Sharjah, United Arab Emirates
Our Products
Polybest Putty is based on unsaturated polyester resin pigment and selected fillers. It is used to fill cracks, joints and uneven surfaces of cars, furniture etc. We are one of the prominent Manufacturers and Suppliers of Polybest Putty from United Arab Emirates. We formulate Polybest Putty using quality approved material and the latest techniques at our well-equipped production house. We conduct stringent tests on Polybest Putty in order to ensure that only the defect-free range reaches the customers’ end. Method of Application : For cars : The surface must be free from oil, dirt and other contaminants. It must be well primed either with expoxy or polyurethane primer. Add 2% of catalyst, mix and scrape polyester putty evenly. Sand the applied putty by water – Proof sandpaper intermittently with water soaking for a better and smooth finish. For Furniture : The Surface must be primed by nitro, polyurethane and polyester primer. Apply Polyester putty on cracks, joints and uneven surfaces. Sand with sandpaper and continue the rest procedure. Storage : Polybest Putty Filler should be kept in cool place below 25 o C. Shelf life minimum 6 months in a tightly closed container. Cleaning of Tools : All Tools should be cleaned with wash thinner or P.E. Thinner # 125 as soon as possible. Packing : Available in 1 Lit & 4 Lit. (usg.) Physiological Hazards : Polybest Putty Filler does not contain dangerous solvents, nevertheless, good ventilation in working room is recommended as well as the use of safety tools and equipment be used. Polybest putty filler is flammable and harmful if swallowed. If contact with eyes or skin occurs, wash well with fresh water and seek immediate medical advise. The Above information is given to the best of our knowledge based on laboratory test and practical experience. However, as the paint is often used under condition beyond our control, we cannot guarantee anything but the quality of the paint itself. We reserve the right to change the given data without prior notice.
Colour | Grey, Beige |
---|---|
Specific Gravity | 1.3 Kg. / Lit. |
Flash Point | 22oC |
Shelf Life | 6 months in sealed container |
Hard | 1 - 2 min |
---|---|
Sandable | 5 – 10 min |
Mas Paints & Chemicals Ind