Post Buy Requirement
SP
Abu dhabi, United Arab Emirates
Add Review

Our Products

TRAK EXTREME PADDLE TIRE

Designed around one of Skat Traks most famous tires, the Skat Trak Extreme Paddle Tire 30x13-14 has been created to support the larger, heavier, and higher horse powered machines that hit the sand. The Extreme sports a thicker design to provide a more sure footed grip while riding. Skat Trak extreme paddle tires also come with an optional Kevlar fiber mesh for even more rigidity and durability over the life of your tire. Find everything you need for your ride with Side by Side UTV Parts.

Product Details:



  • ATV Sand Traction Specialized

  • Thicker, larger tire design

  • Maximizes your rides performance power

  • Grips larger areas of sand

View Complete Details

UNLIMITED RAZOR BLASTER TIRE

SAND TIRES UNLIMITED focused on a pretty much ignored idea, Front Tires. Front tires for sand vehicles were just an after thought. Sand is to ATV's as air is to a plane and water to a boat. It all works the same. So, create a bigger tire and more footprint and you get more flotation. Sand moves away when you push off it and it moves around when you apply pressure to it. So, it follows that a front sand tire should turn through an unstable medium, like sand, just as rudders do on planes and boats. We gave this tire biased rudders. This biased rudder sand tire can be run forward or backward for more or less positive steering control.

*USE ONLY ON ATV 4 WHEELERS

View Complete Details

LED SAFEGLO WHIPS AREAL

DESCRIPTION



Our all newsuper200ledwhip for the 6 and over 150 leds for the 4. You wanted the brightest now we have it. This whip is incredible and has been engineered and manufactured here in the states. It boasts top quality workmanship. Be the first to have one in your camp!!


Specs:


Aluminum base with a steel threaded shaft
Poly carbonate pole Lexan
50, 000 hour rated leds 2 Amps


What you get:


Whip 6ft. or 4ft.
Red Safe Glo Flag
We recommend a 5 amp inline fuse with this whip.

View Complete Details

MOTLEY TUBE

The ZANheadgear Motley Tube is made from breathable, moisture wicking polyester to allow comfort in all climates. The versatility of the Motley Tube allows it to be worn multiple ways; a beanie, ear warmer, desert scarf, face mask, neck warmer, balaclava and more.

View Complete Details

RUGGED RADIO AND INTERCOM MOUNT

Install your Rugged Radios intercom and Rugged mobile radio in your newYamaha YXZ Sport UTV. This mount replaces the upper-center dash cubby to create a flush, clean mounting solution.


Includes all mounting hardware.


Dimensions:
W 10", H 4 3/4"


Works With:



  • RM-45-U Mobile Radio

  • RM50-U/V Mobile Radio

  • RM-60-V Mobile Radio

  • RM-100 Mobile Radio

  • RRP360 Intercom

  • RRP660 Intercom

  • RRP660 PLUS Intercom

  • RRP686 Intercom

  • RRP6100 Intercom

View Complete Details

RUGGED RADIOS WAVE ANTENNA

NGP (No Ground Plane), 1/2 wave base loaded antenna. Molded high heat ABS mounting base features silver soldered connections, gold plated push pin contacts and O-ring.


This is our most popular antenna, providing reliable performance in all types of conditions and applications. "No Ground Plane" means the antenna does not have to be attached to a metal surface (such as a vehicle roof or larger body panel). Although using a ground plane is always better, this NGP antenna performs great for all uses, drivers, teams, and applications.


All antennas are already pre-tuned (cut) for application. Simply order, mount, and ride!

View Complete Details

HEADSET AND WIRED HELMET PARTS

Stereo audio kit complete with speakers and 2 microphones.


Compatibility:



  • Compatible with all kinds ofhelmets

  • Compatible with Interphone Tour/Sport/Urban

View Complete Details

HEAVY DUTY RADIUS RODS

FEATURES & BENEFITS

  • Fits Can-Am Maverick X3

  • Triple rod configuration

  • Improved strength and rigidity over OEM

  • Direct bolt-on replacement

  • Turret design

  • Heavy duty adjustable end-links

  • High grade machined billet aluminum

  • Hard anodized finish

  • Made in the USA


DESCRIPTION

The Assault Industries turret style heavy duty radius rods for the Can-Am Maverick X3 are designed and manufactured in California using state-of-the-art machinery and aircraft grade materials.


This kit retains OEM clearance but adds incredible strength and rigidity over the factory setup. Assault Industries radius rods are machined from 6061 T6aluminum and hard anodized black with polished chromoly adjustable Heim joints.


This stylish kit will look amazingwhileperforming above and beyond OEM specifications!

View Complete Details

INTERPHONE USB DATA OR CHARGING CABLE

USB data/charging cable for INTERPHONE MC-XT Series, Offroad, FBeat, F5S and F5.

View Complete Details

HEAVY DUTY DRIVE SHAFT COUPLER

Looking to replace your weak OEM drive shaft spline coupler that is known to fail and leave you stranded? We have a solution for you! Our HD spline couplers are Cryo Heat Treated and REM polished. Over 200% stronger than stock with less friction!

Fitment: Fits all models and years YXZ 1000 including SS.

Includes:
-Tool steel Cryo Heat treated and rem polished coupler.
** Circlips.
** HD drive shaft sealed boot with clamps and synthetic hi temp hi pressure grease



DESCRIPTION
About the coupler:
Our coupler is a Tool steel Cryo Heat treated and REM polished. This gives it huge strength and greatly reduced friction.
-Cryo Heat Treated tool steel. (This it as tough as it gets)
-REM Polished for substantially reduced friction.
-Precision cut spline with no sharp or uneven edges.

About our Heavy duty boot:
Your stock OEM boot is simply poor quality and design. The boot is not sealed from the factory allowing the grease to escape and moisture to enter. This allows the parts to rust and the lack of lube creates friction. Make sure to check yours. We offer stock OEM ones as well as our upgraded sealed unit. We have a custom fit sealed silicone sleeve that replaces the stock boot that includes stainless clamps.

About Circlips:
The coupler has circlips in front and behind it that secure it in place and allow it a little movement to slide back and forth. We have seen many of the circlips break causing more issues allowing the coupler too much movement. For this reason we offer HD circlips that have been Cryo heat treated for extra protection. We also offer OEM replacements.

About grease:
2.82oz packet of Hi temp 500deg, Hi pressure synthetic grease. The packet gives you way more than you need for future use.

Notes:
**When installing make sure to grease all splines inside and out with wheel bearing type grease. We prefer to use high pressure bearing grease.
**Make sure to check the rubber boot for cracks and wear. It is cheap we recommend replacing it with our sealed boot.
**Make sure to check your circlips. If there broken or rusted we recommend replacing them.
View Complete Details

RACING CLUTCH COVER QUICK RELEASE KIT

DESCRIPTION
4 lanyard kit:
These pins install in place of your existing bolts that hold your clutch cover on. These become locators to push your cover over. 4 of these locators are pinned to put a clip through to hold the cover on. Simply pull the 4 pins and the cover is ready to come off. Takes just a few seconds.

11 lanyard kit:
Includes a lanyard for each pin. Recommended for people doing water crossings and will submerge the clutch cover.

These pins and lanyards hold your cover on tight. 4 is all that is needed unless you submerge your clutch in water. Adjust the pin depth to your liking to control the holding pressure.

Features:
-Stainless steel cnc pins.
-Stainless steel lanyards.
-Change a belt much faster.
-Easy installation.
-Lanyards hold clips so no lost hardware in the dirt during belt change.

Quick release 4 lanyard kit:
-11 Pins
-4 Lanyards
-4 Black rivets
-4 Washers
-4 Clips
View Complete Details

High Clearance Lower Rods

These high clearance lower rods are built from 7075-T6 aluminum and feature over an inch of ground clearance. This is aircraft grade aluminum and pretty much the strongest aluminum option for our sport. The ends house FK uniballs, the same series joints that the trophy trucks are running, there is nothing better. The middle (toe) link and upper radius rod are solid 1-1/8" 7075-T6 aluminum. The joints on those links are chromoly FK rod ends, again its the strongest joint made and made in the USA. The spacers in each joint are 303 stainless steel so strength and corrosion won't be an issue here.
This will allow for full adjustability of camber and toe.
Our business and products are based around using American products and material, we do not source cheaper parts or materials from overseas.

Here are some basic strength differences between 6061 and 7075 aluminum and how much stronger our lower radius rods are being made from 7075. What does this mean? It means ours won't elongate, stretch, bend, dent and even scratch like 6061 will. LIFETIME WARRANTY on our aluminum parts.

6061 Properties
Tensile Strength 45, 000 psi
Yield Point 40, 000 psi
Brinell Hardness 95
Elongation at Break 12%
Shear Strength 31, 000 psi
Strength to Weight Ratio: 115 kN-m/kg

7075 Properties
Tensile Strength 83, 000 psi
Yield Point 74, 000 psi
Brinell Hardness 150
Elongation at Break 10%
Shear Strength 48, 000 psi
Strength to Weight Ratio: 196 kN-m/kg

View Complete Details

CHENG SHIN DUNE HOPPER TIRES

C899 Dune hopper can easily handle extremely sandy or muddy conditions. It is tough 4 ply tube type tire. Chengshin Dune Hopper is 4 ply rated

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Skyline Performance & Trading (Skyline Performance & Trading)
  • Skyline Performance & Trading Shop NO-67/68, AI Firdous Building M3 Musaffah, Sanaiya Abu Dhabi,, United Arab Emirates
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/uae/company/skyline-performance-trading/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0005457720{main}( ).../index.php:0
20.01542028160include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.02892750464include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.03453686168header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice