Post Buy Requirement
ME
United Arab Emirates
Add Review

Our Products

  1. Industrial Machinery 4 Products available
  2. Trolleys 3 Products available
  3. Cleaning Machines & Equipments 3 Products available
  4. Hand Tool 5 Products available
  5. Others 82 Products available

Other Products / Services

Reciprocating Saw And File Kit

The KPT-1100 reciprocating saw and file kit is a versatile tool used extensively in the auto body industry for cutting and filing sheet metal. With a stroke rate of 5000/ per min blade life is greatly improved the kit come with two cutting blades and three files

View Complete Details

Air Compressor


  • Description


  • Direct driven with full cast iron cylinder

  • Large oil crankase for long life operation

  • Plastic shroud protects hot and rotating parts

  • Universal air outlet

  • 2 Pressure auges

  • Pressure regulator

  • Ergonomic rubber handle

  • Large wheels heightens portability

  • Double feet with rubber shock absorber

View Complete Details

Air Dryer TDRY

  • Weight 33Kg.
  • V/Hz/Ph 230/50/1
  • L/min 2500
  • M3/h 150
  • Pressure Max 16 Bar
  • BSP ¾ ??
  • ?P 0.14Bar

Description




  • The new TDRY range, thanks to the efficiently cooling module drop

  • Ensures high energy saving and low operational cost

  • The main advantages are low-pressure drop even with load variances and a constant pressure dew point with differing load conditions

  • Other models on request: from 600 up to 35.000 Lts/min

View Complete Details

Automatic Car Wash Machine

OKYANUS X1types of Automatic Car Wash Machine is one of the best car wash systems which facilitates easy maintenance and safe operation. These swing (pneumatic vertical brush trolley movement swing on W350 types) system of OKYANUS machines are produced with different washing heights.

On our Rollover Type 3 Brush Okyanus X1 Model W states without dryer and WD states with dryer. There are 7 models that can wash Cars, Mini Busses and Midi Busses up to 240, 300 and 350 cm heights and Dry (WD) 240 and 290 cm heights. All the models except the 350 can wash the vehicles up to 220 cm width and W350 can wash up to a maximum width of 250cm.
Automated car wash briefly about technology

It contains Decorative polyester top panel cladding and water shields, which are standard. The vertical brushes moves on the swing system. On the W350 models the vertical brushes move on the pneumatically driven brush trolleys plus the swing system. Inverter driven gantry motors for speed control and automatically controlled top brushes to set pressure on the car are the other technological standards of our best sold model.

On the dryer type models (WD) the alternatives are vehicle profile following top dryer with 2 fan type blowers or fixed drying system with 3 fan type blowers.
W type models washes the vehicle 2-2, 5 min. with shampoo, WD type drying models washes, shampoos, waxes and dries the vehicle in 5-6 min.

OKYANUS yields best washing results for small cars as well as for vans and SUVs. The electronic safety systems on the top brush gives to apply a soft, controlled and a safe wash on the vehicles. The ease and low cost maintenance requirement, and best car wash technology of this machine is the reason for the high demand. It is possible to assemble all the optional accessories easily to the machine.

Automatic car wash machine price you can know on request, because projects vary due to sizes, presence of dryer, shampoo applying, coin-operation technology and much more which you can check in Optional Accessories tab. We would surely be glad to hear your requirements. As during 25 years of experience we never had two 100% identical project. To calculate automatic car wash machine price, please, use Ask for price tab above images. There you can provide us required characteristics for desired automated car wash. After we receive your inquiry, we will provide you up-to-date information and price.

What is inside this automated car wash machine:




  • Power controlled brushes Trolley mounted motor chain or pneumatic movement & swing system vertical brushes (for 335 and 350 type)

  • Textile water splash guards

  • Front and Back Steel cladding

  • Emergency stop button

  • Painted Steel Construction Cladding (Standard on Okyanus Type)

  • Venturi for chemical dosing

  • The machine is equipped with anti tilt locks against wind

  • A perfect washing operation on the rear, front and sides of the vehicles by the swing system function

  • Side brushes are designed in free swing system giving safety to facilitate cheap and ease of maintenance and use

  • Elevated connection supply cables over a post

  • The gantry speed can be controlled by the inverter system which works with the gantry driver motors. There for in drying operations higher efficiency is provided with low speed of gantry

  • OKYANUS can apply shampoo (both W and WD types) and drying agent wax (only WD types) to the vehicles
    Low voltage auxiliary circuits for safety

  • There is an electronic counter on the side pannel which counts the number of vehicles that have been washed

  • Bristles of the brushes, gear boxes, pneumatic and electronic components are the first quality products of major European manufacturers

  • The machines are controlled by PLC computer to run different types of washing programs

  • All external screws are stainless steel

  • The two fans are automatically positioned to dry first the roof and then the vehicles side (WD)

  • The metal structure made of first grade steel sheets and are hot dip galvanised, phosphate coated and baked after electrostatic powder painted

  • OKYANUS type of machines are products of high car wash technology like the other DBF machines


View Complete Details

Wheel Balancer

  • Motorized Yes
  • Wheel clamping Quick nut
  • Diametre of shaft 40 mm
  • Measuring speed < 200 rpm
  • Balancing accuracy 0.035 oz
  • Angular resolution ± 0, 35°
  • Lenght of shaft 8.85827 inch
  • Start/Stop balance time - Check spin 4.5 s
  • Rim diameter range 8" - 32"
  • Offset range 1" - 20"
  • Rim width range 1" - 20"
  • Max wheel diameter 42 inch
  • Max. wheel weight 154 lbs
  • Input power (VAC) 230 VAC 1ph 50/60 Hz

The wheel balancer for garages with small tyre service volume - combines high accuracy with small footprint

View Complete Details

Spray Booth

  • Power 4kw;
  • Power 5.5kw;
  • Inside Size 6900*3900*2700mm(L*W*H)
  • Outside Size 7000*5350*3400mm(L*W*H)
  • Main Door 3-folds, 2800x2500(mm) WxH
  • Personal Door 1 fold, 600x1800(mm) WxH
  • Blower capacity 24000m3/h;
  • Quantity 2sets
  • Blower capacity 21000m3/h;

































Wallboard
EPS (epispastics polystyrene) Colorful Steel Skin Boards, 50mm Thick, Tongue & Groove construction, Compound Construction, Aluminum-alloy Frame. Anti-flame and Heat-Insulation
Basement
Galvanized Steel Assemble, Height is 300 mm. Full grids. Two Embossed Steel Ramps: 1060x1750mm (WxL)
Light System
Ceiling lights: 8 units3pcs36w; Side lights: 8 units2pcs36w
Generator setting type
Side upper intake air, powder quadrate steel frame, coated steel.
Inlet Fan

Double-intake centrifugal fans

































Heating System
36pcs 1kw infrared light heating system
Purification System
Dual filtering structure, the primary filter can capture granules larger than 10m. Ceiling filter can capture granules bigger than 4m. Its filtering rate reaches 98%. Air pressure balance gauge, TSP1.2mg/m3
Controlling System
Lighting switch, spraying, risen-temperature spraying, baking, temperature controller, time setting, emergency stop, limited-temperature controller.
Total Power
48KW


View Complete Details

ALUMINIUM PROFILE PROCESSING CENTER


  • Designed for all kinds of drilling, grooving, notching, taping etc. on aluminum profiles

  • Uninterrupted machining property by means of the tandem mode to reduce the workpiece change time

  • B&R automation system enabling CNC movement on 3 axis

  • 8 tool magazine unit, 6 for cutter bits, 1 for aggregates and 1 for saw blade

  • Solid steel construction of the body and dynamic performance gantry

  • Special sound insulation cabinet around the machining center

  • PLC controlled spray tool cooling system with 3 pcs of outlets

  • 4 x automatic clamps used for grabbing the work piece

  • 2 x pneumatic rests used for resetting the work piece in X direction

  • 15 color touch screen

  • Fast programming using 7 preset macros

  • Program import via USB flash memory stick

  • Technical support via remote connection capability

  • Standard ISO G code programming language

  • Central lubrication system

  • Multi-language support

  • Operator safety barrier

  • LED lighting in the cabinet


  • OPTIONAL


  • Machine with 7 m of length

  • Automatic clamp positioning via Advance Alpha CAM software

  • Rapid programming with Standard Alpha CAM software

  • Tapping chuck (up to M10)

  • Automatic tool length measurement device

  • Barcode-Scanner

  • Chip removal conveyor belt

  • Additional clamps

  • Aggregate tools

  • Cutter tools, milling saw, tool holder and collets

  • Additional magazine unit with 6 tool capacity


By means of additional aggregate tool, various profiles can be machined with 4-axis movement. The machine can be used in tandem mode, a work method that allows machine stop times to be reduced to a minimum as it allows workpiece change time (loading/unloading) to be runwhile the machine is operating.


The machine has automatic clamp positioning feature and equipped with magazine unit holding 8 tool-units with the possibility of placing 2 aggregate tools and 1 milling saw to perform machining on the 5 sides of the pieces.







































16 kW
230/400V 3P-5060 Hz
12000 dev/dak. RPM
D=180 max.
6 Bar
7 lt.
W=1700 H= 5180 L=2340
max : 20 mm.
5000 X 1470 X 2000
2100 kg
1870 kg
View Complete Details

PVC WELDING AND CORNER CLEANING LINE


  • Providing 2 and 4 axis CNC controlled corner cleaning movement and the 4 corners of PVC profiles welding line .

  • Yilmaz cleaning machine custom profiles programming

  • Capable to operate manually and automatically,

  • Automate the recognition profile,

  • Automatic cleaning blade profile with 11 teams,

  • separate cleaning blades for colored and white profiles,

  • Profile wing width and height chassis control sensor,

  • Automatic bearing lubrication system, Windows-based touch-screen computer,

  • To be able to transfer programs via USB memory,

  • Technical support network with remote connection

  • movable control panel,

  • The speed can be changed during the process,

  • 220 frames / 8 hours (608 CNC)

  • 270 frames / 8 hours

  • The display of alarms and alerts can be seen,

  • Phase control system,

  • Low pressure control system,

  • Automatic profile flip robot can transfer the end of the 4 corners of the cleaning line feature

  • Automation system that allows movement in three axes (X, Y1, Y2),





















13.8 kW
400 V 3P- 5060 Hz.
9.000 RPM
6 Bar
X: 30 mm Y: 170 mm
View Complete Details

Cross Cut Saw Machine


  • Two-hand safety operation

  • Manual adjustment of intermediate tilting angles from 22.5 inwards and to 22.5 out wards

  • Pneumatically setting the saw blade to the 90angle by means of a selection

  • button without adjustment

  • Tilting pneumatically to the adjusted angle by pushing the button

  • Hydro-pneumatic saw feed

  • Adjustable saw blade feeding speed

  • Automatically closing safety guard

  • Ideal for large size of profiles and massive bars


STANDARD ACCESSORIES



  • Equipped with saw blade 550 mm

  • MKN 300 roller conveyor (3m)

  • 1 x vertical clamp

  • 2 x horizontal clamps

  • Spray saw blade lubrication system

  • Air gun


OPTIONAL ACCESSORIES



  • Additional saw blade 550 mm

View Complete Details

MANUAL PUNCH PRESS


  • Opens corner joint holes on the aluminum
    profiles

  • Opens corners up to 1.5 mm of thickness

  • Practical operations

  • Ergonomic design of the body

  • Special punch tool set hardened














21.5x 23.5x 34.5
6.2 kg.
5.75 kg.
View Complete Details

DIGITAL ROLLER CONVEYOR WITH AUTOMATIC STOP


  • Manual or automatic operation features

  • Windows based PLC controlled 15 touch
    screen monitor

  • Preparing cutting lists manually or via PC

  • Remote connection and problem solving
    feature

  • Easy program transfer with USB memory
    stick

  • Maximum +/- 0.1 mm of cutting accuracy

  • Making changes on the cutting lists by the
    screen

  • Conveyor length: 3000 mm

  • Useful width: 200 mm

  • Carrying capacity: 9 kg/m

  • Minimum cutting length: 5 mm

  • SKN 450 is available with the length of
    4.500 mm

  • SKN 600 is available with the length of
    6.000 mm


View Complete Details

Template Aluminium Copy Router Machine


  • Copy fitting operates manually and the figures on the template are machined at 1:1 ratio

  • The aluminium profiles up to 3 mm walls can be conveiently machined with a strong spindle motor.

  • The cutting fluid controlled with a joystick is sprayed to the milling spot.

  • Canals in varied lengths and widths can be opened without using the copy milling template

  • The water evacuation canal lenght on the copy template is adjustable

  • Copy milling motor is directly controlled via joystick

  • Referance stops the 2 axes of the milling machine

  • Inlet-outlet conveyor provided as standard

  • Ergonomic hand control unit

  • Front profile clamps are standard and top profile clamps are optional.


























1, 5 kW 2-4 lt/dak.
18.000 RPM
6-8 Bar
30-130 mm
1800 x 850 x 1600
160 kg

140 kg

View Complete Details

TEMPLATE COPY ROUTER MACHINE WITH TRIPLE HOLE & WATER SLOT DRILLING


  • Copy fitting operates manually and the
    figures on the template are machined at 1:1
    ratio

  • The aluminum profiles up to 3 mm of wall
    thickness can be machined with a strong
    spindle motor

  • The cutting fluid controlled with a joystick is
    sprayed to the milling spot

  • Slots in varied lengths and widths can be
    opened without using the copy milling
    template

  • The length of the water drain slot is
    adjustable on the template

  • Copy milling motor is directly controlled via
    joystick

  • Reference stops at 2 sides of the milling
    machine

  • Standard equipped with inlet-outlet
    conveyor

  • Ergonomic hand control unit

  • On the horizontal axis there is triple hole
    drilling mechanism

  • Pneumatically working water slot opening
    system


STANDARD ACCESSORIES



  • 5mmx L :80mm of router bit

  • Air gun

  • 2 x profile stops both left and right

  • Spray tool lubrication system

  • 2x horizontal clamps

  • 2x vertical clamps


OPTIONAL ACCESSORIES



  • Additional router bits

  • Special copy templates
































2200 W
6-8 Bar
8 Lt./dak. Lt./min.
X: 300mm Y: 120mm Z:130 mm
18000 D./dak. RPM
900 D/dak. RPM
64 x 80 x 149 cm
150
110
View Complete Details

SPINDLE COPY ROUTER MACHINE


  • Copy router with 1 vertical and 2 horizontal spindle motors ( 3 x 1.1 Kw 12.000RPM)

  • Designed to perform quickly and precisely locks holes on 3 sides of the aluminum profile without releasing the workpiece

  • Pneumatic 2 x horizontal and 2x vertical clamps

  • Horizontal and vertical pneumatic tracers with 3 diameters 5, 8, 10 mm

  • Horizontal & vertical templates with standard figures for Aluminum and PVC profiles.

  • Smooth movement, high precision and great sensitivity provided with gas spring and ergonomic handles

  • 1 m of roller support table at the right (with ruller) and left side

  • Manualy adjustable profile stops 5 placed on the right and left that allows

  • he work piece to be positioned properly in the machine.

  • Spray tool lubrication system


OPTIONAL



  • Additional router bits with 5mm, 8mm and 10mm

  • Additional collets with, 8 and 10

  • Special templates





























3, 3 Kw
6 BAR
7 lt./ min.
X1:X2 :650, 350 mm Y1:Y2 :180, 230 mm Z1:Z2 :170, 150
1200 Dev. 1X1, 1 Kw
970x 1300 1700 mm
380
370
View Complete Details

AUTOMATIC COPY ROUTER MACHINE


  • Opening locks, drilling handles, hinges,
    espagnolette holes etc. on PVC and
    aluminum profiles

  • Hydro-pneumatic Triple Hole Drilling
    Mechanism

  • Cast aluminum structure

  • Corrosion proof bearing shaft

  • Robust machine stand constructed from
    steel sheet

  • Equipped with tools for triple drilling
    mechanism (2x 10, 1x 13mm)

  • Equipped with 8 cutter tool


STANDARD ACCESSORIES



  • 8 router bit

  • 2x left and right profile stops

  • 2x horizontal clamps

  • Air gun


OPTIONAL ACCESSORIES



  • Spray tool lubrication system

  • Additional router bit

  • Special copy template

  • MA 240 centering apparatus

  • MKN 150 roller conveyor

































2x750W 400V 5060 Hz
6 Lt/dak.
68 Bar
x:270 y:110 z:130 mm
14000 D/min. RPM
9000 D/min RPM
W:64 L:80 H:149 cm.
147 kg.

105 kg.

View Complete Details

MANUAL END MILLING MACHINE


  • High quality end milling operations by
    means of the manual operation

  • Safety operations with safety guard

  • Practical cutter adjustment by means of
    the gap parts

  • Fixing the workpiece by means of the
    pneumatic vertical and horizontal clamps

  • Robust machine stand

  • End milling profile dim.
    ( HxW): 90 x 260 mm

  • Max. saw blade diameter: 170 mm


STANDARD ACCESSORIES



  • 1 x pneumatic vertical clamp

  • 1 x pneumatic horizontal clamp

  • Air gun


OPTIONAL ACCESSORIES



  • Milling cutter set

  • Spray tool lubrication system

  • MKN 100 roller conveyor
































800W/1200W 50/60Hz
230V AC P N PE 400VAC 3P PE
3000 D/dak RPM
D:161 d:30 mm
6/8 Bar
5 Lt/dak
W: 58 L: 46 H:110 cm
64 kg.

62 kg.

View Complete Details

SAW NOTCHING MACHINE


  • 1 x saw unit lower (vertical) with 550 mm dia. and 1 x saw unit upper
    (horizontal) with 500 dia.

  • Semiautomatic sawing unit with adjustable feeding speed and linear
    guides

  • Indication cutting angles of the saw blades and pivoting angles of the
    back fence (opt)

  • 3 x vertical and horizontal pneumatic clamps

  • Cast iron and steel construction of the body that is strong and lasting

  • Pneumatic guard with CE compatible locking switch

  • Two-hand safety module

  • Motor brake system for both saw blades

  • Both saw blades can be swiveled via a worm drive with a crank handle
    to mitre

  • Manual adjustment of profile resting mechanism with analog display
    on the hand wheel

  • Compensation for sawblade wear is easy to adjust

  • Interior LED lighting

  • Chip collection pan

  • Spray saw blade lubrication system


OPTIONAL



  • Laser indication for vertical and horizontal cutting line

  • Digital display unit showing the tilting and pivoting angles
    of both saw blades and table

  • Additional saw blades


























2 x 2.2 kW 1x 1.5 kW
6 kW 400V 3P-50/60Hz
6-8 BAR
2 lt./ min.
1500x 3200 1900 mm
1350
1250
View Complete Details

DOUBLE CORNER PVC WELDING MACHINE


  • Fully automatic two corner welding of PVC
    window profiles at an angle of 90

  • Possibility of precise welding of profiles
    between 30-180 on the left head

  • All parameters such as melting and
    welding time, welding pressure are set on
    the control panel independently

  • Continuous precision of welding quality
    by means of linear rails

  • Welding two corners of window frames or
    sash profiles are carried out in one cycle

  • User friendly with practical Teflon change
    feature by means of the roller system

  • Saving of time by means of most practical
    mold change system in the market

  • Capable of adjusting the clamp and
    weld ing pressure according to the profile
    type

  • Adjusting the heat between 0-300C via
    electronic thermostat

  • Practical setting of standard (2 mm) or
    seamless (0.2 mm for free of flashes)
    welding options

  • The movable right unit moves manually
    and left welding unit is fixed at 90

  • After clamping the profiles, the welding is
    carried out automatically

  • The moveable right welding unit is
    equipped with a brake system

  • For safety reasons, the clamp pistons
    operate with low pressure

  • Equipped with two pcs. of support arms


























3 kW 5060Hz 230V
32 Lt/dak.
68 Bar
max h:130mm. b:140mm.(max.) a:30-180
W: 75 L: 430 H: 170 cm.
720 kg.

580 kg.

View Complete Details

PVC SINGLE CORNER WELDING MACHINE


  • Enable the welding of all angles between
    30-180infinitely adjustable

  • Practical adjustment of standard (2 mm) or
    seamless (0.2 mm) welding options
    manually

  • Welding possibility for very high (180 mm)
    profiles

  • All parameters such as melting and
    welding time, welding pressure are set
    independently

  • Automatically start and finish the welding
    cycle

  • Adjusting the heat between 0-300C by
    means of the electronic thermostat

  • Easy and smooth welding operations for
    long profiles by means of rotating support
    arms

  • Maintenance friendly, for example clean
    ing of the heater plate and changing of
    the Teflon is very easy by
    means of quick change system

  • Standard equipped with height adjustable
    profile support arms on both side

  • Clamping the profiles separately via foot
    pedal

  • Saving of time by means of practical mold
    change feature


OPTIONAL ACCESSORIES



  • Special welding molds


























1.5kW1 5060 Hz 230V
20 Lt/dak.
6-8 bar
Max: 130 mm a: 30-180
W: 84 L: 84 H: 154 cm.
207 kg

163 kg

View Complete Details

PNEUMATIC WORK BENCH


  • This table is designed to be used for mounting of door, window and blade profilles and
    their Windows

  • It can expand horizontally and vertically for big frames and blades

  • The upper surface of the table can be tilted to a 70 in order to carry out the mounting of
    the glasses

  • For pneumatic and electrical tools that will be used during the mountingprocess, the table
    comes equipped with a pneumatic quick connection and a electrical plug on the side

  • Width (W) X Length (L) X Height (h): W 1800-3250 mm X L 1700-2200mm X H 865mm

  • Maximum Frame Mounting Dimensions 3200 x 2800 mm

View Complete Details

Automatic Edge Bander


  • Flexibility: the configurations and options available, the possibility of gluing up to 12x60 mm and the high feed speed make the Flexa 207 Super a machine without compromise. The MEGA 300 numerical control, supplied as standard, controls all machine functions and allows positioning of the working units with sequential

  • The MEGA 300 numerical control, supplied as standard, controls all machine functions and allows positioning of the working units with sequential start up of the motors according to the working program selected.

  • Reliability: the machine's solid structure, the sturdiness of the working units, thorough designing and mechanical precision and assembly, guarantee flawless panel edgebanding under any working condition.

Panel thickness 8 ÷ 60mm
Coil edging thickness 0.4 ÷ 3 mm
Max. coil edges section 135 mm²
Max coil diameter 780 mm
Max. edging thickness 0.4 ÷ 12 mm
Feed speed 12 -18 m/min
Max. edging surplus with respect to panel thickness 2+2 mm
Min. panel width using (with length at least 210 mm)  
with panel thickness until 40 mm 55mm
with panel thickness from 41 until 60 mm 80mm
with edge thickness more than 3 mm 80mm
Min. panel length (with width at least 100 mm) 140mm
Min. coil edge length 170mm
Min. Strip edge length 250mm
Distance between two consecutive panels with feed speed 12m/min 550mm
Distance between two consecutive panels with feed speed 18 m/min 650mm
Opening Panel Support Rollers 600mm
Height Working Table 950-980mm
Gluing Unit GP-800
Power absorbed 3.0 kW
Glue tank capacity 1.5 Kg
Heating glue time 12 min
End Trimming Unit IK/S
Tool rotation speed 12,000rpm
Blade inclination 0° - 15°
Motor power 0.35 kW
Tilting Trimming Unit TT/1000
Min. panel thickness (TS/K) 8mm
Tool inclination (only TT/1000) 0° - 25°
Min. panel thickness (TT/1000) 12mm
Tool rotation speed 0.65kw
Power of each motor 12,000rpm
Corner Rounding Unit A Super
Tool rotation speed 12,000 rpm
Edging Thickness 0.3-3 mm
Workable panel thickness by trimming 12 - 60 mm
Workable panel thickness by rounding 12 - 45 mm
Tool diameter (excluding radius) 61 x 16 mm
Dust extraction outlets 3 x D=60 mm
Power of each motor 0.35kw
Edge Scraping Unit
Knives with radius 2mm
Min. panel thickness 12mm
Brushing Unit BFN
Motor power 0.13kw
Rotation speed 1400 RPM
View Complete Details

AUTOMATIC EDGEBANDERS

  • Feed speed 7 m/min
  • Panel thickness min 10 – max 45 mm
  • Edge thickness in coils 0, 4 ÷ 2 mm
  • Minimum panel length (Side being processed) 220 mm
  • Minimum panel width 110 mm

Teflon coated glue pot



  • n.6 heating elements: 4 in glue pot, 1 on the tower and 1 inside motorized glue spreader roller

  • The motorised glue spreading roller, with electrical resistance inside, distributes a uniform layer of glue that can be adjusted in thickness on the side of the panel to be processed


Automatic panel feeder with toothed belt



  • Feeding speed 7 m/min

  • Toothed belt with steel strands inside for stiffness.

  • Working table length 1800 mm with Polizene sliding fences

  • N. 7 small rollers with adjustable angle position for panel side pushing. Each roller can be quickly taken out for easy cleaning

  • Front extensible support up to 60 cm with polizene sliding fence.


Logic functioning controller by PLC



  • Thermostatic glue control with automatic standby and temperature

  • Complete automation control of the various operating units

  • Diagnostics system with messages for machine use and maintenance

  • Statistical operating data: total hours of machine use, total and partial metres of edge used

View Complete Details

Dust Collector

Heavy duty Machine housing


Bag diameter 500 mm


Suction Inlet 100 mm x 4holes

View Complete Details

FMJZ-C Sleeve Filter


  • The FMJZ-C sleeve filter is adust collector self-cleaning with compressed air

  • Use: Fine and large dust filtering.

  • Operation: The dusty air passes through the filtering fabric which separates the dust. Cleaning of the sleeves is automatically managed by an economiser with differential pressure switch that controls the head losses and maintains the air flowrate constant.
    Dust collection: The dust is continuously extracted by a feed auger.

  • Composition: Made from self-supporting modular galvanised panels. Consists of a upper module with fan and air inlet hopper, a central module with filtering sleeves, a lower module with legs and dust extraction system

View Complete Details

Panel Saw


  • Fine adjustment of the scoring unit

  • Thickness with adjustable scoring blade 'Leader'

  • The 2 x 45 mitre fence is equipped with a reversible stop and heavy duty wood clamp.

  • Parallel fence with micro adjustment, alu profile can be lowered to the table for narrow cuts with tilted saw blade.

  • Overhead saw guard

  • Digital read out parallel fence

View Complete Details

Cable Interconnect


  • This item is 33113 CABLE, MEXP/CA300 INTERCNECT

  • This product is used for electrical-cables

  • Connects the microExplorer display to the microDrain/ microReel inspection system

  • Provides true accessibility, increased efficiency, and reduced job time

  • Weighs 0.65 lbs. and is 36-Inch long

  • Perfect for small diameter drain inspection

  • Flexible and abrasion resistant plastic with electronic components

View Complete Details

WHEEL FOR PIPE CUTTER


  • 44185 Wheel, Cutter E1032

  • This item is used for Handtools & Tool Organizers , Pliers & Cutters

  • Model E-1032

  • Fits catalog numbers 32895 and 42370

  • Fits model numbers 202 and 360

  • Cuts steel pipe and ductile iron

View Complete Details

HOLE PUNCH SET

  • Approximate Cycle Time 5 seconds
  • Weight 1, 60 kg

  • Effortlessly punch round holes up to 63, 5 mm holes in 3 mm mild steel without burdensome ratcheting or pumping

  • 360 head rotation enables maneuverability in tight spaces

  • Combine with other heads in the RIDGID QuickChange System to maximize efficiency and productivity on the job site

  • RIDGID Hole Punch Dies for quick and clean round hole punching without material jamming

CATALOG NUMBER DESCRIPTION WEIGHT (KG)  
47763 PH-60B Knockout Punch Head Only  1,6 
View Complete Details

Hydraulic Knockout Kits


  • Combines ease of hydraulic operation and precision-ground knockouts to provide clean, quick holes. Available with foot or hand pumps.

  • Precision-ground 3-point punch/die sets. Capacity to 4" in 12 gauge mild or 14 gauge stainless steel.
    Powerful 11-ton hydraulic ram.

  • Pumps equipped with internal safety relief valve.

  • Ram and pump equipped with quick disconnect couplers

CATALOG NUMBER DESCRIPTION WEIGHT  
    LB. KG
23477 HKO-186 1/2"-2" Hydraulic Kit w/Hand Pump (Includes 2 Draw Bolts, Draw Bar, Spacers, 3' Hose)  31.75  14.3 
24587 HKO-1810 1/2"-4" Hydraulic Kit w/Hand Pump  61.25  27.7 
ACCESSORIES        
CATALOG NUMBER DESCRIPTION WEIGHT  
    LB. KG
17597 3/4" Draw Bolt (For 3/4"-4" Punches and Dies)  2.25  1.0 
17602 3/8" Draw Bolt (For 1/2" Punches and Dies)  0.50  0.2 
21847 3' Hydraulic Hose for Hand Pumps  3.00  1.4 
21857 10' Hydraulic Hose for Foot Pumps  7.00  3.2 
24537 8R111S Ram For Pumps  6.25  2.8 
24542 H-18 Hand Pump with Elbow  10.00  4.5 
24582 Spacer Group (Inc. Long, Med., Short Spacer)  1.25  0.5 
View Complete Details

Latching Round Crimp Head


  • Classified to UL 1976 for Copper Connectors and Wire From #8AWG to 600 Kcmil and Aluminum Connectors and Wire From #8AWG to 350 Kcmil

  • Quick release latching system for maximum efficiency

  • Crimp dies quickly snap into head no push button or adapters to change dies

  • Slim compact design and 360 head rotation enables access to tight spaces

  • Compatible with 6 Ton dies from RIDGID and other manufacturers*

  • LR-60B designed for 6-Ton U Dies ONLY






























Crimp Capacity Up to 600 Kcmil (300mm) Copper and 350 Kcmil (240mm) Aluminum Wire and Connectors
Approximate Cycle Time 5 seconds
Crimp Head Weight 3.3 lbs (1.5kg)
LR-60B Crimp head can be purchased as part of a kit for the RE 6 / RE 60 Electrical Tool or as a separate crimp head to add to an existing kit

CATALOG NUMBER DESCRIPTION WEIGHT    
    LB. KG  
47753 LR-60B Latching Round Crimp Head Only  3.3  1.5   
56498 RE 6 Electrical Tool Kit with SC-60 Scissor Cutter Head with Cu/AL Blades and LR-60B Die Crimp Head  30.9  14.0   
56503 RE 6 Electrical Tool Kit with LR-60B Die Crimp Head  25.6  11.6   
56508 RE 6 Electrical Tool Kit with SC-60 Scissor Cutter Head with Cu/AL Blades, LR-60B Die Crimp Head and Swiv-L-Punch Knockout Punch Head  36.8  16.7 
View Complete Details

MANUAL CABLE CUTTERS

Features


Manual Ratchet Action Cutters



  • Unique ratchet mechanism provides easiest cuts with less fatigue

  • Light-weight and compact design for single-handed use (RC-40 and RC-55)

  • Long ergonomic handles (RC-70) provide easier cuts on large size cables

  • Pawl release allows blades to be released any point during cutting

  • Lock/unlock mechanism secures tool when not in use

  • Enclosed spring is protected from debris and loss during use

  • Highest quality blades for durability and longest lifetime


Manual Leverage Cutters



  • Longer handles give more leverage and reduced operator fatigue

  • Sickle-shaped, rounded blades assure precise cutting

  • Robust design with impact resistant coated and hardened handles

  • Highest quality blades for durability and maximum performance and life

  • Soft grips provide additional handle ergonomics

CATALOG NUMBER MODEL NO. MAX. CABLE CAPACITY (W/ INSULATION) WEIGHT   LENGTH  
      LB. KG IN. MM
54288 RC-40  40 mm / 600MCM Copper / 750MCM Aluminum  1.5  0.7  9.4  240 
54293 RC-55  55 mm / 750MCM Copper / 1000MCM Aluminum  3.3  1.5  12.2  310 
54298 RC-70  70 mm / 1000MCM Copper / 1000MCM Aluminum  6.4  2.9  21.7  550 
MANUAL LEVERAGE CUTTERS            
CATALOG NUMBER MODEL NO. MAX. CABLE CAPACITY (W/ INSULATION) WEIGHT   LENGTH  
      LB. KG IN. MM
54278 MC-30  250 mm² & 31 mm / 500MCM Cu/Al  3.1  1.4  21  525 
54283 MC-50  500 mm² & 50 mm / 1000MCM Cu/Al  6.6  3.0  30  770 
View Complete Details

Manual Knockout Kits


  • Precision-ground 3-point punch/die sets. Capacity to 2" in 10 gauge mild or 12 gauge stainless steel.

  • H-D ball bearing drive screws.

  • Sets include durable ABS storage case.

  • Three kits available, including deluxe ratchet drive.

CATALOG NUMBER DESCRIPTION WEIGHT  
    LB. KG
31787 R735BB 1/2"-1 1/4" Ball Bearing Kit w/Case  6 1/4  2.8 
31792 R737BB 1 1/2"-2" Ball Bearing Kit w/Case  7 1/2  3.3 
31797 R739BB 1/2"-2" Ball Bearing Kit w/Ratchet Wrench & Case  11  5.0 
ACCESSORIES        
CATALOG NUMBER DESCRIPTION WEIGHT  
    LB. KG
31802 3/8" Ball Bearing Bolt  0.4 
31807 3/4" Ball Bearing Bolt  1 3/4  0.7 
31817 5/8" x 1" Ratchet Wrench  1 1/2  0.7 
17597 3/4" Draw Bolt (For 3/4"-4" Punches and Dies)  2 1/4  1.0 
17602 3/8" Draw Bolt (For 1/2" Punches and Dies)  1/2  0.2 
 
View Complete Details

ACSR Cable Trimmer


  • Trims 85 sizes of ACSR cable from 8 AWG to 1, 780, 000 circular mils (C.M.).

  • Bushings for 9 popular cable sizes from 1/0 AWG through 1, 780, 000 C.M. available from stock.

  • The operation of the tool is similar to that of a conventional tubing cutter.

  • The bushing holder, cutter and handy carrying case are sold as one unit.

  • Case contains storage sockets for 11 bushings. Twelfth bushing is stored in holder.

CATALOG NUMBER MODEL NO. DESCRIPTION WEIGHT  
      LB. KG
54135 87  ACSR Cable Trimmer (Includes Bushing Holder, Cutter, Carrying Case)  9 1/2  4.30 
54270 E-4695  E-4695 Cutter Wheel  0.02 
  CATALOG NUMBER BUSHING NO. A.W.G. OR C.M. NO. OF STRANDS
54440 E-5761  2/0  6/1   
54445 E-5762  2/0  6/1   
54450 E-5763  4/0  6/1   
54465 E-5766  266,800  26/7   
54480 E-5769  336,400  26/7   
54500 E-5773  397,500  26/7   
54520 E-5777  477,000  26/7   
54540 E-5781  556,500  26/7   
54575 E-5788  636,000  54/7 24/7 
View Complete Details

Scissor Cutter Head


  • Interchangeable heads and blades for cutting up to 50 mm diameter copper/aluminium standard building wire and copper fine stranded wire or up to 30 mm diameter ACSR cable.

  • 360 head rotation enables maneuverability in tight spaces.

  • Combine with other heads in the QuickChange system to maximize efficiency and productivity on the job site.









Capacity and Material Interchangeable heads and blades for cutting up to 50 mm diameter copper/aluminium standard building wire and copper fine stranded wire or up to 30 mm diameter ACSR cable.

CATALOG NUMBER MODEL NO. DESCRIPTION WEIGHT  
      LB. KG
52093 RE 6  RE 6 Electrical Tool Kit w/SC-60C Scissor Cutter, 4P-6 4PIN™ Dieless Crimp Head and Swiv-L-Punch™ Knockout Punch Head  37.3  16.9 
52098 RE 6  Electrical Tool Kit w/SC-60C Scissor Cutter Head and 4P-6 4PIN Dieless Crimp Head  31.4  14.2 
52113 RE 6  Electrical Tool Kit w/SC-60C Scissor Cutter Head and Swiv-L-Punch Knockout Punch Head  31.5  14.3 
52108 RE 6  Electrical Tool Kit w/SC-60C Scissor Cutter Head with Cu/Al Blades  25.6  11.6 
52133 RE 6  Electrical Tool Kit w/SC-60C Scissor Cutter Head with ACSR Blades  25.6  11.6 
52088 RE 6  Electrical Tool Kit (No Heads)  20.8  9.4 
46818 RE 6  Electrical Tool Only  5.5  2.5 
49408 SC-60C  SC-60 Cutter Head with ACSR Blades  4.7  2.1 
ACCESSORIES          
CATALOG NUMBER MODEL NO. DESCRIPTION WEIGHT  
      LB. KG
52083   RE 6 Electrical Tool Case Only  11.3  5.1 
47923   SC-60C Replacement Blades for Cu/Al Wire  1.1  0.5 
47928   SC-60C Replacement Blades for ACSR  1.1  0.5 
44693   18V Advanced Lithium 2.0Ah Battery  1.0  0.5 
44698   18V Advanced Lithium 4.0Ah Battery  1.5  0.7 
44798   Charger Replacement Cord (N. America)  0.3  0.1
View Complete Details

Core Drill Bits


  • All RIDGID segmented diamond drill bits are laser welded for superior strength. They are three times stronger than conventional brazed bits. RIDGID core bits are available in 2 styles: Premium Red and High Speed Premium Red. Premium Red core bits are heavy-duty, multi-purpose bits for drilling in many types of materials including reinforced concrete, cinder block, stone, etc. High Speed Premium Red core bits are designed for high speed drilling. Unique diamond segment design can increase drilling speed as much as 30% over conventional bits.

CATALOG NUMBER BIT DIAMETER WEIGHT          
  IN. MM LB. KG        
98220 2 1/2  5.00  2.3         
98225 2 3/4  5.50  2.3         
98240 8.00  3.6 

 

CATALOG NUMBER BIT DIAMETER WEIGHT          
  IN. MM LB. KG        
51507 4.05         
51517 6.00         
51522 3 1/2  6.50         
51527 8.00         
51537 11.50         
51542 14.00         
51547 22.00         
51557 12  41.25         
BIT EXTENSION RODS AND ADAPTERS              
CATALOG NUMBER LENGTH   FITS BIT SIZE   THREAD   WEIGHT  
  IN. MM IN. MM IN. MM LB. KG
98690 1 - 1 1/2  5/8 - 11  1 1/4 
98695 12  1 - 1 1/2  5/8 - 11 
98700 1 3/4  1 1/4 - 7  2 1/4 
98705 1 3/4  1 1/4 - 7  3 1/4 
98710 12  1 3/4  1 1/4 - 7  6 1/4 
98720 1 1/4  -

 

View Complete Details

HOLESAW M-C

  • Hole Cutting Capacity Up to 4 3/4" (120 mm) (Sch 10, 40 and 80 Pipe Dia.).
  • Pipe Diameter Mounting Range 1 1/4" to 8"
  • Motor Universal, 115V, 25-60Hz 13Amp, 1.2 HP. Approved by CSA to CSA and UL standards.
  • Output Speed 110 RPM (no load).
  • Chuck Size 1/8'' - 5/8''
  • Arbors up to 1⁄8'' (3 mm) - 5/8'' (16 mm)
  • Height 11 1/2".
  • Length 17".
  • Width 17".

  • Engineered for continuous dry or oiled hole cutting.

  • Dual-side controls provide easy operation.

  • GFCI and a built-in breaker for operator protection.

  • Two carrying handles ease mounting and alignment.

  • Built-in level for multiple hole alignment.


The RIDGID Model HC450 is engineered for continuous 14" (6 mm) to 4 34" (120 mm) hole cutting in and up to 8" (203 mm) diameter steel unpressurized pipe. The built-in level ensures line up for multiple holes when branching lines using Mechanical T, Vic-O-Let fittings or welded saddles. The HC450 is ideal for mechanical, industrial maintenance and fire protection contractors since it cuts holes into a wide variety of pipe materials. No off-the-shelf drill-based hole cutter compares in performance or durability to the rugged purposed-built Model 450.

CATALOG NUMBER MODEL NO. DESCRIPTION WEIGHT  
      LB. KG
57592 HC450  4 3/4" Hole Cutting Tool, 115V, 50/60 Hz  42  19.0 
57597 HC450  4 3/4" Hole Cutting Tool, 230V, 50/60 Hz  42  19.0 
25668 HC450  4 3/4" (120 mm) Hole Cutting Tool, 115V  42  19.0 
Note: The HC450 is not a hot tapping tool.        
  ACCESSORIES          
CATALOG NUMBER MODEL NO. DESCRIPTION WEIGHT  
      LB. KG
84427 HC-450/HC-300 Carrying Case  19  8.6 
59502 R4  5/8" Arbor only for Hole Saws  1/4  0.1 
59132   Chuck Key  1/4  0.1 
View Complete Details

Reciprocating Saw Blades


  • High quality blades for every application. Available in carbon, or bi metal consisting of a high-speed steel cutting edge welded to a flexible alloy steel back for wood or metal cutting. RIDGID blades will fit in all reciprocating saws and are packed in plastic sleeves with five blades or 50 blades.

CATALOG NUMBER MODEL NO. LENGTH   WIDTH   GAUGE   TPI
    IN. MM IN. MM IN. MM  
80520 D-988  75  5/16  0.035  0.9 
80500 D-984  100  3/4  20  0.035  0.9 
80480 D-980  100  3/4  20  0.035  0.9  18 
80485 D-981  100  3/4  20  0.035  0.9  24 
56892 D-993  150  3/4  20  0.035  0.9  10 
80505 D-985  150  3/4  20  0.035  0.9 
95872 DP-985  150  3/4  20  0.035  0.9  14 
80510 D-986  150  3/4  20  0.035  0.9  18 
95877 DDP-986  150  3/4  20  0.035  0.9  18 
80515 D-987  150  3/4  20  0.035  0.9  24 
47082 D-989  150  3/4  20  0.050  1.3 
56897 D-994  200  3/4  20  0.035  0.9  10 
51022 D-992  225  3/4  20  0.050  1.3 
47087 D-990  12  300  3/4  20  0.050  1.3 
View Complete Details

Imager Head Accessory


  • 6 mm camera head, nearly one-third the size of the standard camera head.

  • Enables detailed inspections in very confined spaces.

  • 4 LED lights provide clear images.

  • Fully flexible cables for easy navigation.

  • Sleek aluminum construction withstands demanding applications.

  • Compatible with: RIDGID micro CA-100, micro CA-300, microEXPLORER and SeeSnake micro systems.*

Camera Head – 6 mm Diameter, Aluminum Construction.    
Compatibility – RIDGID® micro CA-100, micro CA-300, microEXPLORER, and SeeSnake micro*    
       
CATALOG NUMBER DESCRIPTION WEIGHT  
    LB. KG
37093 6 mm Imager with 4 m Cable  * 0.9  0.4 
37098 6 mm Imager with 1 m Cable  * 0.8  0.3 
View Complete Details

A-Frame Fault Locator

  • Operating Frequencies Direct Fault Finding: 797 Hz - “dFF” displayed
  •   Path locating: 128 Hz, 1 kHz, 8 kHz, 33kHz, 93 kHz
  •   Direct Connect: 128 Hz, 1 kHz, 8 kHz, 33kHz, 93 kHz
  •   Inductive Clamp: 8 kHz, 33 kHz, 93 kHz
  •   Broadcast Inductive: 33 kHz, 93 kHz
  • Load Range 5 Ω to 2M Ω
  • Output Power Up to 3 Watts (Low, medium and high settings)
  • Output Voltage 5 Volts - 600 Volts
  • Power Supply 8 × C-Cell Batteries (Included)
  • Dimensions (LxWxH) 8.5" x 5.8" x 2.5"
  •    
  • FR-30 A-FRAME RECEIVER  
  • Fault Finding Depth Up to 20' (depending on conditions)
  • Fault Finding Length Up to 3 miles (depending on conditions)
  • Display Black and White LCD
  • Power Supply 6 × AA Batteries
  • Dimensions (LxWxH) 30.3" x 30.4" x 1.5"

  • Purpose-built directional fault finder

  • Locates insulation faults up to 2 megohms

  • Reference readout to determine fault location

  • Durable, lightweight powder-coated aluminum frame

  • Weather proof membrane buttons

  • Made in the U.S.A.

CATALOG NUMBER DESCRIPTION WEIGHT  
    LB. KG
56613 A-Frame Fault Locator (FR-30) and Receiver (FT-103)  5.2  2.3 
ACCESSORIES      
       
CLICK ON A CATALOG NUMBER LINK TO VIEW ITS STANDARD EQUIPMENT.    
       
  CATALOG NUMBER DESCRIPTION WEIGHT  
    LB. KG
20973 SeekTech 4” (100 mm) Inductive Signal Clamp  2.0  0.90 
22163 SeekTech SR-60 Line Locator  5.1  2.30 
44473 SR-24 Line Locator with Bluetooth® and GPS  4.0  1.80 
21893 SeekTech SR-20 Line Locator  4.0  1.80 
View Complete Details

CrossChek Inspection System


  • Designed for bore slots 1.75 to 3 wide.

  • Easily integrated into your current boring process.

  • Keep digital video documentation of each inspection.

  • Works in most soil types, including wet clay and dry sand.

CATALOG NUMBER DESCRIPTION WEIGHT  
    LB. KG
42323 CrossChek Rig (nanoReel)  4.0 
42328 CrossChek Rig (microDrain)  4.0 
42333 CrossChek Rig (microReel)  4.0  1.8 
49528 CrossChek Rig (Mini Reel)  4.0  1.8 
View Complete Details

Digital Reporting Monitor With Wi-Fi

  • Weight (without battery) 9.3 lb (4.2 kg)
  • Dimensions (LxWxH) 16” x 12.5” x 9.5” (406 x 319 x 242 mm)
  • Power Source 18V Advanced Lithium Battery or AC Power Cable
  • Power Rating 15 to 25 VDC, 25W
  • Operating Temperature 14°F to 122°F (-10°C to 50°C)
  • Storage Temperature -4°F to 140°F (-20°C to 60°C)
  • Display 6.5” (165 mm) Color LCD
  • Display Resolution 640 x 480 Pixels, VGA
  • Video Format MPEG4 (H.264) 30 FP
  • Photo Format JPEG
  • Autolog Format MPEG4 (H.264) Variable Frame Rate
  • Audio Integrated Microphone and Speaker
  • Internal Storage 128 GB SSD
  • Transfer Method USB Drive

  • Wi-Fi


Stream or record inspections to an iOS or Android phone or tablet with the free HQx Live companion app Storage Options



  • Storage Options


Internal solid state drive provides ample storage of images and videos captured from multiple jobs


Dual USB ports makes for easy delivery of multiple copies of an inspection



  • Internal GPS


Geotag media with positional information when available



  • Water-resistant Keyboard


Easily add on-screen titles and annotate reports



  • Daylight Viewable Display


Provides a crisp, clear, in-pipe image

CATALOG NUMBER DESCRIPTION WEIGHT  
    LB. KG
54363 CS65x Digital Reporting Monitor w/Wi-Fi  9.3  4.2 
55978 CS65x w/2 Batteries and 1 Charger  13.1  5.0 
View Complete Details

Floating Transmitter


  • Ideal for locating septic tanks.

  • 512 Hz signal.

  • Flashing LED indicates that sonde is transmitting.

  • Flushable.

  • Battery-powered.

  • Meets FCC Class B and EN 55022 Class B requirements.

CATALOG NUMBER DESCRIPTION WEIGHT  
    LB. KG
19793 Float Sondes (2), Plus Extra Battery  0.4  0.18 
View Complete Details

INSPECTION CAMERA HAND HELD MICRO

  • Display 3.5" color LCD (320 x 240 resolution).
  • Camera Head 17 mm diameter, aluminum construction.
  • Lighting 4 LEDs with adjustable brightness.
  • Cable Reach 3' (90 cm) expandable to 30' (9 m) with optional extensions.
  • Image/Video Format Still Image - JPEG (640 x 480). Video - MP4 (640 x 480 resolution).
  • Video Output 3' (90 cm) RCA cable included (640 x 480 resolution).
  • Waterproof Camera and cable to 10' (3 m) when properly assembled.
  • Power Source 3.7V Li-Ion battery or 5V AC adapter.
  • Image Rotation 4 x 90˚.
  •    
  •   Digital Zoom
  • Yes.  
  • Internal Memory 235 MB.
  •   SD-card

Documentation made easy with the RIDGID micro CA-300 Inspection Camera, the next evolution of the microEXPLORER. Easily record still images and videos of problems in hard-to-reach areas and save these on the internal memory (235 MB) or the included 4 GB SD-card. Comfortable pistol-grip design, large screen and rugged anodized aluminum camera head with four bright LEDs make it easy to detect and diagnose the unreachable. Get the perfect view with enhanced features like image rotation and digital zoom. Besides the replaceable 3.7V Li-Ion battery, the micro CA-300 can also be powered with the included AC Adapter which is ideal for time consuming (drain) inspection jobs or when you simply run out of battery.

CATALOG NUMBER DESCRIPTION WEIGHT  
    LB. KG
37098 6 mm Imager with 1 m Cable  * 3/4  0.34 
37093 6 mm Imager with 4 m Cable  * 22/25  0.40 
37108 3' Cable Universal Extension  7/10  0.32 
37113 6' Cable Universal Extension  1 2/5  0.64 
30208 Car Charger (DC) Adaptor  13/50  0.12 
  * Not compatible with original micro inspection camera 25643 (rotary power switch design).      
REPLACEMENT PARTS      
CATALOG NUMBER DESCRIPTION WEIGHT  
    LB. KG
37103 17 mm Replacement Imager   0.7  0.3 
37123 Mirror, Hook & Magnet for 17mm Camera Head  0.1  0.0 
37083 micro CA-300 3.7 Li-Ion battery  0.2  0.1 
37088 micro CA-300 3.7V Battery Charger  0.2  0.1
View Complete Details

LINE TRANSMITTER

  • Direct Connect 128 Hz, 1 kHz, 8 kHz, 33 kHz and 93 kHz.
  • Induction 1 kHz, 8 kHz, 33 kHz, 262 kHz.*
  • Competitor Frequencies Available in both direct connect and induction.
  •   *Up to 93 kHz for devices sold in Europe.

  • Ten watts of fully variable power output

  • LCD display provides instant visual feedback on line resistance and current flow

  • Two 25' (7, 62 m) lead wires with heavy duty clips

  • Audio feedback confirms a good circuit before beginning a trace

CATALOG NUMBER DESCRIPTION WEIGHT    
    LB. KG  
21903 SeekTech ST-510 Transmitter (10 watts)  3.4 
 

View Complete Details

Combustible Gas Detector

  • Power Source 4 x AA batteries (included).
  • Detection Range 0 to 6400 ppm (Methane).
  • Alarm Sensitivity 40 ppm (Methane).
  • Calibration Automatic.
  • Alarms Visual, audible and vibration.
  • Gases Detected* Methane, Hydrogen, Propane, Ethylene, Ethane, Hexane, Iso-Butane, Benzene, Iso-Butane, Ethanol, Acetaldehyde, Toluene, P-Xylene, Ammonia, Hydrogen Sulfide.
  •   *Common mixtures that would include or emit more than one of these gases include natural gas, paint thinners, industrial solvents, dry cleaning fluids, and gasoline

  • Rugged ergonomic design makes it comfortable to use, yet tough.

  • Tri-Mode Detection for option to be alerted with a visual, audible or vibration alerts which can be adjusted for your environment.

  • Adjustable sensitivity settings provide precise leak locating with the touch of a button.

  • 16" (40 cm) flexible probe allows location and detection of leak in hard-to-reach and confined spaces.

  • Field replaceable sensor means more up-time and less time waiting for repairs.

CATALOG NUMBER MODEL NO. DESCRIPTION WEIGHT  
      LB. KG
36163 micro CD-100  Combustible Gas Detector  1.0  0.45 
31948 CD-100 RS  Replacement Sensor 
View Complete Details

Magnetic Locator

  • Length 39.25" (100 cm)
  • Operating Temperature 0°F to +120°F (-18°C to +49°C)
  • Storage Temperature -13°F to +140°F (-25°C to +60°C)
  • Power Supply 6 x AA Alkaline Batteries Included
  • Weight 1.7 lbs. (0, 77 Kg)
  • Display Black and White LCD
  • Speaker Durable Mylar Speaker
  • Body Material/Construction Aluminum Tube with Recessed Controls
  • IP Protection IP54

  • Quickly locate buried iron or steel objects such as: Valve/Curb Boxes, Manhole Covers, Cast Iron Pipes, Steel Enclosures, Well Casings, Reinforced Septic Tanks, Survey Pins.

  • Ergonomic rugged design includes carrying case and batteries.

  • Highly sensitive instrument with audio and visual feedback.

  • AutoNull feature blocks out nearby metallic interference such as an automobile or chain link fences.

CATALOG NUMBER DESCRIPTION WEIGHT  
    LB. KG
53068 MR-10 Magnetic Locator with Case  1 7/10 
View Complete Details

Remote Transmitter


  • Can be attached to a drain cleaning cable or a water jet hose to locate the remote transmitter in a line.

  • Flashing LED indicates that sonde is transmitting.

  • Meets FCC Class B and EN 55022 Class B requirements.

CATALOG NUMBER DESCRIPTION WEIGHT  
    LB. KG
16728 Remote Transmitter, 512-AAA  0.4  0.18 
ACCESSORIES        
CATALOG NUMBER DESCRIPTION WEIGHT  
    LB. KG
19258 Adapter for 1¼" (32 mm) Sectional Cable 
19263 Adapter for 5/8” & ¾” (16 mm & 20 mm) Drum Machine Cables 
19268 Adapter for 7⁄8" (22 mm) Sec. & 1⁄2" (12 mm) Drum Machine Cables 
19273 Adapter for 5⁄8" (16 mm) Sec. & 3⁄8" (10 mm) Drum Machine Cables 
View Complete Details

SeekTech Inductive Signal Clamp


  • Allows users to apply a signal to a cable or pipe when direct connection is not possible.

  • Compatible with all RIDGID transmitters.

CATALOG NUMBER DESCRIPTION WEIGHT  
    LB. KG
20973 SeekTech 4” (100 mm) Inductive Signal Clamp  0.9 
View Complete Details

THERMOMETER INFRARED MICRO

  • Temperature Range -58° to 2192°F (-50° to 1200°C)
  • Measurement Accuracy 58°F to 68°F (-50°C to 20°C) ±4.5°F (2.5°C); 68°F ~2192°F (20°C ~1200°C); ±1.0% or ±1.8°F (1.0°C)
  • Distance To Spot Ratio 30 to 1
  • Response Time <150ms
  • Emissivity Adjustable, 0.10 - 1.00
  • Temperature Display Current Temperature, MAX Temperature
  • Measurement Units Fahrenheit, Celsius
  • Power Source Battery (1 x “9V”) Included

  • Ultra Sharp Dual Class II Lasers easily illuminate the surface area being measured

  • Ergonomic Pistol Style Grip with rugged over molding allows you to keep a solid grip in the harshest of industrial environments

  • 20:1 Distance To Spot Ratio allows you to take more accurate measurements from long distances

View Complete Details

DIGITAL RECORDING MONITOR

  • Power Source 1 or 2 RIDGID 18V Advanced Lithium battery (optional) or AC plug
  • Weight 13 lbs. (5.9 kg)
  • Length 14.3" (36.3 cm)
  • Width 11.9" (30.2 cm)
  • Height 12.4" (31.5 cm)
  • Display 12.1" daylight readable LCD
  • Resolution 640 x 480
  • Audio Integrated microphone and speaker
  • Video AVI 20FPS - 720 x 480
  • Image JPG - 720 x 480
  • Transfer USB stick
  • Software Includes SeeSnake HQ Software

  • USB Stick - record digitally into a format that your customer can read on their computer.

  • 12.1" Daylight Readable Display - easily monitor and record inspections in bright outdoor environments.

  • Integrated Line Tracing - trace the reel push cable with a RIDGID locator (requires a RIDGID transmitter).

  • Multi Mode Recording - take snapshots, record full frame video and record in a lean Auto-log video format (small files).

  • Software Integration - with SeeSnake HQ, deliver your inspections in a wide array of formats from online to DVD.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr. Muhannad Hasan (midco equipment xxxxx)
  • bmw, sharjah, UAE
  • Share us via