Our Products #1516757

Laser distance sensors with a variety of measurement ranges
Shape and colour of the target object is largely irrelevant
High accuracy and resolutions up to 7 m
Rapid response time up to 1 kHz
Intelligent teach-in user concept
2 switching outputs
Analogue output: 4 . 20 mA / 0 . 10 V
4 20 mA / 0 10V
Variants with serial interface for measuring differences and thicknesses in master/slave mode
ABS housing with rotatable plug

Description:

Special features for Hogller Pressure Transmitters

Origin: Germany

The HOF range of pressure sensors guarantee a wide application field in a high accuracy, rugged and compact design.

The stainless steel membrane is completely vacuum-sealed, extremely burst resistant and applicable for all standard media across hydraulics, pneumatics, environmental engineering, process technology, semiconductor technology and automotive engineering.

As part of the stringent manufacturing process, all HOF pressure transducers are individually pressure and temperature tested to conform to DIN EN ISO 9001:2008.

With compensation and adjustment performed electronically, these pressure transmitters are characterized by a very low total error and excellent long-term stability.

Description:

Features
* 12-24VDC power supply of line driver output(line-up)
* Suitable for measuring angle, position, revolution, speed, acceleration and distance
* Power supply : 5VDC, 12-24VDC 5%

Applications
* Automatic position control of conveying machine

Description:

Features
* Various input/output (default: indicator)
- Input: DC voltage, DC current, AC voltage, AC current
- Output: RS485 communication output, Low speed serial output, transmission (DC4-20mA) output, BCD dynamic output, NPN/PNP open collector output, relay output
* Maximum allowed input : 500VDC, 500VAC, DC5A, AC5A
* Display range: -1999 to 9999
* High/low-limit display scale function
* AC frequency measurement (range: 0.1 to 9999Hz)
* Various functions: Monitoring peak display value function, display cycle delay function, zero adjustment function, high display correction function, transmission (DC4-20mA) output scale function etc.
* Power supply: 12-24VDC, 100-240VAC 50/60Hz

1. Limit switch becomes to make the aluminum die-casting in the case which is strong it maintains a long life in shick outside.


2. Inner switch is composed of 2 stage, it makes with strong quality of material.


3. Heat-proof, oil-proof, dust-proof structure.


4. Protected structure : IP 67

Use

1. Location decision of various machine.


2. Passage confirmation and directional control of cargo work transportation machine.


3. The other general industial machine.

Description:

The DAT1010-OEM is an OEM Temperature Transmitter PCB Board Temperature transmitter designed to fit in any small enclosure. The DAT1010-OEM can be pre-programmed to a customers setting or a connector can be supplied so the customer can configure with the Prodat programmer and Prosoft software, available from Datexel. The DAT1010-OEM can accept signals from RTD's. mV, Resistance and Potentiometer then convert this signal into a 4-20mA signal. The sensor type, range, zero and linearization, is programmable with the Prodat software.

The input is measured, linearized and converted and then scaled to the industrial standard of 4-20mA signal (2 wire device).

The RTD sensor is selectable for Pt100, Pt1000, Ni100 or Ni1000.

The resistance input is selectable from 0-200, 0-500, 0-2000 Ohms.

The mV input is selectable from -100mV to 700mV with a minimum span of 2 mV.

The Potentiometer can accept resistance in the range of 0-200 Ohms, 200-500 Ohms and 0.5 to 2 k ohms.

The RTD and resistance can be 2 wire or use compensation wire to improve accuracy i.e. 3 or 4 wire. There is an option to program the burn out failure alarm on the 4-20mA signal to High (20mA) or Low (4mA). The power supply to the Temperature Transmitter has a high range of tolerance and can accept voltage between 10 and 32 Volt. The DAT1010 Temperature-Transmitter is Loop Powered (2 Wire).

description:

output type cnt-400
with contacts : 2 kinds of relay outputs(spst(1a))
without contact : 2 points of npn open collector(v)

output typecnt-700
with contacts : 2 kinds of relay outputs(spst(1a)) , spdt(1c)
without contact : 3 points of npn open collector(v)

output mode couter
11 kind function(fncrkpqastd) setting

output mode timer
9 kind function(ondond.1ond.2flkflk.1flk.2intint.1ofd)setting

input mode
voltage input(pnp) type use of internal voltage(030vdc)
zero voltage input(npn) type (below 1k impedance during a short circuit and over 100k impedance while opened)

power failure compensation function
a function to memorize the factor value in case of power interception

input mode type couter, timer
couter : 5kind function(u, d, ud-a, ud-b, ud-c)
timer : 2 kind function(u, d)

ud-c among functions in an input mode
this is a function to control a position, etc. By using a counter and encoder with a phase difference input, and can set values of changing length per pulse, liquid quantity, position, etc. (free scale).

time range timer
possibility to set separately set hour, minute and second of the time range in a function setting mode

special function output
a function to be operated by a setting value without being affected by the function setting mode and output operation mode(cnt-700)

heater disconnection alarm and sensor disconnection alarm
10 kinds of alarms
on/off timer output function

he clinical thermometer is always the best choice to evaluate the human temperature. But considering the hygiene and time consumed during the group monitoring, our ST631 could be the best alternative to reduce cross-contamination and potential spread of diseases.