Other Products / Services #5832008

Norden Category 5E Cables exceed Category 5E/ Class D specification. It is tested to 100MHz frequency range and designed to support Gigabit 1000Base-T applications to full 100m. Norden Category 5E double jacket cables used in digital distribution frames in transmission stations, fixed & portable indoor applications, harsh environmental outdoor applications with UV rated FR PVC outer Jacket.Extremely high pair-balance providing excellent EMC (Electro Magnetic Compatibility), minimizing radiation, maximizing noise immunity and providing high alien cross talk performance.

NordenCat 6 Shielded Keystone Jack Tool Less 180Dare shielded with a two part case giving optimum protection from electromagnetic interference from an outside source. The rear casing is clicked into place after shielded cable has been fed through the centre and terminated to the jack. These Jacks are designed to reduce the Insertion loss & alien cross talk in order to provide maximum flexibility and high performance for all 10G Ethernet applications and are available in a 180 orientation with back interconnection of Dual IDC blocks in universal pin/pair assignment.180 orientation provides perfect termination with minimum distance to the IDC. This is tested to 250 MHz range over 100m and supports T568 A&B wiring & easy installation. The jack is manufactured with an integral cable strain relief. They can be installed into a number of faceplates and unloaded shuttered modules and backward compatible with category 5e/class D system components.

Norden Category 5e UTP keystone Jacks exceed category 5e performance with component and channel performance to 100 MHz can be used in unloaded patch panels, faceplates and shutters, in a variety of colour options. These Jacks are designed to reduce the Insertion loss & Alien cross talk in order to provide maximum flexibility and high performance for all 10G Ethernet applications and are available in a 90 orientation with a dual termination block which will allow the installer to terminate with either a 110 or Krone insertion tool (Dual IDC). 90 orientation provides perfect termination This supports T568 A&B wiring & easy installation. The jack is manufactured with an integral cable strain relief.

UTP keystone jack with shutter exceed TIA/EIA and ISO component and channel performance, can be used in unloaded patch panels, faceplates and shutters, in a variety of colour options. These Jacks are designed to reduce the Insertion loss & Alien cross talk in order to provide maximum flexibility and high performance and are available in a 180 orientation with a dual termination block which will allow the installer to terminate with either a 110 or Krone insertion tool. This supports T568 A&B wiring & easy installation. The jack is manufactured with an integral cable strain relief.

Blank cover fits on a wall plate, commonly uses when there is not e- nough modules to fill, available in quarter, half and full sizes.

Applicable for all NORDEN patch panel to maintain the configuration with its desired number of ports while balance empty port can be covered up with keystone inserts blank.

Bracket mounts a wall plate without back box and is commonly used as a snap in accessory for wall plates, available for keystone & fibre adaptors in 45, 90 angled. Norden wall plate mounting bracket inserts into the wall opening, flexible tabs bend up to secure the bracket to the opening. LJ6C angled brackets for floor boxes also available in 45 or 90.

Norden Keystone Jack Termination tool is used for modular termination. This crimping tool was developed to meet the needs of the most discerning and quality sensitive installation professionals in multiple markets including commercial, residential, high end data centers & military. It delivers the better quality and consistent modular plug terminations .

Norden Keystone Jack holder is designed to stabilize the keystone jack during the termination.It can reduce the punch down impact and can support of 90D & 180D of Cat 5e & Cat 6 Keystone Jack.

Norden Category 3 U/UTP cable exceeds Category 3/Class Cspecification. It is tested up to 16 MHz frequency range. Thesecables are used for voice and data communications and can handleapplication bandwidths up to 16 MHz. Other uses for these cablesinclude internal use on customer premises for the interconnectionof telephone key systems, PBX and intercom systems.

Norden Category 3 U/UTP cable exceeds Category 3/Class C specification. It is tested up to 16 MHz frequency range. These cables are used for voice and data communications and can handle application bandwidths up to 16 MHz. Other uses for these cables include internal use on customer premises for the interconnection of telephone key systems, PBX and intercom systems.

Rack mount 19 cross connection panels provide horizontal management and organization of patch cables and jumper wire .They also incorporate legs for backboard mounting, allowing the cable to be routed from behind. This panel requires connecting blocks / clips. The Panels are available in 100, 200, 300 and 400 pair.

110 wiring system is the ideal way of terminating cable for cross connecting data and Voice, offering reliable and economical high-density system. This connecting block system is tested and verified to meet and exceed Category 6 connecting hardware performance requirements.

The wall mount wiring block is available with or without legs. Cable access openings allow cables to be routed through wiring blocks directly to point of termination. The speedy punch down on the block base ensure to reduce the installation time and cost. The termination of cable on 110 wiring blocks is achieved with the use of 110 tools. The blocks are available in 50 pair and 100 with or without legs.

110 wiring blocks allow designation labels to be mounted between each row of connecting blocks. Each label has 2-, 3-, 4-, and 5-pair markings and may be used for colour-coding services in accordance with TIA/EIA-606-A.

The magazines are designed for the complete equipped connection or disconnection modules. Compatible with overvoltage protection in analogue telecommunication systems. The overvoltage arrestors and the fail-safe elements can be replaced to new one. Designed for use with two or three pole overvoltage arrestors.

3 pole overvoltage arrestor (metallic/ceramic) filled with noble-gas and optional fail-safe, type 8x13. Reliable limitation of over voltages and diversion of high currents.

The wall mounted distribution cabinets are designed for easy installation. The metal bars can accommodate either connection or discon- nection modules. The Cable glands in various sizes and numbers for cable feed in through floor and roof rubber holes are provided with the cabinets. The boxes are manufactured in mild steel and finished in grey colour.

The box can be mounted with 10, 20, 30, 50, 100pair LSA disconnection module. Waterproofbox suit external wire distribution. The box iswith key lock.

This Eurostyle BT module available as Master, PBX Master or secondary. This module compatible with Eurostyle faceplates. The termination for this module through 238A IDC connectors. Manufactured in high quality ABS material.

This mounting frame is used in 19 cabinet for 10 pair modules. Manufactured in stainless steel and with cable manager.

Back mount frames consist of U-shaped stainless steel sheet provides high degree of stability and full corrosion resistance. Based on requirement, back mount frames can be used to fix various number of modules.

This patch plug design utilizes internal pair isolation and layered contacts to improve crosstalk performance. Additionally, plug housing includes built-in polarization to ensure a proper mated connection to connecting blocks. 110 patch plug is tested and verified to meet and exceed category 5e ANSI/TIA/EIA-568-B.2 connecting hardware specifications to support both high-speed data and voice applications.

The Optinor range of wallmount cabinets designed for external environment. It's available in different sizes with splice trays, cable management for splicing incoming and outgoing cables. It comes with locking and earthing systems with the complete protection of fibre cables and accessories. This fibre optic FTTH terminal box is developed for FTTH application . It is very light and compact, especially suitable for protective connection of fibre cables and pigtails in FTTH. It has a special sheilding protection from water & dust. We can use this box for both internal & external purpose.

FTTH model of fibre optic terminal box is a newly developed for application of FTTH. This box is very light and compact, especially suitable for protective connection of fibre cables and pigtails in FTTH

Norden Micro ODF has been developed for FTTH application.This box is very light and compact, especially suitable for protective connection of fibre cables and pigtails in FTTH.

Fibre Optic Splice Trays are used to protect and manage fibres& fibre splices, available in fusion type configurations. The traysare constructed for use with loose tube and tight buffered opticalcables designs, offer variety of unique and flexible splice and storagepossibilities.

The plastic tray consists of an injection-moulded, Black or Grey coloured plastic base that incorporates features to retain fibre loops and control the bend radius. The clear plastic cover allows visibility of the fibres for inspection without opening the tray. Tie-wrap holes provide strain-relief for buffer tubes and tight-buffered fibres. Unique strain-relief tabs are provided for multiple buffer tubes.

Fibre pigtails are used in permanent connections between patch panels and incoming cables / single blown fibres.

Pigtails are pre-constructed with connectors. Connector options include small form factors such as LC, E2000 and MT-RJ as well as SC, FC and ST. These are based on 900m tight buffered cores (600m MT-RJ) and suitable for internal use only inside suitable Fibre Management Systems

Fibre pigtails are used in permanent connections between patch panels and incoming cables / single blown fibres.Pigtails are pre-constructed with connectors. Connector options include small form factors such as LC, E2000 and MT-RJ as well as SC, FC and ST.These are based on 900m tight buffered cores (600m MT-RJ) and suitable for internal use only inside suitable Fibre Management Systems

Norden fusion splice protector sleeves are available in 45mm or 60mmlength and are designed with a stainless steel strength member, Polyolefin copolymer inner tube and polyolefin outer tube for reliablefibre alignment during shipping, handling and installation. fibre splicesleeve is with clear colour to give a good view of the inside jointpart .The fibre splice sleeves are mainly used for single fibre spliceprotection, they can be with custom length and size on request.

The OptiNor range of wall mount cabinets designed for external environment. The cabinet structure is welded and painted with electrostatic spray coating. Its available in different sizes with splice trays, cable management for slicing incoming and outgoing cables. It comes with locking and earthing systems with the complete protection of fibre cables and accessories. It provides 40 mm bending radius fibre cables

The NORDEN Media Converters were specifically designed tooffer network designers the tools for migration from copperbased Gigabit to fiber based Gigabit Ethernet. Now, migrationor expansion of existing networks can be achieved withminimum cost and complexity. The converters are completelytransparent when installed so the network performs exactlythe way it would do normally-only now, it can migrate bothcopper and fiber mediums. This flexibility in cabling allowsnetwork managers to put fiber cables anywhere with in anetwork without changing the arrangement of copper basedGigabit segments. Their compact size allows the converter tobe easily deployed in any narrow desktop location or used inwall-mount installation to save space.

IT operations are crucial to organisation for business continuity. Data centers are the central location for data interchange in IT operation of organisations and networked server farms. Ribbon fiber cables, array-based fiber connectors, and packaged breakout assemblies provide modular small form factor connectivity and enable fast, reliable interconnection of fiber optic links in high-density data center environments. Higher bandwidth requirement for 10G/40G/100G parallel optics, requirement to reduce cable size for better air flow, structured zone approach, reduction in rack space, higher density of servers and ports and reduction in installation time has brought in requirement for factory terminated high density cabling solutions. Factory terminated cable systems reduce installation time and offers scalable design and implementation.

MTP High density solution.

Norden MTP high density cabling solutions utilizes MPO (multi fiber push on) ferrule providing connection of 12 or 24 fibers. MTP provides superior physical and optical characteristics than standard MPO for precision alignment with spring loaded mechanism and guide pins. They have a removable adaptor that mates female connectors to a male connector with specially designed guide pins for orientation and maintaining polarity along the channel. The Micro-core cables used in factory terminated MTP fiber cable assemblies give 65% reduction in cable size from traditional fiber cables. Pre-connected MTP solution with 24 core LC duplex adapters offers 72 LC terminations in 1U rack space and 288 LC terminations in 4U rack space using modular patch panels.

High Density Fiber Optic Patch Panel

MTP Patch Panels are scalable modular which are designed for high density Gigabit Ethernet Applications. They are used for terminating backbone cables at the Main Distribution Area (MDA) and Horizontal Distribution Area (HDA). MTP Patch Panels are available with 1U and 4U, suitable for standard 19 racks. 1U MTP Patch Panel can accommodate up to three MTP Cassettes, giving a high connectivity of 72 LC fiber terminations in it. 4U MTP Patch Panel can accommodate up to 12 MTP Cassettes, resulting in a maximum of 288 LC terminations per panel.

Understanding Polarity:

The TIA-568-C.0 standard provides Parallel transmission fiber polarity guidance for systems using MPO optical connectivity. The TIA-568-C.0 standard includes guidance on three methods identified as Method A, Method B and Method C. Pre-connect MTP Solution standardizes its products on Method A for both the multimode and single mode fiber systems. This is the most flexible and reliable method . simple to install, operate and maintain. Method A has the most flexible and reliable method for the following reasons:Customers expect systems based on standards. Standards incorporate best practices and incorporate paths to upgrade as technology advances, so system investments are better protected from risk of obsolescence.Customers need flexibility. Method A provides the most flexible options for current system designs and includes an easy path to migrate to higher data rates via parallel optics.

Method A

Method A employs Key Up to Key Down Adapters to link straight-through Key Up to Key Down ribbon cables to fiber cassettes (see Figure ). This method maintains registration of Fiber 1 throughout the permanent link: Fiber 1 in the near-end cassette mates to Fiber 1 in the ribbon cable assembly, which mates to Fiber 1 in the remote cassette. The fiber circuit is completed by utilizing one flipped patch cord, either at the beginning or end of the permanent link, to move Fiber 1 into the Fiber 2 position at the face of the remote cassette to ensure proper Tx-Rx orientation.

MTP Fiber Optic Solution includes:

MTP Cassette, 12 or 24 SC, LC PortsMTP Trunk CableMTP Fan-out Hydra Cable with LC or SC ConnectorsModular Patch Panel

MTP Connectors type:

MTP MM MT Elite Multimode MT FerruleMTP Standard Multimode MT FerruleMTP SM MT Elite Single-mode MT FerruleMTP Standard Single-mode MT Ferrule

LC to MTP and SC to MTP Fiber modules provide a quick and efficient way to deploy up to 24 LC or 12 SC fiber ports in a single module. These factory terminated and tested ports are protected within the housing for reliably high performance and simply connected via 12-strand MTP ports. Modules are available in OM3 , OM4 & SM fibre .Modular fiber cassettes are enclosed units that contain 12 or 24fiber factory terminated fan-outs inside.These cassettes serve to transition small diameter ribbon cables terminated with a MTP connector to the more common LC or SC interface used on the transceiver terminal equipment.The fan-outs typically incorporate SC, LC connectors plugged into adapters on the front side of the cassette and a MTP connector plugged into a MTP adapter mounted at the rear of the cassette.One or more MTP fan-out assemblies may be installed inside the cassette to connect up to two 12-fiber ribbon cables for a total of 24 fibers. Alignment pins are pre-installed in the MTP connector located inside the cassette

MTP adapters provide quick connection for up to 24 optical fibers. Connection integrity is provided by adapter latches which are locked into place by a spring loaded sliding mechanism on the MTP connector plug. Precision alignment is achieved with patented MTP connector guide pins combined with the tightly controlled guide pin holes on MT ferrules. Numerous single port and ganged configurations are available to satisfy a variety of applications. MTP adapters are fully compliant with IEC Standard 61754-7 and TIA 604- 5 Type MPO.

Pre-connector MTP Trunk Cable Assemblies are made up of 12, 24, 48 fiber LSOH jacketed micro cables terminated at both ends with MTP Connectors (without pins). These are used as backbone or horizontal cable interconnections . These plug and play solutions with micro core cable maximize bend radius and minimize cable weight and size. MTP Trunk Cable are factory pre-terminated, tested and packed along with the test reports. These assemblies are available in OM3, OM4 and SM fiber. Standard lengths of 5, 10, 25 meters are available. Custom lengths are also available on request. The MTP Trunk cables are packed as coils in lengths up to 50m long and on reels . OM3 and OM4 cables are available in aqua and SM cables are in yellow color.

Pre-connector MTP Fan-Out Hydra Cable Assemblies are designed for high density applications which require high performance and speedy installation without onsite termination. MTP Fan-Out Hydra Cable Assembly is made up of 12 LSOH jacketed cable terminated at one end in MTP connectors, through a bifurcation unit, to SC or LC connectors terminated on 2mm OD simplex cables. These are used to connect equipment in racks to MTP terminated backbone cables. MTP fan-out cables are numbered for full traceability.Available in 12 core configuration, these space saving assemblies comes with either MTP Male or MTP Female Connectors on one end and LC or SC Connectors on the other end. They are available in OM3, OM4 or SM fiber in lengths of 5, 10, 25 meters, custom lengths are available on request.

Non metallic FRP strength members in the cable give it good tensile strength and electro- magnetic protection. It has small diameter, light weight and thicker wall PE protection, giving it versatile applications. It can be used in cable assemblies, external distribution and transmission, places of high electro-magnetic interferences. Single jelly compound filled loose tube containing up to 12 fibres. PE sheath protects cable from ultraviolet radiation and heat, so can be used for external applications. The cable is suitable for ducts and aerial applications for service drop cable, building interconnection in campus LAN, distribution and trunk cables.

These cables are constructed with a multiple tube filled with water blocking jelly giving very high fibre count up to 144 fibre stranded fibre optic cable, they form the backbone of high speed networks. They give flexibility and versatility to networks. Metallic / Non metallic FRP strength members in the cable give it good tensile strength, A corrugated steel armouring give this cable excellent tensile strength, mechanical & rodent.This cable having special insulation of Flame Retardant PE which can give more resistance from fire. So it can be preferrable for Oil field , building interconnections, trunk lines, LAN and distribution networks.

NORDEN digital temperature unit adjust inner cabinets temperatureby intelligent control through fan unit.Simple structure ensure easy installation and cabling operation with2 way output.

The Easycab range of recessed type wall mount cabinets designed for home/office environment. The cabinets structure is welded and painted with electro static powder coated finish. Easycab is available in 12U size and comply with ANSI/EIA RS-310-D, DIN41497 part 1, IEC 297-2, DIN41497 part 7, GB/T3047, 2-92 standards.

The N-17800A remote paging console is connected with N-11800A through universal industrial standard CAT 5 for zone announcement or communication at a remote and different location from the control centre. Each controller provides four RJ45 ports for the remote paging console. The CAT 5 wiring is not only featured of cost-effective, convenient layout, but also integration of RS 485 communication and audio transmission together. Extra DC 24V power supply. Eight zone selector with state indication. Talk and all zone paging swift keys are provided. 2 and 4 tones chimes with selector and off switch. Volume controls are provided for chime and microphone. Full indications includes individual zone, all zone, busy, paging, power, output level to provide a direct visualization.

The basic Public Address Mixer Amplifiers have power ratings from 60W, 120W, 240W, 350W, 500W to 650W. They are featured of 3 balanced microphone inputs, 2 aux inputs and 1 EMC input. Priority muting is achieved via EMC for overriding other inputs except Mic1 on front panel. Individual gain controls are provided for Mic 1-3 and Aux 1-2, bass and treble controls and master volume control are provided for overall tone control. 70V, 100V and low impedance 4-16ohms speaker outputs are provided. Extensive protection from short-circuit, overload and high temp.