Post Buy Requirement
MG
Dubai, .., United Arab Emirates
Add Review

Our Product / Services

  1. Pumps, Pumping Machines & Parts 28 Products available
  2. Water Pumps 3 Products available
  3. Industrial Pump 4 Products available
  4. Others 64 Products / Services available

Other Products / Services

IMMERSION PUMPS MPS

  • Power 0.45 / 1.5
  • FLOW 1 / 7.2
  • HEAD 8 / 78.5
Close coupled multi-stage submersible pumps.
External jacket in stainless steel AISI 304 and stages Noryl.MPSM with built-in capacitor, accessible through the delivery casing.Hydraulics located below the motor with the motor cooled by the pumped fluid. Safe operation is possible with the motoronly partially submerged.Double shaft seal with oil chamber.The suction strainer prevents the entrance of solids with diameter bigger than 2 mm.
View Complete Details

IMMERSION PUMPS MXS

  • Power 0.55 / 3
  • FLOW 1 / 11
  • HEAD 12 / 105
Close coupled multi-stage submersible pumps.
All parts in contact with the fluid both internal and external are in chrome-nickle stainless steel.
MXSM with built-in capacitor, accessible through the delivery casing.
Hydraulics located below the motor with the motor cooled by the pumped fluid. Safe operation is possible with the motor only partially submerged.
Double shaft seal with oil chamber.
The suction strainer prevents the entrance of solids with diameter bigger than 2 mm.
View Complete Details

I-MAT Variable Speed System

Variable speed system driven by frequency converter for the motor control in the water supply applications and in the production distribution of hotcold water.I-MAT is an integrated control system which, applied to the motor, allows to manage a wide range of applications and operating modes.
View Complete Details

ARIAMAT

The automatic air feeder ARIAMAT controls the air cushion in the pressu- re vessel by replacing the air dissolved in the water at every pump start. This device limits the number of pump starts and stops, allows a better use of the water reserve and improves the overall performance of the automa- tic pressure system.ARIAMAT operation is explained in pictures 1-2-3-4.At the end of every cycle, ARIAMAT AR 300E, AR 1000E and AR 2000E let in the vessel 300, 1000 and 2000 cm3 of air respectively.For a good operation of ARIAMAT it is necessary to have enough suc- tion pressure in the pipe whilst the pumps are running.If the pumps work under positive suction head and water falls to the suction inlet, there will not be enough suction pressure in the suction pipe to allow a correct operation of ARIAMAT; in this case, it is neces- sary to create an artificial loss in the suction pipe, by closing gradual- ly the gate valve when the pump is running until the water level in the ARIAMAT starts dropping.When a sufficient suction pressure to grant a safe ARIAMAT operation cannot be achieved, it is recommended to feed the vessel with a com- pressed air system and level probes.
View Complete Details

FIRE-FIGHTING SETS

  • Power 0.45 / 55x3
  • FLOW 1.5 / 570
  • HEAD 10 / 95
Pressure boosting sets with 1 to 6 fixed speed pump.Sets with 4, 5 and 6 pumps on request.Depending on the reduction of the pressure in the system, the pressure switches determine the starting up of the pumpsin sequence and the microprocessor alternates the starts.
View Complete Details

IMMERSION PUMPS SFM

  • Power 1.4
  • FLOW 0.3 / 2.7
  • HEAD 1.2 / 70.6
Submersible borehole pumps for 4 deep wells (DN 100 mm), with turbine impeller.
The special plastic and stainless steel hydraulic materials prevent the impeller from locking even after long stationary periods.
Thanks to special construction features, both installation and maintenance of SFM 70 are fast and easy.
Delivery port G 1.
View Complete Details

Distribution Frames

We mostly offer versatile digital and optical fiber distribution frames with greater density customized to the needs of the customer.
View Complete Details

Ghee

Verka Ghee is a brand known in all the homes in India, and we have also marketed Awwal, its counterpart to best suit different market segments. These are a favorite of Indians, Pakistanis and other South Asian communities.
To reach our more international clientele, Metel introduces KKG Pure Ghee, from New Zealand, specially packaged in Malaysia, for MTL to best serve our customers.
View Complete Details

Asynchronous Three Phase Motors Shaft

  • Country of Origin India
  • Type Asynchronous Electric Motor
  • Weight 10-20kg, 50-60kg
  • Voltage 110V
  • Power 1-3kw

Asynchronous three phase motors shaft height 56 to 315 (standards motors to IEC DIN)- Protection IP 55 and higher. Asynchronous three phase pole changing motors (constant moment and for fan drives). Explosion protected motors EEx e (certified by the German PTB) and Ex n (certified by the Spanish LOM). Brake motors. Asynchronous single phase motors frame size 56 to 100 Energy saving motors (with high and improved efficiency eff1 and eff2. Converter fed asynchronous motors. Marine motors according to the most important international classification societies. Aluminum housing up to frame size 180 (end shield cast iron from frame size 132)

View Complete Details

Booster Water Pump

Booster pumps sets with 2 or more pumps in parallel, designed and built to meet the most common requirements in terms of water pressure maintenance in residential, commercial, industrial and agricultural installations in a reliable manner. Booster pumps can be designed to function duty, stand-by or assist mode. The sets are available with PRESSURE vessels fitted to the discharge manifold .Control panels for the booster pumps will be designed as per customer requirements.
CAST IRON CONSTRUCTION PUMPS WITH GALVANISED IRONS.SCU MANIFOLDS
STAINLESS STEEL CONTRUCTION PUMPS WITH GALVANISED IRONS.SCU MANIFOLDS
View Complete Details

Control Panel

VFD Control panels can be designed as per the customer water requirements.VARIABLE FREQUENCY CONTROL PANEL FOR PUMPS
View Complete Details

Diesel Generator

Diesel generator sets with Daewoo engines Perkins Cummins and Marelli Mecc Alte ABB LEROY SOMMER STAMFORD alternators.
View Complete Details

Headsets

We are the authorized distributors for the full range of corded, wireless and Bluetooth headsets.HEADSETS
View Complete Details

Structured Cabling

We have a ready stock of structured cabling products such as copper cables, copper accessories, fibre cables, fibre accessories, metal cabinets and coaxial cables. We have the ability to provide quality, competitive prices and customer service in the structured wiring industry.
View Complete Details

Connectors

Our connectors are extensively used in 75ohm communication systems and have become a recognized standard in UAE today. With Quick Termination technology our connectors reduce assembly time and loose parts and make termination simple.
View Complete Details

Pickles

Complete range of Pickles in Mango, Chilly, Lemon and Mixed Flavors also with our Sohna Brand from Punjab, India.
View Complete Details

MILK POWDER

From New Zealand, packaged in Malaysia, MILKO Skimmed Milk Powder & Whole Milk Powder are of the best quality of Milk, packaged in tins and pouches for the convenience of our customers.
View Complete Details

Canned Food

Our Italian brand, bringing in a touch of Europe in the Middle East, Clada Chick Peas & Red Kidney Beans are for those who believe in a healthy lifestyle.
View Complete Details

IMMERSION PUMPS CS

  • Size 4”, 6”, 8” and 10"
The Calpeda 4, 6, 8 and 10" submersible motors are built using advanced technology and components of superior quality that they ensure goodn mechanical strength and excellent electrical reliability. The good performances are guaranteed thanks to strict tests of all the different components during the various production phases.
View Complete Details

Blue Pumps

  • Color blue
The blue Series is intended mainly for domestic and residential installations and provides compact size and outstanding reliability. Versions are available with two different hydraulics:

DRENO (DR blue) with multi-channel open impeller for clear or slightly soiled wastewaters.

DRAGA (DG blue), with vortex impeller and large free passage for pumping wastewaters with heavy soil, for use with blueBOX lifting stations

Meticulous design and the use of high-grade materials allow easy maintenance and make the replacement of parts subject to wear simple and less frequent than on other models in the same price band.
Every model undergoes pressurised testing to guarantee perfect assembly and operation of the gaskets, cable gland and mechanical seals.
View Complete Details

Submersible Pumps

  • Size 40 mm.
High-performance, compact stainless steel submersible pumps for optimal service in household installations and small civil plants. Two different types of hydraulics are available for the maximum flexibility:DRENO (DR steel) with multi-channel open impeller for applications with clear or slightly soiled wastewaters
DRAGA (DG steel) impeller for applications with heavily soiled wastewaters and solid bodies, thanks to the free passage of up to 40 mm.
The cooling system allows these pumps to be used even when only partially submerged and in particular the DR steel version is easily converted into a dry floor pump, with suction levels as little as 5 mm above the ground.
Every model undergoes pressurised testing to guarantee perfect assembly and operation of the gaskets, cable gland and mechanical seals.
View Complete Details

IMMERSION PUMPS SDX

  • Power 2.2 / 110
  • FLOW 6 / 120
  • HEAD 8.2 / 700
Submersible borehole pumps for 6 wells (DN 150 mm) and 8 (DN 200 mm).
6, 8SDX: with external jacket and stages in stainless steel AISI 304.
6, 8SDXL: with external jacket and stages in stainless steel AISI 316.
Impellers
Radial impellers: 6SDX(L) 13-18-27.
Mixed flow impellers: 6SDX(L) 30-46-65, 8SDX(L) 78-97.
Connection: Screwed connection ISO 228
Delivery casing with built-in non-return valve.
View Complete Details

IMMERSION PUMPS SD

  • Power 0.37 / 10
  • FLOW 0.15 / 21
  • HEAD 6.6 / 305
Submersible borehole pumps for 4 wells (DN 100 mm), and 6 (DN 150 mm), with external jacket in stainless steel AISI 304 and stages in polycarbonate for 4SD pumps and in noryl for 4SDF, 6SD, 6SDN pumps.
Impellers:
radial floating impellers: 4SDF 16, 22, 36, 46, 54
radial impellers: 4SD 31, 6SDN 12, 16, 21
mixed flow impellers: 4SD 10, 15 6SD 18, 19, 20
Connection: screwed connection ISO 228.
Delivery casing with built-in non-return valve.
View Complete Details

MULTI-STAGE PUMPS MXP

  • Power 0.33 / 0.75
  • FLOW 1 / 7.2
  • HEAD 5 / 40
Horizontal multi-stage close coupled pump.
Single-piece barrel casing in chrome-nickel stainless steel, with front suction port above pumps axis and radial delivery at top.
Stages in Noryl.
- For water supply.
- For domestic use, for garden use and irrigation.
View Complete Details

SELF-PRIMING PUMPS MXA

  • Power 0.45 / 1.1
  • FLOW 1 / 8
  • HEAD 14 / 51
Horizontal multi-stage, self-priming, close coupled pump.
Single-piece barrel casing in chrome-nickel stainless steel, with front suction port above pumps axis and radial delivery at top.
Stages in Noryl.For water supply.
- For domestic use, for garden use and irrigation.
View Complete Details

SELF-PRIMING PUMPS NG

  • Power 0.55 / 22
  • FLOW 0.25 / 9.5
  • HEAD 15.5 / 74.5
Close-coupled self-priming shallow well jet pumps with built-in ejector.
NG: version with pump casing and lanter bracket in cast iron.
B-NG: version with pump casing and lanter bracket in bronze (the pumps are supplied fully painted).
View Complete Details

WHIRPOOL PUMPS NMP

  • Power 0.55 / 11
  • FLOW 6.6 / 108
  • HEAD 3 / 37.5
Close-coupled self-priming centrifugal pumps with built-in strainer.
Inner basket with 3 mm holes.
NMP: version with pump casing and lanter bracket in cast iron.
B-NMP: version with pump casing and lanter bracket in bronze (the pumps are supplied fully painted).For water circulation in swimming pool filtration systems.
- For clean or slightly dirty water with solids in suspension.
View Complete Details

WHIRPOOL PUMPS

  • Power 0.45 / 1.1
  • FLOW 3 / 18
  • HEAD 4.7 / 16.5
Self-draining, single-impeller pumps, with motor insulated from pumped water, constructed with high quality, corrosionproof plastic materials, with stainless steel diffuser.
Compact design (158 mm wide).
PVC pipe connections:
Ports for cementing joint, with external thread for union coupling. For spas, hydromassage bathtubs and whirlpool baths.
View Complete Details

MULTI-STAGE PUMPS MGP

  • Power 0.33 / 0.75
  • FLOW 1 / 7.2
  • HEAD 5 / 40
Horizontal multi-stage close coupled pump.
Single-piece barrel casing in cast iron, with front suction port above pumps axis and radial delivery at top.
Stages in Noryl.For water supply.For domestic use, for garden use and irrigation.
View Complete Details

SELF-PRIMING PUMPS NGL

  • Power 0.45 / 1.5
  • FLOW 0.3 / 8.4
  • HEAD 18 / 55.5
Close-coupled self-priming shallow-well pump with built-in ejector. For drawing water out of a well.
- For lifting water containing air or other gases.
- For increasing water pressure from flooded suction applications.
- As pressure boosting pump for central water systems with low pressure (follow local specifications if increasing network pressure).
- For garden use.
- For washing with a jet of water.
View Complete Details

SELF-PRIMING PUMPS NGX

  • Power 0.45 / 1.5
  • FLOW 0.3 / 8.4
  • HEAD 18 / 55.5
Close-coupled self-priming shallow-well pump with built-in ejector.
A high-quality pump for domestic water supply. Designed with environmental considerations, featuring a stainless steel casing, brass alloy impeller with minimal use of plastic materials.For drawing water out of a well.
- For lifting water containing air or other gases.
- For increasing water pressure from flooded suction applications.
- As pressure boosting pump for central water systems with low pressure (follow local specifications if increasing network pressure).
- For garden use.
- For washing with a jet of water.
View Complete Details

WHIRPOOL PUMPS WHIRPOOL PUMPS

  • Power 0.55 / 11
  • FLOW 6.6 / 108
  • HEAD 3 / 37.5
Close-coupled self-priming centrifugal pumps with built-in strainer.
Inner basket with 3 mm holes.
NMP: version with pump casing and lanter bracket in cast iron.
B-NMP: version with pump casing and lanter bracket in bronze (the pumps are supplied fully painted). For water circulation in swimming pool filtration systems.
- For clean or slightly dirty water with solids in suspension.
View Complete Details

WHIRPOOL PUMPS MPC

  • Power 0.37 / 2.2
  • FLOW 3 / 40
  • HEAD 4.2 / 18
Self-priming swimming pool pumps with built-in strainer and motor insulated from pumped water.
The pump is made with high quality plastic materials, corrosion and sand erosion resistant.
With stainless steel diffuser.
Base-plate kit.For water circulation in swimming pool filtration systems.
- For clean or slightly dirty water with solids in suspension.
View Complete Details

IMMERSION PUMPS MP

  • Power 0.45 / 0.9
  • FLOW 1 / 8
  • HEAD 2 / 31.5
Multi-stage centrifugal submersible pumps in chrome-nickel stainless steel, with vertical delivery port.Motor cooled by the pumped water passing between the motor jacket and the external jacket.Double shaft seal with oil chamber.
View Complete Details

GEAR PUMPS T, TP

  • Power 0.33 / 7.5
  • FLOW 0.06 / 6
  • HEAD 5 / 165
Close-coupled peripheral pumps (regenerative pumps) with turbine impeller.
T, TP: version with pump casing and lanter bracket in cast iron.
B-T, B-TP: version with pump casing and lanter bracket in bronze (the pumps are supplied fully painted).
View Complete Details

TWIN IMPELLER CENTRIFUGAL PUMPS NMS

  • Power 0.25 / 75
  • FLOW 1 / 480
  • HEAD 3 / 95
Close-coupled centrifugal pumps; electric motor with extended shaft directly connected to the pump up to 15 kW, new bracket construction for standard motors (Stub-shaft construction) from 18, 5 to 75 kW with integrated thrust bearing.
Pump casing with axial suction and radial delivery on top, main dimensions and performance according to EN 733 with additional sizes for completion.
NM4: version with pump casing and lanter bracket in cast iron.
B-NM4: version with pump casing and lanter bracketcasing cover in bronze (the pumps are supplied fully painted).
Connections
View Complete Details

SEWAGE PUMPS GEOTRIT-GEOCLEAN-GEOCOMP

GEOCLEAN makes the addition of a domestic kitchen or utility room easy even when below or distant from a drain.
The system has a clapet valve and it cannot be used with waste waters.
GEOCLEAN is provided with flexible sleeves, elbow, metal hose clips, plugs.
GEOCOMP
Macerating pumping system. It is possible to install a complete bathroom in a basement conversion or loft extension.
The GEOCOMP macerating system is installed in a case specifically designed for horizontal outlet spigots.
Installed and used correctly, this unit will give consistent and reliable service.
The system has a grinder pump, clapet valve and carbon filter.
GEOCOMP is provided with flexible sleeves, elbow, metal hose clips.
GEOCLEAN
Lifting station for clean water.
GEOCLEAN makes the addition of a domestic kitchen or utility room easy even when below or distant from a drain.
The system has a clapet valve and it cannot be used with waste waters.
GEOCLEAN is provided with flexible sleeves, elbow, metal hose clips, plugs.
View Complete Details

CONTROL PANEL IDROMAT Regulation Device

Regulation device for pump control equipped with flow and pressure sensor connected to an electronic system.
Inlet and delivery connection ports of the same diameter (G1).
Built-in check valve.
Pressure gauge 0-10 bar supplied as standard for all the models.
Automatic reset function in IDROMAT4 for the reset of the system without manual operation.
View Complete Details

FIRE-FIGHTING SETS AUE

  • Power 2.2 / 110x2
  • FLOW FLOW
  • HEAD 20 / 110
Units constructed in accordance with UNI-EN 12845 standards for automatic fire-fighting systems (with sprinkler) and according to UNI 10779 for fire-fighting systems with fire hydrants.The units may be composed of 1 or 2 main pumps.Units are fitted with a jockey pump, with which the system pressure level can be maintained without having to start the main pumps.
View Complete Details

IMMERSION PUMPS SDS

  • Power 5.5 / 185
  • FLOW 15 / 350
  • HEAD 5.5 / 470
Submersible borehole pumps for 6 wells (DN 150 mm), 8 (DN 200 mm) and 10 (DN 250 mm), with stages in cast iron or in bronze, on request.
Impellers: mixed flow impellers.
Connection:
- screwed connection ISO 228 for 6SDS;
- flange with counter-flange for welding for 8SDS and 10SDS.
Delivery casing with built-in non-return valve.
View Complete Details

WHIRPOOL PUMPS PF

Pre-filters with removable basket, constructed in stainless steel.
Loose ring flange connections.
Clamp type closing with lever and double adjustment clamp.
Inner basket with 6 mm holes.For water circulation pump in filtration plants in swimming pools.
- To prevent foreign bodies from entering the pump and the plant.
View Complete Details

Pressure Switches

  • temperature: 55°C-
Pressure switches for use with water in autoclave systems- The switch ensures automatically the starting and stopping of the elec-tric pump according to the set pressure values- Electric contacts: normally closed and made of brass alloy with Ag-Nisurfacing- Terminals with M4 screws and 88 mm pressure dice- NBR rubber membrane with textile insert (food grade for PMAT 5M-10, PMAT 5MT-16, PMAT 5.5MT-16)- 14"F hydraulic connection made of galvanized steel- Standard protection degree IP 44- Max ambient temperature: 55C- Tear resistant cable clamps
View Complete Details

SMAT Electronic Device

Electronic device for pumps protection, the device stops the pump in case of dry running and motor overcurrent.
Electrical connection- To pump motor cable (Schuko plug built-in)
- To electric line socket (Schuko plug built-in)
View Complete Details

TWIN IMPELLER CENTRIFUGAL PUMPS C

  • Power 0.15 / 1.1
  • FLOW 0.6 / 15
  • HEAD 3.6 / 22.4
Close-coupled centrifugal pumps with open impeller.
Free-flow impeller (vortex or recessed impeller) for type C 161E.
C: version with pump casing and lanter bracket in cast iron.
B-C: version with pump casing and lanter bracket in bronze (the pumps are supplied fully painted)
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Santhosh Nair (METEL Group of Companies)
  • Dubai, .., United Arab Emirates
  • Share us via