dubai, United Arab Emirates
Our Products
With the risk of falling or moving objects, bumps and penetration injuries from static objects and of course slips, trips and falls, wearing safety helmets in the workplace is not only a requirement but a piece of common sense. In a range of colours and fully adjustable, our safety helmets and bump caps provide that last line of defence against head injury at low trade prices. Both Panoply and Venitex ranges are CE marked and ready for immediate delivery.
Whether you are looking to offer protecting to your employees or regular contractors or to visitors to a site where dangerous levels of noise are present our ear defenders have the solution for you. Ear defenders can be used alone or in combination with visors and faceshields for more regular exposure to damaging noise levels. You can also supply ear defenders to visitors either of padded design or for limited exposure in the form of disposable earplugs available in packs or a dispenser. Venitex ear defenders available now online at trade prices.
Either as a stand alone piece of PPE or as part of a combination of equipment, eye protection can often be overlooked for the sake of a few saved minutes, The risk of serious eye injury from a wide range of hazards in the workplace is real and we provide eye protection at trade prices to encourage use as well as to help compliance with current health and safety legislation. Our eye protection systems are all CE marked and satisfy the relevant ISO EN standards. With stock from Venitex and DeWalt, all are available for immediate online ordering and home delivery.
Whether the hazard be chemical or biological contamination, sharp objects, abrasive surfaces, extreme temperature or simply water, we have a safety glove to suit. Fully CE marked and manufactured and tested in accordance with the relevant ISO standard, our gloves are designed to be used with a range of PPE and in a variety of situations. With brands such as Venitex and DeWalt available at trade prices, place your order online now for fast delivery.
This powerful flashlight was designed with one thing in mind: SAFETY. It carries more approvals than any other flashlight on the market today, making it safe for any hazardous environment or condition. The SabreLite is o-ring sealed with a twist-on shroud and comes with a polarity battery guard tray that safeguards against dangerous "outgassing" of hydrogen from an accidentally reversed cell. It is powered by 3 C alkaline cells, submersible, and has an ABS resin body which resists chemicals, corrosion, and extreme temperatures. Unlike ordinary flashlights that produce a yellow beam, the SabreLite's incredibly bright Xenon lamp produces a powerful collimated white beam. Pelican's SabreLite is the leader in quality and performance.Minimum Pack 6 ea.Packaged Weight: 6.8 oz.Assorted Packs available - 2 black, 2 yellow, 2 orange
| SabreLite 2000 Flashlight Approvals | ||
| Class I, Div. 2; Gp ABCD, T3C; Class ll; Div. 2; Gp G. | ||
| Class l, ll, Div. 2; Gp. ABCD/G , T3C. | ||
| Listed 4S67/E184884 Class I, Div. 1; Gp.C, D / Class l; Zone 1; Gp.llA; llB; T3C | ||
| 10C-629-2 | ||
| IEC Ex TSA 06.0021X Ex ib e IIC T4 IP67 | ||
1020 MICRO CASE
GREAT FOR RUGGED SPORTS - NOT FOR SWIMMING OR SUBMERGINGAvailable in clear with color liner or solidEasy open latchRubber liner for extra protection doubles as o-ring sealAutomatic Pressure Equalization Valve - balancesinterior pressure, keeps water outStainless steel hardwareCarabinerLifetime Guarantee of ExcellenceWater resistant, crushproof, and dust proof
Colours: Black, Yellow, Blue, Red
| 1020 Micro Case Specifications | |||
| Exterior Dimensions (L x W x D) | Interior Dimensions (L x W x D) | ||
| 6.82" x 4.75" x 2.12" (17.3 x 12.1 x 5.4 cm) | 5.31" x 3.56" x 1.68" (13.5 x 9 x 4.3 cm) | ||
| Lid Depth | Bottom Depth | Total Depth | |
| 0.69" (1.8 cm) | 0.94" (2.4 cm) | 1.63" (4.1 cm) | |
| Interior Cubic Volume | |||
| 0.02 cubic feet (0.52 cubic decimeter) | |||
| Weight with foam | Weight without foam | Buoyancy Max. | |
| 0.56 lbs. (0.25 kg) | 0.55 lbs. (0.25 kg) | 0.75 lbs. (0.34 kg) |
|
| Range Temperature | |||
| -10 / 199.4° F (-23 / 93° C) |
|||
| 1020 Micro Case Certificates | |||
| • IP67 (1 meter submersion for 30 minutes) |
| 1020 Micro Case Accessories | ||
| Cat. # | Description | |
| 1021 | Replacement Case Liner | |
| 1022 | Pick N Pluck™ Foam Insert | |
| 1020 Micro Case Configurations | ||
| Cat. # | Description | |
| 1020 | 1020 Micro Case | |
| 1020MOC | 1020 Micro Case Mossy Oak (Black Liner Only) | |
Approvals & Standards
V-Gard Slotted Caps and Non-Slotted Hats meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (Class E), and also as outlined in CSA Z94.1-2005 (Class E) with 1-Touch and Fas-Trac Suspensions.
V-Gard Caps and Hats also meet the ANSI/ISEA Z89.1-2009 voluntary standard for reverse donning and low temperature.
Hi-viz orange and hi-viz yellow-green V-Gard Caps and Hats meet the ANSI/ISEA Z89.1-2009 voluntary standard for high visibility as well.
WARNING: Do not mix suspension and helmet sizes. Make sure the sizes match (i.e., standard-size suspension with standard-size helmet). Use only MSA suspensions on an MSA helmet. Failure to comply with the above will reduce the energy-absorbing ability of the protective helmet, which can result in serious injury or death.
Applications
AgricultureConstructionElectric UtilityHazardous MaterialsNuclearOil & GasPaper & Pulp
Hazards
Confined SpaceElectrical ShockOverhead Falling ObjectsSplashWelding
Product Information
Consist of a polyethylene shell and suspension working together as a protection system. Cap or hat styles, available in three cap sizes, small (6 to 7-1/8 inches), standard (6-1/2 to 8 inches) and large (7-1/2 to 8-1/2 inches) and the hat is 6-1/2 to 8 inches
