LABGULF FZC sharjah

Setastill Distillation   Part Number 11860-3   The distillation unit, mounted to the left, comprises a flask support mechanism, heater elements, and the heater controller. The flask is supported by a drop-in ceramic-glass support board mounted to a platform that is adjustable for height.   FEATURES   Ambient to 400°C distillation range Adjustable height heater/flask platform Toughened glass window Cooling fan   ADDITIONAL INFORMATION   The quartz enclosed heating elements are also attached to the platform, and are powered by a solid-state energy regulator and calibrated control. A cooling fan is installed in the rear of the distillation unit to reduce cooling time between distillations. A toughened glass observation window is fitted in the front of the distillation window, and a spillage collection tray with outlet is mounted beneath the heaters.   The condenser unit is attached to the distillation unit, and may be used with either a static fill of coolant or a laboratory cooling supply. Housed within the condenser unit is a thermally-insulated, stainless steel coolant tank, fitted with a permanently installed condenser tube. A drain tap and an overflow outlet are mounted on the rear of the unit.   Supplied with: mains lead and instruction manual.   SPECIFICATIONS   Distillation Range Ambient to 400°C Voltage Range 110/120V or 220/240V, 50/60Hz (switchable) Power 1000W maximum Condenser Tank Volume 7.2 litre Size (HxWxD) 47 x 37 x 25cm (Condenser) 47 x 21 x 21cm (Draught Screen) Weight 12 kg total CCCN Code: Tariff 90318080

The Seta Salt-in-Crude Analyser is a robust and portable instrument for determining the chloride (salt) content of crude oils in full conformity to ASTM D3230, IP 265 and equivalent test methods. The Seta Salt-in-Crude Analyser is pre-calibrated and automatically displays salt concentration measurements in g/m3 or lbs/1000bbl (pounds per thousand barrels), this avoids the need to mix salt calibration standards and makes testing a simple and fast procedure.   FEATURES Pre calibrated for immediate use to ASTM D3230 Salt concentration values displayed automatically No need for mixing of salt standards Typical test time of less than 30 seconds Moisture proof membrane touch screen with large keys Calibration modes allow verification using user standards RS232 - PC compatible Fully portable, all items contained in aluminium carry case Supplied with beaker and sensor support stands Optional bench top stand (see photo) Interchangeable plug-in sensor Battery or mains power supply

High-performance modular DTA & DSC thermal analyzers (ambient / 2400°C) The HIGHLIGHTS SETSYS Evolution is the standard for high-performance TGA, TG-DSC and TG-DTA application.  It is based on a complete modular thermal analysis platform for – TGA,  DTA, and DSC – Simultaneous TGA/DTA and TGA/DSC – Dilatometry / TMA The key to the SETSYS TGA-DTA / DSC is Setaram’s unique symmetrical balance, a highly robust and flexible furnace conï¬?duration offering unique performance and the lowest operational costs of any system available.  The SETSYS can be conï¬?figured to operate up to 2400°C and also use controlled humidity, vacuum, and highly aggressive atmospheres.   http://www.setaram.com/setaram-products/thermal-analysis/differential-scanning-calorimetry-dsc-differential-thermal-analysis-dta/setsys-evolution-dtadsc

D155 Density/Specific Gravity Meter The automated CANNON D155 offers a low-cost, affordable alternative to manual hydrometer methods for measuring density and specific gravity with easy, one button operation. The built-in thermal control provides quick, precise measurement with 4 decimal resolution.   COMMON APPLICATIONS Petrochemical (solvents, fuels, fuel oils, lubricants, crude oil) Chemicals Pharmaceuticals Cosmetics Food and beverages

Part Number 90000-3 This purpose-made Oil Test Centrifuge is fully programmable allowing automatic configuration to the specified oil test parameters. A four place swing out rotor and universal bucket assembly accommodates low cost adaptors and cushions suitable for borosilicate glass centrifuge tubes of the types specified for oil testing: 6 or 8 inch conical, 8 inch trace sediment, 8 inch pear-shaped or 12.5ml. To reduce errors in measurement of tube content, the rotor design allows tubes to stand in a near upright (vertical) position at rest. FEATURES Conforms to safety requirements IEC 1010-1; 1010-2-D 4 place swing out rotor Static, near vertical bucket positioning Specifically designed for testing oils Heated chamber, ambient to 80°C Membrane ‘touch’ control panel Pre-heat facility to ensure bowl is at test temperature prior to test Universal buckets for 12.5ml, 6 and 8 inch glassware Optional ‘Setafuge’ Hazard Reduction System Microprocessor control with 99 memories Optional trolley

Processor controlled combined crude oil distillation system for fully automatic operation according to ASTM D-2892 (TBP) and ASTM D-5236 (Potstill). PETRODIST 400 CC is a combination of the following systems: PETRODIST 100 CC (ASTM D-2892) PETRODIST 200 CC (ASTM D-5236) Both systems can operate at the same time (simultaneously) in fully automatic, uninterrupted and unattended mode.  The data evaluation software provides also a combined TBP-curve for both systems. Compact design with control system and safety items for unattended operation. No operator intervention and no intermediate stops are required. All necessary accessories will be supplied together with the system. The installation requires water, nitrogen, compressed air and electricity. The system enables to perform TBP- and Potstill – distillations of various crude samples according to ASTM-standards and is designed for laboratory use. The system is equipped with a central computer control, vaccum supply and thermostate system, data storage and evaluation station as well as a fraction collector, designed to serve for both distillation systems simultaneously and provides direct automatic distillation flow rate control. The fraction/receiver changes are automatically performed according to preselected cut temperatures or in case of receiver overfilling. Both systems are equipped with individual fraction collectors to allow simultaneous operation of both systems. The final data and the TBP-curve in wt% and vol% are printed out after reweighing the residue. The unit requires water, nitrogen, compressed air and electricity. Dry ice or liquid nitrogen is required for cold traps.