Misterlight Electrical Installation Trading L.L.C Dubai

Cables FIRECEL SR are designed to work also during the fire. The emission of smoke in this Situation is free from corrosive gas and they have low density to guarantee people safety and protection for equipments. Applications Hotels Theatres and cinemas Museums Hospitals Shopping centers Skyscrapers Offices Schools Airports Undergrounds and tunnels Railway stations Computer systems Alarm systems Traffic control Systems Fire fighting systems

• IEC 60793-1Optical fibre characteristics
• IEC 60794-1Optical fibre cable characteristics
• IEC 60332-3 EN 50266Fire retardant
• IEC 60332-1 EN 60332-1Flame retardant
• IEC 60754 EN 50267-2Test on gases evolved during combustion
• IEC 61034-2 EN 50268-2Low smoke emissio

In SIM and SIM(S) cables, the coated fibre is protected by a reinforcement layer made of aramidic yarns and by a LSZH (M1) sheath. In MIC cable, the bare fibre is protected by a reinforcement layer made of aramidic yarns and by a LSZH (M1) sheath with a very small diameter (0, 9 mm). It is suitable for applications where the space is limited. The DUP cable is formed by two singlefibre SIM placed side by side, easily separable and suitable for direct connector installation. The DDG cable is formed by two singlefibre SIM placed side by side and protected with LSZH (M1) sheath having an oval section to grant a higher mechanical protection. In case of use of semi-tight fibres, the code becomes: SIM(S) – DUP(S) – DDG(S) Dimensions different from the standard Different materials for the sheath: • PVC • Polyurethane Colours upon request

• BS 5308 or EN 50288-7Basic design
• IEC 60332-1Flame retardant
• IEC 60332-3Fire retardant (cat. C or A according to requirements)
• IEC 60754-1Halogen free properties (only for LSZH cables)
• IEC 61034-2Low smoke emission (only for LSZH cables)

Can be used in cable tray or conduit to connect different types of thermocouple in industrial process controls, refineries, oil and gas plants. Temperature range -20 °C to +80 °C (for general use); -40 °C to +90 °C (on request). Minimum bending radius Not armoured type: 12 times the outer diameter (for conductors class 1 and class 2); 10 times the outer diameter (for conductors class 5). Armoured type:  15 times the outer diameter. Calibration and colours according to BS – DIN – NF – UNI. Stranded conductors. Galvanized steel wire braid (GSWB) or galvanized steel tape armour (GSTA). Sheath materials can be provided for excellent water, oil, hydrocarbons, UV resistance or other special performance. Cable construction Conductors Solid alloy. Calibration ANSI MC 96.1 or IEC 60584-3. Insulation PVC, PE, XLPE or LSZH thermoplastic material. Twisting The insulated cores shall be twisted in pairs/triads for a good reduction of the electromagnetic noise. Individual screen Aluminium/polyester tape, coverage >100%, aluminium in contact with tinned copper drain wire. Cabling The screened pairs are cabled with suitable non hygroscopic fillers (when necessary) and wrapped with polyester tape if required. Overall screen Aluminium/polyester tape, coverage >100%, aluminium in contact with tinned copper drain wire. Inner sheath PE, PVC or LSZH thermoplastic material. Armour Single layer of galvanized steel wires (SWA). Outer sheath PVC or LSZH thermoplastic material.

Tri-rated Cable (H07V2-K) to BS6231