United Arab Emirates
Our Products
We offer a complete product range of distributors systems, Multiple Tank System, Dosing Tank, JMA Controller and Tanks Reverse Osmosis System Round
Our distributors systems are designed for water treatment systems. They will fit pressure vessel diameter sizes for 7"-80". The hub & lateral system features threads connection which can assure you on safety in the operation. The unique slot design assure a uniform, vertical distributor of flow throughou the entire bed, without channeling.
The MTS commercial water purification system is designed to supply uninterruptible purified water around the clock. It applies widely to apartments, boilers, cooling towers, hotels, nursing homes, carwashes, milk plants, factories, laundries, resorts, restaurants, reverse osmosis pretreatment, office buildings and hospitals, etc. With our engineering optimization and full test, please be assured that the system provides you reliable performance with minimum maintenance required. All components used in the MTS commercial water purification system have been strictly inspected and tested.They are all standard components and can be delivered from the stock immediately to answer your needs of replacement. Unique Advantages Low use cost and flexible expansion MTS system can be easily expanded by adding tanks as needed. So it requires lower initial investment compared with traditional large single tanks and dual-tank systems. Simple installation and maintenance It is very simple to install and maintain the MTS system. A service technician familiar with common civil products can handle the installation and maintenance easily. High-Flow BNT951 Control System The BNT951 control valve is a patented control system independently developed by Canature with the maximum flow up to 50.0GPM* (11.3T/H). *Used to control the valve flow rather than the systematic overall flow Corrosion-resistant FRP Tanks The system adopts the high-quality FRP tanks (U.S. NSF-certified) manufactured by Canature and the food-grade HDPE (high density polyethylene) liner, which is safe, reliable and corrosion-resistant. High Flow Water Distribution System The high-flow water distribution system is made of durable and corrosion-resistant ABS materials, to ensure the smooth system operation.
MA stager controller functions: ◆ Password setting ◆ Calendar ◆ Regeneration stage and regeneration time indication ◆ JMA can be initiated manually or through remote control. Timer initiation and interval initiation are also available. ◆ Manual step by step initiation (only for system commissioning) ◆ Reset function ◆ Stages (1-8) and stage duration (5-9999 Sec) settings ◆ System working stage indication (Service or regeneration stage indication) ◆ Data protection after power cut: settings and data can be stored for 3 years. ◆ Waterproof and rotproof enclosure Stager working principle: The stager may be manually operated or driven by an electric motor that operated through an adjustable timer or flowmeter program. The stager functions by opening and closing its ports, singly or in combination, in a sequence that fit the need of the system. The “positions” in the sequence correspond to the number of “stager” in the process (See chart 1). The port that are opened allow the pressurized fluid to flow to and operate some diaphragm valves, while venting other valves—allowing them to return to their normal positions. The stagers can use either hydraulic or pneumatic control fluid. Continuous electrical power is not required to maintain the positions of the valves such as in a solenoid operated system. Greatly avoid the system breakdown because of power failure. All types of complex application can be controlled by stager controller system through correct design and combination of the stagers
Description | table type electric cooling(hot&cold) | |
02 | Cold Water Tank Capacity | / |
03 | Hold Water Tank Capacity | 0.8L |
04 | Cooling Capacity | 0.75L/h |
05 | Heating Capacity | 5L/h |
06 | Cold Water Temperature | 10-15℃ |
07 | Hot Water Temperature | 85-95℃ |
08 | Cooling Power | 75W |
09 | Heating Power | 550W |
10 | Compressor brand | / |
11 | Water Faucet Connection | Fixed |
12 | Hot&Cold Tank Material | SS hot tank, plastic water tank. |
13 | Hot&ColdTank Structure | Welding or belt |
14 | Left&Right Side Panel Thickness | 0.5mm |
15 | Inner Silicon tube Level | Food Grade |
16 | Refrigerant | / |
The core and string of super pure grade string wound filter cartridge is made of 100% food grade polypropylene, excluding sillcon, fluorescene agent, oil, etc. It is used for electroplanting industry and food industry. Using 100% food grade Polypropylene(pp) as material, the filter cartridge constains no wetting agents, solvents, antistatic agents or binders; Each micro rate has its string patten to ensure the filtration effect. The filter cartridge has a better dirt-holding capability than the general PP Sediment Melt Blown Filter Cartridge.Apply to liquid fitration in the fields of petroleum, chemical, electrionic, electroplanting, medicine and food production.
water distributor
Get Best Quote