Sahara Emirates Trading

United Arab Emirates

HDPE Fittings Injection Moulded, Electro Fusion, Tapping Tee Valve, Saddles, Ranging from 20mm to 1600mm, with International certifications, huge stock in U.A.E., deliveries to all over GCC, K.S.A, Oman, Bahrain, Kuwait, Qatar.Plastitalia High Performance fittings made with PE100 raw materials for water supply, potable water, pressure piping systems, main lines, fire fighting lines, distribution networks from PN6, PN10, PN16, PN20, PN25 and PN40.

Plastitalia manufactures all fittings as per International standards BS EN 12201, FM approved, WRAS approved, etc.

Sahara Emirates has a big list of satisfied customers all over GCC for more than 10 years into HDPE fittings, supplies, fabrication services and installation.

high-density polyethylene pipe (hdpe) can carry potable water, wastewater, slurries, chemicals, hazardeous wastes, and compressed gases. In fact, polyethylene pipe has a long and distinguished history of service to the gas, oil, mining and other industries. It has the lowest repair frequency per mile of pipe per year compared with all other pressure pipe materials used for urban gas distribution.

polyethylene is strong, extremely tough and very durable. Whether youre looking for long service, trouble-free installation, flexibility, resistance to chemicals or a myriad of other features, high-density polyethylene pipe will meet all your requirements.

polyethylene pipes and fittings are inherently tough, resilient and resistant to damage caused by external loads, vibrations, and from pressure surges such as water hammer. Even in cold weather polyethylene pipe is tolerant to handling and bending.

Hot and cold zones, sometimes called melt and freeze zones, are formed after energizing the coil. The length of these zones is particularly important. Each zone ensures that fusion is controlled to a precise length of the socket of the fitting and that the melt pressure is also controlled throughout the entire surface of the socket ensures uniform heat distribution.

The basic fusion parameters: temperature, pressure and time, are controlled by the ECU which is programmed to establish these parameters from the barcode read from the fitting itself. The ECU also provides a permanent record of the procedure followed.

Butt fusion is a thermofusion process which involves the simultaneous heating of the ends of two pipe/fitting components which are to be joined, until a molten state is attained on each contact surface. The two surfaces are then brought together under controlled pressure for a specific cooling time and a homogenous fusion joint is formed. The resultant joint is fully resistant to end loads and has comparable performance under pressure to the pipe itself.An electrical heater plate is used to raise the temperature of the pipe ends to the required fusion temperature. Butt-fusion can be used to join both PE80 and PE100 materials for the pipe sizes of 90mm and above of the same SDR.The butt welding machines used to weld PE pipes have controls to ensure the welding parameters are strictly adhered to. The following parameters are controlled:

• heater plate temperature
• ovality and alignment
• interface pressure
• bead width
• heat soak time
• changeover time

Control of these is necessary to ensure premature failure of the weld does not occur. The field conditions under which PE pipe is welded have a considerable effect on the strength of the joint. In order to achieve an acceptable weld three elements are essential:

• Cleanliness: because contamination will ruin joints
• Technique: Most owners of PE pipe systems require that people performing butt welding of PE pipes are qualified by completing a recognized training course.
• Correctly designed equipment with proper maintenance: Correct welding temperatures, welding procedures and pipe facing tools must be maintained in tolerance and in good condition.

The resulting joint, if it has been properly made, is as strong as the original pipe and can withstand all the loads applied during routine installation and operation.During the fusion process internal and external weld beads are formed. Techniques have been developed to minimize the size of the beads, however as they do not add anything to the overall strength they may be safely removed if required. The removed weld beads can be inspected as part of a quality control programme.

Water meters are used to measure the volume of water used by residential and commercial building that are supplied with water by a public water supply system. Water meters can also be used at the water source, well, or throughout a water system to determine flow through a particular portion of the system. In most of the world water meters measure flow in cubic metres (m3)

There are several types of water meters in common use. The choice depends on the flow measurement method, the type of end user, the required flow rates, and accuracy requirements.There are two common approaches to flow measurement, displacement and velocity, each making use of a variety of technologies. Common displacement designs include piston and disc meters. Velocity-based designs include single- and multi-jet meters and turbine meters.

There are also non-mechanical designs, for example electromagnetic and ultrasonic meters. Most meters in a typical water distribution system are designed to measure cold potable water only. Specialty hot water meters are designed with materials that can withstand higher temperatures. Meters for reclaimed water have special lavender register covers to signify that the water should not be used for drinking.

Additionally, there are electromechanical meters, and Energy Calculation Meters. Mechanical water meters normally use a reed switch, hall or photoelectric coding register as the signal output. After processing by the microcontroller unit (MCU) in the electronic module, the data are transmitted to the LCD or output to an information management system

HUGE PE Inspection Chamber parts are manufactured in compliance with EN 13598-2 standard and are certified by Turkish Standards Institute (TSE). Item No of the products in TR Ministry of Environment and Urban Planning Construction and Installation Analysis.

PPR polymer piping systems have recommended themselves as a very reliable and easy to install replacement for old metal pipes. Providing years of service and quick and easy installation by means of fusion welding, PPR is one of the best solutions so far for indoor hot, cold and drinking water transportation, heating and under-floor heating systems, air conditioning systems in civil and industrial constructions, public and sport facilities.

Sheet Molding Compound (SMC) is a mixture of unsaturated polyester resin with impregnating augmentation material, filling material and glass fiber.

The SMC water tank body (floor, wall and ceiling) is made of bolting type square SMC panels, which are molded under high heat & pressure.

SMC water tanks guarantee sanitation, excellent durability, absolute water tightness, versatile capacity design and easy installation.

SMC water tanks meet the Food Sanitation Act. Bacteria or germ formation and growth are prevented by blocking sunlight transmission completely.

The internal tie-rods in stainless steel are coated with PE by heat-shrink tubing process, which provides stronger corrosion resistance. The external components are hot dip galvanized steel, which gives semi-permanent life.

The foam type gasket with excellent elasticity and resilience assures perfect water tightness.

Various panels make installation of tanks possible in any dimensions or capacities. (L-shape, U=shape, square-shape)

The installation of tank is very user-friendly even in the restricted area by using standardized bolting type panels.

Pre-insulated panels are also available as an option. By using the PU foam insulated panels, the temperature change of the water in the tank can be minimized at high or low environmental temperature.

Permafloor is the innovative outdoor flooring system which allows 100% permeability and drainage. Thanks to its special composition, Permafloor allows water to flow naturally into the ground and prevents the dangerous effects of hydroplaning caused by water remaining on the flooring surface. Permafloors high level of permeability makes it one of very few pavement materials which does not impede the natural cycle of evaporation and penetration of water into the atmosphere and earth.

When combined with an impermeable foundation (cement, bitumen, artificial sheathing), Permafloor guarantees immediate drainage, allowing rainwater to be channeled towards appropriate collection and treatment points before eventually Drainage into the ground, as required in the current standards on rainwater treatment.

Sika provides comprehensive solutions for fire resistant construction such as tunnels, commercial and residential buildings and steel structures especially. Fire resistant mortars, intumescent coatings and specially designed sealants and backing materials enable to build secure buildings.

Sika fire rated sealants, foams and special backing materials comply with the latest relevant standards. Sika solutions can be used for inside and outside applications on various substrates and give you freedom to connect different buildings materials fire proof and enable you to chose your most preferred architectural design without limitation with regard to safety.

We are a Sahara Plast Welding Machine Supplier. We are also reckoned as one of the leading Welding Machine Supplier in UAE. Our products are designed with lot of precision and have in-built protective circuits. The circuits help to prevent low or over voltage, over current, over heat etc. Ours machines are made from PE, PP and PVDF, and can be used in different work conditions. The various functions of the machines can also be changed easily and quickly. The machines provided by us can easily meet the requirements of the customers in various fields such as sewage, fire, chemical, minerals, construction, gas, communication, water supply and aquiculture field etc.
Sahara Plast Welding Machines are manufactured using high quality material. These can be procured from us at market leading prices. We vouch to deliver the order within stipulated time frame. The machines are packed well, so that no deterioration occurs during transit.

The use of banner products is mostly employed for joining plastic pipes and fittings, and are manufactured complying with American Standards. We are an eminent Banner PVC Pipe Cement Supplier. Our products can be used with portable water and in various applications such as construction, irrigation, conduit etc. We offer superior quality Banner Bronze Clear, Banner Silver Clear, and Banner Gold Gray / White at very reasonable prices.
Banner Bronze Clear: These are characterized by “low VOC PVC cement for all classes and schedules with interference fit through 6" (160 mm) diameter, and Schedule 80 through 4" (110 mm) diameter”. The products’ other salient features are fast setting and medium bodies.
Banner Silver Clear: These are heavy bodied and have medium settings. These are also characterized by “low VOC PVC cement for all classes and schedules with interference fit, including Schedule 80 through 6" (160 mm) diameter.”
 Banner Gold Gray / White: These have slow settings and very heavy bodies. These are also characterized by “low VOC PVC cement for all classes and schedules with interference fit, including Schedule 80 through 8" (200 mm) diameter”.

Note : Please Contact Our Sales Representatives for Further Information

Our MNPI Double Wall Corrugated Pipes are approved by various water and sewer authorities. Customers can procure Polypropylene (PP) Double Wall Corrugated Pipes and Corresponding Fittings at highly competitive prices from us. We are one of the leading MNPI Double Wall Corrugated Pipes Suppliers in UAE.

Features

• Our Plastic Pipe Systems have been manufactured well and procured by consumers in Europe and USA from past twenty years.
• The products comply with EN 13476 -1 standard.
• The stiffness of our Plastic Pipe Systems is very high ( SN8 ) and more than GRP pipe system.
• These are also less in weight.
• Our products are also very inexpensive.
• The products provided by us get installed very easily.
• Our products also have push fit joint, and on site welding feature.
• These are also resistant to abrasion.
• These have high temp resistance that is to about 95o C.
• These also feature easy inspection condition– CCTV.
• We also have variety of fittings in variety of sizes- 160mm to 1000mm diam.
• Our Plastic Pipe Systems can be easily connected to plastic manholes and various sewer pipes.

Note : Please Contact Our Sales Representatives for Further Information

Permafloor is an advanced outdoor flooring system. It is known for its good permeability and drainage. It has an excellent composition and lets the water to flow into the ground with ease. The affects caused by remaining water in the flooring surface can be dangerous. Our product aids in preventing any unwanted hydroplaning affects. As aforementioned, it also has high level of permeability, so it is deemed as a material that does not disrupt the natural cycle of water evaporation and penetration into the earth and atmosphere.
Our Permafloors can be installed along with impermeable foundation such as artificial sheathing, cement, bitumen etc. When installed in such a way these still ensure quick drainage. The rainwater can also be diverted in right areas. This is useful for rainwater treatment. We are an eminent Permafloor Indoor Outdoor Flooring System Supplier. We offer our product at highly competitive prices.

Note : Please Contact Our Sales Representatives for Further Information

We are one of the leading COES HDPE Drainage Pipe and Fittings Suppliers. Our COES HDPE Drainage Pipe and Fittings Systems are automated from polyethylene. These are very elastic in nature and are also capable of resisting vibrations and mechanical stress. The variety of joint fittings and connections in the system can easily be connected to sanitary and sewage systems. We offer fittings having diam. of 32 to 315 mm.
 One of the other important characteristics of our product is that it does not break or develop fissures after long use, as the molecular weight of PF is very high. Our product can also absorb mechanical stresses of certain amount of intensity very easily. This applies especially to installation in seismic areas. The product provided by us is also known to be resistant to various operating temperatures ranging from -40o and +70oC. Our product can also easily handle peak temperatures, up to 95°C. The Pipes and Fittings supplied by us comply with UNI EN 1519 too. Procure HDPE Pipes and Fittings from us!

Note : Please Contact Our Sales Representatives for Further Information

Designed with utmost precision, Our Sahara Plast Welding Machine features in-built protective circuits provided to prevent over current, over heat, over voltage, low voltage, etc. We are a well-known Welding Machine Supplier in UAE. Made of PE, PP and PVDF. It can be operated in any complex work condition. Through variety allocation transformation, we can meet gas, communication, water supply, sewage, Fire, chemical, minerals, construction and aquiculture field by changing function of machines easily and quickly.

We are one of the leading HUGE PE Inspection Chamber Supplier. We are engaged in manufacturing preeminent quality HUGE PE Inspection Chamber Parts. The parts manufactured by us comply with EN 13598-2 standards. These are also certified by Turkish Standards Institute (TSE). Our product also has certifications from TR Ministry of Environment and Urban Planning Construction and Installation Analysis. We offer our PE Inspection Chambers at market leading prices. These can be fitted with various types of pipes easily. Our products are also known for having robust walls with excellent thickness.
Customers can place both large quantity and small quantity order with us. We ensure on time delivery and highest quality to customers. Our PE Inspection Chambers are very durable. These are made from superior quality materials and designed to deliver excellent performance. These also have long shelf life.

Note : Please Contact Our Sales Representatives for Further Information

We are reckoned as a leading supplier of advanced measuring technology. Our complete product portfolio includes Water Meters, Gas Meters, Heat Meters and Amr-Systems. Our products are deemed to be the most preferred choice in many field applications. We have a suitable product for every customer. Zenner GMBH Products provided by us are characterized by modular construction. These are also provided with appropriate accessories. We offer measuring technology for residential, municipal or industrial water supply. We are committed to product innovation, so participate in dialogues and discussions with customers and partners across customer groups and market segments.
We are a trusted Zenner GMBH Products Supplier in UAE. Manufactured from preeminent quality material, our products ensure long shelf life. We offer Zenner GMBH Products at highly competitive prices. Customers can place any quantity order with us. We have a reputation of delivering every order on time. We have never disappointed any customer with inferior quality products.

We are reckoned as one of the leading Plastitalia Products Suppliers in UAE. We feel complacent to inform about our complete range of Plastitalia Products. Our Plastitalia Products includes HDPE Pipes and Fittings, Injection Molded Fittings, Flange Gasket, and Stainless Steel Flanges. Our products are made from superior quality materials, so our products are highly durable. The Plastitalia Fittings provided by us have all necessary certifications from various famous agencies such as WRAS, WR-C, DVGW etc. Our products cater to various standards such as SDR7.4 PN25, SDR9 PN20, SDR11 PN16, SDR17 PN10, and SDR26 PN6.3.
We have been engaged in providing excellent quality Plastitalia Products at very nominal prices. We are committed to provide an endearing value for money to customers. We deliver the order on time and ensure no decay in quality during transit. Our products have long shelf life. We have never received any feedback from the customers regarding the poor quality of our products.

Glass reinforced plastic (GRP) is known to be a very unique and rigid material. Glass Reinforced Plastic Water Tanks provided by us are apt for the purpose of storing potable water. Our SEJIN SMC GRP Water Tanks are assembled well with PE coated tie-rods, SS:316 bracings, nuts and bolts. The Panel Type Bolted Tanks provided by us are highly demanded in market too. These are suited for ground and over head area. We offer our Glass Fiber Reinforced Plastic Water Tanks at market leading prices.

Complete Water Tightness: Special sealants are being used along with international patents for ensuring water tightness.

Rational Capacity Design: The use of several panel designs is made for designing tanks. The tanks can be of varying capacities, dimensions and shapes (L-shape, U-shape, square-shape).

Convenient Installation: While on-site installations are carried, standardized parts are used. This is done to bring the materials in restricted areas and so that the installation can be performed with ease.

Excellent Thermal Protection: The use of single panels is employed for installing water tanks underground. Insulated panels are also referred to as single panels with insulation material. These are used for creating good insulation on water tanks, which are installed outdoors.