, castings, hair wire screen wire food or beverage containers, pie plates, hub caps, radiator shells, airplane sheet foil, oil cans, bottle caps, plastic dirt and other foreign substance. Oil grease not to total more than 1% upto 10% painted sheet, siding and awnings permitted. Talon New Pure Aluminium Wire and Cable Shall consist of new unalloyed aluminum wire or cable free from hair wire, wire screen , iron, insulation and any other foreign substance. Tann New Mixed Aluminium Wire and Cable Shall consist of new clean unalloyed aluminium wire or cable which may contain upto 10% 6000 series wire and cable free from hair wire, wire screen, iron, insulation and any other foreign substance. Taldon Baled Luminium Used Beverage Can Scarp Shall have a minimum density if 14 lbs per cubic foot and a maximum density of 17 lbs per cubic foot for unflattened UBC and 22 lbs. per cubic foot for flattened UBC. Size minimum 30 cubic feet with bale range dimensions of 24” to 40” by 30” to 52” by 40” to 84”. The only acceptable tieing method shall be as follows: four to six 5/8” X 0.20: steel bands or six to ten # 13 gauge steel wires (aluminium bands or wires are acceptable in equivalent strength and number). Use of skids and/or support sheets of any material are not acceptable. Must be magnetically separated material and free of steel, lead, bottle caps, plastic cans and other plastics, glass, wood, dirt, grease, trash and other foreign substances. Any free lead is basis for rejection. Any and all aluminum items, other than used beverage cans, are not acceptable. Items not covered in the specification are subject to special arrangement between buyer and seller. Taldrok Briquette Aluminum Used Beverage Can (UBC) Scrap Shall have a Briquette density of 50 pounds per cubic foot minimum. Nominal briquette size shall range from 12 to 24 inches X 12 to 24 inches in uniform profile with a variable length of 8 inches minimum and 48 inches maximum. Briquettes shall be bundles or stacked on skids and secured with a minimum of one girth band per horizontal layer. Briquettes not to overhang pallet. Total package height shall be 48 inches maximum. Banding shall be at least 5/8” wide by 0.020” thick steel strapping or equivalent strength. The weight of any bundle shall not exceed 4000 pounds. Material must be magnetically separated and free of steel, plastic, glass, dirt and all other foreign substances. And any all aluminium items other than UBC are unacceptable. Any free lead is a basis for rejection. Items not covered in the specification, including moisture and any variation in the specification are subject to special arrangement between buyer and seller.  Tense Mixed Aluminium Castings Shall consist of all clean aluminium castings which may contain auto and airplane castings but no ingot and to be free of iron, dirt, brass, Babbitt and any other foreign materials. Oil and grease not to total more than 2%.

Commodity Primary Aluminium Equivalent to Grade P1020 in the form of SOW's, weighting 500 kg (approx) each.   Quantity Purity  Al  99.70% min            Fe  0.20% min            Si  0.10% min

• MaterialCopper Wire
• Certificationiso certified
• ColorBrown, Red
• ConditionUsed
• ApplicationFoundry Industry, Melting
• TypeCopper Cable

Birch Cliff, Black Berry and Mill Berry   Copper Wire Birch Cliff 1 Copper Wire   Shall consist of miscellaneous, un alloyed copper wire having a nominal 96% copper content (minimum 94%) as determined by electrolytic assay. Should be free of the following. Excessively leaded, tinned, soldered copper wire, brass and bronze wire, excessive oil content iron and non metallic, copper wire from burning containing insulation hair wire burnt wire which is brittle and should be reasonably free of ash. Hydraulically briquetted copper subject to agreement. 2 Cliff Copper Shall consist of miscellaneous unalloyed copper scarp having a nominal 96% copper content (minimum 94%) as determined by electrolytic assay. Should be free of the following : Excessively leaded, tinned, soldered copper scarp, brasses and bronzes, excessive oil content, iron and non metallic copper tubing with other than copper connections or with sediment copper wire from burning containing insulation hair wire burnt wire which is brittle and should be reasonably free of ash. Hydraulically briquettes copper subject to agreement. Berry 1 Copper Wire   Shall consist of clean, untinned, uncocated, unalloyed aopper wire and cable not samller than No. 16 B & S wire gauge, free of burnt wire which is brittle. Hydraulically briquetted copper subject to agreement.

• PurityCopper (Cu) 99.974% - 99.987%
• Bismuth (Bi)01 ppm max.
• Argent (Ag)10 ppm max.
• Lead (Pb)25 ppm max.
• CommodityCopper Cathode - Iran
• Telerium02 ppm max.
• Nickel15 ppm max.
• OriginIran
• Selenium02 ppm max.
• Copper (Cu)99.974% - 99.987%
• Antimony (Sb)04 ppm max.
• Iron (Fe)15 ppm max.
• Tin (Sn)20 ppm max.
• Sulphur (S)70 ppm max.
• Arsenic (As)05 ppm max.
• Oxygen (O)150 ppm max.

HMSI, HMS 1 & 2, Re-Rollable Scraps, Cast Iron Scrap, 1&2 (80:20) as per ISRI 200-2006 200 - 202 HMS 1 (80%) 203 - 206 HMS 2 (20%)  ISRI Code No:   200 Item: No. 1 heavy melting steel. Wrought iron and/or steel scrap ¼ inch and over in thickness. Individual pieces not over 60 x 24 inches (charging box size) prepared in a manner to insure compact charging. ISRI Code No:   201 Item: No. 1 heavy melting steel 3 feet x 18 inches. Wrought iron and/or steel scrap ¼ inch and over in thickness. Individual pieces not over 36 inches 18 inches (charging box size) prepared in a manner to insure compact charging. ISRI Code No:   202 Item: No. 1 heavy melting steel 5 feet x 18 inches. Wrought iron and/or steel scrap ¼ inch and over in thickness. Individual pieces not over 60 inches 18 inches (charging box size) prepared in a manner to insure compact charging. ISRI Code No:   203 Item: No. 2 heavy melting steel. Wrought iron and/or steel scrap, black and galvanized ⅛ inch and over in thickness, charging box size to include material not suitable as No. 1 heavy melting steel. Prepared in a manner to insure compact charging. ISRI Code No:   204 Item: No. 2 heavy melting steel. Wrought iron and/or steel scrap, black and galvanized maximum size 36 x 18 inches. May include all automobile scrap properly prepared. ISRI Code No:   205 Item: No. 2 heavy melting steel 3 feet x 18 inches. Wrought iron and steel scrap, black and galvanized, maximum size 36 x 18 inches. May include automobile scrap properly prepared. However, to be free of sheet iron or thin gauged material. ISRI Code No:   206 Item: No. 2 heavy melting steel 5 feet x 18 inches. Wrought iron and steel scrap, black and galvanized, maximum size 60 x 18 inches. May include automobile scrap properly prepared, however, to be free of sheet iron or thin gauged material.

Honey Yellow  Brass Scrap  Shall consist of brass castings, rolled brass, rod brass, tubing and miscellaneous yellow brasses including plated brass. Must be free of manganese bronze aluminium brone, unsweated radiators or radiator parts, iron, excessively dirty and corroded materials. Ocean mixed unsweated Auto Radiators  Shall consist of mixed automobile radiators, to be free of aluminium radiators and iron finned radiators. All radiators to be subject to deduction of actual iron. The tonnage specification should cover the gross weight of the radiators unless otherwise specified.