2K Acrylic Wood Paint is based on non-yellowing acrylic polyol resins and saturated isocyanates. It is a weather resistant, high gloss solvent based acrylic clear. We are counted among the top companies, which are engaged in manufacturing and supplying 2K Acrylic Wood Paint from United Arab Emirates. Due to our vast distributed network, it has been an easy job for us to deliver retail as well as bulk orders for 2K Acrylic Wood Paint within the stipulated time frame.
Major Uses : Recommended for outdoor furniture, steel, external doors and frames, and automotive refinishes.
Application Procedure : The mixture ready for use, can be applied by brush, by roller or spray. Surface to be painted must be free of dirt and other contaminants. In the remaking of old woods. It is imperative to remove traces of wax, dirt and other oily matter to ensure a perfect adhesion of paints.
For repainting of steel surfaces, all damaged primers and contamination should be removed and thoroughly cleaned, prior to final painting.
Storage : Keep away from heat and fire. Store in the dark, cool and dry places. Shelf life up to 12 months in close container.
Packaging : Available in 1 Usg. 20 lit pail, 200 lit Drums
Physiological Hazards :
Acrylic 2k do not contain dangerous solvents, nevertheless, good ventilation in working rooms is recommended as well as the use of safety tools and equipment Acrylic 2k is flammable and harmful if swallowed. If contact with eyes occurs, cleanse with fresh water and seek immediate medical advise.
The above information is given to the best of our knowledge based on laboratory test and practical experience. However, as the paint is often used under condition beyond our control, we cannot guarantee anything but the quality of the paint itself. We reserve the right to change the given data without prior notice.
|Appearance||Clear Transparent Liquid|
|Specific Gravity (20oC)||0.970 + / - 0 .1|
|Acid value||3.2 – 7.0|
|Pencil Hardeness||2H – 3H|
|Heat Resistance||100 – 120oC|
|Viscosity (250C,FC # 4)||45 Sec|
|Non – Volatile (Wt.%)||
Base : 50 +/ - 0.5
Hardener : 41 + / - 0.5
|Gloss (60oC)||Glossy ( 90 – 100)|
|Application Condition||Brush, Spray or Roller|
|Catalyst||Catalyst # 042|
|Mixing / Dilution Ratio (Wt. %)||Base:Hardener:Thinner =100:50 25 ~ 30 (FC # 4 13 ~ 15 Sec)|
|Pot Life (20oC)||5 ~ 6 hours|
|Drying Time (20oC)||
Dust Free - 20 – 25 min
to Touch - 30 – 45 min
to Recoat - 2 – 3 hrs
Hard - 24 – 36 hrs.
|Coating Rate||12~ 14 m2/ lit. (80 – 120 gms / m2 )|
|Recoating||One coat may be sufficient for ordinary finish however one additional coat can be applied wet on wet if necessary. Light sanding with 400 ~ 600 mesh sand paper is recommended before subsequent coat when recoating time exceeds 3 hrs. and remove traces of wax|
|Recommended Under Coat||Acrylic Primer Sealer|
|Acrylic Primer Sealer||- 1 Coat|
|ACRYLIC 2K||- 2 Coat|
|Acrylic Primer||- 1 Coat|
|Acrylic B/C White / Colour||- 1 Coat|
|ACRYLIC 2K||- 1 Coat|
Note: ACRYLIC 2K can be applied over NC base coats also
Abdullah Al Atrash
Saja Industrial Area, Sharjah, - 23085, United Arab EmiratesView Mobile No.