Our Products #4993424

Aeroduct Stranglehold Banding/Jubilee Clamp are zinc protected mild steel. This is most popular clip in our range. Ideally suited for most day requirements for joining hose in areas such as the HUAL industry and the automotive aftermarket, agricultural application, such as irrigation and farm machinery, pneumatic and hydraulic application in the industrial sector, hardware/DIY applications and in construction. Thickness: = 0.6 mm, Width: 9 mm

Laminated Rubber bearing consists of multilayer Rubber and thin steel sheet via vulcanization and adhesion. It has stuffiest vertical rigidity and is able to reliably transfer the opposite force of the upper structure to piers and it possesses very good elasticity to suit to the turn of the beam end.

All mechanical equipment like Air Handling Units, Fan Coil Units and Ventilation Fans generate noise and vibrations when used. To eliminate the noise and vibrations from transmitting through the air ducts, it is necessary to install an airtight flexible joint between the outlet of the equipment, and the inlet of the ducts. During manufacturing, the joint formed by attaching a layer of fabric to two strips of metal on either side is called a Flexible Duct Connector.The most critical part of this Flexible Duct Connector is the fabric which has to be selected to suit the typical requirements of each installation.

Aeroduct Flexible Duct is a tough, completely flexible and low weight duct which is extensively employed in ventilation and air conditioning structure for residential, commercial and industrial applications. Our manufactured ducts shows great efficiency when installed correctly and is a perfect option for all air ventilation systems including homes, hotels, offices and commercial buildings since it is very suitable for connecting supply air outlets to rigid ductwork. Aeroduct flexible ducts are available in insulated and un-insulated models, both of these give high degree of flexibility, which permit us to easily connect in any preferred position and save us costs, where fitted and fabricated ducts would be highly difficult and costly to install.

For acoustically treated ductwork and supply ducts, it is important that the fabric of the connector is also insulated in-addition to the insulation fixed on the ducting. This enables the flexible duct connector to achieve maximum effectiveness.

Externally, during manufacturing, insulating the fabric may damage the coating on it, and also make it stiff there by effecting the noise and vibration absorption properties of the fabric. Aeroduct has a complete range of Insulated Duct Connectors which use a 25mm thick fiberglass insulation of R value 4.2, sandwiched between the 2 layers of fabric. The various options of fabrics offered in insulated models, ensure that the flexible duct connectors can be used for all possible types of ductwork installations.

All models of insulated connects from Aeroduct are available in 24 gauge and 28 gauge steel.

AeroductInsulation Fasteners (IF) are an economical and effective solution for your insulation fastening needs. Aeroduct insulation fasteners are manufactured and designed to meet SMACNA Standards utilizing steel as per ASTM-A 591. It has a 28 Gauge Metal Base. with a size of 50mm x 50mm. Pins are 12 Gauge Zinc Plated and packaging is done with 500 pieces per box with SW washers.

Types available are,

Self Adhesive Type Steel nail reinforced and plain base options

Self Adhesive Type Aluminium nail easy to bend and cut

Perforated Base Type Available in both steel and aluminium nail.

Rubtech EPDM Building Profiles are used in Building construction industries for Aluminum frames of Doors and windows-Sliding Hinged type.Container SealsRubtech container seals are used to prevent air, moisture and water from entering into the container and they help in preservation of the stored articles.Automotive ProfilesRubtech solid- sponge co extruded profiles are used around doors of automobiles to keep water and dust out. Their two parts- the solid fastening and the seal (bulb and or lips) in sponge rubber are co extruded.

NBR is a flexible light-weight nitrile foam suitable for thermal insulation. The product is available in tubing and sheet form and mainly comes in black color (other colors are also available.) The extruded flexible tubing is designed to fit the standard diameters of steel and copper piping. Sheets are available in pre-cut size or in rolls.FeaturesLow Thermal ConductivityNo Flame SpreadHigh Water Vapor Diffusion ResistanceEnvironmental FriendlyEase of InstallationMajor ApplicationsHVAC air ducts(round or rectangular)Water pipelines with large diametersWater tanks , Under slab, Raised floorsAHUs, FCUs and other equipment

Wheel Stoppers are designed to provide good energy absorption from vehicle impact, thus protecting the anchor bolts from the impact. The anchor bolts are protected from direct stress unlike in concrete stoppers where all the force is transferred to the anchor bolts.

Rubber Fenders are designed to prevent boatsships and the dock from being damaged during the mooring process or during berthing process.MATERIALSThe Fenders are made of high impact resistant extruded rubbers either in EPDM or Natural Rubber. Standard color is black. Coloured fenders are available on request. They have excellent weather resistance, ozone resistance, crack resistance and high abrasion resistance.TYPESThe Fenders are available in the following types.D-FendersCylindrical-FendersArch V-FenderBlock FenderCone FenderCell FenderW & M FenderWing FenderCustomized Fenders can be manufactured as per client requirement.STANDARD LENGTH

Ribbed Mounting PadAlternate High Low Ribbed Construction.Easy to Cut Pads can be cut to be slightly larger than the size of the leg or machine, using shears or knife.Easy Field InstallationMultiple layers of Ribbed Mounting Pad can be used to increase deflection.Cork Sandwich PadCork sandwich Pads are laminated pads having 12 thick close grained cork securely bonded between two layers of14 alternate low high ribbed Neoprene rubber pads.Offers highest level of sound attenuation and vibration isolation.No need for boltingEasy Field InstallationMetal Sandwich PadMetal Sandwich Pads are constructed of a steel plate bonded between Ribbed Anti Vibration Pads.Designed for very high load capacity.Waffle PadsDesigned with in built suction cups.Easy Cut design without tools allows job site flexibility.No need for bolting.Easy Field Installation.

Laminated Rubber bearing consists of multilayer Rubber and thin steel sheet via vulcanization and adhesion. It has stuffiest vertical rigidity and is able to reliably transfer the opposite force of the upper structure to piers and it possesses very good elasticity to suit to the turn of the beam end.