Post Buy Requirement
HI
Dubai, United Arab Emirates
Add Review

Our Products

Steel Jubilee Clamps

Aeroduct Stranglehold Banding/Jubilee Clamp are zinc protected mild steel. This is most popular clip in our range. Ideally suited for most day requirements for joining hose in areas such as the HUAL industry and the automotive aftermarket, agricultural application, such as irrigation and farm machinery, pneumatic and hydraulic application in the industrial sector, hardware/DIY applications and in construction.
Thickness: = 0.6 mm, Width: 9 mm

View Complete Details

Bridge Expansion Joints

Laminated Rubber bearing consists of multilayer Rubber and thin steel sheet via vulcanization and adhesion. It has stuffiest vertical rigidity and is able to reliably transfer the opposite force of the upper structure to piers and it possesses very good elasticity to suit to the turn of the beam end.
View Complete Details

Flexible Duct Connector

All mechanical equipment like Air Handling Units, Fan Coil Units and Ventilation Fans generate noise and vibrations when used. To eliminate the noise and vibrations from transmitting through the air ducts, it is necessary to install an airtight flexible joint between the outlet of the equipment, and the inlet of the ducts. During manufacturing, the joint formed by attaching a layer of fabric to two strips of metal on either side is called a Flexible Duct Connector.The most critical part of this Flexible Duct Connector is the fabric which has to be selected to suit the typical requirements of each installation.

View Complete Details

Flexible Ducts

Aeroduct Flexible Duct is a tough, completely flexible and low weight duct which is extensively employed in ventilation and air conditioning structure for residential, commercial and industrial applications. Our manufactured ducts shows great efficiency when installed correctly and is a perfect option for all air ventilation systems including homes, hotels, offices and commercial buildings since it is very suitable for connecting supply air outlets to rigid ductwork. Aeroduct flexible ducts are available in insulated and un-insulated models, both of these give high degree of flexibility, which permit us to easily connect in any preferred position and save us costs, where fitted and fabricated ducts would be highly difficult and costly to install.

View Complete Details

Insulated Flexible Duct Connector

For acoustically treated ductwork and supply ducts, it is important that the fabric of the connector is also insulated in-addition to the insulation fixed on the ducting. This enables the flexible duct connector to achieve maximum effectiveness.


Externally, during manufacturing, insulating the fabric may damage the coating on it, and also make it stiff there by effecting the noise and vibration absorption properties of the fabric. Aeroduct has a complete range of Insulated Duct Connectors which use a 25mm thick fiberglass insulation of R value 4.2, sandwiched between the 2 layers of fabric. The various options of fabrics offered in insulated models, ensure that the flexible duct connectors can be used for all possible types of ductwork installations.


All models of insulated connects from Aeroduct are available in 24 gauge and 28 gauge steel.

View Complete Details

Insulation Fasteners

AeroductInsulation Fasteners (IF) are an economical and effective solution for your insulation fastening needs. Aeroduct insulation fasteners are manufactured and designed to meet SMACNA Standards utilizing steel as per ASTM-A 591. It has a 28 Gauge Metal Base. with a size of 50mm x 50mm. Pins are 12 Gauge Zinc Plated and packaging is done with 500 pieces per box with SW washers.


Types available are,


Self Adhesive Type Steel nail reinforced and plain base options


Self Adhesive Type Aluminium nail easy to bend and cut


Perforated Base Type Available in both steel and aluminium nail.

View Complete Details

EPDM Profile System

Rubtech EPDM Building Profiles are used in Building construction industries for Aluminum frames of Doors and windows-Sliding Hinged type.
Container Seals
Rubtech container seals are used to prevent air, moisture and water from entering into the container and they help in preservation of the stored articles.
Automotive Profiles
Rubtech solid- sponge co extruded profiles are used around doors of automobiles to keep water and dust out. Their two parts- the solid fastening and the seal (bulb and or lips) in sponge rubber are co extruded.
View Complete Details

NBR Rubber Insulations

NBR is a flexible light-weight nitrile foam suitable for thermal insulation. The product is available in tubing and sheet form and mainly comes in black color (other colors are also available.) The extruded flexible tubing is designed to fit the standard diameters of steel and copper piping. Sheets are available in pre-cut size or in rolls.
Features
Low Thermal Conductivity
No Flame Spread
High Water Vapor Diffusion Resistance
Environmental Friendly
Ease of Installation
Major Applications
HVAC air ducts(round or rectangular)
Water pipelines with large diameters
Water tanks , Under slab, Raised floors
AHUs, FCUs and other equipment
View Complete Details

Rubber Impact Protection Systems

Wheel Stoppers are designed to provide good energy absorption from vehicle impact, thus protecting the anchor bolts from the impact. The anchor bolts are protected from direct stress unlike in concrete stoppers where all the force is transferred to the anchor bolts.
View Complete Details

Rubber Fenders System

Rubber Fenders are designed to prevent boatsships and the dock from being damaged during the mooring process or during berthing process.
MATERIALS
The Fenders are made of high impact resistant extruded rubbers either in EPDM or Natural Rubber. Standard color is black. Coloured fenders are available on request. They have excellent weather resistance, ozone resistance, crack resistance and high abrasion resistance.
TYPES
The Fenders are available in the following types.
D-Fenders
Cylindrical-Fenders
Arch V-Fender
Block Fender
Cone Fender
Cell Fender
W & M Fender
Wing Fender
Customized Fenders can be manufactured as per client requirement.
STANDARD LENGTH
View Complete Details

Anti Vibration Mounting Pads

Ribbed Mounting Pad
Alternate High Low Ribbed Construction.
Easy to Cut Pads can be cut to be slightly larger than the size of the leg or machine, using shears or knife.
Easy Field Installation
Multiple layers of Ribbed Mounting Pad can be used to increase deflection.
Cork Sandwich Pad
Cork sandwich Pads are laminated pads having 12 thick close grained cork securely bonded between two layers of14 alternate low high ribbed Neoprene rubber pads.
Offers highest level of sound attenuation and vibration isolation.
No need for bolting
Easy Field Installation
Metal Sandwich Pad
Metal Sandwich Pads are constructed of a steel plate bonded between Ribbed Anti Vibration Pads.
Designed for very high load capacity.
Waffle Pads
Designed with in built suction cups.
Easy Cut design without tools allows job site flexibility.
No need for bolting.
Easy Field Installation.
View Complete Details

Bridge Bearing Joints

Laminated Rubber bearing consists of multilayer Rubber and thin steel sheet via vulcanization and adhesion. It has stuffiest vertical rigidity and is able to reliably transfer the opposite force of the upper structure to piers and it possesses very good elasticity to suit to the turn of the beam end.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Roderick (Hira Industries LLC)
  • P.O.Box 50673, Dubai Investments Park 2. Dubai, United Arab Emirates
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/uae/company/hira-industries-llc-company4993424/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0007457720{main}( ).../index.php:0
20.07422024096include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.10132746408include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.11163682120header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice