Global Alarms Safety & Security Equipment LLC Dhabi

The Zone Finder range of conventional fire detection and alarm panels is a highly cost effective option for small building premises requiring coverage for up to twelve detection zones. Certified to EN54 parts 2 & 4, the Zone Finder panels incorporate an integral power supply with space for standby batteries. Two versions are available, the Zone Finder offering 2 or 4 detection zones and the Zone Finder PLUS, offering 2 through to 12 detection zones. Both versions offer individual zone selection for conventional or Twin Wire operation along with one-man walk test mode facility and false alarm management options. Activation of controls is available via key switch or pass-code entry. In addition, the Zone Finder Plus can be fitted with High Spec Expansion cards to provide additional sounder, relay and switched -ve outputs. A fully functional repeater panel is available which communicates using a 2 core data cable with the main ZoneFinder PLUS panel via a plug in comms card. The comms card also incorporates 6 programmable switched -ve outputs. FEATURES : 2 to 128 Zone versions available Fully Approved by LPCB to EN54-2 & 4 Twin-Wire option selected via integral switches False alarm management Integral detector removal monitoring Integral Switch Mode PSU and battery space 2 Monitored sounder circuits 2 Auxiliary VFCO (1x Fire) (1x Fault) Class Change and Alert input Test Mode including One Man Walk Test Control Enable via key switch or passcode TECHNICAL SPECIFICATIONS : Monitored Outputs : Standard 2x rated 500mA at 28vdc where additional circuits are fitted, ensure 2.4A is not exceeded across all circuits Relay Outputs : 1x Fire 1 x Fault each VFCO rated at 3A @ 30V dc Power Supply : Zone Finder - 1.5 amp at 28vdc (space for 2x 3, 2Ahr batteries) Zone Finder Plus - 3 amp at 28vdc (space for 2x 7Ahr batteries) Cabinet : 1.2mm Mild Steel - finish Surf Mist Ripple Weight : Zone Finder - 4kg, Zone Finder Plus - 5kg IP rating : IP 30 Temperature : -5° C to +40°C max RH 95%

Conventional Fire Control Panel with 6 zones according DIN VdE 0830, English version. FEATURES : 6 zones for conventional detectors Hochiki CDX range or Apollo Series 60/65/Orbis 6 digital electronic outputs 1 relay output fault condition 6 relay outputs alarm condition Monitored power output for sounders / strobes Alarm indication LED for each zone Panel checks the system functions continuously Battery charger max. 1 x 7, 0Ah / 12V) TECHNICAL SPECIFICATIONS : Mains AC : 230 V AC / 50 - 60 Hz Operating voltage : 12 V DC Power consumption : 25 VA Sounder output : max. 300 mA / 12 V Battery : max. 1 x 7, 0 Ah / 12 V Operating temperature : 0 to +40 °C IP rating : IP 40 Housing : ABS, RAL 7035 Weight : 2 kg w/o batteries Dimensions (WxHxD) : 325 x 240 x 80 mm

MTPAD – 1 Door Standalone Keypad MTPAD-M – Slave Wiegand Keypad FEATURES: Operates on 12/24V AC/DC Backlit keys 99 User codes (1 to 8 digits) 30 sec lockout after 8 invalid codes 1 Relay (2A /24V DC, 120V AC), 1 transistor (100mA) 2 outputs that operate in pulse (01 … 99 sec) or latch mode (00) 1 Pushbutton Power switching regulator for longer product life Resin Potted electronics Dipswitch to regain default settings Tamper switch for higher security Current Consumption Standby: 30 mA, Maximum: 100 mA Dustproof and waterproof (Ip66)

Indoor/outdoor usage 3x4 keyboard Resin potted Vandal-resistant zinc alloyed housing All Weather conditions Invalid code lockout feature after 8 consecutive errors (30 sec) Tamper protection (Reed Switch, magnet) Yellow LED and buzzer for programming and status indication Green LED indicates relay activation (output 1) Red LED indicates transistor status (output 2) Tactile zamac keys having positive Potted keypad Dipswitch for regaining the default factory settings Microcontroller and EEPROM Two piece design for easy mounting