Interplast Co Ltd

Sharjah, United Arab Emirates

• Range• Single Phase • Three Phase • Single Door • Double Door

Electrical energy has brought along with it a lot of conveniences, beyond imagination. It's consumption has increased manifold be it in domestic, commercial or industrial applications, there by creating a need for scientific & effective method of distribution. The purpose of electrical wiring is to systematically distribute current. In the process the system adopts methods to product hazards such as short circuit, over load and earth leakage The electrical wiring is carried out to distribute current from a single source of supply to various circuits, such an arrangement is made inside an enclosure called Distribution board The distribution board is not merely an enclosure but a comprehensive system in itself, comprising of copper busbars, brass neutral links, earth links to facilitate effective distribution of current, It incorporates safety devices such as MCB's, ELCB's and Isolators, which serves to protect the installation. A wide range of compact, elegant & economical DB's with unique features, designed & engineered to provide user safety, convenience and operational maintenance advantages are offered

• Range6A to 40A "B" Curve 0.5A to 63A "C" Curve 0.5A to 63A for "DC" Application
• AccessoriesAuxiliary Switch Shunt trip

Electrical distribution needs are continuously evolving in residentional, commercial and Industrial sectors. Improved operational safety, continuity of service, greater convenience and operating cost have assumed a tremendous significance. Miniature circuit breakers have been designed to continuously adapt to these changing needs.

• Sensitivity30mA , 100mA, 300mA
• Range25A-63A

The flow of current through electrical facilities always involves risks. Poorly insulated equipment, faulty wires and incorrect use of an electrical device cause currents to flow through the wrong path (i.e through the insulation) to the earth. This current is called "leakage current". Earth leakage is an electrical hazard and is responsible for electrical shocks and fire risks. Earth leakage and its associated hazard can be prevented by residual current circuit breaker (RCCB), also popularly known as ELCB

• Range40A, 63A , 80A , 100A

They are switch disconnectors with independent manual operation, capable of making, carrying and breaking currents under normal circuit conditions , which may include operating overload condition and also carry currents under specified abnormal circuit conditions such as those of short circuit for a specified time.

DECOVOLT RECESSED AND SURFACE MOUNTED LUMINARIES ARE SUITABLE FOR GENERAL LIGHTING, APPLICATIONS IN INDOOR AREAS SUCH AS OFFICES, COMPUTER ROOMS, SCHOOLS, HOSPITALS AND COMMERCIAL AREAS SUCH AS SHOPS DECOVOLT WEATHER PROOF LUMINARIES ARE SUITABLE FOR DAMPDUSTY ENVIRONMENTS SUCH AS INDUSTRIAL PREMISES, FACTORIES, POWER PLANTS, POWER DISTRIBUTION STATIONS, WAREHOUSES CAR PARKS. MATERIAL FINISH CHASSIS OF RECESSED AND SURFACE MOUNTED FIXTURES ARE MADE OF CRCA SHEET STEEL, CHEMICALLY CLEANED, TREATED PHOSPHATED & POWDER COATED WITH RAL 9010 ON BOTH SIDES, TO GIVE HIGH REFLECTIVE SURFACE FINISH DECOVOLT WETHER PROOF HOUSING MADE OF COMPRESSION MOULDING GLASS REINFORCED POLYESTER (GRP), DIFFUSER UV STABILIZED PMMA POLYCARBONATE, TRAY PRETREATED WHITE POWDER COATED CRCA SHEET STEEL END CAPS ARE MOULDED POLYAMIDE 66, IT ALLOWS EASY ASSEMBLY OF LAMP HOLDERS GASKETS ARE MOULEDE POLYURETHANE RUBBER WHICH PROVIDES FOR IP-65 BALLASTS ARE ENERGY EFFICIENT WITH LOW ENERGY LOSS, NOISELESS OPERATIONS, LOW OPERATING TEMPERATURE, AND MINIMUM TEMPERATURE RISE, ELECTRONIC BALLAST OPTIONAL LAMP HOLDERS ARE WITH G5 AND G13 BASE AND BODY, MADE OF FLAME RETARDANT POLY CARBONATE PLASTIC AND PHOSPHER BRONZE CONTACT STARTER HOLDER ARE MADE OFF LAME RETARDANT POLYCARBONATE PLASTIC WITH PHOSPHER BRONZE CONTACT LOCKING CLIPS ARE MADE OF POLYCARBONATE STAINLESS STEEL INTERNAL WIRING WITH PVC INSULATED HEAT RESISTANT SINGLE STRAND COPPER WIRE.