Post Buy Requirement
GH
Abu Dhabi, United Arab Emirates
Verified Add Review

Other Products / Services

Infrared Temperature

Main Features:
- Precise non-contact IR thermometer, safe and easy to use.
- Simply point to an object and read its temperature.
- Laser sight allows accurate targeting.
- Consist of optics, temperature sensor, signal amplifier, processing circuit and LCD display.
- Laser on / off switch, auto power off and temperature data hold.
- 20 seconds auto power off.
- Celsius and Fahrenheit switchable.
- Suitable for hot water pipes, hot engine parts, cooking surfaces, hot tubes insulation, electrical connection, ballasts in electric lights, electric motors, bearings, wine coolers hot asphalt, swimming pools, fish tanks, hot and cold food products, heating air conditioning, etc.


View Complete Details

Anemometer MS6252A Mastech

Overview


  • Work height: Maximum 2000m

  • Work mode:Frequency of wind speed conversion

  • Display LCD

  • Maximum show value: 9999

  • Sampling time: About 0.4s/time

  • Low battery indicator:sign displays on LCD.

  • Work power: 1*9V 6F22 battery.

  • Operation environment:
    Relative humidity -- 085%RH, no moisture condensation.
    Temperature -- 040, no moisture condensation.

  • Storage environment:
    Relative humidity -- 080%RH, no moisture condensation.
    Temperature -- 1050, no moisture condensation.

  • Dimension: Meter -- 165L*85W*38Hmm

  • Weight: About 200g

  • Safety rating:CE RoHS


Features



  • Display: 9999 counts

  • Color Display:Auto Power Off

  • Flow Area Setting

  • MAX/MIN

  • / Selection

  • Data Hold

  • Display Backlight

  • Low Battery Display


Specs

View Complete Details

Digital Thermometer K Type 2 K-Type Sensors

ScientificThermometerNicety DT821A


2 K-Type Sensors


Precision Display in 0.1 Steps


Measures -328 to2372 F (-200 to 1300 C)


This is a brand new, high quality thermometer for contact temperature measurements. It has two inputs for K-type thermocouples and can display the temperature in 0.1steps.


It can be used in HVAC trade to check air conditioners, heaters or furnaces with high precision.


It is also great for science projects, the laboratoryand whenever you need a precise measurement oftemperatures.


It comes with two 3 ft (1 m) temperature probe, these have a glass fiber insulation and work up to about 500F (260C), but any other K-type probe with miniature thermocoupleconnector can be used. To use the thermometer for temperatures above 500 degree F you would need a special thermocouple with a ceramic insulation (not included).


Specification:

View Complete Details

Portable Hardness Tester



State of the art, digital portable hardness tester is designed to test the hardness of large hard metal parts. Clean crisp display shows the incredible functions that can only be found on this new portable hardness tester such as auto-probe detection, auto direction detector, single and multi-point calibration make the HT-1800 the most versatile portable hardness tester in the industry.


The HT-1800 portable hardness tester can perform tests that easily convert to the most popular hardness scales, including Rockwell, Brinell, Vickers, Shore, etc.


Functions:

Easy to use keypad operation

Auto identification of Impact Device

Large LCD display with back light

Automatic conversions to: Brinell, Rockwell B & C, Vicker and Shore

Automatic mean value

Battery Indicator

Memory capacity (100 groups)

Standard Test Method for Hardness Testing: ASTM A956


Specifications:

Measuring range: HLD200-960

HRC19.8-68.5

HRB13.5-100

HB30-651

HV80-976

HS26.4-99.5

b375-2639

Accuracy: 6HLD (HLD=800)

Repeatability: 6HLD (HLD=800)

Resolution: 1HL, 1HV, 1HB, 0.1HRB, 0.1HRC, 0.1HS

Materials: steel & cast steel, alloy tool steel, stainless steel, grey cast iron, spheroidal iron, cast aluminum, brass, bronze, wrought copper alloy.

Impact devices: D (optional impact devices: C/G/DC/DL)

Memory capacity: 100 groups

Battery type: 4 * 1.5V, AAA alkaline

Operating temperature: -10 to 50 degrees C

Dimensions: 90*176*43mm

Shipping weight: 4.5KG


Standard Accessories:

Base instrument

Impact device D

Calibrated test block

Custom carry case

Cleaning brush

Operation manual


Optional accessories:

Impact devices; C, G, DC, DL


Operation:

Load the impact body

Place the impact body on your test piece

Push the button to begin testing and obtain reading


View Complete Details

Speed Guns

83.50 - 167 /EACH Get Latest Price
  • Type Speed Gun
  • Condition New
  • Display Type Digital Display

SPEED RADAR GUN BUSHNELL 10911 - 800.00AED EACH.

View Complete Details

Vibration Tester



ThisVibration MeterVM-6360is a useful tool in machinery vibration monitoring. It measuresacceleration(peak), displacement(peak to peak)velocityandrevolution(RPM) with high accuracy. The digital displayed vibration level is one of the best indications of machine running condition.


VM-6360uses anexternal accelerometerandmagnetic baseto improve frequency response and provide a more repeatable vibration reading. Frequency ranges are utilized for broad detection abilities. It use headphones as an electronic stethoscope to listen for bearing defects or other mechanical faults while taking readings


VM6360is ideal for fast and precise measurements of the speed the furthest common measuring parameter of the vibration measurement alternatively in cm/s (centimeter per second) or ft/s (foot/s).


It is specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes. In accordance withISO2954, it can also be used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines.


Features



  • Individual high quality accelerometer for accurate and repeatable measurements

  • Bearing condition monitoring function

  • Large and Clear LCD display

  • Light weight and easy to use

  • Piezoelectric accelerometerandmagnetic base

  • 5 Parameters: Velocity, Acceleration, Displacement, Speed (RPM) and Frequency

  • Wide frequency range (10 Hz 10 kHz) in acceleration mode

  • Automatic power off

  • Maximum Hold

  • Low Battery Indicator



Specifications



  • LCD Display: 4 digits, 18mm

  • Transducer: Piezoelectric accelerometer

  • Parameters measured: Velocity, Acceleration, Displacement, Speed (RPM) and Frequency



  • Measuring range:

    • Velocity (RMS): 0.01 40.00 cm/s (0 16.00 inch/s)

    • Acceleration (Peak): 0.1 40.00 m/s2(0.3 1312 ft/s2)

    • Displacement (Peak Peak): 0.001 - 4.000 mm (0.04 160.0 mil)

    • Speed: 60 99, 990 r/min (RPM) (Readings should be multiplied by 10 if the display show "10")

    • Frequency: 1 20 kHz





  • Frequency Range

    • Acceleration (Peak): 10 Hz 1 kHz (in "1" mode) and 10 Hz 10 kHz (in "10" mode) for bearing condition checking

    • Velocity (RMS): 10 Hz 1 kHz

    • Displacement (Peak Peak): 10 Hz 1 kHz





  • Accuracy: 5% n + 2 digits

  • Metric / Imperial conversion

  • Output: AC Output 2.0V peak full scale (load resistance: above 10k)

  • Power Supply: 4 x 1.5 AAA size batteries (not included)

  • Operating Temperature: 0 50 C (32 122 F)

  • Operating Humidity:
View Complete Details

Finger Saver Safety Tools

The Standard FingerSaver, the best seller out of the 3 in the FingerSaver product range. This FingerSaver is the ideal purchase for keeping hands away from danger during use with items such as a flogging spanner.
Description

Without the Finger Saver you are exposing yourself to potential hand or finger injuries. Your hands are your most important day to day tool. If you damage your hands, or particularly and more importantly, your fingers, you will be affected in everything you do.From getting dressed to washing your face; you will have a constant reminder of an injury that could have been avoided. Don't put your hands where they can be injured, stay safe. When using the FingerSaver you are able to keep your hands away from any potential danger of impact. The FingerSaver is designed to be held by you, or it can be held in position by a work colleague to further reduce the risk of injury. The FingerSaver tool allows you to mitigate any risk involved in the task at hand and it gives you the confidence to perform the work activity safely, without injury to your hands.

View Complete Details

DIGITAL LUX METER AND LIGHT METER

Easy-to-use light meter with USB interface, wide measuring range up to 400, 000 Lux, large LCD display, 40-segment analogue bargraph, relative mode and user-selectable measuring units. Ideal for environmental monitoring, health and safety checks, and industrial applications.



  • Measures both Lux and Footcandles (FC), user selectable

  • Range selection of 4 Lux ranges and 4 FC ranges

  • Impact-resistant ABS case with protective rubber boot

  • Silicon photo diode sensor and spectral response filter

  • Fully cosine corrected

  • Sensor connected to the instrument by a fixed approx 1.5 metre (approx) coiled cable

  • Measuring rate of 1.5 times per second

  • 43mm LCD display with backlight, 40 segment bar graph and function indicators

  • Data hold freezes measured values

  • Min/max memory

  • Peak min hold, peak max hold

  • Relative reading from user set value

  • Over range indication

  • Reset function

  • Auto power off after 20 minutes

  • USB interface for real time data output to PC or laptop

  • Impact-resistant ABS case with protective rubber boot

  • Supplied with carry pouch, rubber boot, Software, USB interface cable, protective lens cap & battery


View Complete Details

Gloss Meter


Application :
This very handy smart tool used very widely in production, at the lab, or with the customer related to the following industries :

-Floormaintenance
-Surfacecleaningqualitycontrol
-Stoneandtileglossmeasurement
-Qualitycontrolofpaintandink
-Polishedmetalsurface, measurement(chromeplating)
-Inspectionofpaintprotectionandwaxing
-Auto-bodypaintinspection
-Surfaceinspectionofplasticmoldings
-Evaluationofdetergentsandwashers
-Checkingmasonryandwashers
-Checkingbuildingexteriors
-Furniture Manufacture
-Yacht Manufacture

Features:
Light weight and portable
The 60 angle is universal for all applications
Measuring results on a wide and clear back-lit display.
Auto Power off Function
with high accuracy (1 gloss points)
Low power consumption: works40 hours and measures approximately 10000 data continuously
Highly damp proof , assures the instrument works under any terrible condition.
Low drift white light source of lumen : 6.0-7.01m to guarantee long term stability
The rock solid base and the extremely stable mounted optical components assures measurements to be accurate under all circumstances and conditions.
Covered by 2 years warranty

View Complete Details

Outdoor Thermometer Hygrometer

Features :

Indoor-outdoor Dual temperature sensor.
Max-Min Memory.
Recording the higher or lower temperature value every day.
The instrument has one string to deduct location behind one's back and prop up the board, can hang on the wall or put on the desk.

Specification :

Humidity measuring range :10% RH - 99% RH
Humidity measurement accuracy : 5% RH
Humidity resolution : 1%

Outdoor :-50C - 70C(-58F 158F), Indoor :-10C - 50C(14F 122F)
Accuracy : 1C , Analyze degree : 0.1C
Characteristic : 3 line of LCD display
Max outdoor temperature sensing distance : 1.5M
Change the battery : 1.5V AAA

Temperature survey method :
Press MAX/MIN key, measure the highest or lowest temperature value indoor and outdoor at present.
The indoor and outdoortemperature of environmental is written down, press RESET key to remove the value ofpresent.
PressC/F key to change the display C or F.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Ashok Kamra (Global Hardware and Tools Llc)
  • P.o. Box 48163, Abu Dhabi, United Arab Emirates ( Uae )
  • Share us via