Our Products
Base oils are important basic raw materials for any lubes, viz., engine oils, gear oils, industrial oils, metal working fluids, hydraulic oils & greases. In most of the lubricants 70-90% ingredient is base oils. As per API classification Base oils can be grouped majorly into five groups, i.e., Group-I/II/III/IV/V. The base oil characteristics are very important in determining the quality of the finished product.
Characteristics | ASTM Method | Results |
Appearance | - | Clear & Bright |
Color | D-1500 | Max 0.5 |
Density at 15 °C, kg/ltr | D-1298 | 0.85 |
Kinematic Viscosity at 40 °C, Cst | D-445 | Min 8 |
kinematic viscosity at 100 °C, Cst | D-445 | Min 2.28 |
Viscosity Index | D-2270 | Min 90 |
Pour Point , °C | D-97 | Max -6 |
Flash Point , °C | D-92 | Min 170 |
We at Sunrise Petroleum FZC, manufactures different grades of transformer oil to meet our customer requirements. Transformer oil or insulating oil is an oil that is stable at high temperatures and has excellent electrical insulating properties. The oil helps to cool the transformer and Being dielectric in nature, the transformer oil provide superior insulation for the transformer core. We offer the transformer oil in barrels, flexi bags & Road tankers
Characteristics | ASTM Method | ||
MIN | MAX | ||
ELECTRICAL PROPERTIES | |||
Electric Strength(BDV) | IS:6792-1992 | ||
a)New unfiltered oil, kv(rms) | 30 | ||
b)After filtration, kv(rms) | 60 | ||
Dielectric dissipation Factor (tan delta) @90 °C |
IS:6262-1971 | 0.002 | |
Specific Resistance, ohm-cm | IS:6103-1971 | ||
a) @ 90 °C | 35x1012 | ||
b) @ 27 °C | 1500x1012 | ||
CHEMICAL PROPERTIES | |||
Neutralisation Value,mg KOH/g. | IS:1448(p:2)1967 | ||
a) Total acidity,mg.KOH/gm | 0.03 | ||
b)Inorganic acidity/Alkalinity mgKOH/gm | NIL | ||
Corrosive Sulphur | Annex B(IS:335/1993) | Non-Corrosive | |
Presence of oxidation inhibitor, % | IS:13631-1993 | 0.3 | |
Oxidation stability: | IS: 12422-1988 | ||
a)Neutralistion value, after oxidation, mgKOH/g | 0.4 | ||
b)Total sludge after oxidation, % by Wt | 0.1 |
Characteristics | ASTM Method | ||
MIN | MAX | ||
PHYSICAL PROPERTIES | |||
APPEARANCE | The oil shall be clear transparent & free from suspended matter/sediments | The oil shall be clear transparent & free from suspended matter/sediments | |
Density@29.5 °C g/cm3 | IS:1448(P-16)-1990 | 0.89 | |
KinematicViscosity@27 °C, cST. | IS:1448(P-25)-1976 | 27 | |
Interfacial Tension @27 °C, N/M | IS:6104-1971 | 0.04 | |
Flash Point, °C ( PMCC) | IS:1448(P-21)-1992 | 140 | |
Pour Point, °C | IS:1448(P-10)1970 | -6 | |
Water content , PPM | IS:13567-1992 | 50 |