Our Products
RR LED Lamps Adopts EMC3030 as light source with high lumen output, high uniformity in colour temperature, light efficiency product is widely used for residential and commercial indoor applications.
NYLON CABLE GLAND - WITH NUT - - GREY RAL 7035 - IP68
ITEM CODE | DETAILS | For cables Ø (mm) |
BOX /CTN | ||
GW52071 | PG CABLE GLAND PG7 | (3mm-6mm) | 50/900 | ||
GW52072 | PG CABLE GLAND PG9 | (5mm-8mm) | 50/600 | ||
GW52073 | PG CABLE GLAND PG11 | (7mm-10.5mm) | 25/500 | ||
GW52074 | PG CABLE GLAND PG13.5 | (9mm-12.5mm) | 25/500 | ||
GW52075 | PG CABLE GLAND PG16 | (13mm-16mm) | 25/375 | ||
GW52076 | PG CABLE GLAND PG21 | (8-10mm/17-20mm) | 25/400 | ||
GW52077 | PG CABLE GLAND PG29 | (13.5-15/21-26mm) | 25/250 | ||
GW52078 | PG CABLE GLAND PG36 | (17-20/30-34mm) | 10/130 | ||
GW52079 | PG CABLE GLAND PG42 | (36-39/40-43mm) | 6/120 | ||
GW52080 | PG CABLE GLAND PG48 | (38-40/46-50mm |
RR - 7535H
1 Gang flush Metal box size : 75 x 75 x 35mm
pre galvanished finish with cable entry knock outs
35mm height 1.1mm thickness
manufactured as per BS4662:2006
Inner Carton : 10 pcs
Master Carton : 300 pcs
RR - 7535E
1 Gang flush Metal box size : 75 x 75 x 35mm
pre galvanished finish with cable entry knock outs
35mm height 1.1mm thickness
manufactured as per BS4662:2006
Inner Carton : 10 pcs
Master Carton : 300 pcs
RR - 13535H
1 Gang flush Metal box size : 75 x 75 x 35mm
pre galvanished finish with cable entry knock outs
35mm height 1.1mm thickness
manufactured as per BS4662:2006
Inner Carton : 10 pcs
Master Carton : 300 pcs
RR - 13535E
1 Gang flush Metal box size : 75 x 75 x 35mm
pre galvanished finish with cable entry knock outs
35mm height 1.1mm thickness
manufactured as per BS4662:2006
Inner Carton : 10 pcs
Master Carton : 300 pcs
4ft 16/14 Earth Rod (5/8")
6ft 16 / 14 Earth Rod
4ft 19/17 Earth Rod (3/4")
Earth Rod Clamp Double Plated HD
These are made from copper with gunmetal plate
They can be supplied for all the rods from 5/8" to 1' and copper tape
Exhaust type
The fan shall be suitable for wall mounting
Condenser motor with thermo cut-off
Well lubricated bearing for long life operation
Propeller fan incorporated with advanced blade design enables powerful airflow at low noise
Automatic shutter
Orifice equipped with oil cup collects oil drops effectively
Pre-painted steel frame and shutter strengthen product durability
Installation size = 250 x 250 mm
Safety design base on IEC requirement
Our global product had been approved by each country requirement.
Automatic shutter series
Exhaust type
Wall mounting
Single speed
Automatic shutter
Advanced blade design
Air volume = 580 m3/h
Exhaust type
The fan shall be suitable for window mounting
Condenser motor with thermo cut-off
Well lubricated bearing for long life operation
Propeller fan incorporated with advanced blade design enables powerful airflow at low noise
Shutter operated by pull cord which switches on or off the fan simultaneously
Metallic shutter axis ensures smooth shutter movement and its endurance under strong wind
Extra construction cost for opening hole on the wall can be saved
Recommended glass thickness = 3 to 7 mm
Installation hole size = 186188 mm
Safety design base on IEC requirement
Our global product had been approved by each country requirement.
Cord-operated shutter series
Exhaust type
Window mounting
Single speed
Advanced blade design
Air volume = 210 m3/h
Compact size condenser controlled regulator
5-speed selection
Cut-off safety switch equipped
Fall prevention of blade adopted
Safety wire provided to prevent detachment of fan motor from rod
Thermal fuse prevents overheating or power surge
Permanently lubricated ball bearing assembly
Color : body (white), ring (gloss silver or non-gloss silver)
Standard regulator series
3-blade design
Prevention of product falling off
Compact size of regulator
48 inches (1, 200mm) blade span
Exhaust type
The fan shall be suitable for ceiling mounting
Condenser motor with thermal cut-off
Well lubricated bearing for long life operation
Pre-installed power cord
Unique design of double chamber minimizes noise transmission from fan and motor to exterior
High performance taper blade designed sirocco fan adopted to control air turbulence effectively
Installation size = 177x177 mm
Super quiet series
Exhaust type
Ceiling mounting
Single speed
Super low noise structure
Air volume = 85 m3/h
Distinctive wave shape blade delivers a smooth and turbulence-free airflow
Bell mouth construction incorporated with new blade enables operation with high static pressure
Durable powder coating ensure high rust-resistant capability
Unique drain mechanism avoids the ingress of water and dust into the motor for excellent durability
High performance totally enclosed motor with thermal cut-off
Able to be used over an ambient temperature range of from -10 to +50oC
Possible to install horizontally or vertically
Optional shutter available
High pressure series
Blade size = 400mm
Single phase
Reversible
High performance motor
Air volume = 3, 610 m3/h
RR-IGN70-400W 70-400W Aluminium Ignitor RR-IGN70-400W - 3L 70-400W Aluminium Ignitor 3 lines
RR-EBL 18-36 18W/36W Electronic Ballast with wire and clip , 220V -240V 50/60 Hz
RR-BL 18/40 18W Fluorescent Ballast, 220V -240V 50 Hz RR-BL 36/40 36W Fluorescent Ballast, 220V -240V 50 Hz
RR-MHBL70 - 70W Metal Hallide Ballast , 220V-240V , 50Hz
Cat No Description RR-TLD 18/54 18W T8 Fluorescent Tube 6500K RR-TLD 36/54 36W T8 Fluorescent Tube 6500K RR-TLD18/12000K 18W T8 Fluorescent Tube 12000K RR-TLD 36/12000K 36W T8 Fluorescent Tube 12000K RR-TL-10/20W/54 20W T10 Fluorescent Tube 6500K RR-TL-10/40W/54 40W T10 Fluorescent Tube 6500K RR-TLD 58/54 58W T8 Fluorescent Tube 6500K
LED floodlights - Frame in technopolymer - Dissipator, glass holder and bracket coupling in die-cast aluminium with very low copper content - Tempered glass, 4mm thick
Precision Mini / Maxi Trunking & Fittingsare manufactured from High Impact unplasticised polyvinyl chloride (UPVC) grade material capable of withstanding the most hazardous conditions on-site & exceeds the most stringent requirements of Indian and International standards. The product range brings a whole new world of sophistication and convenience to home, office & commercial establishments and is in accordance with Indian StandardsIS:14927 Part 2 and BS: EN 50085-2-1. Mini Trunking are also available with self fixing tape for instant and easy installation. Clip on lid provides security while allowing easy maintenance.
Precision Maxi TrunkingCable Management System is designed for convenience and safety with compartments for separate wiring applications. Maxi Trunking fittings are available in moulded and fabricated form, thus adding a sleek touch to your interiors.
Application :
To organize & protect cables on surface.
Features :
Fast installation & easy maintenance Secure & elegant look Wide range of sizes to suit all cabling requirements Durable & impact resistant Fire retardant Corrosion free Thermal resistant from -5C to +60C.
Colour:
Ivory & White. Other colours available on a made-to-order basis.
Material: High impact, warp-proof PVC, self-extinguishing, UL approved 94V-0. Color: Grey Maximum service temperature: 85 UL Test up to 50. These devices are for routing of wires within devices in factory installations. Features parallel holes on both sidewalls to facilitate cutting in wire application. Special color, size, length upon request of reasonable quantity.
The efficiency of power generation, transmission or conversion is improved when operated at near unity power factor. The least expensive way to achieve the same is by installing Power Factor Correction Capacitors.
TIBCON PFC Capacitors are designed and manufactured for most demanding applications and toughest ambient conditions. These Capacitors are made in accordance with Metalized Polypropelene technology with built-in SELF HEALING properties. We mastered this technology over a period of 30 years and have state of art manufacturing facility for metallization of the film. The elements are wound on fully automatic numerically controlled winding machine that ensure no corona discharge & ionization. The elements are housed in Cylindrical shaped aluminum case within built explosion proof safety device.
Unique Features
Applications
Tin-plated copper busbar helps upgrade design and provide the best quality for switchgears, switchboards, electrical panels, power transformers and busducts by:
Applications
Switchboards, Switchgears, Electrical Panels, Power Transformers, Busduct, etc.
Specification
Oriental Copper produces and supplies high quality tin-plated copper busbar as per International Standards such as JIS, DIN, BS and ASTM.
13A Extension Reel 25mtr STEEL BRENNENSTUHL With 3BSS Socket outlet (13A) 1198053
13A Extension Reel 50mtr STEEL BRENNENSTUHL With 3BSS Socket outlet (13A) 1198063
ALPHA LOC SS316 STAINLESS STEEL CABLE TIES COATED AND UNCOATED
Technical features
Epoxy and Pure Polyester coating.
Surface finish Metallic (Uncoated) and Black (Coated).
Temperature range -80 C to +500 C (Uncoated).
-80 C to +150 C (Coated).
Fireproof, UV resistant and Halogen free.
AVANS- ALPHA LOC-SS316 STAINLESS STEEL CABLE TIES |
EPOXY COATED |
150 X 4.6 |
200 X 4.6 |
250 X 4.6 |
300 X 4.6 |
360 X 4.6 |
450 X 4.6 |
520 X 4.6 |
6mm 2Pole Porcelain Terminals With Fixing Hole 41A 123212 Kistenmacher
10mm 2Pole Porcelain Terminals With Fixing Hole 57A 124212 Kistenmacher
6mm 3Pole Porcelain Terminals With Fixing Hole 41A 123213 Kistenmacher
10mm 3Pole Porcelain Terminals With Fixing Hole 57A 124213 Kistenmacher
16mm 3Pole Porcelain Terminals With Fixing Hole 76A 125213 Kistenmacher