SITECH Gulf dubai

Trimble GCS900 Grade Control System 3D Automatic Control   One of the most revolutionary changes in the way earthworks are performed has been the introduction of 3D systems originally by Trimble in 1995. The Trimble® GCS900 Grade Control System represents the next-generation 3D system from the company that invented 3D grade control. The GCS900 Grade Control System is a cutting-edge earthmoving grade control system that puts design surfaces, grades and alignments inside the cab. The system uses GPS/GNSS and laser, or construction total station technology to accurately position the blade or bucket in real time, significantly reducing material overages and dramatically improving the contractor’s productivity and profitability   TRIMBLE GCS900: WHICH MACHINE / WHICH SOLUTION?   The Trimble GCS900 is extremely flexible and can be used on excavators, dozers, motor graders, compactors, scrapers, trimmers, and milling machines. You may purchase the GSC900 outright or as an upgrade from a GCS600 Grade Control System. And with its CAN-based design, the GCS900 can be easily moved from machine to machine, as needed. Dramatic gains in production are possible by using the GCS900 system on many types of machines in your current plan.   To learn more about the different options – select a solution from the matrix below.   Using the different positioning technologies provides blade control to the following accuracies Trimble MS990 Smart GPS Antenna – blade control to 20-30 millimeters Trimble SPS930 or SPS730 Universal Total Station – blade control to 2-5 millimeters Trimble GPS with Laser Augmentation – blade control to 3-6 millimeters Using the different positioning technologies provides blade control to the following accuracies   Trimble MS990 Smart GPS Antenna – blade control to 20-30 millimeters (0.1 foot) Trimble SPS930 or SPS730 Universal Total Station – blade control to 2-5 millimeters (0.007 to 0.016 feet) Trimble GPS with Laser Augmentation – blade control to 3-6 millimeters (0.01 to 0.02 feet)           Download Brochure     Photo Gallery VIEW MORE  

The Trimble Site Tablet is a rugged, lightweight and fully connected field computer with a large, easy to use touch screen. It provides real-time data to construction professionals using built-in cellular connectivity and Trimble SCS900 Site Controller Software. By incorporating a cellular modem, laptop, GPS/GNSS and controller, Trimble has drastically advanced in-field computing and eliminated the gap between office design and field implementation. The Tablet is ideal for jobsite supervisors, foremen and project managers who coordinate activities from a vehicle.

The system uses two MS972 GPS receivers and solid state angle sensors to measure the precise 3D position of the teeth of the bucket. With accurate, 3D positioning of the bucket, the system guides the operator to quickly perform complex tasks and simplifies finishing slopes An optional AS456 Submersible Enclosure provide a water tight seal around the angle sensors, allowing the machine to be used for wet construction with far less assistance from divers and surveyors.

Asphalt Compaction The Trimble CCS900 3D Grade Control System for Compactor is the last machine to pass over your paving project, and mistakes during this phase can be very costly to fix. CCS900 will calculate the exact position of the machine and display a color map indicating the current number of passes and possible overlaps. With 2 infrared sensors you can also measure the surface temperature insuring the asphalt is at the correct temperature for compaction. Soil Compaction Successful soil compaction requires each layer to have proper thickness, density and moisture. If one layer is not strong enough either through under or over compaction the road could possibly fail. With the CCS900 Compaction Control System you can easily measure and record accurate pass counts and soil stiffness, insuring operators perform properly and giving clients confidence in your work.

GCS900 on terrain levelers and trenchers are available in 2D and 3D configurations. 3D configurations use either a single or dual MS992 GPS Smart Antenna and cross slope sensors to accurately control the terrain levelers depth and pitch, allowing the operators to cut through solid rock at 2% slope to profile. 2D Systems use an LR410 Laser Receiver, cross slope sensors and Spectra Precision rotating laser to control the elevation only. Most new Vermeer machines are standard Trimble Ready for quick installations.

The Trimble GCS900 3D Grade Control System for Dozers helps you achieve accurate finished grade with fewer passes. Design information and live cut/fill indications are displayed in the cab, allowing the job to be done safer, faster and without the need for survey stakes. The dozer blade control can be completely automatic or the operator can use the in-cab display and control the operation. The system provides real-time information for monitoring avoidance zones and simultaneously collects as built data as the machine cuts to grade. With VisionLink this information can be monitored remotely in your office.