Our Products #5086854

Working Range (Max.): 1000 x 500 mmMachines integrated into a BacktoBack Configuration Sawing-Drilling system for BeamProfile ProcessingComplete with roller conveyors & cross-transport system, length measuring system, safety system and machine software packageIn perfect working conditionPricing inclusive of Freight, Installation, Commissioning, Training and 6 Months Manufacturers Warranty

Universal band saw KBS 620 DG, year of construction: 2010 Working range min.: 10 x 10 mmWorking range max.: 620 x 350 mmCNC swivel range45 double-sided, max. 470 40 x 350 mm30 one-sided, max. 330 x 350 mm Drilling machine KDE 603, year of construction: 2008 (3-Axis-Drilling Machine) Working range min.: 50 x 5 mmWorking range max.: 650 x 325 mmDrill diameter: 6 - 31.75 mmHard marking unit + cooling sprayer Infeed roller conveyor with measuring system M 120 PP until max. 12.1 m Outfeed roller conveyor for max. good parts length 12 m

Basic infrastructure: Economy lubrication add. to coolant atomizer systemMultiple cuts on the front side Unit for the material removal ABG: Offcut gripperDistributing system ABG up to 2, 000 mmProtection device

Contour marking is executed via a carbide milling tool. The carbide leaf within the tool is brought to rotation by air supply, so the required markings can be milled.BENEFITS AT A GLANCE Markings are possible on horizontal as well as on vertical surfaces. Marking of figures, characters and lines in different sizes enable a high variability of markings Markings are still visible after shotblasting

Diverse manufacturing technologies such as drilling, milling, counter sinking, thread-cutting, countersinking, thread-cutting, contourmarking, oxyfuel and plasma cutting bundled on a single machinePowerful drives for optimum performance and low production timesHigher spindle speeds ideal for millingDownholder roll for optimum plate contact pressure during milling14-place tool changer for faster setup timesLess space needed for measuring carriageMeasuring carriage at the side runs through the machine to optimise plate fixation throughout the entire machining processIncreased traversing speed of axesTwo processing units for parallel machining and higher efficiencyDurable construction provides the basis for a long-term investmentCommon cut for less wasteFully automatic handling of small partsRotating swarf brush for automatic clearing of chips in front of cutting processesHeavy duty machine capable for incorporating one drillingflame-cutting unitUse of HSS, carbide and solid carbide drillsFlexible contour marking systemGrid- or common cut to minimize scrapAutogenous and plasma cutting methods

Robust, low-vibration twin-column construction for perfect cutting resultsLong blade life and the best cutting quality due to an inclined saw bandHigh cutting performance due to a powerful drive motorPrecise NC-controlled cutting-angle settingPowerful clamping system reliably holds material and reduces vibrations to prolong band life and best cutting resultsIntelligent material measurement integrated into clamping system for greater process reliabilityRapidworking feed concept for shorter idle timesSwarf brush to improve cutting performance and reduce impurities in the machineCut monitoring system incl. cutting pressure and slippage control for optimum cutting qualityLaser-assisted cutting edge visualisation for manual cuts

Robust, low-vibration design for optimum production qualityConsistently high quality, even with complex cutting processesAutomatic calibrationFully enclosed to ensure high operational safetyPartial programming possibility via NC-DSTV files, integrated drawing program or macrosSimple enter and fully automatic processing without programming skillsAutomatic generation of robot program from 3D data or DSTV filesMachining simulation and collision control for trouble-free operation3D images of workpiecesSuitable for plasma or oxy-fuel cuttingCoping of H, U and L sections in addition to rectangular tubing and flat materialTried and tested six-axis KUKA robot

Aperture size (w x h): 1600 700 mmLow paint consumption due to optimum spray gun conceptComplete painting in a single passMinimized material contact points with chain conveyorUse of water-soluble or solvent-based paintsLow cleaning and maintenance times

Shotblasting for Continuous Operations Capacity range [mm]: 1500 x 600 and Number of Turbines: 6Aperture size (w x h): 1.600 x 650 mm6 turbines (15-22 kW each)The solution for steel traders, steel fabricators and steelworks, as well as shipyards in shift operationTriple housing (steel manganese steel exchangeable manganese-steel internal lining)Maintenance and user friendly

Band Saw with Mitre Unit for light to medium Steel Construction and Trading Capacity Range 90 [mm]: 400 x 350, Robust, low-vibration twin-column construction for perfect cutting resultsLong blade life and the best cutting quality due to an inclined saw bandHigh cutting performance due to a powerful drive motorPrecise NC-controlled cutting-angle settingPowerful clamping system reliably holds material and reduces vibrations to prolong band life and best cutting resultsIntelligent material measurement integrated into clamping system for greater process reliabilityRapidworking feed concept for shorter idle timesSwarf brush to improve cutting performance and reduce impurities in the machineCut monitoring system incl. cutting pressure and slippage control for optimum cutting qualityLaser-assisted cutting edge visualisation for manual cuts

Manual Mitre Saw for Non-Ferrous Metals Up to 75 mmBENEFITS AT A GLANCE saw blade: 250 mmSuitable for single cuts and processing small batchesWork safely at workbench or work tableTransportable for use in workshops or on-site use

Capacity Range (w x h): 600 500 mmRobust, low-vibration design prolongs machine and tool lifeMachine portal in robust welded construction incorporating two horizontal and one vertical drilling unitEfficient drilling, contour-marking, centre-marking, counter-sinking and thread-cutting on all three drill axes simultaneouslyPowerful clamping system reliably holds material and reduces vibrations to prolong band lifeIntelligent material measurement integrated into clamping system for greater process reliabilityRapidworking feed concept for shorter idle timesServomotor and ball screw for high-precision drill axis positioning and feed controlA saw can be incorporated to create a saw-drill combinationManual quick-change chuck and tool calibratorTool-centric processing minimises tool changesUse of HSS drillsThree drill axes each with one drilling tool

Powerful Punching-Shearing Machine for Angle Steel up to [mm] 160 x 160 x 19High punching and shearing forceRobust, low-maintenance design for long-term investmentAutomatic die clearance setting for optimum shearing resultsQuick-change tooling system to minimise idle timesMaterial transportation speed of 100 mmin for low transportation timesSorting system for good partsTriple marking unit marks up to 3 characters a secondThe design is influenced by years of experience in punching and shearingSturdy construction for low vibration and thus improved punching and shearing resultsCompact machine design for space-saving installationFast service support through help desk via remote support

Plasma Marking (Plasma Markieren)Input of marking data via DSTV interface. The plasma torch burns the markings in the steel.

For the electronic adjustment of the measuring length via NC-control.The feed gripper is clamped automatically after the positioning.Easy operation via touch screen.

Shotblast System Operating Efficiency and with Optimum Cleaning Effect Capacity range [mm]: 1500 x 600 and Number of Turbines: 4, Aperture size (w x h): 1.600 650 mmFour turbines (11 kW each)Suitable for a throughput from 10, 000 to 20, 000 tons per yearTriple housing (steel manganese steel exchangeable manganese-steel internal lining)Maintenance and user friendly

The printer prints the appropriate lable after the part is cut. After the end of sawing process, the operator sticks the lable manually on the workpiece.Offers the possibility to fix barcodes, order information and further information onto the workpieceLables can be sticked on each surfaceNot prone to breakdowns as it is placed outside the machine

Input of marking data via software, DSTV interface or manually by the operator. The hard marking unit marks up to 22 characters without material movement hydraulically in the workpiece.Marking of figures (0-9), characters (A-Z, but without J, Q and O) and punctuation marks (dot, slash and hyphen) in given character height of 10 mmhard stamping is relatively fastMarkings are still visible after shotblasting

Trouble-free and fast printing of characters and figures onto the workpieceMarking method is very fast, because printing is fixed during process flow and a manual intervention is not necessary