Post Buy Requirement
FT
United Arab Emirates
Add Review

Other Products / Services

Powerful Motor

  • Power Input 1500W
  • Voltage 110-120V~ 50-60Hz, 220-240V~ 50-60Hz
  • Surface Speed 15 - 28 m/sec
The powerful motor is equipped with feedback electronic speed stabilization for a smooth even finish.
No matter the load, the motor keeps the same even speed.
High stability belt tracking. All pulleys are flanged so the belts stay on under all conditions.
Quick, tool free belt changes .
Perfect for grinding down weld seams.
Follows the curved contours of pipes and other convex work surfaces.
View Complete Details

Short Hood

Short Hood

A short protective hood which provides protection of the face and breathing paths.

Areas of Application

Dusty environments without the necessity to protect neck and shoulders
Environments with low chemical resistance requirements
View Complete Details

Bucket Mixers

  • Power Input 1000W
  • Power Output 560W
  • Voltage 110-120V~ 50-60Hz, 220-240V~ 50-60Hz
A powerful and reliable mixing solution for a wide variety of media, the AM5000 is the most labor saving mixer available. It is much safer than a hand-held mixer. Simply load it, then let the machine do the work! Even the most viscous materials get mixed thoroughly and fast by the high torque motor. When done, just swing the motor head out of the way and lift away the bucket. The AM5000 is easily portable with its built-in folding T-handle and wheels.Just wheel it around the jobsite like wheeled luggage.
View Complete Details

PosiTector

  • Models 4
PosiTector UTG

The PosiTector UTG is ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side.

4 Models: Gage body - Standard or Advanced; Probe - UTG C or UTG M.

All Gages Feature :

Simple: Pre-programmed velocities - simply select from a list of common materials or enter your own with ease;
Durable: Weatherproof: Solvent, acid, oil, water and dust resistant; Wear-resistant probe tip; Shock-absorbing, protective rubber holster with belt clip
Accurate: Conforms to national and international standards including ASTM E797
Versatile: PosiTector body accepts all PosiTector 6000, 200, DPM, UTG, RTR and SPG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage or wall thickness gage; Selectable display languages
View Complete Details

Elcometer UTG

  • Thickness 0.63mm to 500mm (0.025 to 20").
Elcometer UTG

From a steel thickness gauge to a gauge which ignores the thickness of the coating, Elcometer has a range of ultrasonic material thickness gauges to meet specific requirements.

Series:

Elcometer 204 (Steel TG) - Low Cost Entry Level

Elcometer 205, 206 & 206DL UTG - User Selectable Transducers

Elcometer 207 Precision UTG

Elcometer 208 & 208DL ThruPaint UTG - Ignores Coatings Layer
View Complete Details

SURFACE CONDITION Elcometer

SURFACE CONDITION

Elcometer 128 Pictorial Surface Standards
Pictorial Surface Standards are high quality photographs which are used for comparison purposes to assess the visual appearance of a steel surface. Elcometer's range of Surface Standards covers most of those required for surface cleanliness.

Surface Standards include:

BS EN ISO 8501-1:2007SIS 055900
BS EN ISO 8501-4:2006
The SSPC Standard - VIS 1
The SSPC Standard - VIS 2
The SSPC Standard - VIS 3
The SSPC Standard - VIS 4
The SSPC Standard - VIS 5
View Complete Details

Surface Comparator

Elcometer 127 Keane-Tator Surface Comparator & Magnifier:

are available in sand, shot or grit surface profiles and is measured in mils. Each comparator is supplied with 5 profile grades ranging from 0.5 - 5.5 mils and is designed for use with the illuminated magnifier to assist with the visual comparison.
View Complete Details

Surface Comparator

  • Series 129
Elcometer 129 Rubert & Rugotest Surface Comparator

Available in two models - The Elcometer 129 Rubert is available in grit and shot versions and the Elcometer 129 Rugotest is available with the shot and grit profiles in the same block.

Other Specialist Surface Comparators

Elcometer 133: for assessing the surface condition of ship's propeller(s) - either during dry dock or underwater. These measure the Roughness Average (Ra) and Peak-to-Valley Mean Height (Rz).
Elcometer Surface Weld Comparator: to measure the quality of weld beads.
Whilst surface comparators provide a useful indication of surface profile the interpretation of the profile is dependent on the user and thus the use of surface comparators to determine surface profile is a subjective test.
View Complete Details

TQC DewCheck

  • Series DC7000
TQC DC7000 DewCheck

The world's first dewmeter dedicated to protective coatings work. Dewcheck incorporates all the features required for climate condition monitoring in a single gauge including relative humidity, air temperature, dew point, surface temperature and delta T, complete with memory.

Incorrect climate parameter may lead to condensation on the surface resulting in undercoat corrosion and poor adhesion. High or low temperature andor humidity will affect the curing process and inter-coat adhesion and performance of the coating system.
View Complete Details

PIPELINE COILS

  • Size 50mm
PIPELINE COILS

Suitable for all High Voltage Porosity detectors, holiday detectors, spark testers and jeepers, Special Square section no sag design. Sizes from 50mm. Coil joiners and handle extension pieces available.
View Complete Details

TRADE ARC TRANSFORMER WELDERS

  • Supply V (amp) 230v (16amp)
TRADE ARC TRANSFORMER WELDERS
TRADE ARC TRANSFORMER WELDERS

The Weldmate trade (portable) range is mainly for the serious DIY trade welder and offers portability, ease-of use and convenience at value-for-money prices. The welders are all turbo fan cooled for extended performance. Heavy duty casing for added durability. 'Electrode to Power' gauge to indicate the correct electrode size for the job in hand. Turbo fan cooled.
View Complete Details

PROFESSIONAL ARC INVERTER WELDERS

  • Electrode Size / Rod diameter mm 1.6 - 3.2 1.6 - 4 1.6 – 2.5 1.6 - 4 1.6 - 5 1.6 - 6 1.6 - 6
PROFESSIONAL ARC INVERTER WELDERS

SIPs unique and patented Weldmate Inverter range provides incredible power and high quality results from remarkably lightweight, but reliable DC power sources. Cutting edge technology (including anti-stick circuitry) ensures these units give a stable arc whilst maintaining optimised welding parameters. Ideal for a wide range of applications; including fabrication, general and auto repairs, agricultural repairs and on-site welding. Superb build quality and extremely easy to use, but with exceptionally high duty cycle. Supplied complete with leads and arc accessories and covered by a 2 year warranty.
View Complete Details

IRON POWDER TYPE ELECTRODE

  • Dia (mm) 2.5 3.15 4.0 5.0
Applications: B & H-7018 is suitable for welding of Carbon steels in fabrication of machinery & equipment of wide range, especially for structures which are designed for severe service conditions involving heavy stresses and dynamic loads. Typical application include penstocks, boilers, pressure vessels, wagons, rotary kiln shells, heavy earth moving machinery etc.
View Complete Details

Copper Coated Steel Wire

  • Diameters 0.8 mm, 1.2 mm and 1.6 mm
Copper Coated Steel Wire for MIG MAG CO2 Arc Welding

Characteristics :

Stable arc and smooth flow in all range of currents.

All position welding.

Minimum spatter under optimum welding conditions.

Wire is available in diameters 0.8 mm, 1.2 mm and 1.6 mm. It is wound on standard spools of outer dia 300 mm and width 100 mm. Each spool is vacuum packed in polythene bag cling film and then packed in a corrugated box. The corrugated box is then again shrink wrapped in a polythene to give maximum protection from moisture. Note: Wire can be made in any other dia like 1.0 mm as per the requirement of the customer.

Applications: Generally used for low carbon steel. mild steel and carbon steel of strengths upto 55kgfmm2.
View Complete Details

Light Versatile Grinder

  • Power Input 1200W
  • Voltage 110-120V~ 50-60Hz, 220-240V~ 50-60Hz
  • Collet 6mm *
Light and versatile grinder. Ideal tool for intricate grinding and polishing.

The long reach spindle allows working in hard-to-reach places
The 1200W models are equipped with feedback electronic speed stabilization for a smooth even finish.
The 700W "N" models have electronic speed stabilization but without tachogenerator feedback for more operator feel.
No matter the load, the motor keep the same even speed.
Handy & compact: Excellent weight balance and superb ergonomics makes this tool easy to use.
View Complete Details

Concrete Vibrators

  • Voltage 110-120V~ 50-60Hz, 220-240V~ 50-60Hz
  • Power Input 1400W
This light and dependable vibrator is set up to consolidate poured concrete. Comfortable for the operator with the support strap, it's easy to use quickly under all conditions.

The durable, cable-driven vibrator heads and kink resistant shafts are designed to stand up to the rigors of long duty and tough jobsite use.

Various shaft lengths and head diameters are available to suit specific needs.

Convenient and self-contained, these are the best choice for consolidation jobs where easy mobility is needed.
View Complete Details

SURFACE CLEANLINESS Soluble Salt

SURFACE CLEANLINESS

Surface Cleanliness Soluble salt & ion specific contamination (sulphate, chlorides, nitrates etc.) which are often invisible to the eye, together with amine blush (for amine cured epoxy coating) can result in premature coating fuilure resultiing in high re-coating and maintance costs. Here's a range of test equipment for assesing surface cleaniless prior to applying a coating.

The Elcometer 130 quickly and accurately measures the level of soluble saltes on surfaces nearly 5 times faster than Bresle equivalent test methods

Automatic temperature compensation ensures accurate results

Fully portable hand-held, ergonomic design ideal for use in the field

Fast reading rate allows multiple test to be completed efficiently

Pressure plate ensure a constant and uniform pressure to paper

Automatic detection of paper size and automatic adjustment of reading value

Dust and water resitant rugged design equivalant to IP64

USB and Bluetooth data output to ElcoMaster Software

Store upto 150, 000 readings in 2500 alpha numaric batches

Non -oxidising gold plated contracts ensures lifetime accuracy
View Complete Details

Elcometer 134S Chloride Ion Test Kit

  • Series 134S
Elcometer 134S Chloride Ion Test Kit for Surfaces

The Elcometer 134S Chloride Ion Test Kit for Surfaces allows the surface to be tested for chloride salts prior to application of a coating.

Chloride salts left on the surface before the first coat is applied can result in the coating system being forced off the surface by corrosion or blistering before the full life of the coating has been reached. To ensure that the chloride has been removed it is essential that the surface is tested before the coating is applied.

Elcometer 134S test method: a latex sleeve is filled with a Chlor*Rid extract solution and stuck to the test surface where the solution is worked against the surface to extract the salts. The titration tube is inserted and the results can be recorded.
View Complete Details

Chloride Test Kit

  • pieces 25 pieces
TQC Bresle (Chloride Test) Kit & Patches

The TQC Bresle Kit - Chloride Test Kit includes all the necessary equipment for assessing the level of soluble salts on blast-cleaned surfaces prior to coating. Inside the kit, is a conductivity gauge used for the assessment of soluble salt ions as chlorides, sulphates and nitrates.

Contamination of blast-media

The TQC Bresle Kit - Chloride Test Kit is also suitable to determine the contamination of blast-media in use. This test helps to prevent the state - that the dissolved salts in the recycled abrasive media or water will not re-contaminate the surface being cleaned.

Unique Feature

Unique Direct Sampling Procedure (DSP) to ensure high speed and accuracy. Up to 60 times more accurate than other test kits available.
View Complete Details

Calibration Foils

  • Thickness 12.5μm to 20mm
Calibration Foils

The Elcometer 990 coating thickness gauge calibration foils are ideal for use in the laboratory, on the production line or on site.

Calibration foils or shims are the most convenient way of creating a coating thickness standard on the substrate material, surface finish or form. Shims provide the ideal method for adjusting the calibration of the coating thickness gauge to ensure the greatest possible accuracy.

Metric and Imperial values displayed on each calibration foil
Available individually or in shim sets - with or without Zero Plate
Precision foils with 1% accuracy
Each shim has a unique serial number for traceability
Shims are available in thicknesses from 12.5m to 20mm (0.5 to 790mils)
View Complete Details

DC Holiday Detector

  • Size 4m (13')
  • output voltage 0.5 - 15kV and 0.5 - 30kV
  • Series 236
Elcometer 236 DC Holiday Detector

The Elcometer 236 Holiday Detector provides high voltage porosity testing to detect pits, flaws, holes, etc. in a wide variety of non-metallic coatings. Each unit is supplied in a convenient carry case which also holds the probe handle and an additional (optional) external re-chargeable battery pack which doubles the testing time available

Robust and fully portable
Digital display of output voltage or current
Supplied with a band brush probe. A wide range of probe brushes and springs available
Audio and visual alarms for noisy environments. Integrated neon bulb in the handle, together with buzzer indicate when a holiday has been located
Adjustable sensitivity allows use on partially conductive surfaces
Available in two versions: 0.5 - 15kV and 0.5 - 30kV; with fully adjustable output voltage in 100 V steps
The std probe handle can be replaced with a telescopic handle - extending the measurement reach up to almost 4m (13'), ideal for testing on largehigh structures
View Complete Details

Porosity Detectors

  • Series DC15
PCWI Compact DC15 Porosity Detectors

A High Voltage DC Porosity detector also known as holiday detectors, spark testers, porosimeters and jeepers. These are used to ensure the longevity of coating systems by locating pin holes or holidays, air bubbles, and porosity in non-conductive (dielectric insulation type) coatings on conductive substrates, including concrete.

Applications

Suitable for Production Pipeline coating operations, Tank-work and Structures. Ideal for use on storage tanks, valves and pipelines
Housed in a fully portable ABS case, the Detectors deliver stabilised DC output of up to 30kV. Constant current source maintains applied test voltage. Full test current at low voltages (where it is needed most) when testing at low film builds (eg 150m, as per AS3894.1-2002)
Incorporating momentary-on and continuous-on switches (mounted on the front panel), allowing the units to be switched on momentarily for safety, or to run continuously
No need to swap power supplies or change probes to change voltage - the detectors have clip-on battery packs which can be separately charged. Can operate off mains power (via the charger) during recharging. Fully recharged in 10 hours. Regulated DC output fully adjustable. Applied voltage and battery condition are continuously shown on the Liquid Crystal Display.
View Complete Details

DC CREST METER

  • DIMENSIONS (36 x 29 x 18cm)
DC CREST METER

For verifying output voltage and the calibration of High Voltage DC Porosity Detectors and Holiday Detectors.

Applications

Verification of output voltage and set voltage of detectors when a load is applied to the probe
To ensure accuracy, and to enable voltage adjustment (if necessary)
Features

0 to 30kV (auto ranging)
Used for checking & calibrating Porosity Detector output voltage
Compact, lightweight hand-held unit
Integral probe
Conformance Certificate
Carry Case (36 x 29 x 18cm)
View Complete Details

Head Band Earmuffs

  • Series EM 2262
Phantom EM 2262

All-round earmuff. Offering generous interior space maximum comfort during long shifts. Suitable for workshops, panel beating shops, machine shops, printers, textile plants, lawnmowers etc.

Perfect height adjustment of the shells with reduced transference of body noise vibrations guarantees best fitting to the head.
Moderate clamping force offers maximum of wearing comfort.
Easy interchangeable cushions.
Technical innovation and maximized wearing comfort.
SNR 28 dB
View Complete Details

Earplugs

  • METERIAL Polyurethane
  • Series 3M
3M EARPLUGS

3M 1100 uncorded 1110 corded foam earplugsfeature soft, hypoallergenic foam and a tapered design to fit comfortably in the ear-canal. Smooth, dirtresistant surface provides better hygiene. The earplugs are easy toroll down for quick and easy fitting. The 3M 1110 is equipped with a comfortable, cloth cord to help prevent earplug loss.
View Complete Details

Garnet

  • SIZE in mm 1.710-1.400
Garnet has many applications and is mainly used as an abrasive in abrasive blasting & water jet cutting and as a adsorbent in water filtration. Almandite is the best abrasive Garnet with the composition of 3FeO, AI203, 3SI02 of all the 6 major varieties of Garnet.

Applications: Fine grained Garnet - powders for polishing Glasses TV-Tubes, Metal Decorative stones, Plastics, Tiles, etc. Abrasive, Water jet cutting system. Sand blast cleaning for offshore rigs, general marine, structural steel, oil storage vessels, rail cars containers, high chrome-nickel specification, and pipes etc. Water filtration, water softening particularly for drinking water supply. Grinding wheels. Coated abrasive fields. Ceramics and Glass. Wood furniture. Preparation of non-skid tracks, steps, sports ground surfaces, etc
View Complete Details

Aluminum Oxide

  • MICRON 45 - 75
Aluminum oxide is the second-hardest mineral after diamond . It is also referred to as Brown Bauxite, Brown Fused Alumina and Brown Corundum.

Blastline stocks brown aluminum oxide produced by fusing bauxite and anthracite in an electric arc furnace at high temperature. The resulting oxide is over 95% Al203. Its high density and angular sharpness make it one of the fastest, most versatile and economical cutting abrasives available

Applications: Usable in both dry and wet blasting applications from cleaning and deburring to etching and finishing Used where a fast cutting action is required, also for compatibility with the substrate to be cleaned should grit entrapment occur Used in hand blast cabinets and specialized wet blasting applications.
View Complete Details

Glass Beads

  • Hardness approx. 2, 45 kg/l
  • Grain Classes 420 - 840 µm
A versatile media, made from soda lime and of a spherical shape. Tough enough to handle aggressive cleaning, yet gentle enough to apply finishing to even delicate parts. Special Feature: Careful cleaning of sensitive surfaces (moulds, tools, motor parts, turbine vanes), shot peening of non-ferrous metal surfaces, surface finishing of metal and glass work pieces, wet blasting.

Applications:

Finishing: Glass Bead blasting can be used on a wide range of materials including metal, glass, plastic and rubber. The smaller the glass spheres, the smoother the surface; larger spheres produce a more textured finish.
Cleaning: Glass Bead blasting removescleans foreign substances from the surface without a dimensional change to the surface. A wide range of bead sizes is available.
Deburring: Glass Bead blasting removes burrs, feathered edges, from parts in a precision operation. Corners and edges must be deburred with precision to assemble and operate properly. Glass Bead blasting guarantees that no base metal from the surface is removed.
Peening: Peening with Glass Bead is a low-cost form of creating a uniform surface layer of compressed stress in alloy substances. Peening acts to combat stress cracks and corrosion, resulting in increasing the life of metal parts. The high degree of roundness of our Glass Bead media enhances the performance of stress resistance processes.
View Complete Details

Potassium Sulphate

  • Specific Gravity 2.66
Specially produced and sized potassium sulphate crystal. K2-Strip is an odourless, non-volatile, non-flammable and non-controlled substance used in both parts cleaning and paint removal. K2-Strip is an odourless, non-volatile, non-flammable and non-controlled substance. No special disposal considerations are required.

Applications

Paint Removal : Removes paint and other coatings from aluminum, stainless steel, glass and chrome.
Clean Parts : Will not damage threads, cast aluminum bearings and seals.
Use in Hazardous Areas : Will not cause thermal sparks.
Inspect Weld Seams : K-2 will not cause crack closure.
Remove Dirt, Residue or Paint from Tank Interiors : K-2 is non-hazardous to workers, even in confined areas. Solubility of media allows for easy cleanup.
Speed Up Turnarounds and Avoid Shutdowns : Other work may continue while K-2 is used.
Replace Hand Cleaning : K-2 is faster, reduces manual labour.
Remove Tar Buildup On Asphalt Shingle Equip. : Will not damage bearings or rollers.
Remove Dirt, Barnacles & Paint From Steel Vessels : K-2 will not damage substrate and helps meet containment requirements.
View Complete Details

Sodium Bicarbonate

Soda is a crystalline structured abrasive, white in colour but often appears as a fine powder. It is a non-toxic, non-hazardous, non-flammable(non-sparking), water soluble media. This inorganic compound is high in purity allowing it to have an angular particle shape. The abrasive is extremely soft, with a Mohs hardness of 2.5. This abrasive removes coatings without causing heat buildup, sparks or abrasion to the surface being blasted.

This soft abrasive may be used on wood, brick, marble and other surfaces. Ideal for a variety of applications from heavy duty components to delicate, thin-gauged materials such as aluminium, copper, etc. Suitable for open blasting applications where reduced dust levels and ease of waste disposal are essential. Used in both industrial and commercial cleaning and coating removal applications and in drywet blast applications where a gentle-blasting action is required.

Applications

Cleaning (stains, oil and grease); Degreasing
Fire restoration work (smoke and soot - damage cleanup)
Graffiti and Coating removal (paint)
Remanufacturing applications
Turbo and small parts
View Complete Details

Elcometer Surface Comparator

  • Series 125
Surface Profile Comparators

Elcometer 125 Surface Comparator

Has four reference profile grades to measure the profile of either grit or shot and is measured in microns.
View Complete Details

Insulated Flexible Duct

  • Diameters 4”to 14”
INSULATED FLEXIBLE DUCT

Fab-Flex Flexible Insulated Duct is made of triple lamination of aluminum foil, polyester and metalized polyester film permanently bonded to a coated spring steel wire helix. Thermal efficiency is provided by wrapping the exterior with a blanket of fiberglass insulation. The strong outer insulation jacketvapor barrier is made of fiberglass reinforced metalized polyester film laminate.
View Complete Details

UNINSULATED FLEXIBLE DUCT

  • Diameters 4”to 14”
UNINSULATED FLEXIBLE DUCT

Fab-Flex Uninsulated Duct is made of triple lamination of aluminum foil, polyester and metalized polyester film permanently bonded to a coated spring steel wire helix.
View Complete Details

ALUMINIUM RIGID DUCT

  • Diameters 4”to 14”
ALUMINIUM RIGID DUCT

This lightweight malleable and corrosion resistant metal in 'Stucco Embossed' type is used as cladding on exposed Rectangular or Spiral duct. Apart from this, Plain type (Reflector Matt finish) is also widely used as air ducts in areas such as swimming pool, clean rooms of sensitiveindustrial films etc.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Antony Cleetus (Fabeis Trading LLC)
  • Al Quoz Dubai, United Arab Emirates
  • Share us via