Post Buy Requirement
EL
United Arab Emirates
Add Review

Other Products / Services

Drainage Accessories

Many standard, as well as custom, accessories are produced for sewerage and drainage systems to meet customer requirements.

some examples include:

Gully Pots
Sealing Plates
Ladders
Safety Cages & Handrails
View Complete Details

Rtrp Pipes

Extra Co produces GRP (GP or ISO resin), GRV (Vinyl Ester resin), and GRE (Epoxy resin) pipes based on the specifications required for their use.

The discontinuous FRPRTRP pipe manufacturing process (also known as dual-helical filament winding process) involves winding the resin soaked fiber onto a fixed position rotating mandrel of the required diameter (up to 4m). The pipe is then left to cure and harden before it is extracted from the mandrel. This manufacturing process limits the length of the pipe to the length of the mandrel (usually 9m or 6m), and is a slower process than the continuous manufacturing process. On the other hand, this manufacturing process allows for both radial as well as helical winding of the glass fibers onto the pipe which allows for achieving different tensile and compressive strength characteristics suitable for addressing different applications of varying pressure thresholds.
View Complete Details

Custom Steel Products

Miscellaneous steel products can be manufactured as per the design and requirement of the customer. If the design is complete and provided by the customer, Extra Co can manufacture and erect the products as per required specifications. If the design is not available, Extra Co can propose an economical design and implement it based on the customer's general requirements. Some examples of types of miscellaneous steel products that are manufactured include:

Crane Girders
Steel Mesh Fencing & Separators
Steel Tanks
Plain & Ornamental Handrails
Steel Posts, Poles, & Guardrails
Concrete Precast Steel Boxes (For Cable Trench Covers)
Boundary Wall Steel Spikes
View Complete Details

Steel Reinforcement Stirrups

Reinforcement stirrups processed at Extra Co vary from 8mm to 12mm in diameter. The manufacturing process is fully automated - the machine automatically pulls the required length of the stirrup from a steel coil, bends according to the pattern fed by the machine operator, and cuts once the bending is complete. The cycle continues until the steel coil is depleted - this process does not generate any steel waste.
View Complete Details

Steel Sheds

Steel sheds and warehouses can be manufactured as per the design of the customer (standard section designs are also available). If the design of the shedwarehouse is complete and provided by the customer, Extra Co can manufacture and erect the structure as per required specifications. If the design is not available, Extra Co can propose an economical design for the customer and implement it as per the general requirements. Extra Co Structural Steel Division can also handle the required civil works common to sheds and warehouses, such as column foundations, block walls, etc. Similarly with mechanical, electrical, and plumbing installations, such as piping and cabling, light fixtures, etc. If the works are minor, Extra Co is capable of handling them in-house, otherwise one of the group contracting companies will be employed to complete the civil & MEP works. In other words, Extra Co is perfectly equipped to take on only the steel works or turnkey projects including civil and MEP works.
View Complete Details

Scaffolding Systems

Scaffolding is mainly manufactured as per the standard cup-lock scaffolding system, but custom elements can be manufactured as per customer requirements. Extra Co manufactures all the elements of the cup-lock scaffolding system and other accessories and structural elements as well. Such elements include: Standards, Ledgers, & Props Decking & Infill Beams Base & Universal Jacks Drop-Heads & Base Sockets Intermediate Transoms & Intermediate Beam Brackets Horizontal & Cross Braces Tie Rods & Wing Nuts Vertical Frames, Cantilever Frames, & Hop-Up Brackets Scaffolding Accessories (Couplers, Connectors, Clamps, Pins, Etc.) Extra Co can also act as a one-stop shop for scaffolding and shuttering systems by also supplying the scaffold boards and plywood shutters if the customer requires.

View Complete Details

FRP Chambers

FRP Manholes liners can be produced in all shapes and sizes as well as any angle combinations of inlets and outlets for the manhole benching. Extra Co also produces both single-wall and double-wall manholes. The advantage of double-wall manholes is that they can be installed very quickly by just lowering the manhole into position and pouring concrete between the two walls to provide the counterweight for the water table uplift force (avoiding all the formwork otherwise required for the foundation of the manhole)

Similarly, Collection & Inspection Chambers are produced in all shapes (circular, square, rectangular) and sizes and as per the specifications and requirements of the customer. Liner shafts can also be produced separately if required by the customer.
View Complete Details

Steel Reinforcement Bars

Reinforcement bars processed at Extra Co vary from 8mm to 32mm in diameter with a maximum of 12m in length. The manufacturing process is CNC-controlled - 12m straight bars of the required diameter are fed into the machine while an operator indicates the length and bend pattern required; the machine then cuts and bends the bars accordingly.
View Complete Details

Aluminium Handrails

Extra Co specializes in the design, manufacture and installation of all forms of balustrades, handrails, privacy screens and pool fencing. Our extensive range of latest designs includes those utilizing Stainless Steel, Powder Coated Aluminum, Glass, Frameless Glass, Stainless Steel Wires and Architectural Fittings.

Extra Co can manufacturer and erect handrail, railings or balustrades built from aluminium, stainless steel or glass as per the required design and specifications. If the design is not available, Extra Co can propose an economical design for the client and implement it as per globallocal governing standards.
View Complete Details

FRP Ladders & Platforms

Ladders and platforms can be manufactured as per the design of the customer (standard designs are also available). The hand-lay-up as well as the pultrusion manufacturing process are used for the production of these items.

Some examples of such products include:

Ladders, Safety Cages, & Handrails
Gratings (Moulded & Pultruded)
Platforms
View Complete Details

FRP Domes

Domes and sheds can be manufactured as per the design of the customer (standard designs are also available). The hand-lay-up manufacturing process is used for the production of these items. Additionally, decorative FRP panels can be manufactured for facade cladding.

Some examples of such products include:

Domes & Minarets
Car Sheds & Roof Shades
Facade Cladding
Other Special CoverCladdin
View Complete Details

FRP Spools

Spools and Fittings are produced from either discontinuously wound pipes or continuously wound pipes, depending on the application and specifications required. The process is a manual one and requires cutting pipe segments to the required angles and then joined to form the fitting. Some fittings (particularly bendselbows) are produced by moulding using the filament winding process.The spools and fittings can be produced in GRP (GP or ISO resin), GRV (Vinyl Ester resin), or GRE (Epoxy resin), and can be in RTRP specifications. Extra Co also performs stress, Flexibility, and surge analyses (when required) for the appropiate design speicifications.

Some examples of spools and fittings include:

Bends (of Varying Degrees)
T-Connections & Y-Connections
Flanges
Factory AssembledPre-Fabricated Spools
View Complete Details

FRP Kiosks & Enclosures

Kiosks and enclosures can be manufactured as per the design of the customer (standard designs are also available). The hand-lay-up manufacturing process is used for the production of these items.

Some examples of such products include:

Kiosks & Enclosures ( Single & Double skins)
Guard Houses & Cabins
Meter Boxes
Other Special Enclosures
View Complete Details

Aluminium Canopies

Aluminium canopies and skylights can be manufactured as per the design of the customer (standard section designs are also available). If the design of the canopyskylight is complete and provided by the customer, Extra Co can manufacture and erect the structure as per required specifications. If the design is not available, Extra Co can propose an economical design for the customer and implement it as per the general requirements. Extra Co Aluminium & Cladding Division can also handle the required civil works common to canopies or skylights, such as column foundations, block walls, etc. Similarly with mechanical, electrical, and plumbing installations, such as piping and cabling, light fixtures, etc.
View Complete Details

Aluminium Doors & Windows

Aluminium doors and windows can be manufactured as per the design of the customer (standard section designs are also available). If the design is not available, Extra Co can propose an economical design for the customer and implement it as per globallocal governing standards. Some examples of types of aluminium doors and windows that are manufactured include:
Hinged Windows & Doors
Thermal Break Hinged Windows & Doors
Aluminium Tilt & Turn Windows & Doors
Sliding Windows & Doors
Thermal Break Sliding Windows & Doors
View Complete Details

Stainless Steel Pipes

Steel pipes are manufactured in different diameters (0.5" to 4.0"), thicknesses (1.5mm to 5.0mm), and lengths as per the industry standards. The uses for steel pipes vary from structural steel elements, utilities piping, scaffolding manufacturing, and others. Pipes can be ordered in different finishes: normal, black, galvanized, powder-coated, etc. and can be manufactured to any international standard required (BS, ASTM, DIN, etc.).

Steel tubes are manufactured in different shapes (sqaure or rectangular), cross sections (0.5" to 4.0"), thicknesses (1.5mm to 5.0mm), and lengths as per the industry standards. The uses for steel tubes are mainly for structural steel elements. Tubes can be ordered in different finishes: normal, black, galvanized, powder-coated, etc. and can be manufactured to any international standard requires (BS, ASTM, DIN, etc.).
View Complete Details

Steel Supports

Steel supports and platforms are manufactured as per the design of the customer. If the design of the steel supports is complete and provided by the customer, Extra Co can manufacture and erect the supports and platforms as per required specifications. If the design is not available, Extra Co can propose an economical design for the customer and implement it as per the general requirements.

The steel supports can be manufactured using all types of sections, including but not limited to universal columnbeam sections, angles, channels, pipes, tubes, etc. Platforms can also be manufactured in any surface finish, including but not limited to smooth plates, checkered plates, grating, etc. Some examples of types of supports and platforms that are manufactured include:

Pipes & Ducts Steel Supports
Steel Trusses (For Beam Strengthening or Roofing Support)
Power Transmission Tower Supports
Rigs & Machines Steel Supports & AccessControl Platforms
Industrial Steel Catwalks & Cross Bridges
View Complete Details

Steel Ladders

Steel ladders, staircases, and doors are manufactured as per the design of the customer within the applicable (globallocal) standards. If the design is complete and provided by the customer, Extra Co can manufacture and erect the products as per required specifications.

If the design is not available, Extra Co can propose an economical design for the customer and implement it as per globallocal governing standards. Some examples of types of steel ladders, staircases, and doors that are manufactured include:

Steel Ladders & Safety Cages
Fire Escape Steel Staircases (Traditional-Shape & Spiral-Shape)
Pedestrian & Vehicle Steel Gates
Ornamental Steel Gates & Doors
Fire-Rate Steel Doors & Hatches
View Complete Details

Aluminium Composite Panels

Aluminium composite panels (ACP) are manufactured by bonding top and bottom layers of aluminum sheet with an anti-toxic polyethylene core material. Both surfaces are rolled and coated with special baking varnish. Applications of ACP include: building exteriors curtain walls, decoration or reformation, storey-addition for old buildings, decoration of interiors walls, ceilings, bathrooms, kitchens and balconies, advertisement boards, display platforms & signboards, etc Extra Co fabricates panels as per the clients desired color & thickness according to GBT 17748-1999 standard.
View Complete Details

RTRP Fittings

Spools and Fittings are produced from either discontinuously wound pipes or continuously wound pipes, depending on the application and specifications required. The process is a manual one and requires cutting pipe segments to the required angles and then joined to form the fitting. Some fittings (particularly bendselbows) are produced by moulding using the filament winding process.The spools and fittings can be produced in GRP (GP or ISO resin), GRV (Vinyl Ester resin), or GRE (Epoxy resin), and can be in RTRP specifications. Extra Co also performs stress, Flexibility, and surge analyses (when required) for the appropiate design speicifications.

Some examples of spools and fittings include:

Bends (of Varying Degrees)
T-Connections & Y-Connections
Flanges
Factory AssembledPre-Fabricated Spools
View Complete Details

Frp Fittings

Spools and Fittings are produced from either discontinuously wound pipes or continuously wound pipes, depending on the application and specifications required. The process is a manual one and requires cutting pipe segments to the required angles and then joined to form the fitting. Some fittings (particularly bendselbows) are produced by moulding using the filament winding process.The spools and fittings can be produced in GRP (GP or ISO resin), GRV (Vinyl Ester resin), or GRE (Epoxy resin), and can be in RTRP specifications. Extra Co also performs stress, Flexibility, and surge analyses (when required) for the appropiate design speicifications.

Some examples of spools and fittings include:

Bends (of Varying Degrees)
T-Connections & Y-Connections
Flanges
Factory AssembledPre-Fabricated Spools
View Complete Details

RTRP Spools

Spools and Fittings are produced from either discontinuously wound pipes or continuously wound pipes, depending on the application and specifications required. The process is a manual one and requires cutting pipe segments to the required angles and then joined to form the fitting. Some fittings (particularly bendselbows) are produced by moulding using the filament winding process.The spools and fittings can be produced in GRP (GP or ISO resin), GRV (Vinyl Ester resin), or GRE (Epoxy resin), and can be in RTRP specifications. Extra Co also performs stress, Flexibility, and surge analyses (when required) for the appropiate design speicifications.

Some examples of spools and fittings include:

Bends (of Varying Degrees)
T-Connections & Y-Connections
Flanges
Factory AssembledPre-Fabricated Spools
View Complete Details

Frp Manholes

FRP Manholes liners can be produced in all shapes and sizes as well as any angle combinations of inlets and outlets for the manhole benching. Extra Co also produces both single-wall and double-wall manholes. The advantage of double-wall manholes is that they can be installed very quickly by just lowering the manhole into position and pouring concrete between the two walls to provide the counterweight for the water table uplift force (avoiding all the formwork otherwise required for the foundation of the manhole)

Similarly, Collection & Inspection Chambers are produced in all shapes (circular, square, rectangular) and sizes and as per the specifications and requirements of the customer. Liner shafts can also be produced separately if required by the customer.
View Complete Details

FRP Sheds

Domes and sheds can be manufactured as per the design of the customer (standard designs are also available). The hand-lay-up manufacturing process is used for the production of these items. Additionally, decorative FRP panels can be manufactured for facade cladding.

Some examples of such products include:

Domes & Minarets
Car Sheds & Roof Shades
Facade Cladding
Other Special CoverCladdin
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Rajendra Saple (Extraco LLC)
  • Industrial Area No 2 P.O.Box 6174 Sharjah UAE
  • Share us via