Post Buy Requirement
PE
Dubai, United Arab Emirates
Add Review

Our Products

PCB EXPOSURE UNIT

Independently switched upper & lower light tubes for exposure of single/double sided PCB's Built-in vacuum pump allowing the user to freeze the PCB's in place for perfect alignment to artwork An adjustable timer & counter for setting exposure time. - 110V/200Woperation A convenient "re-expose" button for repeat settings when doing multiple PCB's. 6 each 15 watt UV lamps (3 upper/3 lower) - Exposure area: 16" x 9.5"

Manufacturer:Kinsten Electronics Taiwan



The Kinsten UV Exposure Box has a maximum exposure area 230 x 380mm and can be used for single sided, or double sided PCB's.


It includes digital timer & vacuum table.


Three (3) FL-15 tubes top and bottom, ensure high intensity ultra-violet radiation for rapid exposure time. For applications that require more intense UV, Kinsten now offer the KVB30DQ with four (4) lamps per side for 220V regions and KVB30DT with five (5) lamps per side for 110V regions. Due to the size of the ballasts, 240V regions do not yet have a high intensity model.


The dominant UV wavelength is 350400nm and the KVB-30D, while designed for use with Kinsten presensitised PCB, is often suitable for other applications that require transfering an image to a UV sensitive surface. They have been used in other applications including label making and rubber stamp production, although please check suitability first.




  • Independently switched upper & lower light tubes for exposure of single/double sided PCB's

  • Built-in vacuum pump allowing the user to freeze the PCB's in place for perfect alignment to artwork

  • An adjustable timer & counter for setting exposure time. - 110V/200Woperation

  • A convenient "re-expose" button for repeat settings when doing multiple PCB's.

  • 6 each 15 watt UV lamps (3 upper/3 lower) - Exposure area: 16" x 9.5"




Technical Details





Part Number


Item Weight


Product Dimensions


Item model number


Size


Color



KVB-30D
38 pounds
20.1 x 16.1 x 5.9 inches
KVB-30D
full size
black

View Complete Details

Desoldering Pump


8PK-366D : Desoldering Pump

Manufacturer part number:8PK-366D

Manufacturer:Proskit




Features





Specifications





















Material



Suction capability



OAL (mm)



Individual packing



Aluminum



30cm-Hg



163



Blister card





View Complete Details

Hot Air Rework Station


SS-989B SMD Hot Air Rework Station

2 In 1 SMD Hot Air Rework Station AC220240V 700W

Manufacturer part number:SS-989B

Manufacturer:Proskit




Description

2X Lifetime than traditional heater


Heat Fast , 36sec 300 oC By Alumina Ceramic heating element


Smart Microprocessor Accurate temperature controlled


Auto Cooling System Prolongs the service life





Features

2 In 1 rework station to save cost


Closed circuit sensor design


High power, quick warm up times


Individual function start saves energy


LED digital display


Quiet operation & ESD safe design


Auto cool-off process to prolong the life of heating element


Interchangeable and applicable to most of branded hot air nozzles and tips


Silicone Handpiece Cord Wire heat-resistant up to 200oC


AWG 20 (0.5mm2) UL Certified Wires


Soldering iron heater made by Alumina Ceramic




View Complete Details

Power Supply


PE-213802 Power Supply

Manufacturer part number:PE-213802

Manufacturer:Popular Electronics












DC REGULATED POWER SUPPLY
INPUT: AC 230V, OUTPUT: 13.8VDC, 2A.

View Complete Details

EDUCATIONAL FIBRE SPEED OF LIGHT KIT

To conduct the speed of light experiment, first apply 110 VAC power to the oscilloscope and Speed of Light Apparatus, then connect oscilloscope probes to apparatus test points. After calibration, the oscilloscope monitors the reference and delayed pulses, the time delay is measured and the speed of light calculated.

Manufacturer:CIRCUIT SPECIALIST, INC


Do-it-yourself assembly kit for measuring the speed of light with fiber optics


With Industrial Fiber Optics'Speed of Light Apparatus, measuring the speed of light is now easy and quite accurate. Such was not the case for many centuries. The famed Galileo, after he attempted to measure the speed of light with an unlikely arrangement of lanterns and flags on tall towers, decided that light must travel at infinite speed. Later, Armande Fizeau used an elaborate mechanism with mirrors, lens and a huge rotating cogwheel to determine if the speed of light was, in fact, not infinite. He got close. After many years we now know light does not travel at infinite speed, but rather 299, 792.4562 meters per second in a vacuum.


With the proper combination of electronics, electro-optics and fiber optics this once-difficult measurement is simple and can be conducted in any lab or classroom. All that's needed is a 60 x 100cm table, 110 VAC electrical power, oscilloscope and theSpeed of Light Apparatus.

NOTE:This kit needs assembly before conduction experiments. Easy-to-follow assembly instructions are included with the kit. Some experience with using an oscilloscope and soldering is suggested for completion.


To conduct the speed of light experiment, first apply 110 VAC power to the oscilloscope andSpeed of Light Apparatus, then connect oscilloscope probes to apparatus test points. After calibration, the oscilloscope monitors the reference and delayed pulses, the time delay is measured and the speed of light calculated.

An integral part of theSpeed of Light Apparatusis an easily understood full-color, often lighthearted manual. It begins by tracing the early steps of technical pioneers in their quest to understand light. The manual also includes detailed step-by-step set-up and measurement instructions and examples with equations for calculating the speed of light.


Features:


  • All solid-state transmitter/receiver design

  • Low-voltage electronics operation

  • Fiber optic delay requires no opitcal alignment

  • Safe, visible LED light source

  • Quick set-up and measurement

  • Impact-resistant, protective enclosure

  • Rubber feet on chassis bottom for adhesion on smooth surfaces

  • Contained light beam is ideal for small areas

  • 28-page full-color manual with step-by-step assembly, operation instructions and sample oscilloscope displays


The apparatus consists of an electronics circuit board in protective plastic enclosure; two fiber optic cables; test connections for all outputs and a 110 VAC-to-DC power adapter.


View Complete Details

CONNECTORS AND ADAPTORS


CVP1707D: F JACK, CHASSIS MONUT

Manufacturer:Countryman Enterprise Co Ltd
View Complete Details

Arduino Boards

Technical specs





































































Microcontroller ATmega2560
Operating Voltage 5V
Input Voltage (recommended) 7-12V
Input Voltage (limit) 6-20V
Digital I/O Pins 54 (of which 15 provide PWM output)
Analog Input Pins 16
DC Current per I/O Pin 20 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 256 KB of which 8 KB used by bootloader
SRAM 8 KB
EEPROM 4 KB
Clock Speed 16 MHz
LED_BUILTIN 13
Length 101.52 mm
Width 53.3 mm
Weight 37 g

View Complete Details

Pcb Cutter


DM 525 25 Shear

Two bench top shears suitable for cutting printed circuit board laminates, thin metal sheet and aluminium (1.5/2.0mm) or plastic labels / front panel materials. On lowering the operating handle, a spring loaded clamp is activated which holds the material securely during cutting, thus enabling cuts to be made with a mini-mum of effort. These shears are composed of an epoxy powder coated cast aluminium frame fitted with hardened and ground steel blades.

Manufacturer:MEGA Electronics

Two bench top shears suitable for cutting printed circuit board laminates, thin metal sheet and aluminium (1.5/2.0mm) or plastic labels / front panel materials. On lowering the operating handle, a spring loaded clamp is activated which holds the material securely during cutting, thus enabling cuts to be made with a mini-mum of effort. These shears are composed of an epoxy powder coated cast aluminium frame fitted with hardened and ground steel blades.
View Complete Details

SINGLE CORE EQUIPMENT WIRE


PE-0300: BLACK

Manufacturer:Popular Electronics


1/0.60mmTinned


+PVC 0.D 1.25mm


View Complete Details

ELENCO KITS TELEPHONE KIT


Telephone Kit



  • The PT-323K / AK-700 is a push button electronic

  • telephone. It is equipped with the following

  • features: Pulse/tone dialing; automatic

  • redial; a ringer turn off switch; 4 neon bulbs

  • for visual indication of telephone ringing;

  • clear see-through case to show the total

  • inner workings of the phone. Sectionalized

  • construction and testing makes assembly

  • easy. Wall mounting cradle included.

  • easy. Wall mounting cradle included.

  • This kit requires soldering.



For ages 12 and up.



WARNING CHOKING HAZARD- Small parts Not for Children under 3 yrs


View Complete Details

Microphone Cable

32/0.10mm bare copper


+PVC I.D 1.4mm x 2C (Red and Black)


+Cotton fill + 86/0.10mm spiral


+Black PVC O.D 6.1mm


(100 M PER REEL)

View Complete Details

DIGITAL VIDEO CABLE


PE-1063: DIGITAL VIDEO CABLE

Manufacturer:Popular Electronics




1/0.63mm bare copper+foam PE I.D


2.9mm+Double sided Aluminium foil


+112/0, 12mm Tinned Braid+light Blue


PVC Jacket O.D 4.65-4.70mm


(100M per Reel)




View Complete Details

PVC INSULATION AUTO CABLES


PE-0115: GREEN

Manufacturer:Popular Electronics


(44/0.30mm) 0.D. 3.5MM.
View Complete Details

COLD FREEZING SPRAY


A-44-200: COLD FREEZING SPRAY 200ml

Manufacturer:DUE-CI



Low Global Warming Potential and non-flammableaerosol, specially developed to locate short circuits and failures in electronic components and to test the trace continuity in PC-boards, or to cool the entire circuit.
Provide heat sink protection for heat sensitive components during desoldering and soldering.
Quickly cools down temperature to -50C.
Dielectric and non flammable.
Safe for use on most materials.
Evaporates totally, without leaving any residue.



  • LOW GLOBAL WARMING POTENTIAL (GWP)

  • 100% NON FLAMMABLE

  • OZONE SAFE

  • CFC, HCFC AND HFC FREE

  • SAFE FOR MOST MATERIALS

  • 100% ACTIVE PRODUCT


View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Popular Electronics ( Administrative Office) (Popular Electronics ( Administrative Office))
  • Store 1, M floor, Italia Kitchen showroom, Al Khabeesi Building, Near Abu Baker al Siddique Metro Station, Salahudeen Road, Deira, P.O.Box-10774, Dubai, United Arab Emirates
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/uae/company/popular-electronics-administrative-office/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0006458080{main}( ).../index.php:0
20.01732032952include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.07752754904include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.08353690632header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice