Our Products #2745122

The Pro-Wedge 3XL Wedge Welder, designed and manufactured in the USA by DEMTECH, is the new standard of the industry wedge welder for production field seaming of 60-120 mil (1.0-3.0mm) HDPE and LLDPE geomembranes. Drawing from many years of experience in the plastic welding industry, we've designed features and functions into its design to satisfy the needs of the most demanding welding technicians on the most demanding job sites. Here are just a few of the many exclusive features that make the PRO-Wedge XL the heavy duty welder of choice for thick andor textured PE materials:Model Number: 500-01003XLWeight (welder only) 60 lbs. (27.2 kilos)Shipping Weight 95 lbs. (43 kilos)Dimensions (welder only) 26"X17"X 17" (66 X 43 X 43 cm)Material Range HDPE, LLDPEWelding Range 40-120 mil (1.0-3.0mm)Operating Voltage 230 VAC, Single PhasePower Consumption 3000W, 13 AmpsPackaging Sturdy Steel Case wfoam insertPro-Wedge 3XLSuper Heavy Duty Wedge WelderBy far the fastest welder due to longer wedge w3000 Watts of heating power.Welding speed is only limited by technicians ability to keep up with cleaning, trimming, etc.Most common replacement parts are interchangeable with a Wedge-it series 2000 welder.Wedge assembly can be removed in 30 seconds! Minimizes down time.External Plug-in connector for heaters and thermocouple.Spring loaded retaining disc protects heaterT.C. wires from wear.Hinged control panel for instant access to electrical components.Automatic safety switch shuts off power to control box when cover is opened.Many other time and money saving features. Too many to listd

he PRO-Wedge XL, Model 500-0100XL Wedge Welder, manufactured by DEMTECH Services, Inc., is the new standard of the industry wedge welder for production welding HDPE geomembrane seams. Drawing from many years of experience in the plastic welding industry, we've designed features and functions into its design to satisfy the needs of the most demanding welding technicians on the most demanding job sites. Here are just a few of the many exclusive features that make the PRO-Wedge XL the heavy duty welder of choice for thick andor textured PE materials: Technical Specifications: Model Number: 500-0100XLWeight (welder only) 52 lbs. (23.5 kilos)Shipping Weight 66 lbs. (30 kilos)Dimensions (welder only) 16"X11"X 12" (40.6 X 28 X 30 cm)Material Range HDPE, LLDPEWelding Range 40-120 mil (1.0-3.0mm)Operating Voltage 110-250 VAC (Auto Switching)Power Consumption 1400W, 6-13 AmpsPackaging Sturdy molded case wfoam insertAll common replacement parts are interchangeable with a Wedge-it series 2000 welder.Wedge assembly can be removed in 30 seconds! Minimizes down-time.External Plug-in connector for heaters and thermocouple.Spring loaded retaining disc protects heaterT.C. wires from wear.Hinged control panel for instant access to electrical components.Automatic safety switch shuts off power to control box when cover is opened.Auto-switching voltage selection relay for 110220V operation.Many other time and money saving features. Too many to list

The PRO-X Model 600-0100 High Output Extrusion Welder, manufactured by DEMTECH Services, Inc., is the standard of the industry extrusion welder for production welding of thermoplastic liners, pipe, rigid sheet stock, as well as many other plastic welding applications. Drawing from many years of experience in the plastic welding industry, weve designed features and functions into its design to satisfy the needs of the most demanding welding technicians. Powerful drive motor with bullet Proof gearbox and custom built armature and windings with extended warranty.Exclusive high precision gears (interchangeable with existing units) for super quiet operation and increased drive motor life. GUARANTEED!Large control box makes it easy to diagnose and repair electronic components.Control box cover hoods controls and switches protecting them from direct sunlight and accidental contact.Separate measurement and control of pre-heat and barrel temperatures with electronic cold start protection.Reliable Grand L pre-heat air unit maintains accurate temperature and high air flow.Ergonomic soft grip mid handle adjusts easily to different positions for right handed or left handed operation.Handle doubles as a stand, making it nearly impossible to tip welder over, preventing pre-heat air from burning a hole in the liner material.Hardened screw and barrel promotes high flow rates with minimal load on the drive motor.Non-Twisting rod feed design makes it easier to manage welding rod. Works with 4 or 5MM rod.Custom 1200W barrel heater maintains tight temperature control.Teflon welding shoes are available in Demtechs pre-machined design or blanks.

Lifetime calibration on microprocessor , GUARANTEEDSimple to operate. To sets of grips, two preset grip return position, fast jog switch, auto stopretrunVersatile. Unique gripe design for standard 1 inch bones and 4 inch grab tenstile.Accurate. Independent load cells. Test result for both coupons shown on backlit LCD display.Cost effective. Cuts pre-weld and destructive sample testing time in half !

The Milano Italian design meets eco-friendly. This Envyrozone unit offers clean lines and a smaller profile that is perfect for interior deployment in sophisticated office and retails settings.

The Algonquin is Envyrozone's workhorse container, ideal for deployment in high traffic areas and harsh outdoor setting such as parks and recreational facilities. It is durable and economical and its modular configuration allows for easy conversion into a multi-stream recycling unit or a single stream waste container. The powder coated steel construction ensures long life and minimal maintenance. The Algonquin is designed with a lid that keeps trash in place under high winds and deters animals and urban refuse rooters from accessing the basket. There is space available on all four sides to place a logo or message.

The Gobby is more than just a fun multi-stream container. It is also a recycling education program specifically designed to instill a recycling habit in children by teaching them how to separate recyclables from trash in a fun and colorful way. Youngsters love to "feed" Gobby, making it an ideal choice for deployment in a child friendly setting. The Gobby has unique panels that offer space for advertising, logos or messaging. Envyrozone can also create a Gobby to meet the specific needs of your environment.

The Firenze series of public outdoor furniture combines the strength of steel with the beauty of wood. The stainless steel shell is surrounded with an eco-friendly wood slat exterior. It is available in cedar, maple or recycled plastic lumber.

The Milan is a stylish and durable bench for outdoor use that stands up to even the harshest climate. It comes in brushed stainless steel or a powder coat finish.