Our Products
Decorative Lights, Lamps & Lamp Shades
2 Products availablePower Connectors
2 Products availableLamps
2 Products availableStreet, Flood & Commercial Lights
1 Products availableClamps And Clamping Equipment
1 Products availablePumps, Pumping Machines & Parts
1 Products availableStudio Flash
1 Products availableFall Protection Devices
1 Products availableLaser Instruments
1 Products availableOur Complete range of products are LED Moving Head, Lighting Console, DMX Lighting Control Dongle, Truss Splitter Light and Blinder Light.
The cutting-edge wireless control system gives Antari W-101 bubble machine a simple setting and operation interface. The Main features being: Intelligent Wireless Control System & Texture-like Painting Finish
Product DescriptionThe cutting-edge wireless control system gives Antari W-101 bubble machine a simple setting and operation interface. The Main features being: Intelligent Wireless Control System & Texture-like Painting Finish.
Each W-101 bubble machine comes with an Intelligent Wireless Control System- a set of wireless receiver and transmitter - as standard controller. The working distance of wireless control is 50 meters in open area.
Europe version : 230 VoltU.K. version : 240 VoltJapan version : 100 Volt
MD-1 is a 60 watts RGBW compact beam moving head with continuous smooth pan and tilt movement ideal for any small entertainment application.
Product DescriptionMD-1 is a 60 watts RGBW compact beam moving head with continuous smooth pan and tilt movement ideal for any small entertainment application.
SOURCE
OPTICAL SYSTEM
CONTROL & PROGRAMMING
ELECTRICAL
CONNECTIONS
Sparkly Wash 37 is a 3715 Watts LEDs RGBW Zoom Wash moving head with RGBW color mixing, a wide zoom range of 7 to 40 angle, 4-zone control, and pre-programmed effects. It is the ultimate versatile LED wash moving head for static & dynamic effects.
Product DescriptionSparkly Wash 37 is a 37x15 Watts LEDs RGBW Zoom Wash moving head with RGBW color mixing, a wide zoom range of 7 to 40 angle, 4-zone control, and pre-programmed effects. It is the ultimate versatile LED wash moving head for static & dynamic effects.
SOURCE:
OPTICAL SYSTEM
DYNAMIC EFFECTS
CONTROL & PROGRAMMING
MOVEMENT
ELECTRICAL CONNECTIONS
The SIRIUS HRI 190W is a metal halide lamp, ideal for small and lightweight fixtures
Product DescriptionThe SIRIUS HRI 190W is a metal halide lamp, ideal for small and lightweight fixtures
Product benefits
Areas of application
T29 theatre lamps are mains voltage Halogen lamps that operate at a high color temperature of 3200 Kelvin that makes them ideally designed for stage and studio lighting.
Product DescriptionT29 theatre lamps are mains voltage Halogen lamps that operate at a high color temperature of 3200 Kelvin - that makes them ideally designed for stage and studio lighting.
BAT-606 is a 610 watts, RGBWA+UV LED battery par. It is operated with an intelligent wireless DMX. It is designed with an adjustable base for accurate angling when installed. This lighting fixture is great for portable applications and for live events.
Product DescriptionBAT-606 is a 6x10 watts, RGBWA+UV LED battery par. It is operated with an intelligent wireless DMX. It is designed with an adjustable base for accurate angling when installed. This lighting fixture is great for portable applications and for live events.
Set of 6 in one flight case available including charger.
SOURCE
Dynamic Effects
CONTROL & PROGRAMMING
ELECTRICAL
Avolites Titan Mobile binds the awesome power of Titan software with a compact and lightweight unit that connects to your laptop to produce a fully featured moving light control system.
Product DescriptionAvolites Titan Mobile binds the awesome power of Titan software with a compact and lightweight unit that connects to your laptop to produce a fully featured moving light control system. Small enough to carry hand luggage on flights large enough for complex shows, transferable shows to and from any other Titan based console.
Live Playbacks, Solo and Flash buttons, user programmable buttons and Attribute controllers enable fast and accurate show programming in a flight friendly package.
The Avolites Arena is the ideal desk for festivals, theatres and anywhere that a larger control surface is required.
The Avolites Arena is the ideal desk for festivals, theaters and anywhere that a larger control surface is required. It combines the popular interface of the Tiger Touch II with more live control than ever before.Alongside the vibrant main display, a second touch screen provides an additional workspace window, also labeling the adjacent macro buttons and rotary pots. These fully assignable playback encoder pots, allow intuitive control of channels and effects. The six LCD screens display electronic legends for 30 faders, for speedy access to all your playbacks, fixtures and palettes. A brand new optical output means the Arena is equipped for fibre connections, with no signal loss over long distances, from front of house to the stage essential in large and outdoor venues.Offering seamless Multi User compatibility, the Arena can be used as master, back-up or extra programming surface, considerably cutting your programming time by allowing multiple Titan programmers to work simultaneously, before the main console takes charge.
Product features
Fast and intuitive control of intelligent lighting, dimmers and LED effects from one on screen console. TheDMX USB Dongle allows the user to output one line of DMX with the full functionality of Avolites Titan Software.
Fast and Intuitive control of intelligent lighting, dimmers and LED effects from one on screen console.Titan One DMX USB Dongle allows the user to output one line of DMX with the full functionality of Avolites Titan Software.Access powerful features such as Pixelmapper, Quicksketch, Media Clip Select, Attribute Control-Blades and ShapeGenerator. Titan One allows you unlimited usage which gives you uninterrupted programming and playback time.
Product features
The device operates from any AC mains voltage ( 85 to 265v ) with a robust 2 amp internal power supply.
The device operates from any AC mains voltage ( 85 to 265v ) with a robust 2 amp internal power supply. Standard units have DMX in, DMX loop out, Terminate On switch and LED, plus additional Power and Data LED's.
The Truss splitter has three pairs. These are optically isolated from each other and can be standard 5 pin or 3 pin or 3 pin reverse. Internally, the circuit board carries spare IC's enabling you to get up-and-running again very fast in the case of an emergency.
The reliable and resilient principals of Tube Technology are utilised by Avolites in the Truss Mounting DMX splitter. Cased in a thick-wall, rigid plastic tube, the splitter is designed to attach to anything. The use of two heavy duty velcro straps means the Truss Mounting splitter needs no special clamps or other fixings. In addition to the velcro, there is a safety wire and clip.
Product features
The SharXS HTI is a Metal halide, double-ended700W/D4/75 SFc10-4 Discharge Lamp.
The SharXS HTI is a Metal halide, double-ended700W/D4/75 SFc10-4 Discharge Lamp.
Electrical data
Photometrical data
Safety adviceBecause of their high luminance, UV radiation and high internal pressure during operation, Baby SharXS HTI, SharXS HTI and Maxi SharXS HTI lamps may only be operated in enclosed lamp casings specially constructed for the purpose. Appropriate filters must ensure that UV radiation is reduced to an acceptable level. Mercury is released if the lamp breaks. Special safety precautions must be taken. Information on safety and handling is available on request or can be found in the leaflet included with the lamp or in the operating instructions.
The SD6 is specifically designed for 230 / 240 volt dimming markets, the SD6 digital dimmer pack offers user-friendly controls in a portable, rack mount package.
Product DescriptionThe SD6 is specifically designed for 230 / 240 volt dimming markets, the SD6 digital dimmer pack offers user-friendly controls in a portable, rack mount package.
The SD6 digital dimmer pack contains six 13 Amp (2.5kW) 230/240 volt dimmers. Each dimmer can be configured directly from the unit's on-board LCD menu for dimming or non-dim operation, minimum / maximum output levels, dimming curves, and more.
TheDMX splitters will buffer, multiply, isolate and protect console DMX outputs.
TheDMX splitters will buffer, multiply, isolate and protect console DMX outputs.The device operates from any AC mains voltage ( 85 to 265v ) with a robust 2 amp internal power supply. Standard units have DMX in, DMX loop out, Terminate On switch and LED, plus additional Power and Data LED's.
The rack splitter design has changed to be compatible with the ART series dimming system DMX splitters. There are now two off, 1 in to loop out and 4 isolated DMX outputs.
Product features
The Famous P-364 is acompact and light-weight lighting fixture with uniform and widespread high-power illumination field for any application.
Product DescriptionThe Famous P-364 blinder is acompact and light-weight lighting fixture with uniform and widespread high-power illumination field for any application
Product features
LED strips with high brightness output ideal for all indoor and outdoor application with an IP67 rate. Highly flexible material, enabling to be applied on all accessible surfaces.
Product DescriptionLED strips with high brightness output ideal for all indoor and outdoor application with an IP67 rating. Built from highly flexible material, enabling it to be applied on all accessible surfaces.
Features:
Applications:
| Parameter | Symbol | Values | Unit |
| Emitted color | RGB tri-color / | ||
| Dominant Wavelength Typ. | d | R: 625 | nm |
| G: 525 | nm | ||
| B: 470 | nm | ||
| PCB(White/Brown) | Reel | Length: 5 | m |
| Width:1 | cm | ||
| Thickn:2 | nm | ||
| Luminous flux Typ. | G: 525 | nm | |
| B: 470 | nm | ||
| B: 9 | lm | ||
| Viewing Angle (Per LED) Typ. | 2 1/2 | 120 | |
| LED Quantity | Qty | 60pcs | M |
| Operating voltage (DC) | Vopr | 24 | v |
| Each Chip Voltage Max. | R: 2.0 | V | |
| G: 3.2 | V | ||
| B: 3.2 | V | ||
| Operating Temperature Topr | -25 TO +60 | ||
| Storage Temperature TsTg | -25 TO +85 |
The 2 models of vertical LED tubes, PX-VT 100-1664 (1m) and PX-VT-100-00832 (0.5)isideal foranyindoor/outdoor venue.
The vertical LED tubes by LED studios offer 2 models: PX-VT 100-1664 (1m) and PX-VT-100-00832 (0.5).They are ideal for clubs, pubs, stages, TV studios, building facades, landscapes and indoor/outdoor entertainment venues. Its high brightness SMD5050 LEDs can withstand any environment because of its waterproof features.
Product features
A complete Dimming, Mains and Data Distribution Solution in one box.
A complete Dimming, Mains and Data Distribution Solution in one box.
The compact box with proven Art 2000 technology is quick to set up. It boasts 12 dimmer circuits 10amp each, 6 combined dimmer and fixed mains.
Product features
The DAS HQ-112.95 is designed for medium to large scale installations such as arenas, auditoriums, stadiums and theaters. The HQ models offer tightly controlled coverage patterns and high output capabilities being usable individually, or in multiple unit arrays. The series enclosures incorporate cutting-edge interior and exterior coatings for weather resistance and extended durability in extreme environments.
The Capture-KMC20 is the smallest line array microphone in the market featuring PAT technology composed of 8 x4mm cardioid capsules aligned in a line array configuration.
Product DescriptionTrue line array characteristics with PAT technologyWide horizontal cardioid polar pattern and narrow vertical polar patternRuthenium-plated brassHorizontal and vertical models
The Capture-KMC20 is the smallest line array microphone in the market featuring PAT technology composed of 8 x4mm cardioid capsules aligned in a line array configuration.
Given its line array characteristics, the Capture shows a minimal variation of gain with distance. As a result, the distance between the orator and the microphone is not crucial and he is able to move towards or away from the mic freely without strongly affecting the volume or audio quality.
Available in two models for vertical and horizontal setup, the polar response is cardioid in the horizontal plane and very narrow in the vertical plane.
And given its thickness of 6mm, these incredibly thin microphones are impressively discreet and made with durable premium materials like brass for use in a variety of applications in conference halls, boardrooms, houses of worship and TV studios.
The K-array KK52 is a passive speaker system comprised of eight 2 neodymium magnet transducers housed in an elegant and sturdy stainless steel chassis.
Product DescriptionThe K-array KK52 is a passive speaker system comprised of eight 2 neodymium magnet transducers housed in an elegant and sturdy stainless steel chassis. The vertical dispersion pattern can be switched for wide or narrow coverage, allowing for a great variety of applications. The eight closely spaced cone drivers provide true line array characteristics - phase coherence, low distortion and focused listening in both the near field and at a distance from the speaker. A variety of rigging accessories provides many linking and hanging options for the KK52 (0.5 meter) and the larger (1 meter) KK102 to be combined in vertical and horizontal line array configurations to satisfy many different venue requirements during temporary events and for permanent installations.
Product features
Applications
The SF-26employs twin 6P woofers for low frequency reproduction. The M-34 compression driver provides brilliant highs. The birch plywood cabinet construction offers an ultra-compact design which is available in black or white. Precise coverage and control in either the horizontal and vertical position is possible thanks to the symmetrical 80 horn geometry. The cabinets can be permanently installed by way of the optional U brackets and accessories which allow for multiple configurations. Four threaded fixing points for the AXW-1 adjustable wall mount and stand mounting accessories augment adaptability. A robust steel grille internally lined with acoustically transparent filter cloth protects components.
Product features
The D-20 amplifier offers greater output power than the D-10. Its modern Class AB bipolar design delivering the cleanest sound available coupled with ultra-high standards of reliability.
FEATURES
- Stereo Amplifier2100 W+ 2100 W at 2 ohmClass AB bipolar topologyStereo/Bridged/Parallel Operation
The D-20 amplifier offers greater output power than the D-10. Its modern Class AB bipolar design delivering the cleanest sound available coupled with ultra-high standards of reliability. Capable of handling 2-ohm loads, the D-20 control and protection circuitry continuously checks for fault conditions including shorted outputs, DC on outputs, excessive temperature, and component failure. If such an event occurs the outputs are disconnected, saving expensive driver repair bills.
The D-20s sophisticated side chain limiters prevent distortion and speaker damage but are out-of-circuit until the onset of clipping. The control circuitry provides full protection against inrush current limiting with delayed turn-on. Low noise vari-speed fans are utilized to minimize mechanical noise, making the T Series an ideal choice for theaters, auditoriums.
CS1-Scon25 HD/FD Bold on Connector M12.
The screw in half connectors (Scons) in FD and XD System which are being used on all kind of plated products like totem, adapter plates, book corners and the swivel corner / base. Both Scons have a M12 Thread inside.
Bold on Receivers
Eurotruss supplies various kinds of bold on receivers. The screw in bold on receivers (connectors) in FD and XD System which are being used on all kind of plated products like totem, adapter plates and the swivel corner / base. The other bold on receivers are to be used on corner blocks to make the various attachments.
The CS1-TP + CS1-RS2 Trusspin + R-Clip 2mm are a truss pin and clip connectors for HD/FD truss systems, made accordingly the highest quality standard.
The CS1-TP + CS1-RS2 - Trusspin + R-Clip 2mm are a truss pin and clip connectors for HD/FD truss systems, made accordingly the highest quality standard. Eurotruss only uses the aluminium quality EN AW-6082 T6 for the connectors. All Eurotruss connectors are engraved with the Eurotruss logo and name to check the originality.
Polyester round slings used when materials like chain, wire rope could damage the load.
Product DescriptionPolyester round slings are used for lifting and rigging when abrasive materials such as chains or wire rope could damage the load.
Facts
Manual chain hoists from 250 kg. up to 1000 kg. A very successful hand hoist produced withthe latest technology. Very light and provides great handling due tothe compact design.
Product DescriptionManual chain hoists from 250 kg. up to 1000 kg. A very successful hand hoist produced withthe latest technology. Very light and provides great handling due tothe compact design.
Facts
Technical Specifications
| EH-MH-250-6 | 250 kg. / 550 lbs. - 6 m. / 20 ft |
| EH-MH-250-8 | 250 kg. / 550 lbs. - 8 m. / 26 ft |
| EH-MH-250-10 | 250 kg. / 550 lbs. - 10 m. / 33 ft |
| EH-MH-500-6 | 500 kg. / 1100 lbs. - 6 m. / 20 ft |
| EH-MH-500-8 | 500 kg. / 1100 lbs. - 8 m. / 26 ft |
| EH-MH-500-10 | 500 kg. / 1100 lbs. - 10 m. / 33 ft |
| EH-MH-BAG-170 | Chain Bag for 250 & 500 kg. |
| EH-MH-1000-6 | 1000 kg. / 2200 lbs. - 6 m. / 20 ft |
| EH-MH-1000-8 | 1000 kg. / 2200 lbs. - 8 m. / 26 ft |
| EH-MH-1000-10 | 1000 kg. / 2200 lbs. - 10 m. / 33 ft |
| EH-MH-BAG-225 | Chain Bag for 1000 kg. |
Polyester round slings equipped with a steel wire rope instead of the regular polyester lining.Soft steel lined round slings are used for lifting and rigging when abrasive materials such as chains or wire rope could damage the load.
Polyester round slings equipped with a steel wire rope instead of the regular polyester lining. Soft steel lined round slings are used for lifting and rigging when abrasive materials such as chains or wire rope could damage the load.
When installed, it does not need any additional safety device.The MODE FACTOR, i.e. the way a round sling is used, should always be considered when calculating rigging capacities. For this reason and owing to their susceptibility to shear, round slings have a coefficient of 7 (EN 1492-2).
TechnicalSpecifications
| ESER01-01SK | 1000 kg. WLL - length 0, 5 m. |
| ESER01-02SK | 1000 kg. WLL - length 1 m. |
| ESER01-03SK | 1000 kg. WLL - length 1, 5 m. |
| ESER02-01SK | 2000 kg. WLL - length 0, 5 m. |
| ESER02-01SK | 2000 kg. WLL - length 1, 0 m. |
| ESER02-01SK | 2000 kg. WLL - length 1, 5 m. |
| ESER02-01SK | 2000 kg. WLL - length 2, 0 m. |
| ESER02-01SK | 2000 kg. WLL - length 2, 5 m. |
| ESER02-01SK | 2000 kg. WLL - length 3, 0 m. |
A beam clamp is a simple and safe temporary anchor point. Ideal for quick attachment of loads using threaded spindle. The clamp can be installed by twisting the spindle, placed over the flange and closed tightly.
Product DescriptionA beam clamp is a simple and safe temporary anchor point. Ideal for quick attachment of loads using a threaded spindle. The clamp can be installed by twisting the spindle, placed over the flange and closed tightly.
Facts
Product Codes & Description
| Product code | Capacity | Flange width |
| ELBC010 | 1000 kg. WLL | 75 - 230 mm. |
| ELBC020 | 2000 kg. WLL | 75 - 230 mm. |
| ELBC030 | 3000 kg. WLL | 80 - 322 mm. |
| ELBC050 | 5000 kg. WLL | 90 - 322 mm. |
| ELBC100 | 10000 kg. WLL | 90 - 322 mm. |
High safety adjustable belt, chest, shoulder and leg straps harness usedto hold a person to prevent falling or injury
Product DescriptionHigh safety adjustable belt, chest, shoulder and leg straps harness usedto hold a person to prevent falling or injury.
Safety Harness P-81
Safety Harness P-71E
Safety Harness P-51E
Eller steel; with steel kernel; oversized thimble; Available from 0, 5 till 6m, regular or PVC tubed.
Product DescriptionEller steel; with steel kernel; oversized thimble; Available from 0, 5 till 6m, regular or PVC tubed.
Steels are according to NEN-EN 12385-4 and color coding isreferring to the length (ARGH)Flexible wire rope slings (construction 6x19+FC and 6x36WS+FC)Available in WLL 1t (d=10mm) en 2t (d=14mm) with or without PVC tubeEnds with thimble and clamped with a tapered taluritTapered talurit with inspection eye1t version with oversized thimble fi ts a 3, 25t bowshackle, 2t fi ts a 4, 75t bow-shackle
Touch control rigging gloves, with half fingers. Abrasionresistant for better grip & handling
Touch control rigging gloves, with half fingers. Abrasionresistant for better grip & handling
Swivel Clamp with 50 mm width and 500 kg loading capacity
M12 Eyelet bolt & flat washer &Wing nut Swivel, moving freely in 360 degrees, easily fixing in 90 or 180 degrees by an extra pin. Natural Polish
Horizontal bar for lighting
This horizontal bar can be placed on top of the TL-038/053 or TL-065 to support up to 6 Spotlights
FLS-060 is the Front Loader Sound Serieslifting up to a 400 kg load at a height of 6 m
Product DescriptionFLS-060 is the Front Loader Sound Serieslifting up to a 400 kg load at a height of 6 m
| Work surface: 2.40 x 2.00 m (7.9 x 6.6) |
| Weight: 199 kg (437 lb) |
| Winch: 1150 kg certified |
| Cable: Steel DIN 3060. Tensile strength 180 kg/mm2. Anti-torsion & anti-corrosion 6 mm cable diameter. |
| Construction material: Alluminium profiles 6082T6. |
| Antirust protection priming paint bathed black steel, covered with cured polyester dust. |
| Automatic Eurotruss Trigger (AET) on each section which automatically slots into the sections during elevation, locking them in place. |
| Anchor of the legs by safety catches. |
| Adjustable stabilizer plates in the legs with nonslip rubber base support. |
| Spirit level for vertical alignment. |
| Swivel wheels for transporting the lifter to its working position |
TL-053 is a Telescopic lifter of the Top Load Series lifting up to a 125 kg load at a height of 5, 35 m
Product DescriptionTL-053 is a Telescopic lifter of the Top Load Series lifting up to a 125 kg load at a height of 5, 35 m
| Cable: Steel DIN 3060. Tensile strength 180 kg/mm2. Anti-torsion & anti-corrosion 4 mm cable diameter. |
| Construction material: Steel profiles EN 10305. |
| Antirust protection priming paint bathed black steel, covered with cured polyester dust. |
| Four-profile telescopic system operated by steel cable driven by pulleys with metal |
| protected bearing pads. Adaptor 35 mm. |
| Automatic Eurotruss Trigger (AET) on each section which automatically slots in to the sections during elevation, locking them in place. |
| Anchor of the legs by safety catches. |
| Adjustable stabilizer plates in the legs with nonslip rubber base support. |
| Spirit level for vertical alignment. |
| Swivel wheels for transporting the lifter to its working position. |
SPSdjustable stairs thatensure quick and smooth assembly, made of heavy-duty steel sections.
Product DescriptionAdjustable stairs thatensure quick and smooth assembly. They are made of heavy-duty steel sections. The stairs steps are filled with anti-slip plywood.
| Product Code | SPS 01 / 7 | SPS 01 / 6 | SPS 01 / 5 |
| H min (mm) | 1000 | 800 | 600 |
| H max (mm) | 1800 | 1400 | 1000 |
| Dimensions (mm) | 2645 | 2335 | 2025 |
| Weight (kg) | 77 | 67 | 59 |
The PR10 Roof is a tower based structure with a pitched roof. This pitched roof has a standard cantileverand a special PA frame at the sleeve blocks of the front towers which can carry a PA Load of 3.000 kg eachand is a working platform to slide in the outer keder canopy.
Product DescriptionThe Pitch Roofs are designed to be integrated in any kind of steel scaffolding stage. The wall keders can be hooked on theside of the scaffolding stage and have a double slit canopy so the lower part can be pulled up for maximum entrance space.
This roof meets all the required international standards set by light & stage designers of concerts and events.Naturally PA Wings, Side Houses and Loading Docks are available by extending the roof.The PR10 Roof consist of a TT Ground Support on six TD44 Towers anda Roof Structure of special tent profiles with integrated keder profiles.The PR10 Roof is a tower based structure with a pitched roof. This pitched roof has a standard cantileverand a special PA frame at the sleeve blocks of the front towers which can carry a PA Load of 3.000 kg eachand is a working platform to slide in the outer keder canopy. This is a result of the fact that the towersare positioned under the roof structure in order to have a fully closed roof top.The special tent profiles make it possible to build the roof in various configurationsas each canopy keder frame has the same size as the TT truss sections.
Size:20x15m
Size:24x15m
The PH6 is a 6mm pixel pitch 480x480mm indoor die-casting aluminum LED display.
Product DescriptionThe PH6 is a 6mm pixel pitch 480x480mm indoor die-casting aluminum LED display.
Product features
Module features
Cabinet features
Source compatibility(with video processor)AV, DVI, HDMI, SDI, S-Video, DP
DVX602 has 9 video inputs. DVI loop. Preview, Program and LED outputs. 2 3G-SDI inputs(optional).
DVX602 has 9 video inputs. DVI loop. Preview, Program and LED outputs. 2 3G-SDI inputs(optional). Multi-format Program output:3G-SDI/DVI/VGA/VID(optional). Support PIP, POP. Freeze and Black.Preview, Program operate separately. CUT and FADE. up to 4096(H) or 2160(V) input and output9 video inputs
Product features
The DVX802 is a mixing equipment of seamless switcher and video wall processorthatsupports 8 video inputs and 3 outputs, at the same time it can extend one of the video inputs(3G-SDI/DVI/VGA/VID).
The DVX802 is a mixing equipment of seamless switcher and video, wall processor. It support 8 video inputs and 3 outputs, at the same time it can extend one of the video inputs(3G-SDI/DVI/VGA/VID). In seamless switcher mode, DXV802 support preview, program, and LED outputs. It can achieve the dynamic seamless switching among all the channels and LOGO insert. In Video Wall Mode, DVX802 support 3 splicing outputs, the splicing effect is the same as 3 LED video processor, without the external signal distributor. With high performance picture processing, simple and reliable operation, DVX802 is suitable for live portable stage and fixed installation.
Product features
Seamless Switcher Mode
Video Wall Mode
S-500 is a snow effect machine with extremely high output, a blower built into flight case keep the noise level at the minimum, adjustable snowflake size and road case for outdoor operation which provides extra protection
Product DescriptionS-500 is a snow effect machine with extremely high output, a blower built into flight case keep the noise level at the minimum, adjustable snowflake size and road case for outdoor operation which provides extra protection
The S-500 main body and 20-Liter fluid tank are placed inside a road case with wheels.
The nozzle is connected by a 10-Meter long hose and it can be easily rigged on a standard truss or tripod stand. Air and snow fluids are delivered to the nozzle via the 10-Meter hose. Users can adjust the air volume and fluid flow rate to get the right snow effects needed, from fine snow to blizzards.
The functions of S-500L are exactly the same as S-500. The only two differences between S-500L and S-500 are S-500L comes with a 20-Meter hose in a larger case. The L of S-500L stands for Large.
The new M-7 RGBA is the updated version of the original M-7 LED fog machine. Amber LEDs have been added up to M-7 RGBA which allows its color mixing even more attractive. Plus, optional W-DMX function is available on M-7 RGBA.
Product DescriptionThe new M-7 RGBA is the updated version of the original M-7 LED fog machine. Amber LEDs have been added up to M-7 RGBA which allows its color mixing even more attractive. Plus, optional W-DMX function is available on M-7 RGBA.
Feature
Antari F-3 Fazer has a state-of-the-art air pump system mixes fog and air to produce a fine, dry fog with minimal fluid consumption.
Product DescriptionAntari F-3 Fazer has a state-of-the-art air pump system mixes fog and air to produce a fine, dry fog with minimal fluid consumption. For example: one liter of Antaris FLG heavy fog liquid will provide five hours of continuous fogging.
Antari F-3 Fazer integrates the features of a rugged flight case in it's new packable design.
Performance meets reliability:the extremely dry fog output leaves no residue, and no liquid is left inside the heater, achieving a longer life cycle for this critical component.
The F-3 also features built-in DMX functionality and silent operation , making it suitable for the widest variety of theatrical and stage applications.
Voltage :U.S. version : 120 VoltEurope version : 230 VoltU.K. version : 240 VoltJapan version : 100 Volt
FLR Light Fog Liquid
Antari fog liquids optimized for use with all Antari fog machines and are suitable for all models of foggers, they are all water-based composition that leaves no residues. All of the liquid are odorless, non-irritating, non-toxic and non-flammable.
The AC3F is a 3 pin female XLR Audio connector of the Amphenol AC series.
The AC3F is a 3 pin female XLR Audio connector of the Amphenol AC series. The AC series XLR male connector features the unique Australian design and patented "Jaws" cable retention system. The AC series connector can be quickly and easily assembled without screws.
Product features
TheRPC15 is a speaker cable, 42.5, AWG13.
TheRPC15 is a speaker cable - 4x2.5 AWG13designed for amplifier to loudspeaker connections, the RPC cables can really make the difference when maximum power transfer, superior sonic transparency , and mechanical reliability are essential.
Typical Applications : Studio installation, sound reinforcement, distributed speaker systems.
Product features
A 5 pin DMX cable with custom lengths.
A5 pin DMX cable with custom lengths for lighting systems and lighting control applications.
Multicore Power Cable - 50m H07RN-F TITANEX 18x2.5mm rubber cable with 19 Pin connectors
Nexans H07RN-F TITANEX 18G2.5, Industrial flexible rubber cable, 18x2.5mm2 - Made in France
Heavy Duty, Lightweight, with T-Bone connector, for use with pedestrian traffic and low volume vehicular traffic Made in the UK
3 phase 125A, 4 x 19 Pin connector Outputs, 4 x Direct 32A Outputs, 6 x 16A CEE Outputs Components Made in Europe
Product Description3 phase 125A, 4 x 19 Pin connector Outputs, 4 x Direct 32A Outputs, 6 x 16A CEE Outputs - Components Made in Europe
Mini Main power distributor 3 phase19 Flight-case125A:
MDB-125A
Mini Main power distributor 3 phase19 Flight-case 63A
MDB-63A
Mini Main power distributor 3 phase19 Flight-case- Custom
Faiz (Procom)
, Sharjah, United Arab Emirates
Share us via
Write a Review
